Search results: audio

Sort order

1,049 models

P
PrintablesSten

ESP32 Audio Kit V2.2 Housing

The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
634
Likes
32
Rating
0
P
PrintablesNotARealDragon

Audio Technica ATH-M50X hinge fix

Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
505
Likes
33
Rating
5
P
PrintablesSkovik

Audio Cassette Box (Obal Audiokazety)

Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…

Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
452
Likes
77
Rating
5
P
PrintableshanysX

Audio Cassette Tape Tab Out To Tab In Conversion Plug

Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
211
Likes
19
Rating
5
P
PrintablesTronnic

Quest 3 (&2) Audio Mod - Headphones KOSS Porta Pro for BOBOVR M3, M2 & ELITE Strap

Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant

Downloads
202
Likes
45
Rating
5
P
PrintablesCopyRited

Audio Technica ATH-M40x/50x Earcup Shells

Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…

Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant

Downloads
195
Likes
42
Rating
0
P
Printablesnmk

d&b audiotechnik Y-Series ground stack 1:10 scale

you can do the rigging with 1.75mm filament. check "extra perimeters on overhangs" if you want to print without supports. d&b is a german audio equipment manufacturer.

Print approx. €4.44–€5.42 excl. taxPreliminary estimate for one variant

Downloads
158
Likes
11
Rating
0
P
PrintablesCopyRited

Audio Technica AT2020 Mic Stand

I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…

Print approx. €3.57–€4.37 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
9
Rating
0
P
Printablesnmk

d&b audiotechnik keychain

d&b is a german audio equipment manufacturer

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
2
Rating
0
P
Printablesmarleysan

Audio Technica ATH-M40x - earcup hinge range limiter

Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…

Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
9
Rating
0
P
PrintablesTeraflop

Private Property No Trespassing, No Soliciting, No Flyers Sign, 24 Hour Audio and Video Surveillance

PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
11
Rating
0
P
PrintablesNoxispike

8" Subwoofer Adapter Ring for Polk Audio DB 842 DVC on 10th Gen Civic Hatchback

Made specifically for Polk Audio DB 842 DVC, which has a 96.5 mm top mounting depth and a 196 mm diameter octagon screw pattern. The Polk sub is a great step up from the factory subwoofer without amp upgrade (my Civic comes with a 540W…

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
6
Rating
0
P
PrintablesVoidFusion

Arturia MiniFuse Audio Controller Under Desk Mount

This bracket is specifically designed to allow the user to mount a MiniFuse audio controller under their desk. It requires 2x 2x10mm self tapping screws to mount into the desk if the desk is solid wood. You will likely need something…

Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
5
Rating
0
P
PrintablesLiquidTelemetry

Angled Stand for Focusrite Scarlett 16i16 (USB Audio Interface)

This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
5
Rating
0
P
PrintablesWlezley Lishack

Bargraph Panel for TIPA PT041 Audio Spectrum Analyzer

Bargraph Panel for TIPA PT041 - Audio Spectrum Analyzer . Holder for 80 LEDs in size 2 x 5 mm. Nothing special, but it might come in handy. :)

Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
0
Rating
0
P
PrintablesGeooper

Shiit Audio Valhalla Tube cover

Cover for Shiit Valhalla Tubes Protect your tubes from dust or against damage Advice: Use only when tubes are cold Designed in Autodesk Fuson 360 Print instructions For print used PM Black PETG Advice use PETG, ASA, ABS or PC as Tubes…

Print approx. €3.21–€3.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
0
Rating
0
P
Printablesn00blike

Cambridge Audio AXR100 remote holder

Cambridge Audio AXR100 remote holder with room for 1.26 inch x 1/8 inch disk magnet 1.26 inch x 1/8 inch magnets Printed on a MK3.5S 0.6mm nozzle Orca Slicer 2.3.0 0.35mm layer height textured powder-coated Print Sheet

Print approx. €1.71–€2.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
1
Rating
0
P
PrintablesMatthew M

M-Audio AV30/AV40 Volume Knob Holder

I could not find a replacement for this easily damaged part so I created and printed my own. I printed this with a white filament and you can still see the blue light come through but it would be better with a more transparent filament.

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
PrintablesMrDefaultUser

Audio-Technica ATH-M40X hinge (left & right)

Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.

Downloads
1,964
Likes
70
Rating
4.9
P
PrintablesHexiBase

HexiBox Series: Tang Band W5-1138SMF / Dayton Audio DMA80-8 2.1 Backpack Speaker

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,576
Likes
244
Rating
0

NexGen3D: Lenovo Legion Go Audio Enhancement Protective Case

Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…

Downloads
903
Likes
69
Rating
5
P
PrintablesS95Sedan

Quest 3 - Deluxe audio strap adapters.

Adapters to use a HTC Vive deluxe audio strap on a Meta Quest 3 headset. Curved version (1.5) should be very close in fitment. However if you have issues printing them and rather use the flat version you can aswell, heat them so they are…

Downloads
850
Likes
74
Rating
5
P
PrintablesSchreibmaschine

Customizable 19" Rack Rails for Audio/IT Gear

About I love 19 inch rack gear and I try and rackmount everything I can in my audio and home tech setup. Cutting aluminum beams isn't always an option so I thought I would make a custom setup for my electronics workbench to tidy up the…

Downloads
795
Likes
272
Rating
4.86
P
PrintablesJezzaWalker

Modular Lever-Based Audio Cassette Tape Organizer

This is an audio cassette organizer with a dispensing mechanism (tape delivery mechanism?) inspired by the ones in Kalmar Designs organizers. The inspiration to make it (and to make it modular) came from this great project on Thingiverse.…

Downloads
787
Likes
182
Rating
5
P
Printablesywabiko

Pimoroni Pirate Audio Case

(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…

Downloads
771
Likes
47
Rating
4.75
P
PrintablesLukasz M

Lenovo Legion Go - Audio Enhancer

Sound directing adapter For Lenovo Legion Go

Downloads
630
Likes
45
Rating
0
P
PrintablesBen Ford

Speaker Boxes for Dayton TCP115-4 / CE65W-8 Cambridge Audio Minx Inspiration

This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…

Downloads
613
Likes
77
Rating
5
P
PrintablesBrandon

AudioMoth Vault v3

Protect and mount your AudioMoth (a full-spectrum acoustic datalogger) in style. The AudioMoth Vault v3 is a highly-water-resistant case designed for field usage, which you can make with about $3 in materials, in under 3 hours, on any 3D…

Downloads
590
Likes
122
Rating
4.75
P
PrintablesOzmale

Manual winder for Audio Cassette

This is my first ever 3D design. Am open to constructive criticism I designed the manual winder from scratch myself with the exception of the “Crank Handle”. Credit must to to “adafruit” for his handle design.…

Downloads
524
Likes
85
Rating
4.75
P
PrintablesTomson Design

Dayton Audio 4" Subwoofer enclosure

The walls are 13mm and i made the volume at recommended for a vented enclosure excluded the speaker. It's built with tongue and groove for easy and strong assembly. Use low viscosity glue. The TCP115 is a very good woofer for the money. I…

Downloads
505
Likes
79
Rating
4.5

Airbus A320 Audio Control Panel Reception Knob

Model for the 15 Reception audio level control knobs on the Airbus A320 ACP. Not a perfect replica as the real knobs are illuminated when released out and have a collar that fits into the panel, but for me, close enough. Printed in matte…

Downloads
489
Likes
40
Rating
5
P
PrintablesHexiBase

HexiBox Series: Audio Dynamics AD2206 Bass Tube

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
488
Likes
73
Rating
0
P
PrintablesHexiBase

HexiBox Series: Audio Dynamics AD2210 Car Audio Subwoofer

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
462
Likes
93
Rating
5
P
PrintablesPowerplay

Pimax Crystal "Audio Booster" (SMAS) Update 11.11.24

Da mir der Sound von den SMAS Lautsprechern viel zu leise war habe ich mir diese Trichter konstruiert und gedruckt um mehr Lautstärke zu bekommen. Mit dem Audio Booster ist es ca. doppelt so laut Mit Ohrpolster ist das mindestens 3x so…

Downloads
459
Likes
26
Rating
5
P
Printablesfelixna

Audioengine A2+ desktop speaker stand

I was gift a pair of Audioengine A2+ desktop speakers. As good as they look, this speakers only sound good as desktop speakers when you sit in front of it and they are directed towards your head. Since no stand came with the boxes, I…

Downloads
457
Likes
29
Rating
5
P
PrintablesH28Q-Apex

Steinberg UR22C - Audio Interface - under desk mount

I remixed the mount to fit perfectly to the Steinberg UR22C - Audio Interface

Downloads
452
Likes
47
Rating
5
P
Printablesmpkarlo

Audio Cable Clip

This is a small cable clip that can hold a standard 3.5 mm auxiliary cable, and help keep it tidy. It can be placed on a desk or can hang from the audio device depending on which end you loop twice through it. To use it, snap the cable…

Downloads
449
Likes
78
Rating
5
P
PrintablesÉLETHER

IKEA SKADIS Porte casque audio / headphones holder

FR: Il peux porter des tailles de anse jusqu'à 45mm EN: It can carry bight sizes up to 45mm

Downloads
443
Likes
29
Rating
5
P
PrintablesAaron

Audio-Technica ATH-M40x Swivel and Yoke Replacement

While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…

Downloads
423
Likes
22
Rating
4.5
P
PrintablesBigscreen

Bigscreen Beyond Audio Strap - Official CAD Data

The official Bigscreen Beyond Audio Strap CAD model data! Useful for designing modifications or replacement parts, or for 3D printing accurate models. (Please remember to refer to your Bigscreen Beyond warranty as certain modifications…

Downloads
414
Likes
26
Rating
0
P
PrintablesHexiBase

HexiBox Series: Dayton Audio DCS165-4 6.5" 6th Order Bandpass

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
392
Likes
33
Rating
0
P
PrintablesJake

Gridfinity audio cassette tape holder

Gridfinity compatible tape holder/organiser. 4 tape version is 2x3x2, 8 tape version is 4x3x2. You can fit this, loaded with cassettes, into IKEA ALEX drawers. Fair warning: I had some issues with warping when printing these, so a brim is…

Downloads
376
Likes
71
Rating
5
P
Printablesron

Modular case for Raspberry PI4 and an HiFi hat (Audiophonics, Hifiberry) or custom

Maturity Very Good 12 prototypes. In use since 2023/10. Model design from scratch. Hardware Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing…

Downloads
372
Likes
29
Rating
5
P
PrintablesJay_L

Meta Quest 3 Head Strap Clip for Vive DAS Frankenquest 3 Oculus Deluxe Audio Strap

This is a remix of the one made by Sekazi. Its been modified to fit the quest 3. Ensure you print it standing up (default orientation of the model) with supports otherwise the clips will break. It is a bit of a squeeze to get it in place…

Downloads
371
Likes
43
Rating
5
P
PrintablesRayne

Bigscreen Beyond to Vive Deluxe Audio Strap Kit V2

This is a kit I made to make the Vive DAS (Deluxe Audio Strap) useable with the Bigscreen Beyond Thank you @whinnyrab (RockyRob) for images and testing as I'm still waiting for my Beyond to be made. Thanks to @CompatibleVRC for helping me…

Downloads
358
Likes
18
Rating
5
P
PrintablesSteeve18

Headphone support / Support casque audio

Stand for headphones 21 cm high. About 2.47 ounce. Printable in 1 piece with no overhang. Leave me a like! Support sur pied pour casque audio 21 cm de haut. Environ 70 grammes. Imprimable en 1 pièce sans surplomb. Laissez moi un like !

Downloads
355
Likes
22
Rating
5
P
PrintablesCastIronFace

Small Audio Mixer Stand

This is a a stand I built to elevate a small 12 channel audio mixer, Behringer 12 XENYX. If you print this using the stl files, you will need to create two sides with one mirrored. Don't worry about cleanup, the little bit of elephant…

Downloads
354
Likes
53
Rating
5
P
PrintablesKibbieKatt

MattHub Case Mount with Lid for Bigscreen Beyond Audio Strap

This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…

Downloads
348
Likes
12
Rating
0
P
Printablespoprhythm

Cable Tags - Lightning, USB, Ethernet, Audio, Power

I was asked to make some tags for charging cables for use by elementary school age kids. After not finding any that looked durable enough, I designed these to withstand heavy every day usage. There are several different sizes, use a…

Downloads
340
Likes
62
Rating
5
P
PrintablesKotyarko_O

Bmw E30\32\34\36 reverse audio device side covers (OEM: 65 12 6 907 823)

Bmw reverse (rds\non-rds\bavaria\business) audio device side covers. OEM-number: 65 12 6 907 823 This device can be used on Bmw E30\E32\E34\E36. Reproduced with the example of original part. Perfectly fits and holds on its original place.…

Downloads
336
Likes
42
Rating
5
P
PrintablesStaldy

K7 – Audio Cassette with USB Flash Storage

Note: Support required! No AMS/MMU required! The different parts are printing separately, making the print accessible to everyone. A changelog is available at the end of the description to keep you updated on recent additions and…

Downloads
334
Likes
297
Rating
5
P
PrintablesVilma Audio

DIY HiFi Headphones (Vilma Audio)

READ BEFORE PRINTING! HIFI doesn't need to be expensive. I designed headphones that actually sounds good and balanced. Easy to drive. No powerful headphone amp needed. Designed to be printed with little supports. Only small supports…

Downloads
334
Likes
79
Rating
5
P
Printablesaceofspace

500 Series audio rack - 1U blank plate

Blanking plate for a single slot of a 500 series audio rack. Simple print back side down.

Downloads
332
Likes
16
Rating
5
P
Printablesjmutchek

Speaker Stand (Audioengine A2+)

These simple stands hold my Audioengine desktop speakers up at an angle to improve the listening experience. Print instructions I printed these on their side with 0.20 mm layer height, 15% infill and automatic supports. You should only…

Downloads
329
Likes
46
Rating
4.75
P
PrintablesTomson Design

Dayton Audio DMA80-8 3" satellite speaker

I made a Enclosure/Satellite speaker for Dayton Audio DMA80-8 3" Dual Magnet Aluminum Cone Full-Range Driver with Dayton Audio DMA80-PR 3" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is 8mm…

Downloads
324
Likes
43
Rating
4.5
P
Printablesdirkmeineke

IQaudio DAC Pro Case

This is remix of Stamos fantastic Hifiberry Case . The original model was modified as follows dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT the case was extended in height to allow using the GPIO pins a hole…

Downloads
318
Likes
19
Rating
0
P
PrintablesKerti

Bluetooth Audio Receiver case

I made a mini case to this Bluetooth Audio Receiver: https://www.aliexpress.com/item/1005002231624213.html

Downloads
309
Likes
31
Rating
5
P
PrintablesDigital Juice

AIYIMA 2Pcs 2 Inch Portable Audio Speaker 4 Ohm

AIYIMA 2Pcs 2 Inch Portable Audio Speaker 4 Ohm 8 Ohm 10W Mini Full Range Sound Loudspeaker DIY Multimedia Speaker Home Theater https://www.aliexpress.com/item/1005005997167223.html?spm=a2g0o.order_list.o

Downloads
309
Likes
30
Rating
4.5
P
Printablesmotocoder

Pedal plates for Temple Audio templeboard guitar pedalboard

These are 3D printable equivalents of the mounting plates used with Temple Audio's pedalboard. Using some mounting tape, you attach one (or more) of these to a guitar pedal. The mounting plate alignment nubs and center screw go through…

Downloads
309
Likes
40
Rating
5
P
PrintablesCed

Steinberg UR22C - Audio Interface-Nid abeille

Le modèle original est déjà très bien, j'ai juste ajouté le nid d'abeille sur les faces pour l'esthétique et l'économie de matière. Merci au créateur pour sa création (Effectuer une symétrie de la partie droite pour la partie gauche du…

Downloads
308
Likes
26
Rating
5
P
PrintablesBald Man

Tighter and stronger REMIX of the Meta Quest 3 Head Strap Clip for Vive DAS Frankenquest 3 Oculus Deluxe Audio Strap

Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.

Downloads
298
Likes
38
Rating
4
P
PrintablesHexiBase

HexiBox Series: Dayton Audio ND65-4 Rear-Loaded Horn

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
293
Likes
41
Rating
0
P
PrintablesJoe

Footswitch Barefoot Topper / Caps (for Fractal Audio FM3, FM9, FC6)

These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…

Downloads
278
Likes
32
Rating
5
P
Printablesfloe

Audio jack blind plug 3.5 mm

A blind plug with an end plate to cover unused 3.5 mm audio jacks.

Downloads
274
Likes
17
Rating
0
P
Printablesryantollefson

Nest Audio - Wall Mount

Wall mount for a Google Nest Audio. Very simple print, no supports required. I used Jessie's PETG with 0.20mm layer height, but anything should work. Instructions: It is easier to feed the plug through the hole before mounting it to the…

Downloads
272
Likes
23
Rating
5
P
PrintablesTurnt

Google Nest Audio Wall Mount

Howdy, This is my wall mount for a Google Nest Audio. I wanted to put it in the outside entertainment area away from the elements. It's simple enough and secures the speaker really well. The ring is a snug fit but isn't at all difficult…

Downloads
266
Likes
28
Rating
0
P
Printableswafflecart

Teenage Engineering OP-1 travel hard case | DJ audio accessory

A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…

Downloads
256
Likes
46
Rating
0
P
PrintablesBröake Atelier

Audio Jack Dust Cap Cover Plug for 6.35mm or quarter inch & 4.4mm Pentaconn

Made a dust cap/cover/plug for my desktop amp cuz I usually use it's RCA out at the back instead. Tryna prevent dust buildup and also perhaps slow down any oxidation on the contact Made one cuz I couldn't find one online. Available in f3d…

Downloads
255
Likes
32
Rating
5
P
PrintablesAlexander

RCA dust cap - for cinch audio cable

RCA connector dust cover. Stays on great but comes of easy with the little groove in the top. I printed 32 now for my home cinema set. :) Just a 10min print @ 0.15mm PETG and only uses 0,2 meters of filament. :)

Downloads
254
Likes
28
Rating
0
P
PrintablesAT3D Sim Shop

VRS and Heusinkveld Sprint Pedal Mounts for Dayton Audio TT25 Transducers

Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…

Downloads
247
Likes
22
Rating
5
P
PrintablesPilotreyes

PreSonus Audiobox USB96 Underdesk Mount

I was wanting to maximize my desk space so I created this underdesk mount for a PreSonus Audiobox USB96.

Downloads
246
Likes
13
Rating
5
P
PrintablesBarnJoey

Behringer U-Phoria UM2 audio interface under desk mount

This is a mount for a Behringer U-Phoria UM2 audio interface. didn't like how it took up desk space and also how it would get dusty after a while so designed a mount so that it can sit under the desk. uses 4 tiny screws (guitar screws…

Downloads
246
Likes
23
Rating
5
P
PrintablesLars Tiede

Dayton Audio TT-25 PUCK mount for Heusinkveld Ultimate Plus pedals

General notes about the model This is an adapter for mounting a Dayton Audio TT-25 “puck” bass shaker to the back of Heusinkveld Ultimate Plus pedals. It should work on any of the pedals, but I only tried the accelerator and brake. The…

Downloads
238
Likes
16
Rating
0
P
PrintablesAmazingSpanoMan

Mackie Audio Mixer Replacement Slider

Got an old Mackie mixer to use as part of a video job. Of course it was missing a volume slider for one of the channels. Here is the replacement I created built from dimensions taken from one of the original sliders. After review of the…

Downloads
225
Likes
20
Rating
4
P
Printablesxxblyxx

Fanatec CSL Pedal Bass Shaker Dayton Audio TT25

These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…

Downloads
224
Likes
28
Rating
5
P
PrintablesElizer

Oculus Quest 2 Audio Amplifier (V2)

(V2 beefed up the the parts some users said was weak an prone to breakage, and some minor rounding's of corners) Helps with the sound quality and volume a bit(and possibly some isolation), For a demo hover cupped your hand over your ear…

Downloads
223
Likes
25
Rating
5
P

Support casque audio

Support mural pour casque audio

Downloads
223
Likes
9
Rating
5
P
PrintablesMyStoopidStuff

Headphone / Audio Jack Extender (Under Desk or Wall Mount)

The audio jack on my PC is hard to reach so I made this extender which I mounted under my standing desk. It uses a cable strain relief boot that I printed in TPU, and I recommend using TPU for the cable boots. However, since TPU is still…

Downloads
222
Likes
54
Rating
5
P
Printableschocpretz

Fosi Audio TB10D 8020 sim racing mount

Mount for the Fosi Audio TB10D amplifier https://www.amazon.com/dp/B08MJBG53V?psc=1&ref=ppx_yo2ov_dt_b_product_det I designed this up quickly to be able to mount these amps on the side of my sim rig to drive some bass transducers /…

Downloads
219
Likes
12
Rating
0
P
Printablesludo ludo

ps5 controller wall mount open audio

fit parfaitement avec la manette , support stable et discret . offset d un scan 3D . impression via flsun v400 RAFT + SUPPORTS

Downloads
219
Likes
17
Rating
2
P
Printables5ch4b381

Bluetooth Audio Receiver case (Black PCB)

Bluetooth Audio Receiver case for BLE Audio Receiver module with black PCB.

Downloads
216
Likes
24
Rating
4.5
P
PrintablesRacknos

Caps for ALL! Ultimate Dust Cover & Cap Collection for PC, Audio & Power – Standard & Pull-Tab Versions

Update: Some models have been added and others removed. Not all of them have been physically test-printed by me yet, so I am taking some time to review, refine, and improve them gradually. I will be posting fixes, updates, and brand-new…

Downloads
214
Likes
147
Rating
5

Full Range Speakers, 4" Dayton Audio RS100-4

I've been working from home for over a year and felt my PC desktop audio system needed an upgrade. These full range speaker are based on the Dayton Audio RS100-4, 4 inch driver. I 3d printed the cabinet shown here in PLA and I've now…

Downloads
214
Likes
33
Rating
0
P
PrintablesNobody3D

Deej Audio Mixer / Fader Enclosure

Enclosure for 5 75mm x 9mm faders and an Arduino Pro Micro. Size is about 10x8cm. The bottom is held on with M2 screws. I use it together with the awesome deej software. To keep it from moving around a "sticky gel pad" found on aliexpress…

Downloads
210
Likes
20
Rating
0
P
Printablesthorn

stackable modular lever-based audio cassette tape organizer

An audio cassette organizer inspired by Kalmar Designs. Made to snap together. Modified to stack and rework the sides.

Downloads
209
Likes
53
Rating
5
P
PrintablesAXUL

Enclosure for Wuzhi Audio ZK-502C HIFI Stereo Bluetooth 5.0 TPA3116 Digital Power Audio Amplifier board 50W Stereo

Uses the screws and spacers that came with the amplifier board kit. Steps to assemble: 1. First prepare the top part by fastening the spacers with 4 screws on it. 2. Place the board into the bottom of the enclosure 3. Slide the top part…

Downloads
209
Likes
23
Rating
0
P
PrintablesSteenholdt

M-audio M-track Duo mount

I needed a mount for my M-audio M-track Duo, so that it could hang on the side of my desk instead of taking up space on my table. Printed flat (as in the stl) with tree support on overhangs only. 2 walls, 15% infill is sufficient. Printed…

Downloads
206
Likes
21
Rating
5
P
Printableslanwanman

Fosi Audio V3 Mono Monoblock Amplifier Stand

The Fosi Audio V3 Mono is an incredible piece of engineering, but it uses its entire aluminum chassis to dissipate heat. When sitting flat on a desk or stacked, airflow to the bottom of the unit is restricted. This stand helps solve the…

Downloads
204
Likes
11
Rating
5
P
PrintablesMalax

Audioengine A2+ Speaker Stand (Multiple Angles)

Another Audioengine A2+ Speaker Stand. This one features options for multiple angles for optimal listening experience. Print on the side for a nicer surface. Includes insets on the bottom for anti-slip rubber feet with a diameter of 10mm.

Downloads
204
Likes
10
Rating
5
P
PrintablesGuybrush T.

GBS Control Enclosure Stock or Custom with HDMI+Audio

This enclosure for a custom GBS Control is based on Lord Voultar's excellent build guide for a GBS 8200 with some additions of my own. I've replaced the VGA output port with an HDMI converter wired in (Because who want's that clunky…

Downloads
200
Likes
17
Rating
4.25
P
PrintablesDaniel

Fosi Audio K5 Pro Shelf holder

a holder to mount the board under a shelf you need 4 screws 3.5 x 12/16 mm

Downloads
199
Likes
18
Rating
4.5
P
PrintablesDylan Kirby

DD audio 5x7 grill assembly for Apache 1800 case

Designed for the Apache 1800 case, for one DD audio RL-X5x7 driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 8 m4 heat set inserts, and is mounted with 8 m4x8mm screws. The jig has…

Downloads
199
Likes
33
Rating
0
P
Printablespoulanker

Hidden wall mount for Google Nest Audio

I printed this in PLA since PETG will probably flex to much. 0.3 mm layer height, 20% infill and 5 perimeters for extra strength. Changes: 20250805: I was inspired by Ninefifty's remix of my model and have now added top- and bottom end…

Downloads
199
Likes
24
Rating
5
P
PrintablesMihai I.

Fosi Audio ZK-TB21 Amp Frame

This model uses all four stock standoffs as attachment points. This makes a pretty snug fit. It also offers some thin vents on both sides for air circulation. You don't need special parts nor special tools to install this.

Downloads
183
Likes
11
Rating
0
P
PrintablesBrandon

AudioMoth Vault

UPDATE: V3 IS OUT!!! It improves on this v1 in nearly every way. Check it out: https://www.prusaprinters.org/prints/56767-audiomoth-vault-v3 The original version below is deprecated, but entirely fine for less demanding environments,…

Downloads
178
Likes
6
Rating
0
P
Printablesbviz2

Under desk audio cable holder

Designed for the Dukabel Headphone Extension Cable on Amazon: https://www.amazon.com/gp/product/B07FB6FB19 I used velcro to attach it to the desk. Printed with supports. Print instructions Printed on an MK3S using the 0.15mm Quality…

Downloads
177
Likes
41
Rating
0
P
PrintablesToby

Fosi Audio BT20A Pro Underdesk mount

Couldn't find one so designed my own. bom: 2x printed parts 4x woodscrew

Downloads
177
Likes
10
Rating
5
P
PrintablesTomson Design

Dayton Audio DMA70-8 2-1/2" satellite speaker

I made enclosure/satellite speaker for Dayton Audio DMA70-8 2-1/2" Dual Magnet Aluminum Cone Full-Range Driver and Dayton Audio DMA70-PR 2-1/2" DMA series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is…

Downloads
174
Likes
28
Rating
0
P
Printablesthisdrunkdane

Audioengine A2+ desk stand

Printed with default profiles for a Prusa Mini+ and Prusament PLA, 0.2mm layer height with 15% gyroid infill

Downloads
172
Likes
17
Rating
4.5
P
PrintablesAXUL

Enclosure for Wuzhi Audio ZK-3002 TPA3255 Digital Amplifier Board Stereo 300W x2 Bridged Mono 600W

No screws required, 2 clamps are used instead to hold the 2 enclosure parts together and also serve as feet. Steps to assemble: 1. Place the board into the bottom of the enclosure. 2. Place the top of the enclosure over the bottom one. 3.…

Downloads
171
Likes
14
Rating
0