Search results: band

Sort order

4,659 models

P
PrintablesThisfact

Rubber Band Gun (Print-In-Place)

Rubber band gun thing: Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger. UPDATES : Feb…

Downloads
29,966
Likes
3,788
Rating
4.55
P
PrintablesBrawlybanana327

Rubber Band Plane

Instructions: Print flat on build plate at 0.2mm. No supports/brims needed Let build plate cool sufficiently before removing from bed. To assemble: Flip it so that the protrusions face down Bend the vertical stabilizers up 3. Adjust the…

Downloads
15,844
Likes
2,490
Rating
4
P
PrintablesTeachingTech

Simple Z banding/wobble test tower

Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…

Downloads
15,405
Likes
660
Rating
4.95
P
PrintablesJallim

Rubberband Submarine - Print in place

Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…

Downloads
10,240
Likes
3,912
Rating
3.91
P
PrintablesMyuto
18+

The source marked this model as adult content.

Downloads
9,204
Likes
2,378
Rating
4.44
P
PrintablesFADesigns

Mag Fed Rubber Band Gun_2

***OUTDATED VERSION*** Find the new model here: This is an update to the Mag Fed Mini Rubber Band Gun. I have redesigned four parts to stop the back hook from jamming when pulling back the slide. The parts changed are the Grip, Insert,…

Downloads
6,768
Likes
3,466
Rating
4.08
P
PrintablesMicah T

Fun Rubber Band Glider ≈4g

This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…

Downloads
5,193
Likes
881
Rating
4.4
P
PrintablesEJTH

Rubber Band Gun MKII - No assembly required!

Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…

Downloads
5,118
Likes
373
Rating
4.58
P
Printableseof

Side Protection for Electrical Insulating Tape /Seitenschutz für Isolierband

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…

Downloads
4,996
Likes
2,863
Rating
4.79
P
PrintablesFADesigns

Mag Fed Mini Rubber Band Gun

***OUTDATED VERSION*** Find the new model here: I have spent a few years iterating this project. Finally it is fairly simple and reliable. This rubber band gun shoots bands from a MAGAZINE. It uses small “rainbow loom” bands, which allows…

Downloads
4,951
Likes
2,596
Rating
4.5
P
PrintablesHexiBase

HexiBox Series: Dayton TCP115-4 7th Order Bandpass Subwoofer

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
4,663
Likes
670
Rating
5
P
PrintablesTech Tastic

Quick Rubber Band Gun

A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…

Downloads
4,210
Likes
255
Rating
4.68
P
Printablesuhltimate
18+

The source marked this model as adult content.

Downloads
4,161
Likes
1,056
Rating
4.87
P
PrintablesTCCINTHEHOUSE

Band Aid Case

Tired of asking for a Band Aid on the go? This portable Band Aid case holds up to 5 Band Aids! This case can be thrown into a purse, backpack, pocket, or pouch. This case takes some assembly. Assembly guide: Requires Super Glue. *Printing…

Downloads
4,066
Likes
1,593
Rating
4.79
P
PrintablesFlyAttack

Princess Peach Tiara Costume – Crown, headband, broach and earrings

A smaller-scale princess peach costume parts. Print as lightweight as possible to keep from sliding around on the head. I'd recommend 1 perimeter and low infill %. Designed in mind without needing support. All that's needed to complete is…

Downloads
3,842
Likes
763
Rating
4.94
P
Printablesoks_amigos

Regular Headband

Need a headband? You're in luck here's one. There's also an f3d file available for an easier remix! Note: Print from the side you can see has a chamfer on it's teeth facing downwards!

Downloads
3,746
Likes
258
Rating
4.9
P
Printablessamsuchin

Rubber Band Powered Plane

This Rubber Band Powered Paper Plane will soar through the air, perform awesome stunts and more! An awesome toy for the Great Outdoors and even inside! (with caution) Materials: THIS Paper Airplane (…

Downloads
3,629
Likes
474
Rating
4.25
P
Printablesateldsign

Band Clamp Corners

Simple strap clamp corners for miter joints, framing, drawers or box making. Print twice to make one corner clamp. The two halves can be glued. Dimensioned for 25mm (1 inch) bands, easy to scale to any other width.

Downloads
3,545
Likes
2,054
Rating
4.97
P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Downloads
3,326
Likes
365
Rating
4.94
P
PrintablesWilko_SLO

Rubber Band Eagle Airplane

Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…

Downloads
3,177
Likes
393
Rating
4.4
P
Printablesivan

Headband

Simple headband. Works great in PLA, didn't test any other materials.

Downloads
3,171
Likes
160
Rating
4.79
P
PrintablesSalaman

Rubber band plane Vol.2

The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…

Downloads
3,156
Likes
666
Rating
4.59
P
PrintablesNikoFly

Unicorn headband

unicorn headband for the delight of little girls

Downloads
3,122
Likes
392
Rating
4.88
P
PrintablesComrade 3D

Boxing Hand Wraps / Bandage Roller

I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…

Downloads
3,100
Likes
282
Rating
4.69
P
PrintablesTwotone74

7 Segment Mechanical Counter, Version 3.0 NO-RUBBER-BAND-MOD

UPDATE 12/2025 As some users reported that the springs become weak after a while, I reinforced them. I didn't test them so far, as my original version still works fine. But I hope, this improves the model and I'm looking forward for your…

Downloads
3,062
Likes
1,045
Rating
4.72
P
PrintablesSanford Prime

Semi-Auto Rubber Band Gun - Fully Printed

A dive into the past, we all had one in our younger years... well most of us anyways. You'd be lucky to find one in between all the NERF guns in the isles today. I was having trouble finding one, so it was time to hop on CAD and make my…

Downloads
3,039
Likes
325
Rating
4.83
P
PrintablesYuval

Compact Rubberband Spiderman Shooter (Web Shooter Style)

print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best

Downloads
2,989
Likes
266
Rating
3.86
P
PrintablesBen

Apple Watch Strap /Band Holder - Large

A tray to hold up to 6x Large apple watch bands Will hold an apple watch band ~ 145 mm long and up to 9mm thick (Will fit the Small/Large Silicone band, the Sports Loop, and the small version of Leather Loop band - check dimensions for…

Downloads
2,987
Likes
484
Rating
4.95
P
PrintablesRaybo

Just a hair band.

Just a simple hair band with “teeth”. I printed a bunch for my wife, in multiple colors. I used PETG and 0.2mm height with enough perimeters to have them print solid.

Downloads
2,835
Likes
353
Rating
4.95
P
PrintablesJMAW

Serious Edge Banding Trimmer (cheap utility knife blades)

This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…

Downloads
2,812
Likes
510
Rating
4.91
P
PrintablesMartin_au

Rubber band plane

An attempt to make a rubber band powered plane. Easy and quick print. Doesn't fly well though. It might need a lot more thrust. I hope some of the ideas are useful to others. To assemble, run a rubber band through the prop, insert the…

Downloads
2,689
Likes
348
Rating
3.4
P
PrintablesTHE MOC CHANNEL
18+

The source marked this model as adult content.

Downloads
2,657
Likes
1,381
Rating
5
P
PrintablesLanzDesign

VasePlane V2 - Vase Mode Glider with Rubber Band Launch System

This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…

Downloads
2,416
Likes
336
Rating
4.86
P
PrintablesKadows

HairSnaps, The Modular Hairband!

HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…

Downloads
2,369
Likes
917
Rating
4.85
P
PrintablesCapra-Audio

Capra Headband V3

Now much stronger and reliable with optional folding! NOTE: if you bought the kit it does not include the parts to make the folding version! Static only! Something to note: If you are not printing your PETG hot enough then the adjustment…

Downloads
2,340
Likes
207
Rating
5
P
PrintablesPuhsketti

Flying surprise butterfly toy powered by rubber band

UPDATED to V4. Combined fuselage and hub into one part so glue is no longer required. Simply twist the rotor into a propeller shape using a lighter or hot water then insert the rotor into the fuselage. I recommend using size #8 rubber…

Downloads
2,269
Likes
233
Rating
4.86
P
Printablesnilok

NIH Surgical Mask Tension Release Band - Ear Savers

This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…

Downloads
2,259
Likes
222
Rating
4.85
P
PrintablesBig Nuts 700

Tic Tac Gun V2 Rubber Band Edition without text

I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…

Downloads
2,139
Likes
379
Rating
4.81
P
PrintablesRobagon3D

Pony Ears with Unicorn Horn Headband Costume

Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…

Downloads
2,124
Likes
299
Rating
4.71
P
PrintablesMZ4250

Bandit Updated

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
2,118
Likes
110
Rating
5
P
PrintablesVpslodya

More durable spring attachment for no rubberband OTF

The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.

Downloads
2,118
Likes
258
Rating
4.67
P
Printablesmanmac

Horns on hairband

Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA…

Downloads
2,083
Likes
565
Rating
4.89
P
PrintablesAlberta3D

Test cylinder - Z banding test

A simple test cylinder, good print to show how consistent or not your Z-axis is. the Base is 2mm thick so you can measure if your z-offset is correct. The cylinder is 100mm so you can measure for your Z-axis e-steps. Base is 40mm x 40mm…

Downloads
2,068
Likes
51
Rating
5
P

Unicorn headband

Diameter 120 mm, you can scale up to larger sizes.

Downloads
2,041
Likes
242
Rating
4.89
P
PrintablesJackson

Rubber band gun, 6 shots.

rubber band gun. 6 shots.

Downloads
1,996
Likes
531
Rating
1
P
Printableszedb13

Shrek Headband

Made these for a Shrek rave I went to Made with Vanilla White Prusament and painted green Needs supports because the ears are wider than the headband

Downloads
1,960
Likes
240
Rating
5
P
PrintablesMechaRaptor

Rubberband Butterfly

This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…

Downloads
1,924
Likes
259
Rating
4.4
P
Printableschmeee

Hair Band

Just a simple flexible hair band for little girls. Print it with as much perimeters as possible and with solid infil. If you have any issues with delamination while banding, I would suggest to print it with a slightly higher temerature as…

Downloads
1,921
Likes
156
Rating
4.9
P
PrintablesVisthum

Rubber band Bow - Toothpick + Cotton swab

Easy to print Rubber band toothpick bow You can use any toothpicks up to 2.7mm diameter (The barrel hole is 2.8mm). Recommended rubber band dimensions = (1.5mm thick - 50mm diameter). Even larger or smaller rubber band works. There's 4…

Downloads
1,855
Likes
466
Rating
4.9
P
PrintablesLoboCNC

Gooseneck Glider (Rubber Band Launch)

After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…

Downloads
1,764
Likes
174
Rating
5
P
PrintablesAqua

Rubber band pistol

Everithing is 0,3. only wheel is 0,10(not important) and screw is 0,20. When printing barrel use 60% infill for barrel and straight pattern. Barrel can bend on pressure. Added bolt with smaller radius to fit better.

Downloads
1,755
Likes
348
Rating
4.85
P
PrintablesSebastian

Rubber band gun (6 shots)

Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…

Downloads
1,701
Likes
395
Rating
4.89
P
PrintablesPeliX3D

Tiny Rubber Band Gun V2 (print in place)

I changed all of the tolerances to make the print easier. I've also made the trigger thicker to be more stable!

Downloads
1,700
Likes
75
Rating
2.5
P
PrintablesJH3D

Apple Watch Band Display Case

UPDATE: Check out my new and improved version here . I designed this display case to hold and showcase nine Apple Watch bands at a time. It is designed to fit most band types and lengths, though there are many first party and third party…

Downloads
1,693
Likes
428
Rating
5
P
Printables3D_print_de

Astro a50 Headband Clip (4. Gen)

0,15mm Layer height I've printed mine in PETG

Downloads
1,685
Likes
31
Rating
5
P
PrintablesSerializedSeven

Mickey Ears Headband Holder

This holder should hold about 6 Mickey/Minnie ear headbands. You print two of each part (the rails and the end caps) and assemble with a drop of superglue. (Or press fit if you want to be able to take them apart for storage.) No supports…

Downloads
1,678
Likes
269
Rating
4.89
P
PrintablesAncillary

Pimax Dream Air x Apple Vision Pro Dual Knit Band Adapter

(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…

Downloads
1,617
Likes
41
Rating
5
P
PrintablesHexiBase

HexiBox Series: Tang Band W5-1138SMF / Dayton Audio DMA80-8 2.1 Backpack Speaker

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,576
Likes
244
Rating
0
P
PrintablesHexiBase

HexiBox Series: Tang Band W3-1876S MicroSub

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,575
Likes
191
Rating
4.83
P
Printablesmajstor
Downloads
1,568
Likes
28
Rating
0
P
Printablesjju182

Astro A50 Headband Fix

I had the problem with my Astro A50 that the headband cushion always flipt out because of my big head. so I made a clamb for fixing. Tested with Astro A50 Gen. 4 and Mod Kit filament used: black PETG with 50% Inflill (same as full)

Downloads
1,567
Likes
36
Rating
5
P
Printablestoddanglin

MagicBand+ Charging Tower

Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…

Downloads
1,559
Likes
163
Rating
4.8
P
Printablesuhltimate

Underwater Torpedo with Toroidal Propellers and Rubber Band Motor

Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…

Downloads
1,552
Likes
470
Rating
4.8
P
PrintablesTallat Mehmood

Pajama Waistband & Drawstring Threader Tool

Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.…

Downloads
1,529
Likes
690
Rating
5
P
PrintablesPrintaUser

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

Downloads
1,519
Likes
193
Rating
4.64
P
Printablespeter m

Headband Europa V3 (For A4 format)

This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…

Downloads
1,516
Likes
6
Rating
4.8
P
Printabless0mple

Lever Action rubber band gun

2/28/21 update Just updated the instructions file to fix a typo and try to keep people from attaching the stock upside down This is a lever action rubber band gun that fires size-19, 1/16 rubber bands. Check the instructions.pdf file for…

Downloads
1,490
Likes
238
Rating
4.67
P
PrintablesProject18

Small Rubber Band Powered Plane

Disclaimer: This is not an easy plane to build, and I didn’t get it fully working. Use this as inspiration only or as a basis for a new design This is a small rubber band powered airplane that uses very little filament and can be printed…

Downloads
1,489
Likes
228
Rating
5
P

Stitch Headband

Step into the world of Lilo & Stitch with this original 3D printable headband inspired by everyone’s favorite alien, Stitch! The model is designed for easy printing on standard FDM printers and offers a comfortable fit. The ears are…

Downloads
1,478
Likes
465
Rating
4.86
P
PrintablesKleptocrat

Hair band

I have been using a store bought hair band but I have already broken 4 of them. Decided to model a similar one myself since I liked the design. Recommend printing with petg since pla deforms more easily but it works also. The part is a…

Downloads
1,451
Likes
173
Rating
4.5
P
Printablesdressyspider

Disney Interchangeable Headband and Ears

I am reuploading this so others can find it on Printables. All pictures on this model are the ones that I personally printed. I have also made a slightly larger version of the headband as the original was too tight for my head. You can…

Downloads
1,447
Likes
463
Rating
4.67
P
PrintablesYvrogne

Gabby Dollhouse / Cat Noir ear band

Gabby Dollhouse / Black Cat ears band for children, fit perfectly for my 6 years old daughter

Downloads
1,420
Likes
170
Rating
4.95
P
PrintablesBrite Minis

Bandit with sword 28mm (no supports needed)

A bandit with sword and shield. Could be a soldier, too. Or a mercenary. Or a deserter. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are…

Downloads
1,409
Likes
124
Rating
5
P
Printablespeter m

Headband Brasil (V3)

This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…

Downloads
1,405
Likes
5
Rating
0
P
PrintablesEngineer4Fun

Sims plumbob headband clip. Lightweight, sturdy and easy to print.

Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…

Downloads
1,383
Likes
222
Rating
5
P
PrintablesMZ4250

Lizardfolk Bandit Captain

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,361
Likes
121
Rating
5
P
PrintablesPlaste-Metz

Mini 13 - Headband

This is a headband for the MINI 13 of Soozafone : Fits perfect and makes your Mini 13 looks very stylish without much filament and time. ____________________ Print settings: Nozzle: 0.4mm Resolution: 0.16mm Support: no Filament: PLA print…

Downloads
1,355
Likes
244
Rating
5
P
PrintablesBosondehiggs

charging stand dock mi band 8

I modified a version for the miband 7 found here but the author remove is design so i can't create a remix. Layer height 0.15mm for the bottom and 0.3mm for the top. Nozzle 0.6mm. Pla no support.

Downloads
1,339
Likes
93
Rating
5
P
PrintablesMyuto
18+

The source marked this model as adult content.

Downloads
1,333
Likes
640
Rating
4.67
P
PrintablesDieHard

Airbus A380 slingshot glider (Only need one elastic band!)

Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…

Downloads
1,329
Likes
211
Rating
4.5
P
Printablesshawly

Replacement Headband for Razer Kraken X

This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…

Downloads
1,323
Likes
46
Rating
4.33
P
PrintablesAinon3Dtisk

New Year 2026 Headband, čelenka nový rok

Hello, Today I have a New Year's Headband for you 2026 . A great accessory for a New Year's party. Suitable for group photos. I used ASA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…

Downloads
1,322
Likes
102
Rating
4.8
P
PrintablesDR2D

Rubber Band Gun - with Selectable Semi- or Full Auto- Mode

Introduction This rubber band gun is based on the clever trigger mechanism used in “M1911 Rubber band gun” (https://www.thingiverse.com/thing: 3053501) and “MINI rubber band pistol” (https://www.thingiverse.com/thing:2740883). The goal…

Downloads
1,322
Likes
134
Rating
4.83
P
PrintablesRandomHacks

Adhesive bandage - Band-aid portable container

This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…

Downloads
1,319
Likes
597
Rating
5
P
Printablesilikeapples12

z-banding test

100mm tall z-banding test

Downloads
1,316
Likes
37
Rating
4.93
P
PrintablesIbrahem Zrine

Rubber band paper plane launcher

External parts/equipments: Rope (about 30 cm of rope - diameter 1-4 mm) rubber-band (you can add as much as you like but it would be so much hard to pull). Tape(recommended) (this would be to put in in the paper plane rear part for best…

Downloads
1,312
Likes
542
Rating
5
P
Printablesp3rr1ff3ry

Reindeer Antlers Headband

Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…

Downloads
1,304
Likes
221
Rating
5
P
PrintablesDirac Arts

Rubber Band Powered Glider

I updated all files that were in giant dimensions and reduced the size of the wings a little to better frame Use 100% filling with some hard material and with thin layers, as this model has small and precise parts that fit together, after…

Downloads
1,302
Likes
136
Rating
0
P
PrintablesMirkoFerronato

2026 Headband – Festive 3D Hair Accessory for the New Year

Ring in the New Year with this bold and stylish 2026 headband ! Designed to be lightweight, comfortable, and easy to print, this hair accessory is perfect for New Year’s Eve parties, events, or just showing off your excitement for the…

Downloads
1,293
Likes
75
Rating
4.86
P
PrintablesEighties8

Apple Vision Pro - Solo Knit Band Adapters for Meta Quest 3 (Version 4.0)

Fastest and simplest to print yet! This adapter allows you to use Apple's Vision Pro headbands on your Meta Quest 3. Don't have a printer? You can purchase a professionally printed version on the the official authorized ETSY store or the…

Downloads
1,286
Likes
66
Rating
5
P
PrintablesRayko

naruto headband

After printing, carefully heat with a hair dryer and bend to fit.

Downloads
1,261
Likes
157
Rating
5
P
PrintablesJohination

Xiaomi Mi Band 8 charging station / Xiaomi Mi Band 8 Ladestation

my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.2 - 0.28 Walls: 3 Infill: 10% Material: Brand: Kingroon Material: PLA Color: green printed on Artillery Sidewinder X1

Downloads
1,258
Likes
128
Rating
4.75
P
PrintablesTomo

devils horns headband

Use supports and glue the horns onto the headband. 50% infill.

Downloads
1,250
Likes
150
Rating
5
P
PrintablesMartin Duhayon

Beats Studio 3 Repair Headband Replacement Part

The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…

Downloads
1,246
Likes
129
Rating
5
P
PrintablesBogomips

Stronger beyerdynamic headband slider

I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…

Downloads
1,245
Likes
53
Rating
5
P
PrintablesDeifox

Rubberband gun target

3 knock down targets for rubber band guns. May also work for airsoft bb's, but the targets are designed to fall over with very little force. For best results, mount the base down or add weight to it to help keep it stationary. If you…

Downloads
1,218
Likes
196
Rating
4.92
P
PrintablesKarol-IT

Crash Bandicoot

This is a model of Playstation 1 style Crash Bandicoot

Downloads
1,208
Likes
73
Rating
0
P
PrintablesHex2000

Headband, Flowers and Bows

I was designing the flowers when this competition came up and I thought they would be great for a head band. My wife then suggested a Bow! Hope you enjoy. There are so many great colours in PLA now that the headband would look great on…

Downloads
1,172
Likes
172
Rating
5
P
PrintablesPeter Farell

Crash Bandicoot

Crash Bandicoot

Downloads
1,166
Likes
221
Rating
5
P
PrintablesMZ4250

Bandit Lord

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Downloads
1,152
Likes
84
Rating
4