146 models
Easy-to-print Baseus Simple Wireless Charger mount meant for epic Honeycomb storage wall . I designed this accessory for Baseus Simple Wireless Charger (Updated Version) (exact model: BSWC-P10C ), but it should work for any round wireless…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
This is an accessory for the Asus ROG Ally that allows you to clip a Baseus 65W battery bank to the back of the console. Link to the battery bank: https://amzn.to/3JrHDR2 Note, this is an affiliate link so I make a kickback if you…
Mount with screwholes for Baseus GaN3 Pro 4 Ports Desktop Charger 100W. I needed a simple sleeve mount so I can put the Baseus charger under my desk, where I can still easily get it out and take it with me. There's 2 versions, one which…
This is a simple mounting adapter designed to mount a Baseus 65W Battery to the dbrand Steam Deck Killswitch case. The battery is fitted to the mount using a simple friction fit and the mount attaches to the Killswitch using dbrand's…
I don't like any patterns on the back as the dirt can get easily behind that so I have designed my model to be possible to print in PETG. There is a 0,6mm deep circle in the middle to accommodate a 0,4mm thin steel ring for Baseus…
I created a protective and carrying case for the Baseus 65W / 20000 model power bank Be careful to use it at high temperatures, since the power bank has a dissipating metal body it can heat up a lot in summer when it recharges quickly.…
Currently in my “desk space saving frenzy” phase, I designed these brackets to keep my Baseus 5 in 1 USB-C Hub out of the way while using my computer. These simple brackets keep it safely mounted onto any surface, regardless the…
Baseus USB C Ladegerät, 65W USB C Netzteil 4 Ports GaN Charger
My Baseus wxhw03-01 has a broken nut on the ball joint. So I created a new one. My version is rather thicker/stronger than the original.
Insert that fits into the deep part of the Rugged Pinecil XXL Case . It features mounts for a USB PD 65W 20Ah Battery from baseus and an Omnifixo. Model Link:…
I wanted something to keep my charger out of my desktop table. This is a mount to be screw under a table/desktop, it places the charger in angle so I can see better which port I'm gonna connect. Not very convinced about that, but I have…
I designed this dock for pixel 7 but it works great with iphone 15 pro that i tested. Hope you like it:) You can buy me a coffe if you want :) https://www.buymeacoffee.com/m12ukraineh
Cable clip for 22.5w 20000mAh baseus powerbank
Hello, everyone! I'm a maker that has recently gotten into guitars. I purchased the Positive Grid Spark amp for my guitar in December and joined the Positive Grid Spark Communities online. One of the more popular “mods” to the amp is to…
Modified the mount to support mounting of Baseus branded Magsafe charger, as the default mount is too small to fit.
This allows to dock the Steam Deck to a Baseus 6 in 1 PD USB-C hub.
This is Baseus 65w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made…
no supports needed 15% infill on standard settings for pla
Baseus power bank bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/7fbQGof 20000mAh 65W or another powerbank with max. size of 65 x 27 mm Happy printing!
Please comment, rate, and post a make! Be sure to check out my other models! This is a sleeved mount for the Baseus 100W PD GaN3 Fast Wall Charger Block . The mount is designed to pass the wall plug through the back. The positive stop on…
Baseus 65W GaN Charger mount https://s.click.aliexpress.com/e/_DDM7u8V
I had a wireless charger for my phone in the office. I didn't like having to leave my phone flat on the desk to charge, because I wanted to be able to leave it charging while seeing the screen. So I drew up the charger base around it.…
Holder for mounting the switch under the desk.
I created this model to hold my Baseus 65w GaN charger under my desk so I can charge my phone, power my soldering iron and an extraction fan. The charger prints without support and in the orientation you would have it under your desk.…
I wanted to have my Cordless Vacuum Cleaner handy around my printer, I didn’t find something ready that will work for my needs, so I used Tinkercad to get something done. Ikea Bror mountable Wall mountable Can be used as disk stand also…
I used PLA, infill 10-15%. I printed it with my FLSUN SR, I didn't need supports or plate adhesion help. Feel free to make other versions of it ;)
TPU printable “soft” shell case halves for “Baseus Portable Charger, 30,000mAh Power Bank 65W Battery Pack” There is a thin model(early?) and a thick model(late?). This is for the thicker brick shaped model. There are openings to access…
A remix from the original to fit the Baseus 20k 65w ‘Elf’, PPJL65C, so the powerbank with attached cable. This is considered a good option for the Steam Deck! The fit is good, does not fall of, like the original poster. I like it very…
Baseus 65W GaN holder with clamp I used a Formlabs Form 3 for printing - works with Grey resin and Tough2000
Baseus A3 stand. Baseus A2PRO Stand - this is copy of model created by @Feldbett_1095871 (see https://www.printables.com/model/581571-baseus-a2pro-stand) Baseus A3 Adapter - this is simple adapter which makes the original stand fit Baseus…
Baseus Wireless Airpods Case Keychain Clip. I am not a pro at 3D designing but it fit perfectly. I design it in sketchup and added the .skp file so feel free to remix it. Buy me a beer PayPal.Me/cagataykilinc Print Settings Printer Brand:…
I needed to place a Baseus soap dispenser somewhere, so I made this holder I drawed it on Onshape and printed it on my new MK3S
Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
I've designed a wall mount for the Baseus a3 lite vacuum cleaner. The mount can be easily attached to the wall using two screws. At the bottom, there's a hole that allows for a charging cable or can be used to secure the vacuum cleaner…
Holder for a car trash (from Baseus), that can be mounted e.g. on the side storage of the car. The first design (large) was meant to be printed in PLA or TPU, but it appeared to be too long, and the trash was crashing while closing the…
Simple bracket to mount BASEUS Lite Series USB HUB to desk, wall, ect. Just print two pieces without any supports and enjoy!
Printed: Prusament ASA Orange Prusa presets for ASA 10% infill Use Supports
Gridfinity 4x2 holder for Baseus 100W USB-C Charger (EURO plug) This model of charger has a EURO plug and a EURO socket at the top.…
how to print 3 models provided. The screw gaps have been calculated to match HSW's lattice. • vertical: device inserted from the top (recommended for a vertical wall mount) • horizontal: device inserted from a side • both/universal: holes…
Originally designed to carry battery as power source for FPV goggles or any other tool used in a field. There was a cable holder added for the time you don't use it. Clip 1 is used as a hook on a belt. Clip 2 may be used on any edge. Pin…
I have a thin Baseus 100W Power Bank that I want to mount into my bike's cargo basket. But it's a bit awkwardly shaped for mounting. Plus, I want to have a bit of rain protection, and hiding this expensive-looking bit of tech inside a…
A sleek way to always know where your powerbank is
The baseus 65W bricks with GAN are now everywhere, and for a reason. For roughly 20 bucks these just work and are incredible. I mounted 7 of these everywhere in the flat, to charge notebooks, Switch, Chromebook, phones, Steamdecks,…
DeckMate attachment for the Baseus 7-in-1 USB C hub. https://www.amazon.com/dp/B0C85759QD You will need the Deck_Mate_Mechanism_Top__Print_02.stl from DeckMate, along with springs .…
Baseus 65W/100W mount on IKEA LACK furniture, will need to use supports
The model is designed to fit the Baseus Adaman 2 power bank, but feel free to remix it! Anyone is welcome to edit or tweak the design to fit their own power bank model or improve some of the rough spots.
Funda protectora rígida diseñada a medida para la Baseus Blade HD (100W) . A diferencia de otras fundas, este diseño se centra en la comodidad de uso y facilidad de montaje. No necesitas tornillos, pegamento ni herramientas.…
A mount for 2 Baseus Power Banks with 65W 20000mAh What do you need : 4x Screws with 3mm Diameter And here is a link when you not have the Powerbank: Baseus Power Bank 65W 20000mAh
Oddly specific small vacuum holder for IKEA Trotten or any 20x20mm profile. Also holds the blower and brush accessories. There's a small slot to hold the charging cable when the vacuum is used (holder is open in the bottom, so you can…
video: https://youtu.be/bqL0IYLaP-Q Additional materials: 1 inch nylon strap 70cm 2 pieces of velcro 5cm each sawing method Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20…
Printed with .6mm nozzle.
Description Desk or table mount for Baseus 100W/65W charger. The mount consists of: Charger mount Desk mount TPU pad to prevent slipping Screw pad to protect the desk Two screws, with a 5.2mm insert Screw caps Screw pads from the bottom,…
IKEA Skadis mounting solution for portable vacuum cleaner with Attachment
I love listening to the cheap EZ10 earbud, but its design had a huge con for me from the start, the open charging case collected all the dirt from my pockets. Not anymore! I recommend slicing up the included STEP file, I printed mine with…
Baseus 65W charger holder for sticking to the wall, radiator, or any other place. You can easily remove the charger and take it with you on a trip, and after returning, put it back in the holder and enjoy the tidiness. Uchwyt ładowarki…
Keep your car emergency gear protected and organized! This is a custom-designed, heavy-duty storage case specifically engineered for the Baseus Car Jump Starter . If you're tired of the original soft bag or just want a more rugged…
Started as a remix, but ended up being a complete redesign. Needs M3 screws and M3 heated inserts in the bottom. Should fit any hole from 61mm to 69mm. Two options to mount. First put the charger in the base, screw the bottom on it. Then…
Support brackets for mounting the Baseus Desktop Charger under the desk. One of the two brackets has no locks and allows for mounting. You need to slide the charger into these brackets after screwing them to the desk.
This is a holder for the Baseus 65w 20Ah Powerbank on the IKEA Skadis pegboard. This holder has extra large cutouts, so the Powerbank could be inserted in both directions and the Cables and the Button are useable.
You might want to cut the head of the pipe. Apparently i miss measured something and it did not fit as I imagened. Added couple of metal weight at the bottom openings and glue the covers. Buy me a beer PayPal.Me/cagataykilinc Category:…
Soldering station for Baseus 65W charger and USB C powered soldering iron. Prints with no support Holder uses 608 bearing, M3 Nut and Bolt. (Would suggest 6900 bearing for TS80). M3 nut and screw Print vertically (as shown in the picture)
I bought this battery for my film equipment, and it's amazing. It is capable of multiple voltage outputs simultaniuosly. It can power my wireless mic reciever (5v), my camera, (7.5v) and my external monitor (12v) all at the same time.…
DBrand Killswitch Mount for Baseus 100W Portable Charger Easily mount your Baseus 100W portable charger to your Steam Deck using the Killswitch case. I wanted to make sure the screen was visible while in use so you can see how much…
Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…
Adaptor for using the Baseus I-Wok Monitor Light Bar on thin monitor adaptor. I'm using the HP 27es monitor which is thin on it's top edge (~7 mm). As the Light Bar needs a monitor thickness of 0.3"-0.8" (7.62-20.32 mm) to attach to, this…
Quickly designed a stand for my vacuum. Really tight fit. Could maybe be a bit shorter and the opening a bit wider but seems to work for now. Maybe I'd make it a bit wider and add some soft foam padding to the next iteration to avoid…
Used to print in PETG 15-20% infill 0.2 height
This is Baseus 100w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
A cupholder mount for the Nissan Qashqai and Baseus Qi charger. The included adhesive base will not stick to almost any material in the car cabin, as they are mostly oddly shaped, foamy faux leather type of a deal. This mount out of the…
Cable clip for Baseus 87w 2in1 Adapter & Power Bank
A mount for Baseus 65W USB-C charger inside a Niko blank faceplate. It's too large to fit in a standard wall outlet, but with some imagination it's still usable in other places. I've printed it with the front on the buildplate. You could…
A holder for the Baseus A2 Vacuum, which is a small and handy vacuum, to such up those small 3d printing debri. Base section has 2 mounting holdes. Top hole was made for an angular screwdriver, but I have provided a file for a regular…
This wall mount was entirely made with Prusa Slicer. It points downward to enable to set the the solar screen at a more appropriate angel compared to using the mount that comes with the camera. When using this angled mount, the camera can…
Simple stand that slides on to the Baseus 65w battery leveraging the weight of the battery to keep the stand in place. Helps reduce device and cord clutter while taking up minimal tabletop space making this ideal for an airplane or other…
When you buy a Baseus charger, all you get is a cardboard box and a thin extrusion inside. I thought I would like to have some sort of convenient box, so I made a box with a sliding closure. Supports In the case of my printer (Prusa MK4),…
This simple and practical wall mount is designed specifically for the Baseus A1 vacuum cleaner. It allows you to store your vacuum cleaner while keeping it easily accessible and securely. Material: tested with PETG, but it should also…
Mit PETG gedruckt. Die Bügel mit M3 Schrauben an die Halterung schrauben.
Remixed model from GunbleR to use with non-flexible filament.
Mounting for a Ø30mm pole, for BASEUS GaN3 Pro 100W How it was printed: - 0.2 layer print - minimum 3 strokes - 30% fill Print time on Prusa MK3S <9h If you managed to print it out - please leave a comment. Maybe you have some comments? :)
I remixed wonderfull holder made by mkingery by adding 15mm offset from the pegboard. That allowed to mount Baseus GamerX 6 Ports USB-C Steam Deck Docking Station behind the Steam Deck. With some cable mounts now I can easily rest Deck on…
Baseus A2PRO vacuum cleaner holder on the scadis board
Baseus usb-c Port Gap Spacer Print instructions Flexfill 98A Infill 20% Speed 40%
It's a pretty cool charger but doesn't come with a way to attach it under your desk - so I designed mount to do that using magnets :) Beware! Inserting the charger into the mount might leave some minor scratches that will become visible…
Vacuume cleaner head Holder
Holder for a Pixel 3 with case to line up the wireless charger element with the Baseus charger. Baseus Charger: http://s.click.aliexpress.com/e/eNnlXkJO Rev-B: Narrowed the outer walls to 2mm from 2.5mm Increased length slightly to give a…
Replacement cover for ec5 jump-starter plug on baseus jump starter. printed in hard TPU
. WTF？ ↓Cable binder for following USB Hub. U can make without any Support/Raft/Infill. Have Fun!! PS. zip file is a raw modeling 3dm file of 3D Builder. ￥4090.0 37% OFF|Baseus USB C HUB Type C HUB to HDMI USB 3.0 PD Port 3.5mm Jack…
You can print it with the text facing upwards for better quality (use brim if u have poor bed adhesion) or flat on its belly if u don't care about the text quality. I recommend taping it down with double sided tape . Happy printing !!
Модернизировал модель, под размеры 100 ватной версии
Mount for the baseus magnetic charger holder
Cable holder for Baseus ultrajoy 5-port hub with RJ45 model number: BS-OH158 Model relies solely on friction fit so a bit of scaling may be required. Printed in black esun ePLA on Kingroon KP3S.
The specific model is this one: https://baseusonline.com/product/79/baseus-circular-plastic-a-c-30w-pps-car-charger-black#item_358 Diameter is 2.5cm. Will likely work on the other 30W one that is dual USB A (which is why I didn't put in…
Just grab the legs on the back to adjust the angle. Tested on Bambu Lab P1S, Generic PETG, 0.4mm nozzle, 0.2mm height, 3 walls. Probably will print just fine with any settings. Designed to be used with baseus magnetic usb c adapter, you…
Not much to add. Print with high infill. I use PETG.
Upgrade your Baseus 65W Charger with this practical mod that adds a long cable, allowing you to conveniently charge your devices from a distance. Originally, the charger broke due to a weak point in that area, so I decided to repair it…
I needed to mount the hub below monitor, but above monitor stand. You can print one front and one back holder part or two back (standing) parts if you do not need to attach it to the shelf edge. If you need to modify this project it is…
I created this model based on hub usb c mount by @trucologie_69422 with only a screw 4.0 x 35 in my MDF desk. I use only one support. Printed in PLA in an Ender 3 V3 SE. Default settings (0.2mm Layer Heigth)
Not so elegant but useful thing for backpackers
I converted the light bar to be wirelessly controlled, so I designed a end cap to replace the capacitive touch control panel.
This is my own 2x1 Gridfinity bin to hold my 20.000mAh Baseus (65W PD version) powerbank in a vertical position. Printed with PLA on A1 Mini.
