Triumph Daytona side profile
2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).
- Downloads
- 42
- Likes
- 2
- Rating
- 5
204 models
2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).
Dayton audio's incredibly popular B452 series speakers no longer offer replacement speaker grilles. The OEM grilles were made of a thin 6mm MDF and I recently had one break at the thinnest point. I took the unbroken grille off of the…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
The walls are 13mm and i made the volume at recommended for a vented enclosure excluded the speaker. It's built with tongue and groove for easy and strong assembly. Use low viscosity glue. The TCP115 is a very good woofer for the money. I…
Version 2.0 files available! Key differences: M3 mounting points for a more sleek printed handle at the top of the speaker Barrel jack for power and mounting points for a battery holder at the back JAB4 now mounts to the access panel for…
Description Dummy 13 joints adapted to Hardy Daytona. Printing: Layer height .2 mm, 15% infill and 2 walls per layer. Most parts requires support. Print the fork joint (instructions step 1) with ABS/ASA/PETG. Print the fork (instructions…
Instructions from creator: 0.3mm layers 3 shells 4 top and bottom solid 40% triangle infill I used 0.2mm layers
LEGACY MODEL >This is a model which I don't want to take down simply because it is not mine. For the sake of this accounts legacy, I am updating its Thumbnail, and keeping it up.…
IMPORTANT!!! - If you do end up printing this, be sure to print the baffle (the part the speaker mounts to) with a relatively high infill percent, if not entirely solid. Or you could have at least 6-7 exterior walls. When you go to mount…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Background This is a tray to use instead of the cover on the Harbor Freight Daytona Super Duty 3 Ton service jack. I find myself wanting to put lugs nuts somewhere when pulling off the wheel so this is a good place to store them or other…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
I made a Enclosure/Satellite speaker for Dayton Audio DMA80-8 3" Dual Magnet Aluminum Cone Full-Range Driver with Dayton Audio DMA80-PR 3" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is 8mm…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
I wanted to print this, but didn't have a printer big enough, or a way to cut acrylic. I cut through the internal walls to try to give the glue more to grab. My prints came out pretty rough, did them quick and dirty with a .80 nozzle, and…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Needed an exact model of the speaker for a 3D printed enclosure. Due to the thin .75mm outer lip a precision mounting bracket is required. The speaker comes with a fiber gasket which helps but without a way to precision mount most people…
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
This is a detailed model of the Ferrari Daytona engine, driveshaft and transaxle. It should fit into any 1-124th scale Daytona model, other than the “Miami Vice” fake Daytona because it is based on a Corvette. It also makes a very nice…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
General notes about the model This is an adapter for mounting a Dayton Audio TT-25 “puck” bass shaker to the back of Heusinkveld Ultimate Plus pedals. It should work on any of the pedals, but I only tried the accelerator and brake. The…
Intention to print these 4 parts and then use ½inch nominal (0.472 in) plywood for top and bottom. To use threaded rod (¼-20 or similar, those are 6.5mm holes) to clamp shut I'm finding 400-800g per part, so this is a plastic hog… I'm…
Try this as a smoother, less broken-up version: 20 cm x 20 cm Print Bed Version This is a modified version of the subwoofer enclosure, split into smaller parts so it can be printed on 20 cm x 20 cm print beds. I added connectors to make…
Daytona International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…
I've been working from home for over a year and felt my PC desktop audio system needed an upgrade. These full range speaker are based on the Dayton Audio RS100-4, 4 inch driver. I 3d printed the cabinet shown here in PLA and I've now…
A mount to fastening Dayton bass shakers to Fanatec csl elite v2 pedals. May or may not print with support. Mount with zip tie. I use the mounting bracket shipped with the shakers, but might work without. *Updated version from the one…
Put together a Dayton C Note speaker kit and print the cabinets to avoid clamping, sanding, staining, painting, and other annoying woodworking tasks! The cabinet is designed to fit exactly inside the MK3 print volume, which results in a…
Keep the crew cool with a rooftop Dayton Phoenix Style Air Condition Unit. Added a version for fitting over the existing poorly detailed thing on the AML GP60 model. lol (Picture shows Aristo-Craft SD45.) NOTE: I PUT MUCH TIME AND EFFORT…
I made enclosure/satellite speaker for Dayton Audio DMA70-8 2-1/2" Dual Magnet Aluminum Cone Full-Range Driver and Dayton Audio DMA70-PR 2-1/2" DMA series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is…
Allows for mounting an Aurasound or Dayton Audio bass shaker on extruded aluminum. My shakers have holes for M5 bolts, and I used M5 heat set inserts to hold them in place to the mount. I've included STLs for both M5 and M4 shaker mounts,…
(Update 1/8/23: Added adapter for Wondom JAB 5 and Dayton Audio KABD-4100 4x100W amplifiers.) This is an amplifier enclosure intended for the Dayton DSPB / KAB series of Class D amplifiers also sold under the brand Sure Electronics…
I made satellite speakers for Dayton Audio DMA58-8 2" with Dayton Audio DMA58-PR 2" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. It's built with tongue and groove for easy and strong assembly. Use low…
Story: So I live in Europe and my Daytona hop-up bucking broke I didn't find any vendor that resells their hop-up buckings so I tried 3d printing one from flex. Print it from the softest flex you can get or print I printed mine from shore…
Ferrari Daytona SP3, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Small enclosure for a Dayton PS95 driver. Approximately 2L volume with a port 17x87mm. Tuned to 58Hz, results in fairly flat down to ~150Hz, then a -7 dB step down to 50Hz. Sounds surprisingly great for how small it is, especially if you…
Dayton TT25 Bass Shaker Mount for V3's.
Inspired by RamjetX design https://www.thingiverse.com/thing:3077632 I made a bass shaker using the Mini Bass shaker pucks by Dayton for my Aluminium 8020 SimRig by www.swedishrigdesigns.com. In the stl files it's included also one design…
Back to the Future 3 - Clara Clayton - 1990
A Blinker support for the street triple/Daytona blinkers. My 2011 Triumph street triple had all of the blinkers broken due to the support being to dry over time. Here is a remplacement part for the support. It is plug n play, all you have…
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
MK Kit 3D-Printed Bookshelf Speaker Enclosures The MK Kit 3D-printed enclosure files give builders a clean, printable cabinet option for the Parts Express MK Kit Pair - Components Only package . This design was created specifically for…
Print in anything .2 layer height. 4+ permimeters. Designed for M4 heat inserts.
***PLEASE MAKE SURE YOU UNDERSTAND BASIC ELECTRICAL SAFETY BEFORE ATTEMPTING THIS BUILD, OR CONSULT A PROFESSIONAL*** I made an enclosure to house the amplifier board and power supply. It has 10 outputs on the back for the 7.3 channels on…
Bassreflexgehäuse abgestimmt auf ein Dayton Audio RS100-4 4inch Chassis. Maße 166x178x266mm Das fertige Gehäuse besteht aus zwei Teilen. Beide Teile können an einem Stück gedruckt werden. Supports werden beim Gehäusekörper benötigt.…
Basic mount to add Dayton Audio TT25 to the BJ Sim Racing pedals. This should work with any of the pedals. UPDATE 02/07/24: Redesigned the mount point to back of pedal as the attachment point for the throttle is narrower. This also added…
Dayton BST-2 Bass Shaker 4040 Extrusion Mounts. Files include a centered mount and an off-center mount. Mount with 2x M8 bolts to the extrusion. The hole spacing for the mount is a 96.8mm square or 137mm diagonally apart.
Mount your bst1 transducer to a 25mm round tube. Print in opened orientation, use supports for top part. Trees supports work great and provide good enough radius to give necessary clamp force. Hardware requirments: -5x 3mm thread inserts…
I wanted to build my sister a simple, aesthetically pleasing, and great sounding pair of speakers for her living room. I found this ported enclosure for the Dayton PS95-8 full-range drivers by @ProjectsByBrian, and loved the design.…
I wanted a rubber or tpu jack pad for my Harbor Freight Daytona Superduty DJ3000 floor jack. I could only find one for sale on Amazon, but as I'm trying to learn F360, this seemed like an easy enough thing to make. I've included the STEP…
Vintage logos for Dayton, DeWalt, Reliant and Ridgid. Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have…
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
This is a blanking plate for use on a Triumph Trident 660 motorcycle when removing the rear foot pegs. This is designed as an alternative to the R&G Blanking Plate BLP0047BK, which works on the Triumph Trident 660 and the '15-19' BMW…
I could not find the Rotary Damper on the Market or only for high prices. So I created this part myself. Additional material: What you need is an O-ring with 8 mm and 1,5 mm thickness as well as silicone oil. I used a viscosity of 30000…
Improved design to add countersunk nuts for bolts 4mm & 5mm. Removed the need for a interfacing gasket as it just dampened the vibration effects. added a flange to the top bracket so it tightens to the fiberglass seat and not the plastic…
1964-65 COBRA DAYTONA Winner, 1965 Monza 1000 km, driven by Bondurant/Grant, Finish Line Plus Bondurant (left) and Grant cruised to victory, unchallenged on the banked Monza circuit. Apr. 25, 1965 Ford decided to focus their energy on…
Files description: wtp_postitive - use this as filler for ends or as a template to add to your model (adjust height to 2.84 mm) wtp_negative - use this as a template to subtract from your model. wtp_staright1 - straight piece length 1…
Redesigned from a design found on Printables https://www.printables.com/model/524457-daytona-super-duty-3-ton-jack-tray?fbclid=IwAR3cY-XXIQPqueZ9KLArGQRBsJjeAVgNg6v-U4WDaBrFKODem-B4fBxTNQY I wanted a few things different including…
These are a pair of drivers made to look like vintage Karlson speakers although the front baffle is completely optional. These are a WIP and will be updated in the future I don't recommend you print these in ABS unless you are the god of…
This is a full range speaker for the Dayton Audio RS100-4 chassis from their reference range, popular due to low distortion and linearity. Sound pressure level is in the lower range with 83dBA, but the Re of 4 Ohm makes it easier for the…
Another Great Pepakura File uploaded to the internet fro free. I have thickened the shell and it just needs to be sized and sliced up to suit your printer. "3080" Enjoy Cheers Jace Print instructions Category: 3D Printing
I designed a simple looking speaker enclosure for the lovely nd65-4 speakers along with some 18650 cells and a cheap ebay audio amp, the size and port is tuned for these speakers to sound best IMO. You may need to do some modifications to…
Fasten BST-2 to these mounts by directly threading (4) M4x10mm FHCS into the print. Attach these mounts to aluminum extrusions using M8x12mm BHCS into appropriate t-nuts.
A square to round attachment for dayton blower version 1tdr3, my local hardware store doesnt sell any of this attachment, so I decided to do it myself. Ps: the model uploaded curve sides, I'm just using this model for referrence but it's…
As of writing this, there are two slightly different versions of Daytona 6 ton jack stands sold by Harbor Freight. One has a center column width of about 28mm and the other about 32mm. This is for the 32mm version. You might be able to…
I used two command strips, top and bottom to attach the mount to the wall. This model doesn't have screw holes as I didn't need them, but I've provided the STEP file so you can modify it yourself for whatever screw you'd like to use.…
Materials: 2x Dayton Audio TT25 12x M3x4x8 heat insert 12x M3x10mm bolt 6x zip ties for strain relief Assembly is quite simple: Install heat inserts into mounts Unbolt pedal spacers Slide spacers into mounts Attach TT25 to mounts Zip tie…
Who's Coming to Dinner - Mr. Matt Drayton (Spencer Tracy) - 1967 3D printable model.
Bracket to mount a double TT25 Dayton Audio bass shaker beneath your DX Racer gaming chair. You may need to use the 5mm spacer to enlarge the space between the chair and the bracket. I unmounted the armrests as the screws weren't long…
I wanted to clean up some deskspace so i made a amplifier rack to mount under the desk and also to mount the PSU. Both are mounted with double sided tape like 3M or GoPro mount with little padding between the tape. I made the rack in…
This is a model of the original adapter included in the Dayton Audio TT-25 puck. There's both a open back and a closed back variant. Printed on Bambu Lab X1C with PETG with no special settings.
Project: https://simracing-pc.de/en/2023/08/08/diy-project-tactile-feedback-abs-effect-for-simracing-pedals/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper…
Dayton Audio DMA 58-4 2" Tuned for 100hz Print properties: 40% Gyroid infill 4 Perimeter walls 5 Top layers 5 Bottom layers
Dodge Charger Daytona 1969 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
WWI-inspired American Dayton-Wright DH-4. Designed to be a display. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to…
Terminal plat to accommodate bigger Ø7mm binding post
Guess Who's Coming to Dinner - Mrs. Christina Drayton (Katharine Hepburn) - 1967 3D printable model.
Transducer mount fits both pedals, but needs spacers on each side for the brake.
Needed to reclaim some desktop space so wanted to rehouse some PS95 drivers from some bookshelf size DIY wooden enclosures to something smaller and 3d printed. Saw something similar to my design somewhere but couldn't find it so quickly…
Daytona TT-25 mount for Simonn Brake Pedal
Winner, 1965 Monza 1000 km, driven by Bondurant/Grant Bondurant (left) and Grant cruised to victory, unchallenged on the banked Monza circuit. Apr. 25, 1965 Ford decided to focus their energy on racing the new GT40 and Shelby American…
This is a small passive bookshelf speaker I designed for my computer desk. The design squeezes out every bit of low-end performance out of a 2.5" aluminum cone driver. Internal bracing and curved geometry help reduce internal reflections.…
Material: TPU 90-95A Nozzle: 0.4mm Layer Height: 0.16mm(will give best results for Fillet Radius on bottom) Line Width: 0.5mm for all Print in all walls for best result, can be printed in 10+ walls and around 80%infill as well. have had…
I had a project for a customer, that required a speaker bezel so I designed one in F360 and printed it out. attached is the .stl and .f3d files. Really nice sound from this little speaker, I would say that I'm surprised but I knew Dayton…
Ford Maverick Sub Adapter Plate for Dayton Audio DCS165-4. Mounting hole is shifted for a bit better fit from original model. It has holes for 5mm brass inserts. This requires cutting of the short leg of the support on the left side of…
A case to house Dayton Audio KPX in-Circuit Programmer for easier storage and more convenient use. You will require 4 M2 heat-set inserts. The heat-set insert fit is on the looser side, so I just pushed mine in, which should be ok for…
Mount to attach the Dayton BST-1 bass shaker to any SIM rig with a bar size of 42.75mm diameter. It was made specifically for the RSeat S1 that I have and works great to support and attach the bass shaker to the rig. Uses M4 and M3 screws…
I wanted to install two Dayton Audio BST-2 bass shakers on my Nitro Concepts E-Racer with the R300 seat. I didn’t want to drill into the seat, and I also didn’t trust a solution using 3M adhesive tape. So I spent some time thinking about…
This is a shorter version of the other shelf i made. I have not printed this but is it basically the same shelf i made just one level shorter. Hope you like it.
Ferrari Daytona SP3 Serie Icona Red Magma - Open Roof
2D-Silhouette einer Triumph Daytona 675R: Einfach gehaltene Konturansicht eines sportlichen Motorrads mit typischen Linien und Proportionen. Geeignet für den 3D-Druck und vielseitige Anwendungen.
Designed this to mount a Dayton TT25 to the Moza SR-P brake pedal. In theory, this should work for accelerator and clutch pedal as well. Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo Rafts: No Supports: Yes Resolution: .2…
Speaker adapter to fit Dayton Audio RS75-4 directly to BMW E31 840 / 850 to front doors and rear deck speaker box. Includes STL, 3MF & F3D. Inspired by this thread on bimmerpost:…
Devided to two parts ( M ale and F emale) for small printers like E3 S1. 4 wall lines, 20% infill, PLA, no support. Not perfectly precise, but simple and works.
This is used as a pad for a Daytona jack. Measure the top of your jack as it doesn't work with my other jacks. Just wanted something better than a 2"x4" and this fits nice and snug. I used PETG at first but that dented poorly from the…