240 models
Objective and eyepiece covers for the Zeiss Victory Pocket 8x25 binoculars. Print instructions Use PETG at the 0.10mm Detail setting, rotate 45º so the lines are parallel to the lens axis.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Replacement lens cap for Bushnell Citation Binoculars
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Toy Binoculars for Kids Coudln't find any good toy binoculars with eye spacing that worked for kids, so I made my own. I copied some aspects of a few different binocular designs I found out there. I modeled the support piece in already.…
The L3Harris Binocular Night Vision Device, also known by the military nomenclature AN/PVS-31A, is a compact, lightweight, Generation III high-performance white phosphor dual-tube goggle……But this thing is only a model, if you want to…
Documentation Updates Model Version Date Description 1.02 9/3/24 Added to the errata a workaround to close the gap between the right eyecup base and the adapter base. I realized this hole could allow dust to get on your lens. I'll close…
TD2.3 Electrobinoculars Production information Manufacturer Neuro-Saav Corporation Model TD2.3 Electrobinoculars Type Electrobinoculars Cost c. 100 credits Physical & Technical Specifications Length c. 0.25 meters Weight 0.7 kilograms…
Millimeter for millimeter a copy of the typical LEGO binocular accessory. One file is the 1:1 scale replica of the original. The second file is a 4.85:1 scale to fit my wooden articulated version of a LEGO minifig. Photos show it holding…
If you like what I do and want to support my work check out my Patreon!
This model is compatible with the lego system.
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
I needed some toy binoculars for a kids spy birthday. Also wanted the kids to actually be able to use them. This is rev 1, printing now, may have to adjust how far apart they are. Print instructions Category: Toys & Games Print Settings…
Parametric Heavy Duty Binocular Tripod Mount Re-mix of thistof's design to adapt mount for slightly conical barrels have the screw in the middle of the mounting arm Practical Tip: If you have binoculars with rubber armour, best add some…
Binoculars - dollhouse accessory
Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props
This model is compatible with the lego system.
Remixed from Thingiverse model by efrias and jnavarro1178 Lets you change the diameter to fit your binoculars using the customizer. Has nubs inside the holder for a smooth fit on soft lens border, as found on Orion Mini Giant binoculars…
Scale up as desired for a full size print! I printed theses at 600% with default 0.3m draft settings, easy print with some supports required
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
Binoculars for children. It is a toy for children aged about 3-4 years.
Here's my version of Kenobi's Binoculars that he used in the new Kenobi Trailer. Category: Props
A simple but good looking pair of Print-in-place binoculars with 2 styles for any figure within Soozafone's LUCKY 13 family. Print: 30mins max (highest quality) LUCKY 13 family: https://www.printables.com/@soozafone/collections/955062…
10-6-21 Added remix credit to Slangfil since his design is similar and earlier dated. Unintentional remiss on my part. 9-22-21 Added a smoothed version for little hands. Kids pretend binoculars using toilet paper rolls. 42mm diameter…
Ready to build your Magic? Download the files here and visit https://analogsky.co/magic-build for course access. Ready to make Magic? Download the files here and visit https://analogsky.co/magic-build for course access.
This model is compatible with the lego system.
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
WORK IN PROGRESS! BE SURE TO CHECK THE SCREW CLEARANCE ON THE PHONE MOUNT, SO IT DOESN'T SCRATCH THE BACK OF YOUR PHONE. I wanted to get the phone closer to the lens, It also makes the design simpler. I also edited the clamp for my…
Remix of ReProp's Kenobi Binoculars. I added a dial on top and on the right side, as well as a space for a blue LED, reshaped the front panel, and decreased the overall height. On my print, I have a small magnet under each dial to hold…
Universal binoculars adapter for smartphones
For some reason the linking function on Thingiverse is broken. This is a remix of L-Adapter II ( https://www.thingiverse.com/thing:1849725 ). I created a larger space for the 1/2" nut in the base since my nut wouldn't fit in the original…
I got a red dot finder with a telescope - don't even know what this mount is properly called though it seems common. Looks a lot like a "Celestron Star Pointer" but is not branded. It looks very similar to the "Orion EZ Finder II…
This is an adapter for quickly mounting classic style poro binoculars to Arca style tripod head. It works by clamping onto the center hinge axle, so it will only work with those that have the axle exposed. I have tested it with several…
A simple phone mount for binoculars or a telescope. Requires: 2x 60mm M5 screw 1x 20-30mm M5 screw
This mounting adapter was designed for mounting to a standard camera tripod. Note that this adapter requires that your binoculars have a central ¼"-20 threaded mounting hole (see photos). The angled adapter moves the balance point for…
Solar Filter for Binoculars 15x70 or 20x80 and 10x50 use with BAADER AstroSolar Safety Film (OD 5.0) Use a tap to create a thread for screw FreeCad source Category: DIY
Do you love Toy Story and Lenny the binoculars then you will love this 3d print file.
GoPro Adapter for Binoculars (Parametric) This is an adapter for having the GoPro film (coaxially, normally) through its own lens while mounted to the binoculars. It is not an adapter for shooting through the bincoular optics themselves!…
The slightly smaller 1/4" inch hole allows for a bolt with threadless shank (about 6mm of shank). Screw it through and it shouldn't unscrew but still rotate freely. The 3/8" hole is slightly larger and surrounding walls/space have been…
Hi, Shell for making 2x54 binoculars from two Nikon TC-E2 teleconverters. Use M5 socket cap screw with flat nut for the axis. I'm printing the eyecup with soft gum filament and 1% infill with 2 perimeters so it stays soft. Update: I've…
I wanted another prop to use with my Star Wars Rebel Legion Resistance Trooper costume for a Blaster-Free troop so I designed these Star Wars-ish looking binoculars. A bit of acrylic paint for weathering and a bit of leather attached with…
Hi, I've designed new, more comfortable eyecups for VisionKing 5x25 binoculars. There is also new cup to fit new eyecups. It's printed with soft gum filament with 1% infill for eyecups. Category: Physics & Astronomy
Ready to build your Sunny? Download the files here and visit https://analogsky.co/sunny-build for course access.
Lens caps for binoculars with lenses with a 54mm outer diameter. I designed these for the Nikon Prostaff 7S 10x42, but these will work with any binoculars with similar dimensions. Print in a flexible material.
Print out in something mechanically strong. You'll have to provide your own camera mounting screw of course, screw into the standard mounting screw most binoculars have in the front (you'll probably have to remove the cover first). You…
🏺 The Honest Shelf Series // Vol. 76 🏺 Meet Your New Desk Companion: The Peeping Planter ✨ A whimsical, character-driven pot designed to keep an eye on your productivity while cradling your favorite greenery. 🌿 If You are interested of my…
This thing is a quick-release (or snap-on) adapter to mount a Bushnell 12x25 foldable binocular to a standard quarter inch tripod mount. For a binocular with a 12x magnification it makes a huge difference to prevent it from shaking by…
this is an eyepiece for machinist pocket microscope, probably it fits various other equipment, scale it up as you like 1:1 scale drawing is on the photo so it is easily scalable within slicer software to match your needs, just do the…
I own a StarSense Explorer Dobsonian and wanted to be able to move the StarSense Smartphone Adapter over to my Celestron 15x70 Binoculars The original docking bracket is pretty much hard screwed onto the original Celestron Dobsonian and…
Opera Glasses. There are a few versions with and without stick, and with and with out stick cover. Made for my wife. Two versions one with a lower poly count.
Background An old coworker told me the adjustment ring for the binoculars eye piece, which helps with focusing, broke and asked if it was possible to 3D print a replacement. Apparently when he contacted Nikon if they had replacements, he…
3D Printer: PANDORA DXs - DIY Desktop 3D Printer Slicer: Cura 14.12.1 Layer height (mm): 0.1 Shell thickness (mm): 0.8 Bottom/Top thickness (mm): 0.8 Fill Density (%): 20 Print speed (mm/s): 60 Print temperature: 185 Bed temperature: 60…
Canon's 10x42 L IS WP binoculars are wonderful binoculars but the lens caps provided are terrible. They're difficult to put on and come off way too easily. They also come with a lanyard which is supposed to make them easily useable, but…
Astronomy red dot finder holder for big binoculars 20x80 (25x100) or similrar types Other componets: 7x M3 srcew 5x M3 nuts 1x Red Dot Finder Note: Use a tap to create a M3 thread in the dovetail For Binioular 15x70 see:…
Print two of each: Eyepiece cap is the smaller protector for the eye-side of the binoculars Objective cap is for the larger/final lens in the optical train I have added a small 4mm hole for attaching tethers so that THIS time I do not…
NATO/Picatinny Rail for Binoculars (Parametric) Mount NATO/Picatinny/Weaver compatible stuff on your binoculars (i. e. action cameras). Works with binoculars that have a 1/4" thread in the hinge. Print instructions Category: Camera…
These covers are sized at 47mm and 37.5mm I.D. to fit the large and small ends, respectively, of a set of vintage Bushnell binoculars where I had found the original plastic ones to have cracked due to age. The company logo is inscribed on…
Toy binoculars. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 0% Filament: Gembird PLA white Notes: I printed it in spiral mode with 3 bottom layers. Line width 0,6mm (0,4mm…
This tripod was designed to hold any cellphone, but could be used with a variety of items. The height of the tripod is controlled by the lengths of the various ½" PVC tubing that you decide to use. I preferred to make the rounded feet out…
Solar filter for binoculars with 42mm objective lenses. These work both on my Nikon Monarch HG 10x42 and Nikon Monarch 7 10x42 binoculars and will probably fit other similar sized binoculars. This solar filter fits nicely on the end of…
2 versions of a pillar style adaptor to mount Leupold BX-1 Mckenzie HD 12x50 binoculars to a tripod. one small base, one larger based and higher taper for stability. Both have a side loading nut trap in the bottom to take a ¼"-20 hex nut,…
I needed a piece to hold filter material for the upcoming eclipse. These were designed for 53mm diameter Leupold 10x42 binoculars. They are a nice press fit on those. They should fit anything that has the same size objective lens. They…
I made it to spec for Nikon binoculars' peep holes. They should be able to fit other brands and even the front lenses by scaling them to what you would need. They're made to stay on using the tension through the connection between the two…
Made this for my Celestron Nature DX ED 10x50mm roof binoculars. It was modeled to be similar to the Celestron Binocular Tripod Adapter (https://www.celestron.com/products/binocular-tripod-adapter) so it might fit Celestron’s other porro…
As there are only some crap covers for the eyepieces included I made my own protection for the SIG Zulu6 HDX Binos. Printed with TPU.
Astronomy right angle adapter for bigger binoculars (15x70 20x80) or similar types Componets: 2x Seagull Right Angle Finder or similar types 6x M3 screw Note: First, print the test ring to select the version according to the size of your…
I needed to replace a lens cap for my binoculars. I lost the small end cap on my Traq 7x35 set and decided to try and model one and print it out. After some trial and error I got the larger cap made. Both now available. I used black TPU…
An adapter that attaches a binocular to an iPhone 13 case. The 3D printed case is modelled for Apple's iPhone 13 Clear Case with MagSafe and the Canon's 18x50 IS All Weather . The blender files can obviously be modified to work for other…
I have a fairly elderly pair of binoculars that only had 3 lens covers - one had gone missing many years ago, and I finally decided that it was time to replace it. This is a simple design with just 4 parameters: the diameter of the lens…
Print in place lens cover for Vanguard ED 10x50 binoculars. Should probably work with other ~50mm binoculars. No flexible filament required. Print with PETG (tested with Prusa PETG) and use at least 5 perimeters to keep the hinge robust.…
This mount specifically fits the Swarovski binocular mentioned in the title. It is wider than the original model. It requires a 1/4 size 20 nut. I would suggest using PETG rather than PLA, it should handle the stress better over time…
I made this as I needed a very low-bulk case for some binoculars. This case fits my bushnell 10x42 binocs, similar to these: http://www.bushnell.com/Products/Binoculars/Trophy/Trophy-10x42/?sku=334210 . I've included a pic of my binocs in…
Adapter um ein Fernglas auf einem Fotostativ zu montieren. In die Sechseckige versenkung kommt eine ¼ Zoll Mutter.
Astronomy Red dot finder holder for bigger binoculars Celestron SkyMaster 15x70 or similrar types. Other componets: 2x M3 srcew 1x 3/8 Inch Female to 1/4 Inch Male Tripod Thread Reducer Adapter 1x Female 1/4 to Male 3/8 Convert Screw…
Perfect toy for any age! This model can be scaled! You can scale it down and use it as an accessory for a kid's toy or scale it up and use it for a kid to play with outdoors. This can also be a fun prop for any kind of performance! The…
Lens caps for binoculars with 48mm & 38mm outer diameter lenses. The 38mm cap is designed to be looped through a strap m
A binocular mount that fits a Focal tripod shoe. Printed in PETG with three perimeters for added strength. The print uses 15% infill from the base up to about where the washer makes contact (at 65 mm). From there up to the top I switched…
These lens covers cover the objective end of Nikon Prostaff 3S 10x42 binoculars, but they may be compatible with other 42mm binoculars. I got sick of having to put my lens covers in my pocket like a peasant. These covers just flip down…
Binocular Adaptor - iPhone 15 Pro Max - for Diamondback Vortex 10x32 Binoculars - Easiest to print this model as two seperate pieces and super-glue together. -Added a MERGED file which can be printed using supports, but I find it much…
Not a remix but inspired by http://www.thingiverse.com/thing:1008948 , this is an original design created in Onshape. The binocular clamp consists of three interlocking parts. The main post was designed to fit in the QS03 quick-release…
With the October 14, 2023 solar eclipse just around the corner, I was looking for solar eclipse binocular filter lenses. Prices were a bit much for just a single lens. I then came across Solar Filter Sheets that can be used to make your…
Uses 2x 25mm long M4 hex bolts and 4x 20mm long M3 hex bolts with matching lock nuts
Delta Optical Binocular Tripod adapter
Can of course be used on anything similar, including monoculars and telescopes. May not fit yours, but the model can be scaled to suit. These caps fit an eyepiece outer diameter of 33.6mm (1.322835in)
Style One is the most accurate, but not all the small details can be seen on print. Style 2 is a mixed style, but the details show up better.
For any binocular with 1/4"-20 female front mount. Designed for binoculars with up to 50 mm objectives. I use these with my Vortex Ranger HD R/T 10x50 binoculars. 2 lengths provided 80mm, 55 mm. The shorter one will fit in most binocular…
I have a pair of Lunt Sunocular binos that I picked up for the upcoming total solar eclipse. They work well, but lack the tripod mount screw-hole. I created this model as a solution. You will need: Some closed-cell foam, like from old…
Many monoculars and binoculars either don't come with lens caps or have caps that separate, making them easy to lose. This cap has a ring that goes over the eyepiece (or objective lens) that allows the cap to flip down without getting…
Binocular lens cover, Small Only
I needed binoculairs for a costume party but didn't want the weight of real ones hanging around my neck all evening.
Protective shell replacements for front and rear optics of ZEISS 7x40 NVA German military binoculars. Easy to print, no support. Shell is much more compact and sleek comparing to originals, designed for more intense practical use. No…
Impression sans support. Film spécial : Baader Planetarium AstroSolar Filtre solaire pour l'observation solaire 20 x 29 cm https://www.amazon.fr/dp/B002SYD2EM
Sig Sauer Zulu 5 (10x42mm) Binocular: Anti Reflection Device (ARD) aka Killflash, Binocular Cap and Shock Collar System
Zeiss Victory 10x25 binoculars are of high quality and light weight. So they are easy to carry in the pocket as such but the well engineered carrying case are the only available lens protection and it adds a lot of space and weight around…
Universal Binocular Tripod Mount (for roof prism glasses) Fully customizable version will follow as soon as I have cleaned up the OpenSCAD source code. Additionally required: 2 pcs 500 mm pieces of shock cord (ca. 5 mm strength) 4 pcs…
Printed with TPU. 70% Fill density. Printed with supports.
Here's a small little accessory for Cliffjumper as a homage to its appearance in the latest comics - his pair of binoculars! To allow him to be able to hold it, the main option for this piece comes with the 5mm peg. But, we've included…
Adjustable binocular holder for smartphone. Or adjustable smartphone holder for binoculars if you prefer. This first design I made should work for a large range of smartphone's size. Some metal hardware are required, I design the frame…
A hinged split ring clamp designed for binoculars that lack a built-in tripod adapter to be mounted on a standard Arca-Swiss tripod. Uses a draw latch for quick, study, and toolless clamping and release. Great for birding and astronomy.…
This is a very simple adapter that allows a Hero4 Session (GoPro) to be connected to the eyepiece on binoculars. The eyepiece adapter fits my Nikon Aculon 10x50 binoculars, which have an eyepiece diameter of 45.2mm (approx). I needed to…
Hi, Shell for making 3x65 binoculars from two Nikon TC-E3 teleconverters. Use M5 socket cap screw with flat nut for the axis. I'm printing the eyecup with soft gum filament and 1% infill with 2 perimeters so it stays soft. Print Settings…
