728 models
This is an io shield for the Z440 motherboard. This is required if you recase your Z440 like I did. To get this to fit properly in my case i had to use some side cutter wire snips to trim the tabs slightly but it's otherwise a very nice…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a wall backplate for the charge station of a ZooZee robot vacuum. This backplate will offset your charging station from the wall, in case your wall is uneven or you want to run wiring behind it. The offset has a clearance of 15 mm.
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Fixture for milling flats on a backplate for a k11-100 chuck. Jig helps to position the backplate in the vise at to the corrrect angle. 2 x 2 flats are needed to hold the chuck in the vise or to mount it on a rotary table.
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
Backplate with switch cutout for the MeshNRW Heltec T114 Case
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
I was building a NAS out of a Thinkstation M920Q and the ASM1166 card was touching some metal when inserted into the PCI-E slot. So I designed a snap on isolating backplate. It holds itself on purely by friction. If you want it to be held…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
I made this Backplate for AMD AM4 Platform. The Model is like the Original. You can Print this in PETG, but i really recommend any Carbon Fiber Filament, like PETG-CF, PLA-CF or ASA-CF/ABS-CF. The holes dont have a thread, its because if…
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is…
This is a 5015 fan inlet for EVA 3 where the fan is oriented parallel to the backplate. Use this part if you have not enough space in the back of your printer for the new fan orientation of EVA 3. Print one of the three arms to attach the…
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
Support may be neccesary, depending on how well tuned your bridging setting are. There is a little breakaway support, and the parts should be printed in the same oriëntation as they load in the slicer. They are only compatible with…
Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each…
Uses 4 M3x15mm bolts 4 M3 nuts 4 M3 washers (optional) The backplate has a second version which doesn't require supports and will bridge the overhang instead Consider rotating the retention mount for better strength. That will instead…
Airsoft only non functional install like normaly we spac swap backplaye
This Backplate / Bracket provides protection from accidentally hitting the two exposed buttons on the side of the device while also giving you a place to hook a carabiner or cord for easier carrying. The bracket was designed to contour…
This is a very simple design for my WE glock 19, but should be compatible with most other glock models. It can be used as a replacement or as a base for custom rear mounted charging handles
This is a 1:1 replacement model for a Shure sm7b backplate. Feel free to edit it with your custom logo! Category: Replacement Parts
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…
I wanted to mount my Xiaomi Mi Light Bar controller under my table, but unfortunately, there was no screw holes in the original base. You need to print: 1pcs Base 3pcs Clips Printed with .4 nozzle at .2 layer height in PETG. However, even…
X carriage and Microswiss clone models Printed them to mock up the hot end cooling I was developing. Matches my E3 Pro perfectly Built in, cut-away support for the nozzle Category: 3D Printer Parts
Edit https://www.thingiverse.com/thing:3080514 for stock fan (wraith stealth cooler) AMD ryzen 5 2600 or other ? Print instructions Unassociated tags: Stock fan amd am4, wratch stealth Category: Computer Summary Edit…
Z390-A PRO MSI SHIELD BACKPLATE. I bought the motherboard as used, backplate was missing. I found a similar one somewhere, and edited in Windows 3D builder in a few minutes. The 3rd variation was a charm :) Check our Youtube channel:…
A battery cover for Philips remote. Not sure of the remote name but seems to be BRC0884402/01 Replace Remote Control -VINABTY BRC0884402 01 TV. I use the remote with my philips 50pus6704/12 tv. The design can be improved in multiple…
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
Starter kit for modeling your own Ender 3 Neo shroud. (took a lot to find.) Big thanks to everyone who supplied the files for this. (NOTES) You must orient this to your personal measurements. This is not oriented dimensionally together…
~ UPDATE: 08/08/2024 ~ Added a v3, easier nut catch more sturdy side mounting options. V3 has three options. Top mounted, Double mounted and bottom mounted. If you're going to use the Top mounted or Double mounted options, you will need…
Remixed backplate to add extra strength, holes for nylock m3 nuts, and flush cap head screws for the linear rail.
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
tsuga's sprite pro CR touch mount was a great design, but on the ender 3 v2 when the x axis was home'ing it would slam into the x endstop cover. So I moved the CR touch mount forward by -4mm's. This does mean it's no longer a zero offset…
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…
I installed a front-idler tensioner mod on my RatRig VCore3, and wanted to remove the pesky backplate tensioners from my carriage, so I whipped this super simple version up in OnShape. Literally just flattened out the backplate, and…
This is a magnetic backplate for a Voron V0.2 that replaces only the lower rear panel. It can be printed on a voron 0.2 itself and fastens together with clamps. Depending on your printer, some tolerances might be too tight and need some…
@ALX_1707 Had made an awesome kitchen thingie. I just needed to edit it a bit for a better view to text. Now I don't need to kneel in front of my dishwasher to see whether there's dirty or clean stuff inside. kudos @ALX_1707
Backplate to install a Philips Hue Tap dial switch on top of an existing (NL) light switch in such a way that the original switch mechanism remains accessible (albeit without its plastic coverings). Similar (commercially available)…
New Version Here This is a drop-in replacement for the Bosch 12V charger (GAL12V-20) that adds two slots for wall mount screws. This mod only requires a Philips screw driver – simply remove the two screws on the existing backplate and…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
AM4 Backplate for Ryzen CPU AMD Motherboards use ABS or other High Temp Material do not print in PLA. You also need some screws depending on your cooler, also use a light one.
Printing Instructions Print on it's flat face without supports, just remove and tidy up the single sacrificial layer where the screws go, a sharp knife is a good tool for the job. I printed mine in black Prusament PETG on the Prusa Mini…
I remixed this case because I needed to add more space for the backplate cooler ( https://www.aliexpress.com/item/1005006009318799.html ) and wasn't satisfied with the other remixes out there. Based on some other comments on the other…
I love the blinking owl key holder, but the original does not have a good way of attaching the part to the wall (except double-sided tape maybe). This is just a simple cutout for mounting with one small screw. Please note that the…
Backplates (to customize) for attaching tools to peg boards. Designed for peg boards with 1in hole spacing, 1/4in holes, 7/32 thick. Three configurations: 2x2, 3x2 and 5x3 Best print orientation is upside down.
Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system. 1. Two original landing sizes - square 50x50mm and square 85.6x85.6mm. For M3 screws, for M4 you'll need to drill mount for head probably. You can use these mounting…
Remix of UL G203 by K4mi1, Made the pegs bigger because they were breaking on me and added a screw-less version. Flip it 180 degrees so the pegs are pointing up, use tree support, use either 10% or 100% fill. Sand until the palm grip is…
Rear plate for voron 0.2 with 120mm fan
HYTE Y60 Horizontal GPU mounting bracket. Requires cutting of case and drilling holes in case metal to install. Designed to allow for horizontal GPU mounting inside of the HYTE Y60 case for better airflow and cooling. ONLY FITS Y60 CASE!…
4/20/25 update: Added new variant with removable battery compartment plate. Use two M3 heatserts and two M3 6mm flat head screws. 6/16 Update: Added to project parts list in below description. Uploaded beta version of battery pack version…
Wanted a backplate for my Nest Thermostat to cover up the holes left from my previous older thermostat but I didnt like the large ones that Google sold that felt like they dwarfed the Nest. My version covers any holes within a diameter of…
If your printer is too loud, you have now the possibility to use the silent mod from my video. The noise comes from the rear cover and its 4010 fan. Step 1: choose the preferred fan mod. either the 4020 blower fan or the 6015 axial fan…
I made a backplate for the original model. Enjoy the extra storagespace
Remix Information Modifications to the "Wandering Hour Clock" by clockspot Most details are included here but for full build details see my web page for this clock. Geneva Drive Clock…
The new gantry adapter works with the official creality linear rails kit that comes with a new backplate and 4 bolts. Creality rail kit for ender 3 You have to use both model for this to work as both have been adapted to work toggether.
After some of the screws coming lose with heavy repeated use, I wanted to try threaded inserts in the backplate to hopefully make it a bit more robust. I found this really helps the tension screw and allows you to add more tension then…
This is a modular hexagonal shelf design for displaying Goodsmile Nendoroid figures. With these shelves it's no longer necessary to use the clear plastic stand that comes with most nendoroids, just insert the arm that holds the nendoroid…
These bushings can easily crack or become damaged due to extensive use over time. This model is an easy replacement. The model is the fairly common 18/20mm Ø. The ones in the pictures are printed using Esun PLA+, with the regular 0.2…
Socket 115x replacement backplate for Dell coolers that normally mount directly into the case. This part prints fine with 20% infill and 4 outer walls for extra strength. PLA should be fine temperature-wise, but more a heat resistant…
I received an old AM3+ motherboard and processor with its backplate and retention brackets missing. The latter I could find here. Sadly I found no suitable backplate so I whipped out Fusion and made one. I recommend you to print with…
Replacement backplate for the Cenmate 4 bay DAS (non-raid version) that allows using a standard 80mm fan instead of the noisy 50mm original. I'm using a Noctua NF-A8, but any 80mm fan should fit.
This is a remix of https://www.thingiverse.com/thing:3716110 The Bear upgrade of the x-ends caused the x-belt to rub against the stock MK3S+ extruder backplate. I modified select areas of the Bear x-ends so that the belt would sit just as…
This is a remix of the original backplate by LtChipotle_242586 , modified to fit a thicker 81Wh battery without putting pressure on the shell. The internal geometry has been reshaped to give the battery extra clearance, keeping everything…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
Just a quick mod for added stability and lower tolerance requirement!
I remixed for Mercury One Plus but this will work for normal EVA as well. Let me know if you want other custom mod.
BTT filament sensor backplate with ears This backplate provides 2x M3 holes to mount the filament sensor whereever you want to. In my case, at the back right extrusion of my Voron 0.1. I printed it in eSUN ABS+ with 40% infill so with…
The knob was hard to turn so I made a bigger one. The sign was hard to see so here's an angled back plate. I used 12mm x 3mm magnets instead. To keep it from sliding I put a thin layer of E6000 on the back. You can use silicone sealant,…
A Wall mount backplate for the Ubiquiti Unifi InWall Blackplate UAP-AC-IW with the 2 ports
Got a SATA expansion card for my PC, but the metal bracket that came with it didn't actually allow for the card to seat fully in the PCIe slot. Didn't want to measure the hole distance exactly (and inevitably screw it up *fner fner*) so I…
The PSP Go uses the same battery connector as the Vita 1000. I found a few extended backs, but they all required taping the battery in place. On top of that, there was no way to access the M2-to-SD adapter from the outside. I used…
Backplate for Trimui Model S / Powkiddy A66 with extended space for a 523450 Li-Po battery. WARNING : Opening, modifying your handheld may void your warranty. I will take no responsability if you break something. To do this mod you will…
This is a replacement backplate for a TFA Dostmann “AirCO2ntrol Mini” CO2 sensor that includes a separate compartment to hold a Wemos D1 Mini connected to the sensor's debug port through a passthrough slot. The ESP allows you to put the…
Hallo, hier ist kurzfristig ein Update der Backplate. Diese ist um 2,5 mm schmaler als die original STL. Bald ziehen alle STL auf diesen Account um. CRYDTEAM
This tool helps you open up your watch if you want to do some cleaning or other maintenance like I had to do. I needed it to fix my automatic winding mechanism in my watch (Fossil ME3181) but did not have the tools available, so after a…
Gridfinity Desk Organizer - boxes | templates | backplates It's made for organize your desk. You can choose wariant of boxes and base plates or make your own design. Please let me know your experience.
This is a custom backplate for the Fractal Design Terra PC case. It comes with hooks, and cutouts for important peripheral connections (modify at will using the included Parasolid file). Recommend printing in something flexible (I used…
This is my first model, which is a remix of the mount from Fevvahz for the Ring Doorbell Pro 2. I had a skybell, which i replaced with a Ring Doorbell Pro 2, the skybell existing mounting holes were much wider than the ring doorbell, so i…
I took measurements of the broken piece after i broke them trying to fit all my terrible cable management inside. I print them using 0.2 quality on a anycubic kobra pro 2 using speed pla ( i think it is pla+). If you need it like me…
Since I'm using multiple Raspberry Pi CM4's and IO boards as NAS and docker hosts, I needed something to mount them on, other then the cardboard box they came in. So I made this simple backplate with standoffs that match the mounting…
A remix to add heated inserts to the tensioner-less Eva3 CoreXY backplate. Happy printing!
ENGLISH I lost the original control cavity cover on my 2011 Gibson Les Paul Studio. After realizing that replacement covers available online are either overpriced or don't fit the Studio model properly, I decided to make my own. The model…
Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties. I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it…
Simple back plate for a door knob in art deco style For best results print in resin or finish with filler and paint
was looking for this but couldn't find it has no DVI port
This is my remix of the original EVA 2.4.x cartesian backplate . Sometimes you need more cooling than a single 5015 fan. So another user “Pinky” found an interresting fan. The Pabst EBM RLF 35-8/14 N. He was very happy on the performance…
Use your normal or fast profile. No need for supports
A1 Mini Compatible This is a print & play no cut backplate mod and spacer for the New 3DS XL that allows for the use of a 5000mAh battery & Micro SD Card Extender which can be found on amazon, ebay, or aliexpress. This is the final…
Voron 0.1 / 0.2 Magnetic Backplate *06-11-2023* *added voron01_backplate_shroud_fanblock* 07-10-2023 Updated photos This prevents the spool from blocking access to the fan severely limiting airflow to the RPI. use 4x more m3x5x4 heatset…
Simple Elgato Prompter backplate for Logitech webcams like the C920 HP Pro. Print instructions: 0.4mm nozzle 0.2 layer height Support on build plate only.
i designed this backplate to give my R36S retro console a Nintendo'ish look on the back. printed on bambulab a1 mini with 0.08 height, 10% infill and ironing on the top layer to give it a smoother look for the logo. i just glued it over…
Radiomaster Zorro 18650 addon backplate holster mod. 2s2p 18650 to add your zorro battery capacity. Radiomaster Zorro lacks battery capacity. This helps a lot. You can glue the JST connector to this and make short balance lead.
It's highly recommended to check the circuit board and the printed model together before you tighten the screws. Check the distance between the front plate and the LCD display while you are tightening the screws. There is a safety net in…
This is the 3rd version of a DIY 5K monitor build I've been working on. See v2 here . I wanted a good 5K monitor but didn't want to spend $1600 on an Apple Studio Display or $1300 on an LG Ultrafine. It turns out they use basically the…
I noticed there was a few places to hook on a backplate to the Rhinoshield bumper case so I made a bunch including some ridiculous and impractical ones. The plain models you can make pretty fun by loading them to your slicer and turning…
Original description from Space's design - I've added the RST and PWR text by the buttons and, with v2, updated the geometry of the screw bosses as I found them to be undersized and off-center: This Backplate / Bracket provides protection…
Only a small modification of the "Ender 3 S1 Pro Sprite Extruder cooling solution" by Shredy to add a clearance between the small arm to which the fan is screwed an the Taurus to minimize bending. My settings: PETG LH: 0.2 Walls: 4
Updated backplate Filament - PLA/PCTG/PETG (any) Color - Dual color black/gold (any contrast color will do) Layer shift - shift color at layer 11 (if you do not have a multicolor printer)
These are custom mesh screens to go on the inside of the Legion Go Backplate by FSULAUBACH found here . This post is the meshes only. I wanted a finer mesh on the inside of FSULAUBACH's backplate because the vent holes are a little larger…
Backplate for the Atomstack 20 Pro Diode Laser Series Controlbox, it fits on all Atomstack 20 Pro Lasers.
