Search results: auge

Sort order

3,894 models

P
PrintablesSaveYourBacon

Prusa Core One (+ Gen 1 / + Gen 2 / L) Belt Tension Gauge (New V2 Design)

Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…

Downloads
3,391
Likes
771
Rating
4.93
P
Printableskh4rj0

Radius Gauge Set

You can use these to gauge radii from 2-25mm, just hold it up to the object and see which indentation fits best :) NOTE: this measures radius, not diameter! Printing: This was designed to be printed with Prusaslicers “0.30mm Draft”…

Downloads
3,315
Likes
370
Rating
4.93
P
PrintablesAMTprojects

Fillet diameter radius gauge | Workshop coaster

What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…

Downloads
2,907
Likes
1,117
Rating
4.85
P
Printableselatobi

Depth gauge set for 5-14 mm drills.

This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.

Downloads
2,750
Likes
1,264
Rating
4.67

Spaghetti Pasta Gauge

Serving size is denoted by number of notches.

Downloads
2,399
Likes
372
Rating
4.55
P
Printables3D KIMBA

Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads

Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…

Downloads
2,131
Likes
471
Rating
4.88
P
PrintablesAMPERAGE

12 Gauge Shotgun Shotshell Holder (Matchsaver) - M-Lok Compatible

Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…

Downloads
2,007
Likes
258
Rating
5
P
PrintablesUbermeisters

Contour Gauge -Print-In-Place

Most contour gauges require a lot of separate prints to be assembled after printing, this alleviates that annoyance. This is designed to provide a way to measure, not sketch. Lid screws in to adjust fin tension or to lock fins in place.…

Downloads
1,742
Likes
207
Rating
3.57
P
PrintablesART TOO

NUT GAUGE - NUT GAUGE KEYCHAIN - (Tested)

Perfect nut gauge for your toolbox You can print this in one or two colors.

Downloads
1,471
Likes
657
Rating
4.75
P
PrintablesDaniel Frank

12 Gauge Shotgun Shell Container

Container for small stuff (BB balls, toothpicks, etc.) in style of 12 gauge shotgun shell inspired with look of original Doom game. Preferably print the top part in red and bottom in gold (brass). Thread might go little tough at first but…

Downloads
1,285
Likes
142
Rating
5
P
Printablesdjedje_zr7

Contour Gauge Duplicator -MG TOOL-

Contour Gauge Duplicator with lock Printing of the cover part stops 2times for color change (black, red, black in my case) Need : M6x30mm hexagon screw and a M6 nut (M6x30mm min) Four 3x15mm woods screws Need : 1 red slider 6 blacks…

Downloads
1,183
Likes
278
Rating
4.8
P

Clearance and Tolerance 3D Printer Gauge : 0.15-0.50mm

Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…

Downloads
1,011
Likes
50
Rating
4.5
P
PrintablesMilos

Radius finder 1-22mm (radius gauge)

Update: Version 2 uploaded. Grab files with _v2. Latches in joint were made little stronger. Arc for radius 6 (inner on ruler) made larger angle, to made it more accessible. ----- Printing tips: Print with 2 colors for better reading.…

Downloads
793
Likes
107
Rating
4.79
P
PrintablesHopeinformer

TIG Cup Size Tungsten Stick-out Gauge (US)

A quick and simple way to set your tungsten stick out length. I wanted a quick way to set my tungsten stick out length each time so I quickly modeled this in Blender and sliced it. Should go without say but to point out the obvious…

Downloads
783
Likes
82
Rating
5
P
PrintablesEcoDad

Contour Gauge

In addition to the 3d printed parts, you will also need: 2 - knurled knobs m6 x 10mm 2 - m6 nuts Print 1 base 1 top (10mm or 19mm thread length of knob) 53 x pin The pins should be printed flat for maximum strength. I printed 60 and had a…

Downloads
682
Likes
409
Rating
4.33
P
Printablesvictor_frncy

radius gauge

find the radius of curves by successive tests on the gauge as in the image below : The numbers on the gauge are the radius and range from 2 to 15mm. I recommand to print it in 0,15mm layer height and enable ironing for a better result You…

Downloads
668
Likes
63
Rating
4.94
P
PrintablesAA

Cookie Cutter (Linzer Augen) - Keks Ausstecher (Linzer Augen)

Cookie Cutter (Linzer Augen) - 2 versions The files can be scaled as desired. The original file has a cookie diameter of 65mm. Use version 1 (upscale) for larger cookies and version 2 (downscale) for smaller cookies, otherwise the cookie…

Downloads
604
Likes
40
Rating
5
P
PrintablesTantalus

Fencing with gate for 1:76 OO scale or HO gauge

Printing Instructions: Perimeters x1 (I found that just one perimeter was required.) Top & bottom layers x3 Infill 0% If you have any questions, please feel free to contact me & please share your makes Thx.

Downloads
440
Likes
61
Rating
5
P
PrintablesSebastian K

H0 Gauge (High Speed) Train Tunnel

I print these on my MK3S with 0.3mm Layer Height and 0% infill. Tunnels like this can be found on German High Speed Railway like the Schnellfahrstrecke Hannover Würzburg.…

Downloads
364
Likes
26
Rating
5
P
PrintablesFusedForms

Tolerance Gauge/Tester | 0.05mm - 0.50mm

RECCOMENDED PRINT INSTRUCTIONS: 0.2mm layer height, 3 walls, 15% infill Model will appear in slicer rotated 180 degrees x/y direction. Please rotate so numbers are facing upwards before printing to ensure accurate results This is a quick…

Downloads
353
Likes
29
Rating
4.5
P
Printablesm750

Seam gauge metric

There where a lot of imperial gauges but my wife wanted a metric one, so I made one. It is a fast 15min print, works with color change or without. I have included 2 g-codes one with and one without color change in PLA and 0.4mm nozzle,…

Downloads
300
Likes
116
Rating
5
P
PrintablesMart80

Radienschablone / Radienlehre / inside / Radius gauge

A simple inside radius gauge for 1-15mm. Eine einfache Innenradiuslehre für 1–15 mm.

Downloads
292
Likes
19
Rating
5
P
PrintablesStefan

Tire tread depth gauge/Reifenprofil

Tire profile measuring device, with this you can easily check whether the tire profile is still suitable. 1mm 1,6mm (minimum tread depth/Mindestprofiltiefe! - EU) 2 mm 3 mm 4 mm (winter tire - minimum tread depth/Mindestprofiltiefe…

Downloads
288
Likes
19
Rating
5
P
PrintablesPIZZA_CAT

AUGER COUPLING FOR MEAT GRINDER

Auger safety clutch for meat grinders Zelmer, Bosch, Philips ect. I received another order for the repair of a meat grinder. As usual, the plastic part failed. The sore spots of all meat grinders are gears or clutches. Because they are…

Downloads
245
Likes
17
Rating
5
P
PrintablesThibault Huguet

Brake pad wear measurement gauge

This set of gauge can be used to measure the thickness of the brake pad without removing them from the car. Gauge range is 1 to 8mm. Gauges can be hold together using a M4 screw + nut. Accuracy will depends on the printer but checking…

Downloads
238
Likes
41
Rating
5
P
PrintablesDr. Terra

Netatmo Rain Gauge Holder

A simple holder to mount my Netatmo Rain Gauge to a flat wooden pole. Printed with PETG for UV resistance and 100% infill for stability (might be not necessary). Paint on Support below the plate (see gcode file)

Downloads
193
Likes
13
Rating
0
P
Printablesfranpoli

Milka's radius gauge generator

This radius gauge generator offers the following features: Adjustable step Adjustable range from 1 to 25 mm Constant square angle for each radius gauge Adjustable layer height Adjustable printer tolerance Supports different types of…

Downloads
188
Likes
24
Rating
5
P
PrintablesJayS

Incremental Marking Gauge

Incremental Marking Gauge for 1-200mm with holes for 2,8mm graphite leads like Pica Dry Marker

Downloads
166
Likes
24
Rating
0
P
PrintablesTimW

End Of Track (EOT) Stop HO gauge

This end of track stop fits between the ties of HO track. Fits code 80 and code 100 track. Designed for layouts using Knuckle Couplers. Print with supports from print bed only.

Downloads
138
Likes
12
Rating
0
P
PrintablesMaju

Radienlehre / Radius gauges

I made some Radius gauges. There are two versions of the pre-sliced gcode files, one with and one without colorchange for the numbers The radii are as following: 1-20mm: 0.5mm steps; 20-40mm: 1mm steps; 45mm; 50mm; have fun with them

Downloads
121
Likes
13
Rating
5
P
PrintablesJohnMartin

Folding Hole Gauge - Metric and Imperial

Folding hole gauge with metric and imperial measurements. Metric goes from 20mm to 5mm. Imperial goes from 1-inch to ¼-inch. Use supports (it hardly uses any). I tried to avoid needing them, but I didn't like any of my solutions for…

Downloads
113
Likes
20
Rating
4.5
P
PrintablesEmkatech (Mike)

Radius Gauge / Radienlehre R 0.5 – R 30

Radius Gauge R 0.5 – R 30 This practical accessory is designed specifically for 3D printing and is ideal for checking or marking internal and external radii. Just print the sizes you need – from R 0.5 to R 30 – and use them flexibly in…

Downloads
107
Likes
41
Rating
0
P
PrintablesHobbydrucker

Radien Lehre / Radius gauge - multimaterial

Die Lehre eignet sich gut, um größere Radien von Modellen oder Skizzen abzunehmen, wenn kein vollständiger für eine Messung mit einem anderen Gerät vorhanden ist. Das Modell ist aus PETG und mit MMU3 gedruckt. Es ist damit ein wenig…

Downloads
107
Likes
9
Rating
2
P
PrintablesYetti

Dübellehre / Dowel gauge

Hier finden Sie Werkzeug zum einfacheren Bohren von Löchern für Holzpflöcke. Mit diesem Werkzeug können Sie Löcher mit einem Durchmesser von 6, 8 und 10 mm bohren. Für den Zusammenbau benötigen Sie: 4x M3 Einschmelzmuttern 2x M3x16…

Downloads
105
Likes
16
Rating
5
P
PrintablesAkinayr

Fillet / Radius Gauge for Calipers - Rasied Text

Remix of Lorro's model. Just updated with raised text and also smaller magnets.

Downloads
99
Likes
14
Rating
4.33
P
PrintablesNozzle

Mafell Erika 85 Absaugadapter auf 35mm Standard Staubsauger

Absaugadapter auf 35mm Standard Staubsauger

Downloads
84
Likes
4
Rating
0
P
PrintablesAdudino

Tire Profile Gauge (just 0.5 g!) - 1 mm = 1 dot

Extreme cheap and fast print, fits anywhere and makes a nice giveaway :) Check your tires for minimum profile or optimum (check your country standards on what you need). Typically you want 3 mm for summer and 4 mm for winter tires for…

Downloads
77
Likes
18
Rating
5
P
PrintablesBombastus Hands

Sheet Metal Hand Brake Back Gauge Add-On

Back Gauge Add-On The back gauge helps bending same lengths several times without the need of marking your sheets before. Just set the leg length, tighten the bolts and bend as usual. Just one sheet after another without interferring. You…

Downloads
74
Likes
16
Rating
0
P
PrintablesMartin

Radius Gauge Case Concave & Convex 02-19mmmm

This is a casa for the Radius gauge 02-19mm Concave & Convex PLA or PETG Merry Christmas and New Year 2022

Downloads
69
Likes
14
Rating
5
P
PrintablesWayne JxRx

Prusa Plugs v.1 (Ear Gauges)

These are Prusa themed ear plugs that I designed in Tinkercad. Scale to fit, but sized @ a 1". My very first design on my first printer!! A Prusa Core 1+

Downloads
49
Likes
7
Rating
5
P
PrintablesMRomme

HVAC Refrigerant Gauges Christmas Ornament

This has been a labor of love building this. I used an actual set of gauges and made the model a 1-1 scale version. The .stl file is 1-to-1 scale but the G-code file is scaled down to 65% as i found that was the ideal sizing for printing…

Downloads
47
Likes
19
Rating
0
P
Printablesverbjose

12 gauge Ammo Tray for Greenmade Store-All Storage Crate Sold by Costco

After buying these Greenmade ammo boxes at Costco, I noticed that they did not come with any trays. After a long web search, I was unable to find any shotgun shell trays that would fit Greenmade ammo boxes because the internal dimensions…

Downloads
40
Likes
4
Rating
0
P
Printablesyossarianmtu

Caliper depth gauge foot - Wide

This foot is wider than most at ~200mm. I printed this with a brim. Any loss of bed adhesion will impact the accuracy of the tool. Press an M3 threaded insert into the hole in side. Snap the base of your caliper into the foot. Finger…

Downloads
40
Likes
8
Rating
0
P
PrintablesGranit

Adapter Vorwerkstaubsauger auf Vakuumbeutel (Space Saver)

Das ist ein Adapter für einen Vorwerkstaubsauger (Kobold) auf einen Vakuumbeutel (Space Saver), den ich designt habe. Der Innendurchmesser von dem Staubsaugeraufsatz beträgt ca. 38mm. Support: nicht notwendig Infill: 15%

Downloads
38
Likes
1
Rating
0
P
PrintablesFlavien

Simple Contour Gauge

Simple Contour Gauge to use with a pencil and a 13mm ruler

Downloads
35
Likes
5
Rating
0
P
PrintablesBooks

Ring Gauges (16mm tall) 20mm - 29.82mm

Annular gauges for measuring the diameter of cylindrical objects. Gauges are 16mm tall and 4mm thick. Sizes range from 20mm to 29.82mm inner radius. These are part of a set. For similar ring gauges in different sizes, use this search .

Downloads
33
Likes
2
Rating
0
P
PrintablesPocahontius

Stave drum angle gauge

Printable stave drum angle gauge. As it is a parametrizable model you can change the angle to your desired drum size. This angle gauge was especially designed for stave drums, but it can of course be used for completely different things.…

Downloads
33
Likes
3
Rating
0
P
PrintablesOssilampe

Radnabe Ryobi Staubsauger R18SV7-0

Meine Nachbar kam zu mir mit einem abgebrochenen Rad seines Ryobi Staubsauger R18SV7-0

Downloads
29
Likes
3
Rating
0
P
Printablestoxicmind

Marking Gauge For Ruler

Instructions:- Ruler Width = 25.3 MM Ruler Thickness = 1.3 MM Nail Diameter = 3.5 MM

Downloads
29
Likes
3
Rating
0
P
PrintablesJayS

Radius gauge 1-20mm with JayS logo

First of all, thanks mibla for the awesome model I added my logo to it

Downloads
25
Likes
3
Rating
0
P
PrintablesLebakas

Zentralstaubsauger-Gitter Grobschmutzsperre | Central-Vacuum part-catch

100% Infill PETG or PLA Layer: 0.15-0.20mm Wenn der Stab brechen sollte, kann er mit einer dünnen Schraube oder Gewindestange ersetzt werden oder weggelassen werden. - If stem breaks it can be replaced with small diameter screw or…

Downloads
20
Likes
1
Rating
0
P
PrintablesStefan R

Radienlehre / Gauge for Radii from 8 to 22 mm

Zum Zusammenbau alle Lehren mit der größten zuerst aufeinanderlegen und dann den Pin mit dem Schlitz eindrücken. Stack them all together like on the photo, biggest first, then put in the pin with the slit.

Downloads
20
Likes
1
Rating
0
P
PrintablesBooks

Ring Gauges (32mm tall) 10mm-19.82mm

Annular gauges for measuring the diameter of cylindrical objects. Gauges are 32mm tall and 4mm thick. 10mm to 19.96mm. These are part of a set. For similar ring gauges in different sizes, use this search .

Downloads
19
Likes
1
Rating
0
P
PrintablesFreddy

3-2-1 Movement Gauge

This movement gauge has a 3inch, 2inch and 1inch side, a large hole for easy manipulation around the game board. Print a few and hand them out at your next event

Downloads
17
Likes
3
Rating
0
P
PrintablesJoergH

Metabo Rollwagen Boden Schale für AS18 Akkusauger

Extra Boden der unter den Rollwagen geschraubt wird. Metabo hat hier bereits Bohrungen für Schrauben vorgesehen. Sollte möglichst massiv gedruckt werden, falls der Staubsauger mal über eine Stufe gezogen wird… Support Filament: PETG

Downloads
17
Likes
2
Rating
0
P
PrintablesWerner

Schnapper Industriesauger

Prusament PETG; Druckdüse 0,4mm; Schichtdicke 0,15mm “Quality” Druck auf kleinerer schräger Fläche, so dass alle Winkel größer oder gleich 45° sind → keine Stützstruktur nötig.

Downloads
16
Likes
0
Rating
0
P
PrintablesFalling Entropy

Nominal Focal Length Gauge Block for Laser Cutters

Used for both practical and educational purposes, this gauge block can be used to get a close starting point to further adjust focal length for both surface and depth cuts for three different lenses. The three lenses are: 1.5 inch or 38.1…

Downloads
16
Likes
5
Rating
0
P
PrintablesSoukupXYZ

"Star shaped" Fillet Gauge (1-8mm version)

Cool looking measuring tool that fits in your wallet. Might come handy when creating accessories for some rounded things.

Downloads
14
Likes
3
Rating
0
P
PrintablesSky99

Sauge officinale : panneau avec le nom scientifique

Un panneau avec lettrage en relief, à mettre au pied d'un plant de sauge officinale (sage), avec le nom scientifique en dessous. Print instructions EN: Print the layers from 0 to 1.5mm in one color, and the layers after that in another…

Downloads
14
Likes
1
Rating
0
P
Printablesices

Frostpendeln Sticker Katzenauge

Eine weitere Möglichkeit den wunderbaren Frostpendeln Sticker am Rad zu befestigen. Zur Montage werden 2 Stück M3*10 Schrauben und 2 Stück M3 Muttern benötigt. (Für besseren Halt 2 Stück M3*12 , 4 Stück M3 Unterlegscheiben und 2 Stück M3…

Downloads
14
Likes
0
Rating
0
P
Printableswerztimo

Replacement cover for BROEN eye shower (Augendusche)

Photos from: https://www.broen-lab.com/de

Downloads
12
Likes
0
Rating
0
P
PrintablesTräd-E

Feeler Gauge 9.7-10.3mm

Tool for measuring the distance between Z rod and Z screw I added an ironing modifier but I couldn't make it work well, the direction of the ironing would need to be the same for each layer. You'll want to print it with pla and on the…

Downloads
12
Likes
0
Rating
0
P
Printablesross549

Prusa Mk3S temperaturę gauge with filament change buddies!

I was thinking about my life and thought to myself, what is the most bastardized model I could come up with? The answer was easier than you might think! I found these two models here at Printables:…

Downloads
10
Likes
1
Rating
0
P
PrintablesM3D

Scalable Root Irrigator with Screw & Float Gauge

Main Body There are 3 different versions available of the root irrigator. One with a short neck, one with a medium neck and one with a long neck. All of those are freely scalable and will work with the accessories (float gauge & cover).…

Downloads
8
Likes
7
Rating
0
P
Printablesfreischi

Standbohrmaschinen-DeWALT-Absauger

Dieser Staubsaugeraufsatz für den Staubsauger DeWalt DCV501 kann auf deinen Tisch gelegt werden und daneben z.B. mit der Ständerbohrmaschine gebohrt werden. Der Staub wird direkt weggesaugt. Ich habe das Teil mit PET-G gedruckt. PLA würde…

Downloads
7
Likes
2
Rating
0
18+

The source marked this model as adult content.

Downloads
3
Likes
0
Rating
0
P
PrintablesMichal Blazek

Radius gauge 1-20 mm

Compact gauge for outer and inner radius 1-20 mm. Printed with Prusament PETG, no supports. Layer hight 0,15 mm (first layer 0,20 mm). You need two M5x30 screws and two M5 lock nuts for assembly. Inspired by…

Downloads
27,335
Likes
9,592
Rating
4.91

Self Centering Gauge

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

Downloads
24,131
Likes
7,803
Rating
4.92
P
PrintablesART TOO

SPOOL GAUGE - FILAMENT TESTER - (Tested)

A volumetric calculation was used to determine the precise placement of the lines, as the spool diameter decreases more rapidly when it’s nearly empty than when it’s full. Three versions have been uploaded: Version Description Percentage…

Downloads
8,191
Likes
2,368
Rating
4.88
P
Printableslostintech

Clearance Gauge

What, I finally linked to the video? Haha, I said I would. Eventually :)

Downloads
7,694
Likes
837
Rating
4.82
P
PrintablesGiando

Solid Woodworking Marking Gauge

This is a woodworking marking gauge, the only thing you will need to add is a 40mm socket head bolt and an hex nut. For the long body I suggest to use Brim to ensure the adherence to the printer bed. The tool in the image is printed with…

Downloads
7,123
Likes
3,158
Rating
4.77
P
PrintablesBryan

All LEGO like train track rail in L-Gauge

This is all the 3d printed LEGO® tracks following the L-Gauge train track standard. See YouTube video: Also included is my Solidworks source file so you can modify the length, radius, degree, inner blocks, etc. The models are…

Downloads
5,797
Likes
456
Rating
4.5
P
PrintablesVC Design

Tire Tread Depth Gauge

Keep your tires safe and legal with this compact Tire Tread Depth Gauge ! This tool helps you instantly measure tread depth to see if your tires still meet the legal minimums: Winter tires : 4 mm reference Summer tires : 1.6 mm reference…

Downloads
5,744
Likes
1,697
Rating
4.91

Belt Tension Gauge

Filament type and print density will create variations to this tension gauge. PETG is recommended. It is only a indicator of relative tension. The Fusion 360 files will give you the ability to adjust for belt widths or other belt lengths…

Downloads
5,034
Likes
463
Rating
4.87
P
PrintablesCarl D

Radius Gauge R1-30mm - AMS Ready

Comes with two boxes and a set of convex and concave gauges, suitable for radiuses 1mm - 30mm inclusive. By default, the boxes and tiles are the same colour, with the tiles and boxes having different accent colours for concave and convex.…

Downloads
5,011
Likes
1,337
Rating
4.63
P
PrintablesEttil Vrye

Parametric woodworking marking-gauge /w fast-lock

This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…

Downloads
4,884
Likes
1,798
Rating
4.88
P

Gridfinity Dual-Height Tweezers & Feeler Gauge Holder

This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…

Downloads
4,863
Likes
458
Rating
4.95
P
PrintablesDrTob

Caliper Radius Gauge – Corner Radius up to 130 mm (prints without support)

This radius gauge allows you to determine the corner radius of parts using a standard caliper . Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers. To calculate the corner radius, multiply the caliper…

Downloads
4,686
Likes
1,676
Rating
4.46
P
PrintablesTorsti

Radius gauge 0-50mm

If the scale shows incorrectly, print alternative slider

Downloads
4,418
Likes
1,692
Rating
4.42
P
PrintablesTjalf

Lockable Contour Gauge

A lockable contour gauge to copy/measure arbitrary shapes by pushing the blades against the desired shape and locking the gauge. The shape of the gauge can then e.g. be photographed and uploaded into a 3D CAD program. I used this for…

Downloads
4,222
Likes
1,256
Rating
4.86
P
Printablesunit

Radius gauges 1-30mm

Little bit remixed model. See remix diferencies section. Thanks very much to Jaha for his great piece of design in original model and to kisscoool18 for his colored remix. Good job! These remixes can be now complemented by Radius Gauges…

Downloads
3,992
Likes
1,592
Rating
4.9
P
PrintablesChip

Belt Tension Gauge (source file included)

Open source tension meter for GT2 belts based on Prusa gcode This design is made based on their gcode file with eyeball measuring. Use at your own risk. STL, STEP , FreeCAD format are availabe for download. The lite version with small…

Downloads
3,585
Likes
288
Rating
4.94
P
PrintablesMakers Manual

Angle Finder Gauge

This compact Angle Finder gauge will measure the True Angle of an project, as well as provide the Mitre Saw Cut Angle. The tool will measure internal or external details, so that coving, cornicing, skirting etc can be cut to accurately…

Downloads
3,344
Likes
1,186
Rating
4.91
P
PrintablesKabliga

3d Design Gauges 1-14mm

Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! This simple device lets you visually see and feel the different sizes and features you would use during 3d building,…

Downloads
3,189
Likes
432
Rating
4.95
P
Printablesdisser

Radius Gauge

Outer radius gauge for 2-15 mm. Print instructions Category: Hand Tools

Downloads
3,126
Likes
322
Rating
4.88
P
PrintablesVC Design

Radius Gauge Tool

Each insert features two gauges, allowing you to quickly check the radius of a part without needing separate tools. The inserts are clearly marked with a code such as 23/8 : First number: internal radius gauge Second number: external…

Downloads
3,028
Likes
1,443
Rating
4.9
P
Printablesdsharlet

Bolt gauge with thread pitch identifier (metric and SAE)

Find bolt thread pitches without threading them into internal thread checkers! Standard thread checkers where you thread the bolt into some internal threads can be problematic. When it's a close fit, it's hard to tell if a bolt is the…

Downloads
2,797
Likes
199
Rating
5
P
PrintablesVC Design

Radius Gauge - Convex Concave

Radius Tester: 1 - 30 mm The perfect tool for a designer

Downloads
2,556
Likes
1,017
Rating
4.69
P
PrintablesAntipode

String Action Gauge / Ruler for Guitar or Ukulele

I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…

Downloads
2,511
Likes
287
Rating
5
P
PrintablesOverMaintained

Filet/ Radius Gauge Set

Print one of each file. -Small Gauge(1mm-15mm) -Medium Gauge (16mm-23mm) -Large Gauge (24mm-30mm) -X Large Gauge (31mm-36mm) -Tray The storage tray is built slightly taller than necessary to accommodate a non-slip mat or toolbox drawer…

Downloads
2,471
Likes
233
Rating
4.98

Guitar Under String Radius Gauges

New Dual Colour version! I recently redesigned the text label to make the most of owning a multi colour printer. This prints well on a 0.4mm nozzle, just make sure you have good 1st layer adhesion. Set of 5 common radius, and some less…

Downloads
2,429
Likes
200
Rating
4.86

FLSUN V400 Belt Tension Gauge

Printing instructions: Quality: .12 Walls: 3 Infill: 40 Pattern: Grid Temp: 210 and 60 Speed: 80 print speed and 40 walls No support Raft - Optional Link to the video: Note: I didn't make this model, just uploading it here, since it's…

Downloads
2,341
Likes
158
Rating
4.92
P
Printablesfurrfu

Radius gauges

Radius gauges with a fairly useful range of radii to measure, both for half round objects as for 90° corners. (The 180° gauge isn't labelled because the model file got corrupted in a crash, so I couldn't make changes to it any more.) I…

Downloads
2,332
Likes
273
Rating
4.88
P
PrintablesRJay

Imperial Screw Gauge

An imperial/SAE screw gauge to help sort or measure unknown screws or bolts. Inspired by many others similar designs, this one has raised text to allow a colour change on the top two layers for added contrast. Use the side cutouts to…

Downloads
2,331
Likes
214
Rating
4.86
P
PrintablesAK3D

Height marking gauge metric-imperial

Description Parallel Line Scribing Tool A practical tool for drawing perfectly level lines parallel to the surface, eliminating the need for a tape measure. Simply insert a pencil into the desired hole and slide the tool along the…

Downloads
2,273
Likes
1,125
Rating
5
P
Printablesjogu44

Radius Gauge R1-30mm [Remix]

Do you have a good benchy bottom? Two generated print profiles, 3plates vs. 5plates, use 5 plates if you have quality issues with utilizing the entire print bed. I recommend having wall-infill to outer/inner for the gauges but inner/outer…

Downloads
2,203
Likes
523
Rating
4.83
P
Printablesspearmountain

12 Gauge Shotshell Pack replicas and snap caps

A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…

Downloads
2,178
Likes
144
Rating
5
P
PrintablesDusanJ

Rain gauge

Print your own rain gauge for measuring rainfall. Add some microcontroller like arduino or esp and you can gather and chart the daily rainfall in home automation system like OpenHAB or HomeAsisstant. Description There are three options…

Downloads
2,142
Likes
236
Rating
4.93
P
Printableskevsparky

Radius Gauge for Digital Calipers

A radius gauge for finding the corner radius of items. Can measure radii from 0 to ~100mm. Also included is a quick-reference label that can be printed on a DymoLabel printer, and stuck on. Rename the label file to “.label”, as…

Downloads
2,107
Likes
358
Rating
4.75
P
PrintablesHawwwran

Tolerance gauge / Fidget toy

Minimal distance tolerance gauge. How low can your printer go? The distance between the rings is getting smaller by 0.1mm towards the center starting with 0.5mm, ending with 0.1mm. Each ring is marked by a number marking the size of the…

Downloads
2,105
Likes
290
Rating
4.79