P
PrintablesGabriel
Simple tray for tiny sugar, backing powder and etc packets
Print as you wish, it will be hard to have it wrong
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
- Downloads
- 43
- Likes
- 10
- Rating
- 0
Search results: backing
150 models
P
PrintablesAverageYo
Picture Frame Turn Button (Backing Clip)
Picture frame turn button to hold the backing on to a picture frame. To be used with a #6 screw.
- Downloads
- 505
- Likes
- 89
- Rating
- 5
P
PrintablesIgor Štangelj
Mighty Hoop 5.5 Backing Holder
Helps you hold backing on hooping. Much easier to align. Remove before embroidery.
- Downloads
- 390
- Likes
- 14
- Rating
- 5
P
PrintablesCraz101
Hylian Shield Backing (No Edges)
This is a file for @mh_498145's Hylian Shield model. Several users asked for a backing to be posted and although one was given this had the edges which is a different colour from the backing. This remix allows the edges and backing to be…
- Downloads
- 339
- Likes
- 22
- Rating
- 0
P
PrintablesAndrew_Sink
Star Trek: Picard Combadge / Magnetic Backing
Quick model of the combadge from the CBS All-Access show Star Trek: Picard. This model uses 8x3mm magnets to allow you to pin this badge to clothing. Just print out the model and pop the magnets in! Check out my Amazon Page to see what…
- Downloads
- 313
- Likes
- 47
- Rating
- 0
P
Printableswiste95
Organizer for Baking Sachets – Slim & Diagonal - Backing Powder, Vanilla Sugar & More
Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…
- Downloads
- 307
- Likes
- 118
- Rating
- 5
P
PrintablesForgepoint Studios
Puzzle Shelf w/o Backing
A slight change to the original model designed by Jose V. I removed the back side so that you are able to see the wall
- Downloads
- 279
- Likes
- 162
- Rating
- 0
P
PrintablesKari (rhymes with atari)
Earring Backing Card / Holder
Simple earring storage card design. Finally got fed up finding earring pairs, so #3DPrinting 2 the rescue! Prototyped in minutes a design in #OpenSCAD. Sliced in @Simplify3D & within 2 hours of printing in the stunning @EmvioEng Chroma…
- Downloads
- 272
- Likes
- 73
- Rating
- 5
P
PrintablesKevin
GME MB206/MB207 Contoured Backing for Toyota LandCruiser Prado 150
GME MB206/MB207 backing plate contoured to the dash trim in the Toyota LandCruiser Prado 150 for easy mounting. Both left and right side trim variant .stl files are provided, use the correct one for the side you wish to attach the mount…
- Downloads
- 236
- Likes
- 9
- Rating
- 0
P
PrintablesStillwave
Pin Backing
Replacement backing for a pin or badge Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 1mm Layer Height Infill: 30% Category: Jewelry
- Downloads
- 235
- Likes
- 19
- Rating
- 5
P
PrintablesSimonp1080
35mm paper backing tool
Introduction This tool is used to apply paper backing from a 120 format empty roll onto a 35mm roll. The design allows you to pre-align the film in daylight and load in a darkroom/dark-bag. Now you can use the frame counter on the paper…
- Downloads
- 233
- Likes
- 47
- Rating
- 4
P
PrintablesDurahl
FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
- Downloads
- 226
- Likes
- 6
- Rating
- 5
P
Printablessebra
35mm film to 120 backing paper tool V1
***!Work in Progress!*** Seems to work fine lol. Feel free to try it and/or improve the design! I haven't shot the film yet, will give an update when I do. Waiting for better weather… UPDATE: so I developed the film and it seems that…
- Downloads
- 213
- Likes
- 44
- Rating
- 5
P
PrintablesKonneker
Wahl Plastic Backing for small cordless trimmer
So, I can be a bit of a klutz some times. I broke the delicate white plastic backing piece that retains the standard detachable trimmer blade to my Wahl rechargeable cordless trimmer. It was like $8-$9 to buy a replacement. I decided to…
- Downloads
- 193
- Likes
- 19
- Rating
- 5
P
PrintablesMechanism
Steam Deck Deckmate Grip - With Backing - Mechanism
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
- Downloads
- 174
- Likes
- 23
- Rating
- 5
P
PrintablesOpenscaddad
50's Geneva Steel Cabinet Pull Backing Plate
Geneva brand steel kitchen cabinets were popular in the 50's. They featured a low profile cabinet handle that required a recess behind the handle. This was made of plastic. Today, these cabinets are popular for retro style kitchens. The…
- Downloads
- 169
- Likes
- 6
- Rating
- 0
P
PrintablesKSB
Bambu Labs Plate holder with backing to mount with 2 sided tape.
Bambu Labs Plate holder with backing to mount with 2 sided tape.
- Downloads
- 168
- Likes
- 14
- Rating
- 4.67
P
PrintablesLinnèa
Modular Pin Display Remix with IKEA Skadis backings
I've added the IKEA Skadis pegboard backings, extracted from CNC_Maker on thingiverse here (which I've printed before and love how snug the fit is) to RemiRafael's awesome modular enamel pin display so I could decorate my pegboard with my…
- Downloads
- 156
- Likes
- 23
- Rating
- 4.5
P
PrintablesContrive3D
Teenage Mutant Ninja Turtle Wall Art/Comic Book Stand Backing TMNT
This TMNT comic book stand backing can slide into a comic book stand that allows for backing/plate changes and can also be hung on the wall and used as wall art. If you are obsessed with Teenage Mutant Ninja Turtles then I think you'll…
- Downloads
- 154
- Likes
- 41
- Rating
- 0
P
PrintablesFalling Entropy
Smiley Emoji Drink Coasters - Just add cork backing...or not :-)
Print in a set of 4 or any number you like. Add an optional sticky-back piece of cork to the underside of the drink coaster to help keep it from sliding.
- Downloads
- 147
- Likes
- 61
- Rating
- 5
P
PrintablesSergeBakharev
Backing Plate for Xin Dian Vise for Carvera 4th Axis
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
- Downloads
- 143
- Likes
- 17
- Rating
- 5
P
PrintablesNightLonk
Milwaukee M12 Battery: Smaller Backing
I loved the original model but the foot was just a bit too long to fit into my Milwaukee M12 Rover handheld floodlight. This remix shortens the “back” of the foot so it's compatible and the battery now fits into the tool correctly
- Downloads
- 137
- Likes
- 17
- Rating
- 4.33
P
PrintablesGetahobbie
Lebula 7 inch screen case (just the backing)
I remixed the backing of this ( https://www.prusaprinters.org/prints/10886-elecrow-7-inch-lcd-screen-case-no-gluing-required ) because it is a different brand and some of the connectors were in different places. Print instructions I…
- Downloads
- 122
- Likes
- 15
- Rating
- 5
P
PrintablesindistinctTalk
Jurassic park keyring with backing
Simple remix that adds a base to the original, making it more durable. The downside is that it's only viewable from one side. Add a colour change to make things stand out. Category: Keychains
- Downloads
- 118
- Likes
- 12
- Rating
- 5
P
PrintablesScottE
Backing plate for "120mm Fan to 4 Inch Duct"
I wanted to mount a 4" exhaust duct through a casement window to vent ABS fumes from my printer, so I made this backing plate for https://www.printables.com/model/474337-120mm-fan-to-4-inch-duct-f3d-file-for-other-sizes so that I could…
- Downloads
- 113
- Likes
- 10
- Rating
- 0
P
PrintablesCJ I.
Prusa Mini LCD Display Backing Cover - USB
This is a remix of the Prusa Mini Displaybox Cover by 4inthonylin to work with the LCD Frame + USB for Prusa Mini created by Frank S I love this LCD frame modification that includes the USB and I wanted to create a backing cover for this…
- Downloads
- 107
- Likes
- 24
- Rating
- 4.75
P
PrintablesDominick LeBlanc
Rotary Tool Sandpaper Backing Plate
A hardback for rotary tool paper sanding disks, turn your rotary tool into a sanding wheel. *3m screw and nut needed* Printing: * No support needed* Infill: 10%+ Wall count: 3
- Downloads
- 106
- Likes
- 26
- Rating
- 5
P
Printablesdancan13f
MAZDA RX7 (2/27) / Coiling Backing Plate Cover remix
This is a remix of Coiling Backing Plate Cover to allow it to be printed correctly with a 0.4mm nozzle. Original : https://www.thingiverse.com/thing:3006071 Printed part list (2) 1 x CoilingBackingPlateCover : Layer:0.15mm Raft:no…
- Downloads
- 103
- Likes
- 16
- Rating
- 5
P
PrintablesZoe Corkhill
Display Embroidery / Cross Stitch Hoops for Ornaments - Remix with Backing Panel
I was designing Christmas ornament designs for 80mm / 3 inch hoops for an Advent Calendar stitch along. on my blog (hence the blurred design - it's a surprise!) and wanted to print some display hoops with an added back piece - so I…
- Downloads
- 84
- Likes
- 25
- Rating
- 0
P
PrintablesEdward Watts
Unifi Access Ultra backing box
Unifi Access Ultra backing box for UA-Ultra
- Downloads
- 80
- Likes
- 3
- Rating
- 0
P
Printablessteffanders
Fein Multimaster backing pad protector
The ultimate protective cap for the Fein Multimaster sanding pads. Easy to put on and effectively protects the Velcro fastener of the sanding pads during storage. There is one model for the thick sanding pads and one for the thin ones.…
- Downloads
- 80
- Likes
- 12
- Rating
- 5
P
PrintablesDJ Shrimp
Pin cover/backing
My son lost the backing/cover to a Pokemon pin, so I made one. I used TPU filament. It works very well.
- Downloads
- 76
- Likes
- 8
- Rating
- 4
P
PrintablesMark Woodward
cut up hylian sheild backing
remix of the backing but the are cut up
- Downloads
- 75
- Likes
- 1
- Rating
- 0
P
PrintablesNGD Nie Genug Design
Embroidery Backing Holder
Our Embroidery Backing Holder is designed to simplify your embroidery workflow. Say goodbye to struggling with loose backing materials and hello to a more organized stitching experience. This holder securely holds your embroidery fleece,…
- Downloads
- 75
- Likes
- 46
- Rating
- 0
P
PrintablesMorgan Lee
General Electric Logo with Backing (GE Coaster)
GE logo around the size of a typical coaster.
- Downloads
- 72
- Likes
- 7
- Rating
- 0
P
PrintablesRob
Benjamin Franklin Clock with backing plate, different bob and pennyweight
This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…
- Downloads
- 71
- Likes
- 12
- Rating
- 0
P
PrintablesSpiderBot8
Shower head holder with adhesive backing
Mounting: I tried using a command strip, but it only lasted two showers. Waterproof VHB mounting tape from 3M seems to hold much better. https://www.amazon.com/dp/B0BQYM63N5?psc=1&ref=ppx_yo2ov_dt_b_product_details Slicer settings I used:…
- Downloads
- 70
- Likes
- 8
- Rating
- 5
P
Printablestabicat
Skadis universal peg backing template
These templates can be used in many ways. You can print them out as-is, and then just glue them to whatever you want to attach to your Skadis. You can also import them into your design tool to merge them into your model. No need to…
- Downloads
- 61
- Likes
- 8
- Rating
- 4
P
PrintablesArgonel
Samsung S24 Ultra backing plate
This backing plate protects the camera modules and prevents rocking when set on a flat surface. Attach with double stick tape.
- Downloads
- 61
- Likes
- 6
- Rating
- 0
P
PrintablesKIL0
Backing Utencils Box Small
Small Box for most common backing utencils fitted to package sizes.
- Downloads
- 55
- Likes
- 14
- Rating
- 0
P
PrintablesShane Reetz
Honda CRX Door Handle Backing
Test fit on a 1991 Honda CRX. Same part fits both sides of the car. I deleted my door cards in favor of racecar style flat ones. These cleaned up the look a bit and don't add much weight.
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
PrintablesRaindrop Works
Star Trek DS9/VOY combadge backing
Aaron Rhodes made a really nice DS9/VOY/TNG Movie era combadge . UnimatrixRed went a step further and made a magnetic back for it along with a sweet display stand . But, unlike his TNG era combadge, he didn't make the adapter to let it be…
- Downloads
- 54
- Likes
- 14
- Rating
- 0
P
Printablesanchorman.nz
Seadoo Fishpro Garmin Backing Plate
Seadoo Fishpro Garmin Backing Plate for the terminals of the Garmin FishFinder..
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesContrive3D
Stand for the TMNT backing - ***Work in Progress***
This stand was quickly created to go along with the TMNT backing that we posted. We didn't post it originally because it is a work in progress but we have received messages about it so we decided to go ahead and print it. The “bar” slides…
- Downloads
- 53
- Likes
- 13
- Rating
- 0
P
Printablesbric_prints
PSU Logo Only, Hollow With Backing
Penn State University Logo Only With Backing
- Downloads
- 53
- Likes
- 1
- Rating
- 0
P
PrintablesDaniel Zimmerli 🖖
Lower Decks Fansets Frame Circuit backing
This is a circuit backing for the Frame for Fansets Star Trek Lower Decks badge. I recommend doing black and then changing filament to white or silver for completion. This can then be glued to the back of the frame for a more screen…
- Downloads
- 49
- Likes
- 17
- Rating
- 5
P
PrintablesHHobbyist
Scotty 441 Backing Plate
This is a re-creation of the Scotty 441 Backing Plate. It is used to add structure behind 241/244 4-bolt mounts on thin-walled vessels. You can also use it as a spacer, which is what I use it for. Printing Recommendations: Print with ASA…
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
PrintablesSergeBakharev
Carvera Tool Rack Backing
Replacement tool rack plastic backing and supports. Print the flat backing, and bend it in an S shape. Glue on 3-4 of the supports to the outside to keep sharp 90 degree angles. If you have damaged the tool holders, you can order…
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
PrintablesThirtybird
Croc charm backing for 3D printing
This part allows you to add a 3D printable croc backing to anything you can open in your slicer. Does not require gluing afterward. Orca/Prusa/Bambu Right click on your model and click “Add Part” and click “Load” - and add this STL to…
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
PrintablesMike J
CYD 2.8'' single type-C case battery backing
These were made by cutting and splicing the original model with Tinkercad, not the best quality, but they work. You will need the top plate from the original make.
- Downloads
- 44
- Likes
- 4
- Rating
- 0
P
Printablesdevbloggs
Magnetic Nametag Backing Plate
Used superglue to attach 10x2 magnets to name tag and printed backing plate. Originally designed with square corners (not very comfortable if using against skin), then added rounded corners to make it a bit less uncomfortable. Print…
- Downloads
- 44
- Likes
- 4
- Rating
- 0
P
PrintablesPanUpVision
CineTape horn backing w/ 1/4"-20
Modernizing the Cinetape backing. Can be printed at an angle or with interior side down, both needs supports. Tolerances are fairly tight, so best to calibrate your filament. Gasket is meant to be printed in TPU. Everything else…
- Downloads
- 41
- Likes
- 4
- Rating
- 0
P
PrintablesPokeyCat
Arnoz Flash25 Flasher Case Backing
Small mount for the Arnoz Flash25 + Plug: https://shop.arnoz.com/en/classic-leds/88-flash25-plug.html and standard sized dome covers (I used these: https://www.ebay.com/itm/185366776213 ). Slot on the back is slightly tight for the plug…
- Downloads
- 41
- Likes
- 5
- Rating
- 0
P
PrintablesStarwhooper
strike plate backing OpenSCAD
The origin was in brown, what was not more attraktiv after i paint the doorframe in white.
- Downloads
- 39
- Likes
- 6
- Rating
- 0
P
PrintablesKaren Chau Designs
Candy Corn Bead Earrings with Backing Card Holder
Have some fun this Halloween season with some candy corn earrings! Download the variety of candy corn beads to design your own candy corn earrings. Earring card in the shape of a candy corn is also included so you can keep your Halloween…
- Downloads
- 39
- Likes
- 28
- Rating
- 0
P
PrintablesTipTopTomCat
Backing Tool Head for Bookbinding
NOTE: This model only includes the toolhead, not a dedicated handle There are several historical methods for backing/rounding during the bookbinding process, such as backing hammers. This tool head mimics existing "Backing Tools" found…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesWorldspawn00
Solid backing for 3-color blend swatch
A solid 1mm thick layer to add to the swatch design for translucent colors. 2 versions, 1 for a solid color (white or black work well to contrast the color layers), and a split version for those with a material system that can handle 5…
- Downloads
- 37
- Likes
- 7
- Rating
- 0
P
Printablesgreecher
Voron Heart Logo w/ Backing
Liked this for the bottom of my V0, but had to add a backing, and while i was at it, i added Voron Logo & Text. Although I did it for my V0, should work anywhere you would like :). This is a simple color swap, used .3mm layer heights, so…
- Downloads
- 36
- Likes
- 12
- Rating
- 0
P
Printablesthinkingalaud
Letter Board Backing
When I printed the Letter Board, I had to scale down the frame to 185mm x 135mm x 12mm, but the board itself wiggled around. This backing has just enough to be snug and keep it in place (with the help of some glue). Also fixed the Q piece…
- Downloads
- 35
- Likes
- 10
- Rating
- 0
P
PrintablesLigia
Picture Frame backing clip slim
A slim model at just 3mm to hold your photos in place on a frame
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
PrintablesSean Walker
Multiboard Tweezer Holder with Screw in Backing
Multiboard Screw-in Straight Tweezer holder Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
- Downloads
- 34
- Likes
- 4
- Rating
- 0
P
PrintablesTri_Engineer
Backing Powder Dispenser - Backpulverspender
I've been on the lookout for a handy way to store baking powder or vanilla sugar, but haven't had any luck finding the right thing. These dispensers are a breeze to fill from the top, and you can grab individual packets from the bottom.…
- Downloads
- 33
- Likes
- 13
- Rating
- 0
P
PrintablesZombie Feynman
Parametric hook with backing plate
A parametric hook with a flat backing plate, designed to be mounted onto a flat surface such as a kitchen or bathroom tile using double-sided tape or glue. N.B. There's a (rather hilarious) bug where the hook looks flipped upside-down in…
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesApocrathia
Backing Plates for Pannier Hooks
Building off of dylan's design, I threw together these backing plates, allowing me to attach the pannier hooks to anything that may not have a reliable enough surface to mount on. For my purpose, I used these to connect the hooks to some…
- Downloads
- 33
- Likes
- 6
- Rating
- 0
P
PrintablesDario
RV /Trailer backing plate for shower valve
Decided to install a thermostatic mixing valve in our RV. The mounting surface is thin fiberglass so created this backing plate to add reinforcement. It is designed for fixtures with a 4" center to center spacing (100mm) between hot and…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesNatalie T
KnuKonceptz Mini-ANL Fuse Holder Backing Plate
Made so you can clamp or add an adhesive backing to a KnuKonceptz fuse holder. Requires a M3 threaded insert up to 3mm deep. For this fuse holder…
- Downloads
- 28
- Likes
- 6
- Rating
- 5
P
Printableslangbrandon28
Command Strip Backing
This is a crude replica of the clear plastic piece that backs large command strip hangers. I printed mine with supports on the tab. Be very careful when cutting out that support.
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesMoggert
Puzzle Table Screw Clip (Picture Frame Backing Clip)
This is a Puzzle Table Screw Clip was created to work for a Large 34"x26" Jigsaw Folding Portable Puzzle Table. However, this Clip can be utilized for Large Picture Frame or as Picture Backing Clips. The Main Screw Hole is sized for a #6…
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
Printablesinnercube
Umbilical Passthrough backing plate PUG Remix
I liked thericks idea of the umbilical passage, but I needed to adapt it to fit my thicker back panel (3 mm panel + 3 mm foam). The step is 5.5mm so the foam gets compressed a little. I also added a little strip to align with the slot in…
- Downloads
- 27
- Likes
- 11
- Rating
- 0
P
PrintablesMakerCameron
Bambu Lab X1/X1C Auxiliary Fan Backing Plate
Early Kickstart-era Bambu Lab X1/X1Cs featured double-sided tape to mount the fan to the inside of the case shell instead of screws in later builds. After doing a repair, I found it difficult to get the new double sided tape to stick the…
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesHouse Diablo
Screw On Pin Backing
This came to be because I saw many of my colleagues using stuff like duct tape and folded paper to hold their name plates on to their uniforms after losing one of their pin backings. These are easy to print and should securely fit on to…
- Downloads
- 27
- Likes
- 0
- Rating
- 0
P
PrintablesCatCapricious
Two Piece Magnet Backing for Core One Wyze v4 Camera
For the magnet backing, print the two parts without supports, then glue the flat sides together with super glue. For the lens hole filler, place this piece into the case before putting the lens in.
- Downloads
- 26
- Likes
- 5
- Rating
- 5
P
PrintablesBFD281
Motorola ATX4000 Portable Radio Backing Plate for Shoulder Strap
Updated 9/2024 - Changed design to be stronger. This is a backing plate that uses the belt clip for portable radios used by firefighters to attach a shoulder strap, this replaces the usual leather or nylon holster that holds the portable…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesSnerkLabs
KLR650 Water Pump Mechanical Seal Driver + Backing
Simple seal driver and backing support for installing a water pump mechanical seal into your KLR650 engine cover. Designed to be used with a 5/16ths bolt. Be sure to use washers on the prints to spread out the load and use a high infill…
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesHenri Vandersleyen
LED light for Z-axis (Ratrig V-minion) no lip backing
Removed the lip as I couldn't get the 10mm led strip to slid in. This isn't an issue if the LED has a glue backing for easy application.
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesDiabIo
Low Profile Door Hanger + Insert for Backings
A quick model that comes in two parts. Door hanger Rug/Poster/Tapestry backer The backer hooks into the low profile door hanger so that you can add it to the backs of any posters, rugs, tapestries or anything you can think of and quickly…
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
PrintablesChyneuze
L bracket and backing cutout for the great Everlanders Starlink case
Just a modest contribution to the great Everlanders Starlink case ( https://www.thingiverse.com/thing:5722239 ) Some L brackets and a bottom backing cutout : 2 models of L bracket: one standard and one wire reinforced. Printed with the…
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
Printablescrittceptionz
Pin Backing remix
Nothing special really needed for this print. You should be able to use any pattern and the usual setting you would use for any basic print. Used PLA because that's all I have for now.
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
PrintablesFalling Entropy
π (Pi) Drink Coasters - Just add optional cork backing...or not :-)
π (Pi) drink coasters…print in a set of 4 or any number you like. Add an optional sticky-back piece of cork to the underside of the coaster to help keep it from sliding.
- Downloads
- 22
- Likes
- 10
- Rating
- 0
P
PrintablesThatJdmGuy
Marshall cabinet backing plate
i couldnt find my backing plate so i made this one, the tolderance for the 1/4 inch cable is great but i do reccomend a not to hold it in place. printed with mk4 prusa 0.8mm nozzle .30mm detail 10% gyroid infill Petg no supports honestly…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesTycho Magnetic Anomaly
Custom Backing for Hexagon Wall Shelf - Funko Pop
Youtube playback keeps defaulting to low quality. Please manually select 1440p when watching. https://sketchfab.com/3d-models/hexagon-wall-shelf-funko-pop-custom-backing-717b28b1d6884ed3a78fd84e2b713bc4 A quick and easy to print custom…
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
PrintablesMattmannz
Updated CoPrint Ender3V3 carriage and backing plate
Loved the original model so I remixed it to add heated inserts to the carriage and backing plate. There wasn't enough meat around the belt mount to put inserts so these remain as threaded into the plastic. You will also need the locking…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesKK20100KK
Backing pad for 10 in. Drillmaster Random Orbital Polisher/Buffer
Original fix for broken backing pad
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesTravmac
Hex Backing with added T-Slot Fixture
Designed a backing plate for use with display shelf. Bolted together using #4-40 machine screws. Glued the display shelf to this for extra support. Also diffuses some light for an accent light project showcasing some 3D prints. Designed…
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesWrathernaut
Terraforming Mars (Multicolor or not) Player Mat with Backing Plate
For the player mat: When doing multi-color printing, select color to match name of the parts in the model. For single-color printing, do not print the “white”, “gray” or “black” parts, which will open windows for the cards which can be…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesThe Free Heathen Workshop
FHW: Classic Christmas Ornament Star with backing
Hello Tribe, This is my take on the classic star ornament, with a twist. when I designed this star the goal was to make a space in the star so you could put you Festive photos, also for a change you could paint the centers with sparkle…
- Downloads
- 19
- Likes
- 7
- Rating
- 0
P
PrintablesLambtor
Backing / border for star trek lapel pin
I printed this at 0.2mm in sainsmart black tpu. I just wanted this to look more like the lower decks badge if I was going to wear it. Keep in mind this won't snap into place - you'll probably want to use double sided tape on the inside or…
- Downloads
- 18
- Likes
- 9
- Rating
- 0
P
Printableshazeleyes
Interior Backing Plate for CORE One Left Side Hinge Mod
Rich's hinge was exactly what I needed to make ScottWolf's SKADIS Mod work for my CORE One, but I found installing the hinge to the CORE One frame to be difficult due to the limited interior access, dark back corner, and dark colored…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesJayFelt
CMF Phone 2 Pro Solar Backing
The solar panel used works quite well and will produce a normal charge outdoors and in a very well lit room on the 2 phones I've tested it on (I don't have a CMF phone, yet) Easy to print and easy to assemble. You can repurpose a charging…
- Downloads
- 16
- Likes
- 20
- Rating
- 0
P
PrintablesAlex
TPU Sanding / Polishing backing plates M8x0.75 direct mount + soft versions
sanding and polishing backing plates that directly mount on any rotary tool added soft versions for fine polishing you may need to scale down the parts about 2-3% in case the fit is too loose
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesBob Houghton
Briggs and Stratton Pull Start Claw Backing Plate
This is a backing plate also called a friction plate for a Briggs and Stratton pull start claw. I printed it in PLA and seems to work fine. This was made using a 3d scan of a broken original and I recreated the bolt mounting hole in the…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesk7n
Monoprice HKZW-DWS01 Backing Plate
One of the clips broke off of my original HKZW-DWS01 backing plate, with no replacement available I decided I better design one (I've got plenty more of these things waiting to break during battery replacements). Link to discontinued…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesMainfoldium
Prusa Enclosure Filament Passthrough Backingplate
I just made a little backing-plate to reinforce the area and hole it passes through for the filament pass-through, to give a slight bit more rigidity.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesunhooked
clock backings
Various clock backings for the magnets and windings I already have. Some for 170mm or larger prints, others for anything bigger than 90mm. Some for attaching to walls from the winding hook, some with built in nailers. All have magnet…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesFalling Entropy
Ethereum Cryptocurrency Drink Coasters - Just add an optional cork backing...or not :-)
Ethereum cryptocurrency drink coasters (standard size). Add an optional sticky-back cork piece to the underside of the coaster to help keep in from sliding on the table.
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesAdrien MEILLET
bird earring backing Wall-art
Nice earring holder, very easy to print 0.2 mm per layer Happy crafting and have fun!
- Downloads
- 14
- Likes
- 6
- Rating
- 0
P
Printablessrirachachacha
Pin Backing / Pin Clasp
Replacement pin backing with tapered hole for a snug hold. Hole has an internal depth of 6mm Prints well with PLA
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
Printableswrussell
RS600 Kicker U Bolt Backing Plate
You'll want at least 4 walls thick and 80% infill. Recommend using PETG
- Downloads
- 14
- Likes
- 0
- Rating
- 0