Search results: ban

Sort order

10,028 models

P
PrintablesThisfact

Rubber Band Gun (Print-In-Place)

Rubber band gun thing: Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger. UPDATES : Feb…

Downloads
29,966
Likes
3,788
Rating
4.55
P
PrintablesBrawlybanana327

Rubber Band Plane

Instructions: Print flat on build plate at 0.2mm. No supports/brims needed Let build plate cool sufficiently before removing from bed. To assemble: Flip it so that the protrusions face down Bend the vertical stabilizers up 3. Adjust the…

Downloads
15,844
Likes
2,490
Rating
4
P
PrintablesTeachingTech

Simple Z banding/wobble test tower

Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…

Downloads
15,405
Likes
660
Rating
4.95
P
Printablesfifindr

Articulated Banana Buddy

Meet the Articulated Banana Buddy – the ultimate chill companion! 🍌✨ Print with no supports! ✅ 85mm Tall – Perfect for desks, shelves, or office spaces ✅ Articulated Legs – Can dangle its feet off any edge ✅ Wholesome & Hilarious – The…

Downloads
14,557
Likes
1,953
Rating
4.87
P
Printablessquinn

Parameterized Cuban Chain

This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…

Downloads
11,639
Likes
1,759
Rating
4.86
P
PrintablesJallim

Rubberband Submarine - Print in place

Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…

Downloads
10,240
Likes
3,912
Rating
3.91
P
Printablesfifindr

Mini Banana Buddy

Meet Mini Banana Buddy , the tiniest and cutest banana companion! 🍌✨ ✅ Adorable & Tiny Design – A fun and playful desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅ Lightweight & Quick Print – Weighs…

Downloads
9,864
Likes
1,457
Rating
4.72
P
PrintablesMyuto
18+

The source marked this model as adult content.

Downloads
9,204
Likes
2,378
Rating
4.44
P
PrintablesPrinty Ponky

Banana Katana Remix with Display Stand

This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…

Downloads
8,836
Likes
1,925
Rating
4.53
P
PrintablesBids3D

Mario Piggy bank (better printable)

I saw other mario boxes but they were hard to print because of the fillets on the edges. This box is to organize youre money so you don't have it laying around everywhere. To firmly close the lid you'll need 8 magnets. Size: 6X3mm For the…

Downloads
6,963
Likes
2,007
Rating
4.95
P
PrintablesFADesigns

Mag Fed Rubber Band Gun_2

***OUTDATED VERSION*** Find the new model here: This is an update to the Mag Fed Mini Rubber Band Gun. I have redesigned four parts to stop the back hook from jamming when pulling back the slide. The parts changed are the Grip, Insert,…

Downloads
6,768
Likes
3,466
Rating
4.08
P
PrintablesUliLac

Unicorn Piggy Bank

A remix of a remix - a Unicorn PiggyBank. As is 18cm high, I printed this for my niece in Geeetech Silk rainbow PLA (together with another model to ensure sufficient color changes. Came out nice although the chin overhang IS challenging…

Downloads
6,634
Likes
1,014
Rating
4.89
P
PrintablesEon3D

Chibi Banana – Sweet, Simple and fast 22min

Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…

Downloads
5,984
Likes
904
Rating
4.86
P
PrintablesLoboCNC

Head Bangers

These guys are always butting heads, especially when debating Newtonian physics. They're an inverted version of the classic Newton's Cradle demonstration of conservation of momentum and energy. But why is the middle spring so much…

Downloads
5,330
Likes
1,456
Rating
4.74
P
PrintablesMrHanjak

Piggy Bank

🔵 Piggy Bank 🔵 If you have any coins, the best way is to feed this piglet. ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/c/MrHanjak2017 ■ Video 🔷 INFO 🔷 ■ Steel…

Downloads
5,305
Likes
390
Rating
4.94
P
PrintablesMicah T

Fun Rubber Band Glider ≈4g

This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…

Downloads
5,193
Likes
881
Rating
4.4
P
PrintablesEJTH

Rubber Band Gun MKII - No assembly required!

Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…

Downloads
5,118
Likes
373
Rating
4.58
P
Printableseof

Side Protection for Electrical Insulating Tape /Seitenschutz für Isolierband

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…

Downloads
4,996
Likes
2,863
Rating
4.79
P
PrintablesFADesigns

Mag Fed Mini Rubber Band Gun

***OUTDATED VERSION*** Find the new model here: I have spent a few years iterating this project. Finally it is fairly simple and reliable. This rubber band gun shoots bands from a MAGAZINE. It uses small “rainbow loom” bands, which allows…

Downloads
4,951
Likes
2,596
Rating
4.5
P
PrintablesTridense

Cuban Link Chain

A cuban link or curb chain for your cosplays! Maybe you will dress up as your favorite rapper for halloween The chain in the picture is the 64cm version In the sizes: 64cm/ 25" - (226 mm x187 mm) 71cm/ 28" - (226 mm x226 mm) 82cm/ 32" -…

Downloads
4,814
Likes
524
Rating
4.85
P
PrintablesHexiBase

HexiBox Series: Dayton TCP115-4 7th Order Bandpass Subwoofer

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
4,663
Likes
670
Rating
5
P
PrintablesBeaver

Banana Stand

A stand that holds a hand of bananas

Downloads
4,350
Likes
809
Rating
4.88
P
PrintablesTech Tastic

Quick Rubber Band Gun

A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…

Downloads
4,210
Likes
255
Rating
4.68
P
Printablesuhltimate
18+

The source marked this model as adult content.

Downloads
4,161
Likes
1,056
Rating
4.87
P
PrintablesTCCINTHEHOUSE

Band Aid Case

Tired of asking for a Band Aid on the go? This portable Band Aid case holds up to 5 Band Aids! This case can be thrown into a purse, backpack, pocket, or pouch. This case takes some assembly. Assembly guide: Requires Super Glue. *Printing…

Downloads
4,066
Likes
1,593
Rating
4.79
P
PrintablesSdvaletone

BULLET BILL / BANZAI BILL

"After reading the comments on Joel Tellings video I realised that a lot of people were saying this model should actually be called BANZAI BILL. Most people don't seem to mind but I had a few spare minutes so I've now added another base…

Downloads
4,012
Likes
1,287
Rating
4.93
P
PrintablesFlyAttack

Princess Peach Tiara Costume – Crown, headband, broach and earrings

A smaller-scale princess peach costume parts. Print as lightweight as possible to keep from sliding around on the head. I'd recommend 1 perimeter and low infill %. Designed in mind without needing support. All that's needed to complete is…

Downloads
3,842
Likes
763
Rating
4.94
P
PrintablesGermy ballswell

Whisbang RC whistling bombs

These are printed in flexible TPU and are designed to be as safe and as harmless as possible while still being effective. Drop them from 200 feet or higher to allow them to reach terminal velocity and produce sound. The body has a hollow…

Downloads
3,780
Likes
285
Rating
4.57
P
Printablesoks_amigos

Regular Headband

Need a headband? You're in luck here's one. There's also an f3d file available for an easier remix! Note: Print from the side you can see has a chamfer on it's teeth facing downwards!

Downloads
3,746
Likes
258
Rating
4.9
P
Printablessamsuchin

Rubber Band Powered Plane

This Rubber Band Powered Paper Plane will soar through the air, perform awesome stunts and more! An awesome toy for the Great Outdoors and even inside! (with caution) Materials: THIS Paper Airplane (…

Downloads
3,629
Likes
474
Rating
4.25
P
Printablesateldsign

Band Clamp Corners

Simple strap clamp corners for miter joints, framing, drawers or box making. Print twice to make one corner clamp. The two halves can be glued. Dimensioned for 25mm (1 inch) bands, easy to scale to any other width.

Downloads
3,545
Likes
2,054
Rating
4.97
P
PrintablesSoarpix

PIGGY BANK

PIGGY BANK Easy to print Save your money Lid in the bottom for taking the money out. If you have any questions, let me know in the comments =) Follow me on Instagram : @soarpix3d Subscribe to my YouTube channel

Downloads
3,477
Likes
464
Rating
4.87
P
PrintablesKeep Making

Flexy Banana

A silly little print of a Flexible Banana. It's a great fidget toy. No need for support while printing. Prints in PLA with no problems, but I assume PETG should give the banana even more flex. Be aware that you need to have a pretty…

Downloads
3,461
Likes
218
Rating
4.92
P
PrintablesMakeAUsername

Remix Mario Mushroom Piggy Bank

Ive remixed this to act as a piggybank. original design 3D Printy.

Downloads
3,410
Likes
800
Rating
4.95
P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Downloads
3,326
Likes
365
Rating
4.94
P
PrintablesKevin

Piggy Bank With Plug

Printed with Prusament PLA Silver 0.3mm supports are required. *Update: Added a different plug for easy acces.

Downloads
3,280
Likes
307
Rating
4.9
P
PrintablesWilko_SLO

Rubber Band Eagle Airplane

Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…

Downloads
3,177
Likes
393
Rating
4.4
P
Printablesivan

Headband

Simple headband. Works great in PLA, didn't test any other materials.

Downloads
3,171
Likes
160
Rating
4.79
P
PrintablesSalaman

Rubber band plane Vol.2

The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…

Downloads
3,156
Likes
666
Rating
4.59
P
Printablesrmwphd

Ultra-Faceted Cuban Chain v15

NEW v100a CLASP up NOW!! Enjoy! New v100a files up now! I took a long enough break to finally have a new idea! I can now present a version that can't kink up but still moves like a chain! It's a little thicker/chunkier, but the profile is…

Downloads
3,147
Likes
420
Rating
4.58

Starter Pokemon piggy banks

I believe the original was done by flowalistic. I modified so that they all use the same cap on the bottom.

Downloads
3,123
Likes
441
Rating
4.86
P
PrintablesNikoFly

Unicorn headband

unicorn headband for the delight of little girls

Downloads
3,122
Likes
392
Rating
4.88
P
PrintablesComrade 3D

Boxing Hand Wraps / Bandage Roller

I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…

Downloads
3,100
Likes
282
Rating
4.69
P
PrintablesAgustin Arroyo

Low-poly Pikachu - Piggy Bank

Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…

Downloads
3,086
Likes
576
Rating
4.81
P
PrintablesTwotone74

7 Segment Mechanical Counter, Version 3.0 NO-RUBBER-BAND-MOD

UPDATE 12/2025 As some users reported that the springs become weak after a while, I reinforced them. I didn't test them so far, as my original version still works fine. But I hope, this improves the model and I'm looking forward for your…

Downloads
3,062
Likes
1,045
Rating
4.72
P
PrintablesSanford Prime

Semi-Auto Rubber Band Gun - Fully Printed

A dive into the past, we all had one in our younger years... well most of us anyways. You'd be lucky to find one in between all the NERF guns in the isles today. I was having trouble finding one, so it was time to hop on CAD and make my…

Downloads
3,039
Likes
325
Rating
4.83
P
PrintablesMake it Reality

Cuban Gold Chain Necklace

Recommended Settings. no supports PLA (must be dry!) 0.2 millimeter layer height 2mm brim or raft 0.1mm Z-Hop + retraction Slow speed 210C Nozzle 60C Bed Infill 50%+ 2 thick walls, or up to 4 walls if scaled-up 4 tops/bottoms Illustration…

Downloads
3,037
Likes
217
Rating
5
P
PrintablesPrinterPatrick

Chimpanzini Bananini

Chimpanzini Bananini! wa wa wa! Bananuchi monkey monkey monkey uchi! or Chimpanzini Cocosini? wa wa wa! po po batabim. Coconuchi monkey monkey monkey yuchi! or Chimpanzini Ananasini? wa wa wa!

Downloads
3,027
Likes
122
Rating
4.67
P
PrintablesNils Kal

RTX3080 Piggy Bank

Want to save money for the new awesome RTX3080? Here is the perfect piggy bank to keep you motivated! Kikiina asked me to make this design so she could who give this to her boyfriend who is saving money for a RTX3080, so thanks to you for…

Downloads
3,017
Likes
709
Rating
4.9
P
PrintablesYuval

Compact Rubberband Spiderman Shooter (Web Shooter Style)

print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best

Downloads
2,989
Likes
266
Rating
3.86
P
PrintablesBen

Apple Watch Strap /Band Holder - Large

A tray to hold up to 6x Large apple watch bands Will hold an apple watch band ~ 145 mm long and up to 9mm thick (Will fit the Small/Large Silicone band, the Sports Loop, and the small version of Leather Loop band - check dimensions for…

Downloads
2,987
Likes
484
Rating
4.95
P
PrintablesJohn Doe

Little banana sword katana knife

For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games

Downloads
2,895
Likes
325
Rating
4.82
P
PrintablesRaybo

Just a hair band.

Just a simple hair band with “teeth”. I printed a bunch for my wife, in multiple colors. I used PETG and 0.2mm height with enough perimeters to have them print solid.

Downloads
2,835
Likes
353
Rating
4.95
P
PrintablesJMAW

Serious Edge Banding Trimmer (cheap utility knife blades)

This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…

Downloads
2,812
Likes
510
Rating
4.91
P
PrintablesWilko

Banana 01

I've started to mess around with Blender. I watched a lot of videos and then tried to recreate one from memory.This banana is based on a video by CG Geek and... man... he's fast in the video. I still rendered with Fusion 360 because...…

Downloads
2,805
Likes
84
Rating
4.83
P
Printableslopsidedflan

Banana Katana Remix — thicker blade + connecting block

Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…

Downloads
2,769
Likes
276
Rating
4.56
P
PrintablesMartin_au

Rubber band plane

An attempt to make a rubber band powered plane. Easy and quick print. Doesn't fly well though. It might need a lot more thrust. I hope some of the ideas are useful to others. To assemble, run a rubber band through the prop, insert the…

Downloads
2,689
Likes
348
Rating
3.4
P
PrintablesTHE MOC CHANNEL
18+

The source marked this model as adult content.

Downloads
2,657
Likes
1,381
Rating
5
P
PrintablesGonz Heredia

Minecraft Chest - Use it as a piggy bank or a small box.

Greetings! I made this small box based on the simple Minecraft chest, a charming 3D printable model inspired by the iconic chest from Minecraft. This compact box is perfect for storing small items or serving as a functional piggy bank.…

Downloads
2,419
Likes
1,024
Rating
4.92
P
PrintablesLanzDesign

VasePlane V2 - Vase Mode Glider with Rubber Band Launch System

This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…

Downloads
2,416
Likes
336
Rating
4.86
P
PrintablesMatthew_Ghost

Safe | Vault | Bank | Money Bank | Piggy Bank

Your safe can finally be safe! You can choose several number combinations according to your preferences 🔐 No Additional Parts Required. This safe doesn't need any bearings, screws, glue or additional purchased parts. Dimensions…

Downloads
2,382
Likes
717
Rating
4.9
P
PrintablesMZ4250

Banshee Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
2,375
Likes
80
Rating
0
P
PrintablesKadows

HairSnaps, The Modular Hairband!

HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…

Downloads
2,369
Likes
917
Rating
4.85
P
PrintablesKayl

Stitch piggy bank

A cute remix of Stitch to transform it into a piggy bank. Print instructions Category: Other Summary A cute remix of Stitch to transform it into a piggy bank. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter…

Downloads
2,349
Likes
315
Rating
4.5
P
PrintablesCapra-Audio

Capra Headband V3

Now much stronger and reliable with optional folding! NOTE: if you bought the kit it does not include the parts to make the folding version! Static only! Something to note: If you are not printing your PETG hot enough then the adjustment…

Downloads
2,340
Likes
207
Rating
5
P
PrintablesJiří Vaško

Thule Urban Glide 2 - Leg holder

Leg holder for Thule Urban Glide 2. Print without supports. You can cut model to smaller height.

Downloads
2,296
Likes
103
Rating
5
P
PrintablesIXPatch

Korok Coin Bank (Zelda Tears of the Kingdom)

"Yahaha! You found me!" I love Koroks, especially the ever-tired ones that lop around with a backpack twice their size. They are charming and never fail to make me smile whenever I come across them :) There are two versions of this model:…

Downloads
2,288
Likes
902
Rating
5
P
PrintablesPuhsketti

Flying surprise butterfly toy powered by rubber band

UPDATED to V4. Combined fuselage and hub into one part so glue is no longer required. Simply twist the rotor into a propeller shape using a lighter or hot water then insert the rotor into the fuselage. I recommend using size #8 rubber…

Downloads
2,269
Likes
233
Rating
4.86
P
Printablesnilok

NIH Surgical Mask Tension Release Band - Ear Savers

This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…

Downloads
2,259
Likes
222
Rating
4.85
P
PrintablesArea 3d Studio

Piggy Bank

No need supports. Piggy bank set in the wonderful world of Minecraft. You just have to print the files of the corresponding color, and glue the pieces as in the photo (the head does not have to be glued, it is held well in place with a…

Downloads
2,256
Likes
679
Rating
4.88
P
PrintablesKen Mills

Coin Vortex Piggy Bank

Enjoy the mesmerizing spinning journey of coins as they make their way into the bottom of this hyperboloid coin bank. The ramp simply snaps snuggly onto the vortex rim. Lay a coin flat at the top of the ramp, release and enjoy. Prints…

Downloads
2,238
Likes
317
Rating
5
P
PrintablesPrusa Guy

Prusa Core One Piggy bank

I have prepared the Prusa Core One model for you as a Piggy bank in which you can store your values or gems ;-)

Downloads
2,183
Likes
909
Rating
4.95
P
PrintablesBig Nuts 700

Tic Tac Gun V2 Rubber Band Edition without text

I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…

Downloads
2,139
Likes
379
Rating
4.81
P
Printablesfaultedlogic

Banana

A banana from my wife's fruit bowl. I don't know that it will be useful to anyone. While it's of no use to me, I did decide to print it to see how the result would compare to the original banana. I'm reasonably pleased with the result.…

Downloads
2,130
Likes
132
Rating
4.94
P
PrintablesRobagon3D

Pony Ears with Unicorn Horn Headband Costume

Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…

Downloads
2,124
Likes
299
Rating
4.71
P
PrintablesMZ4250

Bandit Updated

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
2,118
Likes
110
Rating
5
P
PrintablesVpslodya

More durable spring attachment for no rubberband OTF

The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.

Downloads
2,118
Likes
258
Rating
4.67
P
PrintablesBODY3D

Mr Banana

Support me on Patreon Follow me on Category: Other

Downloads
2,088
Likes
208
Rating
4.92
P
Printablesmanmac

Horns on hairband

Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA…

Downloads
2,083
Likes
565
Rating
4.89
P
PrintablesMagmabow

Bangboo from Zenless Zone Zero

(its left arm didnt print properly ;-; i suggest cutting it off in slicer and printing separately too) Im printing the model like this to save time and filament^ Use color painting (or equivalent), or print white and paint. I printed the…

Downloads
2,083
Likes
258
Rating
5
P
PrintablesAlberta3D

Test cylinder - Z banding test

A simple test cylinder, good print to show how consistent or not your Z-axis is. the Base is 2mm thick so you can measure if your z-offset is correct. The cylinder is 100mm so you can measure for your Z-axis e-steps. Base is 40mm x 40mm…

Downloads
2,068
Likes
51
Rating
5
P

Unicorn headband

Diameter 120 mm, you can scale up to larger sizes.

Downloads
2,041
Likes
242
Rating
4.89
P
PrintablesAkshay

CS:GO M84 Flashbang Prop

A non-functional prop M84 Flashbang grenade from the popular PC game - CS:GO (Counter Strike Global Offensive). Model Notes : There are 2 files uploaded for body 3. The truncated version should work for most printers. Body 5 has a version…

Downloads
2,033
Likes
637
Rating
5
P
PrintablesBuildX

#0027 Monopoly Organizer Tray/Inlay - "The Banker"

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Working off of a design by @Jeroen P, I've had to remix…

Downloads
2,023
Likes
395
Rating
5
P
PrintablesJackson

Rubber band gun, 6 shots.

rubber band gun. 6 shots.

Downloads
1,996
Likes
531
Rating
1
P
PrintablesAllpa

Emil the Elephant Piggy Bank // Emil der Elefant Sparschwein

This funny piggy bank in the shape of an elephant can be printed without supports. However, it is a very large model so that enough money fits into the belly and the coins can be easily removed again. The children can let the coins roll…

Downloads
1,976
Likes
515
Rating
4.92
P
Printableszedb13

Shrek Headband

Made these for a Shrek rave I went to Made with Vanilla White Prusament and painted green Needs supports because the ears are wider than the headband

Downloads
1,960
Likes
240
Rating
5
P
PrintablesAmuseables

Fortnite Banana

If you're an adult and have played Fortnite you have most likely been shot by a better, younger, child and are down. You are calling for help from your teammate (your 10 year old cousin) who made you play with them. Celebrate your cousins…

Downloads
1,943
Likes
314
Rating
4.82

Mandalorian Helmet - Piggy Bank

A Mandalorian Helmet piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw mechanism BambuStudio file available here: https://makerworld.com/en/models/486544#profileId-399287 It needs…

Downloads
1,933
Likes
428
Rating
5
P
PrintablesMechaRaptor

Rubberband Butterfly

This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…

Downloads
1,924
Likes
259
Rating
4.4
P
Printableschmeee

Hair Band

Just a simple flexible hair band for little girls. Print it with as much perimeters as possible and with solid infil. If you have any issues with delamination while banding, I would suggest to print it with a slightly higher temerature as…

Downloads
1,921
Likes
156
Rating
4.9
P
Printablessideeffect001

Dragon Egg Coin Bank

I hollowed out my dragon egg: https://www.printables.com/model/365443-dragon-egg and added a coin slot. The two halves fit together with a press fit. The whole thing should scale okay if you want to print it larger or smaller than I did.…

Downloads
1,902
Likes
305
Rating
4.25
P
PrintablesDohara

Stitch Piggy Bank W/ Screw Top Head

200 mm (7.5 in) Tall Stitch coin bank with screw top head Use slim tree supports, especially on the head. I made the coin slot 30mm X 5 mm. This made it big enough to take a US Dollar coin. I have Uploaded the (container) body and the…

Downloads
1,879
Likes
304
Rating
4.83
P
PrintablesIFF

Super Mario Piggy bank /Money Bank

[升级内容] - 适当地扩大了装饰件开槽,更便于粘贴 - 增加底部槽位,以安装防滑贴 - 扩大磁铁槽位,更便于塞入磁铁 - 磁铁开槽处增加线槽,抑制材料收缩+胶水导流 [Upgrade content] - Appropriate expansion of the decorative pieces slotted, more convenient to paste - Add bottom slot to install rubber-foot - Expand the…

Downloads
1,871
Likes
330
Rating
5
P
PrintablesSevro

Banana for scale

Overview Banana that you can use to show scale of other objects. Print Model on photos printed with 0,4 mm nozzle, 0,3 layer height. Print it on it side with support Update v 1.1 Rounded tip Have fun

Downloads
1,871
Likes
706
Rating
4.91
P
PrintablesVisthum

Rubber band Bow - Toothpick + Cotton swab

Easy to print Rubber band toothpick bow You can use any toothpicks up to 2.7mm diameter (The barrel hole is 2.8mm). Recommended rubber band dimensions = (1.5mm thick - 50mm diameter). Even larger or smaller rubber band works. There's 4…

Downloads
1,855
Likes
466
Rating
4.9
P
PrintablesThomas

Headrest for Thule Urban Stroller

The THULE URBAN is a jogger pram and the child lies more in the pram than sits. If you also use the carrycot for leisurely excursions and want the child to enjoy the view, you may occasionally want the child to be able to sit nicely…

Downloads
1,847
Likes
88
Rating
4.82
P
Printablestexruska

Dinosaur Piggy Bank

This is a happy dinosaur piggy bank. His tail is removable so that you can access your coins – and it can only go back on one way The coin slot is 37x3.5mm, which should fit almost any coin from any country Thanks to @BMoArtist for…

Downloads
1,832
Likes
343
Rating
5
P
PrintablesAgustin Arroyo

Piggy Bank - Filla Fella

Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Piggy Bank Filla Fella. Download the original…

Downloads
1,816
Likes
258
Rating
4.84

Storm Trooper Piggy Bank

A Storm Trooper piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw

Downloads
1,800
Likes
332
Rating
4.92