2,980 models
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
Based on the great model by @ KaliM. UPDATED VERSION v3 on December 1st 2024. Changes : Walls are thicker (3 layers) Vertical hole at the front is bigger: easier to guide tablets going in Hole to retrieve tablets is bigger (vertically &…
Print approx. €4.43–€5.41 excl. taxPreliminary estimate for one variant
If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Wall bracket for spray nozzles of an EAWONGEE 4000 pressure washer gun Printed in PETG MK4 IS 0.2 Filling 15%
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
Bob dishwasher funnel for easier re-filling of water
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
Print approx. €8.40–€10.27 excl. taxPreliminary estimate for one variant
Colored plates for Bergeron720's dishwasher sign . Supports single nozzle; no MMU required. Parametric. You need to download and print the base unit from Makerworld, then use this design for the insert plates. Customize You can customize…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Reduce some stress in your Mini-Z driving experience with this practice body inspired by the iconic Lamborghini Countach. It's designed to withstand occasional crashes and smoothly transition across different terrains, including hardwood…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Introducing the 3D-printable Berry and Fruit Washer with Drainer , a two-part kitchen essential designed to simplify your fruit washing routine . The innovative design includes a base where water collects and an upper compartment with…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Great solution to save the earth and still have the comfort of a straw! Fixed the file and resized it to 10 mm outer diameter glass straws -- Praktische Lösung, um die Umwelt zu schützen und trotzdem komfortabel Glasstrohalme täglich zu…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
Did you (or your child) promptly lose the two discs that came with the Spidey and his Amazing Friends disc dasher toy? This is a straight replacement and makes the toy work as intended again. The parts might require wet sanding to be able…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Just a washer for nails or screws
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
The toe kick brackets that came with my Miele dishwasher were cast aluminum and broke after a couple run ins with shoes. I modeled these, printed them in PETG, and installed them without any issues. Much better than paying $20 per bracket…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
I used ASA filament for printing this clip. Maybe PETG works also fine. PLA is not suitable for this use case.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
When the dishwasher air-gap is blocked, the water squirts onto your kitchen. This print allows that water to be redirected into the kitchen sink instead of the counter top.
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
This is meant so that you can wish utensils with a thin stem such as Chopsticks, Spoons, Forks, etc in the dishwasher basket without them falling through. IMPORTANT: The models are solid. In order for this to come out in the photos you…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work consider Buy me a coffee 😊
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This is a replacement backing to the “HANDLE LID FOR DECOR PLATE” part on an Asko D5624 dishwasher. It appears to be used on other D5xxx models as well. The original part number is 8084025 and is a single piece of ABS plastic. You can…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Ein Rad mit Halterung für Spühlmaschinenauszüge. Es passte bei Siemens und Constructa. Ich könnte mir vorstellen, dass es auch bei anderen Marken passt. Im Anhang befindet sich eine Druckdatei für PETG für den Prusa MK4, hier mit 100%…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
This prints a 40mm dishwasher wheel with the axle already printed in place. After the print you will need to break it loose. But then it works quite good. Only print in PETG or ABS. PLA will melt in your dishwasher.
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Krytka matice M6 včetně velké podložky. Použito v bytovém jádře v koupelně, šrouby drží světlo v chodbě. Doporučení k tisku: Vynucené podpěry na místě podložky, výplň 15%, materiál PLA.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Dishwasher cleaners have to be put upside down in the dishwasher so the cleaning agent can pour out when the membrane inside the cap gets wet. If your dishwasher has a tray instead of a cutlery basket this is quite annoying. I used to…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Edit 4-1-2024: Added a style without the internal structure. That allows for better washing during the dishwasher cycle and uses less filament and quicker print time. If you use those DIY KEURIG K-cups, then you know how annoying it is to…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Nachdem ich immer wieder davon genervt war das mir dir Spültücher vom Spülmaschinen griff herunter gerutscht sind hab ich mir schnell diesen kleinen Clip für meine Spül- und Handtücher entworfen. Er passt sehr gut auf einen horizontalen…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Materiál - PLA, PolyAir infill 100%
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
A simple case for the Joey GG cart flasher. Print both top and base parts large flat surface down no supports required. Qty 2, M3x15mm (or 10mm) screws required to hold the case together. Qty 4 rubber stick on feet (optional) - I always…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
coin de remplacement pour lave vaisselle professionnel - replacement corner for professional dishwasher
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Insert pro stolní hru Dračí zuby. Rozměry: 252 x 252 x 37 mm Tisknul jsem na MK3S+, tryska 0.4 mm, vrstva 0.20 Quality, PLA.…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
Base The base includes bolts , nuts and washers of M2 - M48 . Separately models are placed in specific folders. All data collected in All_in_one.dwg file (autocad). !Attention! Be careful when using for accuracy critical parts (or use…
Update: 2025-11-13: Added a remix for a laser-cuttable model. https://www.printables.com/model/1479675-dishwasher-tablet-dispenser-laser-cut-version Dishwasher Tab Dispenser – Sturdy & Simple A no-nonsense, ultra-durable 3D-printed…
Inspiriert von vorhandenen Beerenwaschschalen – dieses Modell wurde vollständig neu konstruiert und besteht aus nur einem Teil. Zum Einsatz einfach ins Spülbecken stellen und Wasser einfüllen. Dabei entsteht ein Strudel, der die Beeren…
This automatic fruit and berry washer is lightweight for its size, requiring less than 200g of material to print, and performs exceptionally well Simply turn on the water, and it handles the rest efficiently. It is ideal for fruits,…
Changelog: Changelog 30.07.24 New Gridformat added (3x1, 3x2, 3x3) with heights from 4U to 14U 26.07.24 Request fulfilled by @manofthesky_692784 : Magnetsocket added 18.07.24 STL files added as an alternative to 3mf format These…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
fruit washer for fruits. wash your fruits easily
Saw a few of these posted, but decided to design my own. A half twist of the knob switches between "Cllean" and "Dirty". I printed the Letters.stl in 2 colors. The first 1mm was the printed in the desired letter color (white). The rest…
Here is a very simple OpenSCAD source file to create washers of any size. There are three variables at the top (outer and inner diameter, and thickness) change them to suit your needs. Printed at 100% infill the washers are surprisingly…
Updated 10/16/2024 to fix problematic lever, with new meshes and .f3d --- Nothing too special here. We wanted a simple clean/dirty indicator for the dish washer. Sticks to the dishwasher with some embeded magnets. Included fusion file for…
🔩 Washers Collection 2 – Imperial & Metric Sizes 🔧 I greatly appreciate every like, comment and download! 🛠 A versatile set of printable flat washers designed for various bolt sizes . Perfect for DIY projects , mechanical mockups , and…
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
Multicolor dishwasher sign no painting/MMU The sliding mechanism feels very satisfactory because the magnet makes it snap into place. I printed everything at 100% for a snug fit. So the text plates and magnets don't require any glue, i do…
A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…
M3 Metric style washers in 9 variations of outside diameter: 7, 8, 9, 10, 11, 12, 13, 14, 15 mm.
fruit washer and drier. small and large. can also do vegetables.
Needed some washers, decided to make my own after some usual metric DIN standards. DIN 125 - Washer DIN 9021 - Big Washer DIN 6796 - Load washer
Introducing the StreetBasher. A high performance AWD 1/7 scale street drift car. Engineered for enthusiasts who appreciate the thrill of DIY projects, the StreetBASHER is not just a RC car, it's an experience waiting to be crafted.…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
Designed for storing 1kg of dishwasher tablets. Tablets dispense automatically due to the sloped interior. Print orientation:
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
It's kinda awkward to pour in fluid under the frunk, so hopefully this will make it easier. It fits really well, snug but loose enough for guaranteed fit by any printer. I drew a compact washer fluid funnel for Tesla Model 3 using…
Hope this helps somebody out took a long time to make so if you can I would greatly apreciate a like, download or both thank you! If your slicer asks you to recalculate the object select the option NO.
This is my take on a dirty/clean dishwasher indicator. There are some amazing versions of this print out there, but this was how I wanted mine. Print Instructions PETG seems to work well at 0.2mm layer height. Try out some more materials…
I like the vertex fruit washer from Perinski , but it requires support for nearly the complete bottom. This model is a fixed version. It requires minimal support and prints nicely. If you wonder if this really works, it does. Kids love…
New gadget for your kitchen - Dishwasher tablet dispenser. WAF (Wife approval factor) near 100%! Mounted on double sided tape in any place you want. Also could be mounted angled. Tablet size up to 30mm x 40mm. If your tablets doesn't fit,…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Fruit washer bowl from Thorin Oakenshield. Fits on the 220 by 220 mm buildplates of the Ender 3/K1 variants.
Fender washers in all of the sizes typically sold in assortment packs. Parametric f3d included for custom sizes. Public domain license. UPDATE 2026-05-14: Re-rendered all STLs with correct inner diameter. Previous ID was set to exact…
Dishwasher Door Prop Opener: A 3D-Printed Solution for Moisture-Free Dishes Overview Is your dishwasher retaining moisture long after the wash cycle is complete? Say goodbye to musty smells and hello to sparkling, clean, dry dishes!…
M3 HEX bolts collections. Threat pitch : 0.7 sizes: m3x5 m3x8 m3x10 m3x12 m3x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your printer…
Help: Every washer is 1mm high , if you want higher washer just scale it in Z direction by this formula to get desired height : height[in mm] = percentage/100 ID - Inner diameter, OD - Outer diameter Expectations: Don't expect a washer…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
M8 HEX bolts&nuts collections. Threat pitch : 1.25 sizes: m8x5 m8x8 m8x10 m8x12 m8x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
M4 Metric style washers in 9 variations of outside diameter: 9, 10, 11, 12, 13, 14, 15, 16, 17 mm.
This is the dishwasher indicator I've had stuck to my dishwasher for the past few months. I saw that there was a mechanical marvels contest going on and figured now is as good a time as ever to publish the work! If you ever dreamed of…
M5 Metric style washers in 9 variations of outside diameter: 10, 11, 12, 13, 14, 15, 16, 17, 18 mm.
Need a custom-size spacer or washer? Just plug in inner diameter , outer diameter , and thickness , and export an STL
M6 HEX bolts&nuts collections. Threat pitch : 1 sizes: m6x5 m6x8 m6x10 m6x12 m6x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
M6 Metric style washers in 9 variations of outside diameter: 12, 13, 14, 15, 16, 17, 18, 19, 20 mm.
M5 HEX bolts&nuts collections. Threat pitch : 0.8 sizes: m5x5 m5x8 m5x10 m5x12 m5x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
so fun to print and use but support may be needed
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…
Windshield Wiper Washer Fluid Reservoir Tank Bottle Cap (For Peugeot and other cars). Printed in TPU (230/50), without supports. Included Solidworks file for editing and customizing :) Print instructions Category: Automotive Summary…
M8 Metric style washers in 9 variations of outside diameter: 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
Summary This is a 3D-printable flasher pattern based on the work of Shannon Zirbel, Robert Lang, and several others. It demonstrates the ability of the flasher pattern to go from a flat state to a much more compact, folded state, all…
M4 HEX bolts collections. Threat pitch : 0.7 sizes: m4x5 m4x8 m4x10 m4x12 m4x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your printer…
Tired of ugly screw heads ruining the sleek look of your 3D printed parts or woodworking projects? Welcome to the Ultimate Countersunk Washer Collection . This comprehensive hardware set is engineered with precision to perfectly hide…
These M2 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
V2 Version 2 has some corrections after community feedback. V1 and V2 parts should be compatible Main body now has a slope so tablets slide out better Opening on the front is slightly bigger Printing Instructions The design is split so…
A jig for stamping your bitcoin mnemonic on DIN9021 M8 washers with 24mm outer diameter. Because of endless warping issues with the original “blockmit” V3 jig design, I made a new, more printer friendly design. Adjust for your stamps and…
Collection of washers including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
dishwasher sign clean/dirty print-in-place This is a Remix of Sliding Word Changing Dishwasher Sign by middlefingerboss Thank you for this great idea! I am not sure if this is the best idea I have had so far. Designing this as an assembly…
An easy “my first TPU” print for those starting out - and very useful. Presenting a simple garden hose end washer - complete with little tabs to prevent it from falling out once installed in your hose nozzle or sprinkler head. Update:…
Yet another Dishwasher Label Features: Different colours for ‘CLEAN’ vs ‘DIRTY’ Slide easy side to side and wont come out No Multi material required Give it a try
for my Dishwasher i have created 180x60x132 Print instructions I have printed it with "Black EasyABS filament 1kg - Diameter : 1,75 mm " Works fine ;) Don't print it with PLA for dishwasher!!!!!! :D
I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…
