858 models
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…
Legos are very high precision pieces which was a challenge to replicate. To get good results make sure your printer is perfectly square as any small deviation will cause the plate to warp when using with real legos. This model may take a…
Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each…
Replica of the baseplate of the Makita trimmer base 196613-4. As far as I can tell, it is not possible to buy the base plate as a separate replacement part, you have to buy the whole unit: Makita (German):…
A simple 12x12 plain and space baseplates compatible with LEGO. Inspired by classic space sets from the 80s. Perfect for displaying micro-scale models and Minifigures. Printed with 0.20 layer height. Do you want a more detailed print? Try…
UPDATE: I created a new and improved version of this model that nests and allows for multi-stacking. It's better than this one in every way - I recommend using it instead. Link to updated version:…
Wanted to make some baseplates for my kids... used the scad model from https://www.thingiverse.com/thing:615256/files to get the size I wanted… Made the base a little thicker to stand up to the stresses of 2 toddlers(hopefully) Pieces fit…
Motivation I recently purchased a P2 Laser Cutter and Riser. One of the first cuts I needed to make was on a long piece of ¼” acrylic to be used as a window insert to which I would attach the exhaust duct from my inline fan. I currently…
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
This is a remix from Doupem on Thingiverse https://www.thingiverse.com/thing:3545704
The added slots align with the LCD screen mounting points, on the right hand side of an Elegoo Neptune 3 pro printer and allow the height of the baseplate to be adjusted vertically. The original M3 bolts were used to secure the frame in…
I am a fan of Lego minifigs, but not really a fan of the 4 stud baseplates traditionally used to stand minifigs on for display. So, to remedy this, I created a baseplate, but with 2 studs instead of the ‘traditional’ 4. Also, I have…
Included STEP file for making it larger or adjusting the magnet holes. Uses 6x2mm magnets (same as other gridfinity) and is compatible with all gridfinity models. I've Used this on my ender 3 pro and also v2.
Gridfinity is a highly adaptable modular system designed to organize tools, parts, and small items. Here are the key components you can 3D print: Gridfinity Bins Modular storage containers designed to snap securely onto Gridfinity…
This is a Lego compatible Baseplate for Star Wars Minifigures. It's 3D printed in PLA. No support needed.
These are 1x2 gridfinity baseplates. There is one flat one and the rest are at angles, in 5º increments up to 20º. This can help accommodate a leaning surface, or it can point the gridfinity module at an angle. For example, this lets…
This is a custom-designed lightweight Gridfinity baseplate optimized for the IKEA NORDEN table drawer. The set includes two baseplates per drawer, each featuring a 3x4 Gridfinity layout. These baseplates were built using the Autodesk…
This is a Lego compatible Baseplate for Star Wars Minifigures. It's magnetic. It's 3D printed in PLA. No support needed.
Python code to create custom Gcode for Gridfinity baseplates of any size or tolerance. Home manually before print.
Custom Baseplate for the xTool F1 laser to center an original 20w EU-Apple charging plug.
I loved the Lego Marvels Season 1 minifigs with the addition of a small plate and clear piece to simulate flying / hovering / action poses, but when trying to display these minifigs, especially in the Lego Minifigs Hexagons by…
This is a replacement plate to replace the shown steering bar holder with this mounting plate incl. GoPro-Mount. If you have not the aluminium mounting blocks, try this one:…
I've gotten these classic drawer organizers second hand. They're were made by Arko Mils and there's a decent amount of them in the resale market. They're nice, semi-portable parts holders but they've proven to be slightly a bit too big…
This design adds a bottom plate and then a 1 inch air gap up to the PanaVise 301 base's bottom, aka the PanaVise Model 300 Standard Base. This gap allows for clamps to be positioned under the PanaVise rather than beside it. This means the…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 I’m a big fan of Gridfinity and magnets but the crazy filament cost to print the weighted baseplates to…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
If you get value from my work, consider supporting me at stu142.com/supportme These Gridfinity baseplates are stacked and oriented so that you can print multiple at a time with no support. The baseplates easily break apart after printing.…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Frame: https://a360.co/38FBsJz Weighted Plate: https://a360.co/3uCJ2gR…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
PLEASE GIVE THE MODEL A LIKE This is a parametric Gridfinity Base plate that is a full rebuild based on Zack Friedmans original designs. It has Parameters for the width and depth of the drawer as well as how many gridfinity squares in X…
Gridfinity baseplates completely remodelled from scratch, designed to minimise print time. Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Sizes 1x2 to 5x5.
Gridfinity base plates with adapters to lock to honeycomb wall. Be aware of weight of load of lager baseplates. This project is based on https://gridfinity.xyz/ If you want to support me, please buy me some filament .
This is a remix of the gridfinity baseplates by josh.hall - https://bit.ly/JHGridfinityBaseplates who did an awesome job with his version of the baseplates. Versions The modular baseplates come in two versions: Baseplates that can attach…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of his baseplate . There are already many great remixes of this baseplate out there (e.g. Gridfinity Screw Together baseplate ), but I could not…
You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt. The Grid is 14x10 and up to 8 height on the smaller drawer and…
When stacking several bins on top of each other it can be a bit tedious to access the lower bins. Especially when you place the bins in a box like in my IKEA Samla Gridfinity series (…
Gridfinity baseplate for Makita MakPac Support needed (Someone printed it upsidedown and it worked but I didn't try) It does not fit in the MakPac type 4 (sorry el_flexos ). I'll try to create a new version for it. Makpac Case Type 1…
Automatically generate Gridfinity templates of any size in FreeCAD , the free and open source parametric modelling software available to anyone at no cost. Check www.freecad.org . The models correctly implement all features included in…
Wanted a thicc cowboy Fred the frog but with a baseplate so I remixed it. I printed it on a Bambu Lab P1P with 0.4mm nozzle, 0.12mm layer height and auto tree supports for the hat.
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
18.08.23 Update: I have added a v2 with slightly optimized filament usage and 2 more screw holes (to make it easier to screw down in different locations if need be). My design for a lightweight, filament-efficient version of a 5x5…
This model is compatible with the lego system.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.
This is just a set of @kennetek_364826 's openSCAD thin baseplates to fill up and Ikea Alex drawer and fit on the build plate of an Ankermake M5. The picture shows regular thin baseplates (5x3, 5x4, 3x4, 3x3) in red and the backfills…
Pey's design does not fit my drawers well and requires severe modifications to make them fit after printing. I had to saw more than 3mm off the back and sand around 1.5mm from the sides. I wanted to do quite a few drawers so this was a…
Tired of gloopy overhangs? Need to mount gridfinity organizers on an IKEA skadis pegboard? Welp, here it is! Remixed @glitchprinter's 2x4 baseplate with four ikea skadis universal mounts. --- Parts used in this remix Magnetic Frame - 2x4…
I made this F3D file very easy to mod for the press fit of the magnets. If you go into the sketches folder and open the ( Magnet Holes ) sketch you can adjust the hole size to best fit the press fit for your press fit needs.
Gridfinity baseplate for the Ikea Råskog utility cart. This is a recreation of Zack Freedman's gridfinity system. Update 18/07/2023 Box for the corners Print Settings Printer: Anycubic Vyper Rafts: No Supports: No Infill: 10 Filament:…
Gridfinity baseplates with slightly smaller (6.5mm -→ 6.09mm) magnet holes. I use this jig and a hammer to add the magnets. No need to wait for glue, and you can poke the magnets out from the other side to recover the magnets when done!
Mounting for Voidstar Labs' Gridfinity containers on pegboards without wiggle? Heck yeah! This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…
This is a baseplate for the Gridfinity modular storage system by Zack Freedman that fits in a L-Boxx Mini organizer box. It's based on the L-Boxx Mini inner volume model that can be used to make custom L-Boxx Mini inlays that fit…
My custom baseplate and my re-made hexagon together. For people like me who ran out of baseplates and who have more minifigs to put up.
V1 - untested - 2x3 and 1x2 Gridfinity Baseplates adapted to Multiboard system - untested - tested: 2x4 Printed in clear resin it fit too loosely into the Multiboard octagon tile, but with a bit of glue it now holds a 600g bluetooth…
This is the original Zack Freedman gridfinity baseplate design. I did NOT create this design, I am only reuploading it as I was unable to find it on Printables. All credit to the original owner.
This model is based on the Gridfinity baseplates by Zack Freedman. You can find the original model here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925 I really like my version of the Gridfinity modular…
Gridfinity is configurable. How about a configurable baseplate? This is a snap together, reconfigurable baseplate for Gridfinity. You can print a bunch of 1X1 baseplates and a bunch of clips and then assemble them to whatever size…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
I couldn't print the original part with my printer, so i drew it up in Fusion 360, so that i could split it op into 4 parts. The original has holes for magnets, which i don't intent to use, so i didn't model them. If i'm needing som kind…
EDIT 2022.12.04: -added second file called separator. It is meant to easily separate the magnetic jig from magnets so you do not pull them out while the glue is not fully hardened. Usage: 1. Put jig into the separator 2. Put magnets on…
Intro I have tried a few Gridfinity magnet jigs, and most of them work well. But when I'm done gluing/pressing, where do I put the jig? I have somehow lost more of these jigs than I have printed! Why can't I store the jig in the very…
Voronoi deer with a simple baseplate. The base acts as a permanent brim and keeps the print from falling over while printing and while displaying. Printing Instructions (Standard): I used PLA with 0.2mm layer height, 10% infill, 3 walls,…
I made some thin baseplates that save a ton of time and filament. The models I have included are shelled out at 0.8mm. I have included a parametric file for Fusion 360 - you can make any size grid and change the shell thickness. If you…
Im introducing the baseplate for gridfinity system for BOSCH L-BOXX 136 boxes. I minimized the edges so I could fit as much grid as possible (7x9). It also contains space for 6x1mm magnets. The baseplate is designed to be glued to L-BOXX…
Based on the work of ZackFreedman .
This model is compatible with the lego system.
This fusion-design helps with the creation of perfect-fit baseplates with square corners. Given drawer dimensions, a baseplate is created with the maximum amount of Gridfinity-units, surrounded by a spacer. The baseplate is centered…
Why Walther doesn't make a polymer baseplate that fits into their magwells is truly beyond me. Their engineers likely could have modeled this in 1/4 of the time it took me and they already have injection mold tooling, but leave it to the…
These baseplates fit the Harbor Freight medium sized small-parts organizer ( this one ). I included two variants, the minimal baseplate and the skeletonized version with magnets. The magnet holes are sized for press-fit without needing…
Simple print that doesn’t change the way the magazine works except to add some more area to grip. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really…
just enough to hold the magnets. also the magnet pockets are 6mm instead of 6.5mm so the magnets press-fit into place
The 1x3 can be tiled horizontally! The others do not line up. I use a hammer and this jig to insert the magnets. Without glue, you can retrieve the magnets by poking them out through the bottom. Check out Sy's Peglock - Locking Pegboard…
Use the original screws and screw the baseplate to the back screwholes. All other files for the vise are available here: https://www.printables.com/model/281912-bench-mountable-4-jaw-3-jaw-2-jaw-vise-with-swapp
16 June Release: These are the baseplates for the popular Gridfinity Storage Solution. I have uploaded variations of the baseplate up to 5x5 which is the max that can be printed on the mk3 or mk4. 14 July Update: Added additional sizes…
This is a reimplementation of Zack Freedman's Gridfinity basic baseplates using FreeCAD ( RealThunder's fork ) instead of Fusion 360 / CadQuery. See this video for further information about the project:…
This model is compatible with the lego system.
This is a custom base plate for an extended CZ Shadow 2 magazine. This baseplate can be used with picatinny rail attachments. My case was to attach Mantis, so it can be used together with a holster. Print it vertically with support (back…
What Keeps your magnets aligned for superglue and installation. It's the logical counter-jig to this one for bins: https://www.printables.com/model/188559-gridfinity-magnet-glue-up-jig If your baseplate uses “press fit” style clearance, I…
Load the .3mf in Bambu Studio. Set flushing volumes to 800 both ways. Set flow for the interface material at 105% I used PETG and PLA Plus Note the modifier layer on either side of the "support" layers, this is to force the creation of…
Parametric (F3D) GridFinity baseplate with optional printable connecting clips. 6x2mm magnets can be press-fit into the model as per the remix source. Notes for changing parameters: When increasing the dimensions, make sure the slots have…
UPDATE: I now recommend to use Neels remix instead of this version. Printing separate connectors on their side and using them to connect baseplates works much better and has more flexibility then this design. There will be a stackable…
Added bridging supports at the intersections of Doug Kremer's EXTREMELY LIGHT Gridfinity Baseplate (Parametric). This fixes the drooping seen in the 3rd picture. For the Fusion360 file, change the size of the grid with: Update Row and…
So, you are like me and your Logitech G502 Hero and Lightspeed travels everywhere with you and you fear loosing the baseplate? Do not worry, luckily I still have mine and was able to model them, before they get lost. Now you can simply…
I don't use these anymore! I've switched to this model: Gridfinity - press-fit magnet light baseplates Gridfinity baseplates with magnet holes and no screw holes. Exported from fusion360 one model at a time.
This model is compatible with the lego system.
Try the generator on the official website or use the perplexinglabs generator which also supports other Gridfinity projects. GridFlock is a new Gridfinity baseplate generator that splits the baseplate into pieces that fit your printer,…
Standard, flat base plate for WE Glocks, no Glock logo, no extra features. STEP and STL included. Couldn't find the original but I manually retraced an STL file I had into a STEP and used it as a base for my designs.
This is inspired by Zack Freedman's weighted Gridfinity baseplates, but adds an external carry box with handle cutouts and puts the weight cavity on TOP. As with all my other Gridfinity models, this was designed using CadQuery instead of…
A remix of schneems design . This is for installing magnets into baseplates, for installing magnets into bins see this project instead. Two problems I ran into with the original design were glue getting on the jig separator where the…
This is inspired by Zack Freedman's weighted Gridfinity baseplates, but puts the weight cavity on TOP so that the model needs NO SUPPORTS to print. As with all my other Gridfinity models, this was designed using CadQuery instead of Fusion…
A gridfinity baseplate for Skadis
![Gridfinity baseplate [2x4] with Skadis Universal Hook mounts for IKEA pegboard](https://media.printables.com/media/prints/470819/images/3857666_7ac9f740-3494-4946-9ed0-4cf2565ed3cb/img_8401.jpeg)
