Print in Place Chevy K5 Blazer
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
- Downloads
- 653
- Likes
- 89
- Rating
- 5
186 models
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
Needed a mount for my new bike and since there was no space on the saddle pole left for the default BLAZE mount, I decided to design one. The BLAZE light snaps into the mount, so no extra fixation is required and it can easily be removed…
Bracket to attach the SIGMA bubble tail light to a GoPro Mount. The advantage of this holder is that the SIGMA Blaze does not need to be modified. The original side "wings" which serve as rubber holders of the original attachment, do not…
A Short Holder for the Figma Blaze rear light that fits the Fizik Saddel clip
I wanted a rear light for my old MBK Mirage that light up when I go through a tunnel and when I pull the breaks. The Sigma Blaze does it perfectly. You'll find what you need to plug it under the saddle with two serflex. NB : this bicycle…
Exposure Blaze MK3 is apparently a really expensive light that comes with a not very durable clip for mounting on the seat post. I made this for a buddy of mine who's really thrilled about my design's performance. There are stls for 27.2…
Gcode is a Garmin twist-compatible mount for the Blackburn Dayblazer 800 bicycle light. STL is just the light section, needs to be mated to a suitable Garmin-compatible model, as referenced in this design. 4mm width zip ties to secure.
🔥 BlazeTooth : The Fiery Fusion of Toothless and Flames! 🔥 BlazeTooth is a unique 3D model that combines the spirit of Toothless with blazing flames. With fiery wings and a flexible body, this dragon is ready to join your collection.…
A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…
This was designed to work for installation in my 2007 Chevrolet Trailblazer SS. Dash kit prints FACE DOWN with tree supports. I printed with 25 percent rectilinear infill and 4 walls / 4 top and bottom layers on my Bambulab X1C. Be sure…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The source marked this model as adult content.
blaze · planter an elegant modern minimalist planter designed for contemporary spaces. this planter features a clean, geometric silhouette with a wrap-around drip plate that seamlessly extends from the base. The elevated design allows for…
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
The original model wasn't quite suitable for printing and assembly, so I cut it up some more, and made some inserts to add strength at the joints. You will need to print multiple of some inserts and I labelled those files as needed. This…
This is a knob cover for the Blazer GT8000 Big Shot torch, made to allow for easier 1 hand usability. Feel free to remix and change the fins to your liking.
A reindeer character designed to print with supports on build plate only. Scalable & Paintable DND figure. Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…
Easy to print, will need support. The second piece glues on and the magazine will load in
Fifth set of Sonic figures featuring two future furries Set includes · Silver · Blaze (May update this in the future with Super SIlver and Mephiles if I ever make them) All my figurine and statue models will always and forever be free! If…
I made this adapter to replace the unused ash tray with a USB/AUX cable (paid link) so I could connect and charge my phone. I used it for a 1990 Chevy Blazer, but I believe it should fit Chevrolet and GMC trucks from 1973-1987 as well as…
A happy Kirin! The tail is a separate part, and is designed to be connected with a wire with 1.2mm diameter.
FMS FCX24 Chevrolet K5 Blazer bottom protector. Works with my FPV camera mount . Needs 8 small screws to mount (make sure they don't stick from other side because they can scratch steering servo). You need to print: 1 Left protector 1…
This is an enclosure for the Pixelblaze micro-controller. The screw holes fit at M2x7mm size screw. Print instructions Lid prints best with the top down, I didn't require supports but you can enable them if needed.
Hello. Since I had the K10 cab measured for the expedition frame, I decided to create a top body as per K5 Blazer style. Excuse any proportional imperfections compared to Blazer, I just used photos as source. Side windows have 1,5mm…
This is a knob replacement for the Blazer GT8000 Big Shot torch. It is made to to allow easier 1 hand usability of the torch without the bulkiness of a knob cover. Feel free to remix this and change the fins to your liking.
This is a circular stand for the Blazer GT8000 Big Shot Blazer torch.
The set of parts for assembly and printing machines as promised :) Body recommends that you print from the PLA, the rest of the ABS The sequence of colors is written in files. 1.Shiny bolted to the axles via m3 bolts, dropping a little…
This is a perfect replacement stand for your Big Shot butane torch! Just slide the stand over the top of the torch and pull it to the bottom Easy print that will print in any filament with no tweaking if your settings. If your printer is…
Meet BlazeClaw , the Rare Berserker of the Crimson Howl — a feral, molten predator forged in the Crimson Chasm . This is a print-ready display bundle designed to look great straight off the printer in a single filament colour: ✅ Full-body…
simple dash mount for most smart phones, fits all recent models of Chevy Blazer. Print instructions Printed hollow without any supports. I used 3 layers for perimeter, 4 layers on bottom, 5 layers on top. Hole fits 1/4" magnet to secure…
2002-2009 Chevrolet Trailblazer (and TBSS) front door speaker adapter for 6.5 inch speaker. Easily clears the inside of door panel and window to the rear with most typical 6.5in components or coaxial speakers. Print face up with minimal…
M3 screws and nuts for the belt and the fan holder and M4 for the bearing holders. Fan duct is a EVA dual_5015_monster_horns_duct_v2.3 (included).
This is a remix of @Whity Rugged Box (Parametric) https://www.printables.com/model/258431-rugged-box-parametric This will hold the Blazer cartridge tray from the box, just remove the tray (with cartridges) and plop this in. It's a tight…
Dieses Modell ist eine Halterung für das SIGMA Blaze Fahrradrücklicht mit Bremslichtfunktion. Die Halterung wird mit einem Verschluss an die Sattelrohrschelle befestigt. Das SIGMA Blaze Fahrradrücklicht wird von oben in die Halterung…
This is a stand made to look like a donut for the Blazer GT8000 Big Shot torch. Can be printed in white and painted if you do not have a multiple filament color system.
Práctico llavero con el logo de Chevrolet para la camioneta tipo BLAZER. NO requiere soportes. Impreso en PLA con cuatro capas de colores : blanco, gris, negro y rojo. Fácil y rápido de imprimir.
This design is a 1/24 scaled 22 in. Traiblazer SS wheel for use with model cars.
Some people asked for it so here it is, please don't sell your prints. I used supports, made with PLA still holding up good after almost 4 years in the heat and cold. would love to see others remix and make it their own. please post your…
A Blaze elemental. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
If you're like me, paranoid about your printer randomly catching fire and upgraded your CORE One from an enclosed MK4S, this might be for you. Since Prusa themselves haven't released anything so far I decided to make a quick bracket to…
Print face up with minimal support. Tweeter hole diameter is 1.9 in. ID. Be sure to print with PETG, ABS, ASA or Nylon to withstand the temperatures inside of a car during warmer months. Hole alignment is perfect.
I'm prefer modular inserts with trays that can be removed and used on the Table for set up. I haven't checked to see if the upgrade will fit without changes.
My son wanted another “coin” and his favorite show is Blaze. To get some accuracy in the outlines, I printed this at 60mm diameter and 2mm thickness (1mm of this is the ring around the outside and the image to give good effect). It can…
Model based on the original T-Hook system from Montane. The motivation was the fact that Montane only supplies 2 hooks with the backpack and does not yet sell them separately anywhere. I recommend printing with material suitable for the…
Rugged parametric style box made to reuse two blazer brass inserts to hold ammo. Hardware needed: SIX- 3Mx35 bolts SIX- 3M nuts (nylon lock nuts work the best but other nuts work just fine. Anything between 2-4 walls and 15-50% infill…
**UPDATE August 23, 2023** Users reported that in some cases there isn't enough clearance between the Pixelblaze and the lid for the button to operate properly, and it can be triggered accidentally by tightening the screws. , I have added…
This pack includes two display options: ✅ Option 1: Blazefury Statue (A1-friendly) A bold, clean silhouette with deep shadow lines so the detail reads even in one filament. Designed to be beginner-friendly and strong on the shelf. Parts:…
Just put a few drops of Essential Oil on the cotton stick and voilà. I made a version for vent with horizontal flaps.
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
This is a base/stand for the Blazer GT8000 Big Shot torch. This is intended to be used as a base model, and them remixed/redesigned to fit your liking. This model will save you from having to measure your torch and give you the basics to…
Hallo, fahre die Kombination auf meiner Cube Satteltasche mit Beleuchtung und Schutzblech, daher sieht meine Lösung so aus. Ist auch gegen das Rausfallen gesichert .Für Verbesserungen bin ich immer offen. Wer die STL benötigt, kann sie…
Passenger seat handle for S10 Blazer. Can use the same screw that was on the original handle
FMS FCX24 Chevrolet K5 Blazer FPV camera mount for Diatone SNT Sniclo Race480 FPVBOX camera. Snaps to FXC24 frame. Prints with supports upside-down. I used double-sided 3M tape to mount the camera. Version 1 - first version, camera can be…
This is a simple case for a Blazebuddy "tabacco" lighter/pipe. This is for the original version of the Blazebuddy where the bowl is covered with a plastic circular disc. I have not tried to use it on the other newer versions. The holes in…
Just a stand that i designed that holds and allows charging of the Zeblaze Stratos 4 using the charging cable supplied with the watch. I have not tried it with any other Zeblaze models but it may work. Supports not required.
I made this an all in one file with an divider.
Adapter for the Sigma backlight for a Thule chariot trailer.
This fits the Pixel Blaze v3 LED controller and attached sensor board https://electromage.com/pixelblaze in a very small footprint with attachment lugs for wearable uses. There's holes for the microphone and a pushable button. The short…
printed at 1.16 quality, no supports, 3D details
This bracket holds a BlazeCut T-Series Fire Suppression Module and makes it super easy to mount on the ceiling or wall of a 3d printer enclosure. The BlazeCut module is fantastic for 3d printer enclosures and provides great protection…
Warning - the mounting holes/webbing inside the cutout are not perfectly centered. The window cutout is fine, and this just means that the inside guide will only fit in one orientation. It's such a non-issue that it wasn't worth fixing…
Caja adicional para aprovechar el espacio superior disponible en la consola central de almacenamiento de la SUV - Blazer RS - Chevrolet. Solo ocupa una parte por lo que deja visible la parte inferior. Lo diseñé en dos partes por lo que NO…
This is a square stand for the Blazer GT8000 Big Shot torch.
Gear used in the blend door actuator of many GM vehicles from the 90s to 2000s. Picture has the gear installed in the actuator from my Blazer. Printed in PA6-CF, which is arguably not the best gear material due to abrasiveness , but was…
This is an adapter designed to mount a Sigma Blaze light onto a Garmin mount. I created this because I ride my bike in cold temperatures with gloves, and it's very inconvenient to remove the light using the original Sigma mount.
This is a stand for the Blazer GT8000 Big Shot torch. The stand is made to be a comparable form factor to the original stand.
peavey blazer 158 knob 3d
A friend of mine bought a classic old 1985 K series Chevy Blazer which had a broken center console mount. Unable to find a replacement or reproduction part, I modeled the part in Fusion 360 and fully filleted all around for additional…
Overview: The Atomstack M3 Blaze X includes an amber acrylic safety enclosure, which works well. What it doesn't include is a way to route smoke and fumes out of your workspace. Atomstack offers a proprietary filtration system as an…
For those persons that own early 2000's S10s, Blazers or Sonomas, you probably hate the useless center console CD case holder, this bin replaces the CD case holder. I made this for my 2004 S10 Crewcab, it took a couple of tries, but I got…
Blazer Bet Mat The body was mounted on 10 chassis and has 200 holes in the bed. The mat cover that. There is a normal version that ends at the bed and an extended version that closes the gap between the bed and the seat. Blazer Rear…
After seeing the announcement for the new Prusa Enclosure I was very interested in it's features. Especially the fire suppression system was something I wished for my IKEA LACK enclosure. So I found a source to buy the BlazeCut T050E Fire…
The holder was created for the SIGMA Blaze rear light to be fixed to the Gazelle bike rear fender. I got the SIGMA Blaze light as a birthday gift and it has an integrated braking light. Usually the Blaze is made for the installation on…
this is a basic slingshot with 3 holes
I thought it would be cool to create a coaster for the local NBA team. Meant to be printed on a Bambu Labs printer with an AMS using 3 colors (White, Black, & Red). Note: it's oriented with the logo down for printing on a textured plate.…
Use to mark trails. Can be printed as single color embossed, or each part a separate color then bonded. Print in different colors for different trails.
Adapts a Sigma Blaze rear light, which is intended to mount on a seatpost, to a standard rear rack.
Replacement topper and steering wheel for Nylint Blazers. Free for personal use, contact if you want to sell.
Upgrade kit for nerf trailblazer to give it a 9-dart cylinder and (upside down) stock attachment point at the bottom of the grip. I highly recommend making cuts into the frame where the red lines are on the image attached in order to…
Handle replacement for Cosori Dual Blaze printed from impact PLA.
originally posted by HotSliceOfJesus on thingiverse, i scaled, cleaned and chopped it to print better. Print instructions Category: Vehicles Summary originally posted by HotSliceOfJesus, i scaled, cleaned and chopped it to print better.
The Idea: An easy to install clamp to securely mount fire suppression in your 3D-printer. The model is designed to work with all Blazecut T-Series Fire Suppression which have an 19 mm outer diameter. The perimeters have been increased for…
I had a problem where the buttons on my blazers kept breaking, so I designed this so that i could make as many as i needed. I printed in ASA and it held up.
Why would Nikon sell a binocular with no provision for an objective lens cap? We can only speculate. But with 3D printing we have a solution. This lens cap should fit the Nikon Trailblazer ATB 8x25 and 10x25. It it will probably fit the…
Temp and mode selection knob for GM HVAC panel on the following vehicles: CHEVROLET BLAZER 1995-1997 CHEVROLET S10 PICKUP 1994-1997 GMC JIMMY 1995-1997 GMC SONOMA 1994-1997 OLDSMOBILE BRAVADA 1996-1997 These have a very small D shaft and…
This Remix adds holdes for a AlveoONE filter, a mounting relief for a Satel DRP-100 Smoke Detector and mounts for a BlazeCut. The smoke detector needs a powersupply of 24V and a circuit that triggers at currents >10 - 20mA. It shall cut…
The Phoenix Blaze Trophy is a captivating emblem of innovation, resilience, and the relentless pursuit of excellence. Inspired by the legendary phoenix and the transformative energy of flames, this trophy embodies the spirit of rising…
Blazefury , Defiler of Frost As you can see I have printed it out on my Geeetech A10T in PLA ( silk copper and silk silver ) I use Prusa-Slicer , After you load the STL file click on SPLIT TO PARTS , so you can print it in any colour just…
Here is the awesome looking Portland Trail Blazers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a commercial license to sell my prints? Join as a member…
A 3D printable version of the Trailblazer's Rememberance Pen. This is intended to be built around a Pilot G2 Pen Refill ( https://a.co/d/0e4aVFS2 ). Alternatively, the Placeholder can be printed instead of a real pen. All files can be…
This is a lamp that takes a 16x16 WS2812 LED matrix controlled by a PixelBlaze. Print instructions This should be printed with supports and using a transparent filament. I have not tried translucent coloured filaments, but that might look…
This is an insert for the Travel Edition of Trailblazers for storing the trail and player cards and the animal tokens. The 16 player cards go in the front, the trail cards go in the middle, and the animal tokens go in the back. It's best…
Same as the original, just modified for the driver side.
Portland Trail Blazers Oversized Necklace Logo that I designed. I hope you enjoy!
The Blazepipe Bomber is one of the most feared assault specialists in the Ashmaw Clans , advancing through smoke and scrap with pressurized tanks strapped to his back and a brutal close-range weapon gripped in both hands. Wrapped in…
Another bracket for the Blazecut Fire suppression system for in the Original enclosure. Printed in ASA (can also be PETG ). Additional needed 2x brass M3 thread insert and 2x Bolt M3 x 8 mm plus 4x Zip-tie. No drilling use the original…
Print Settings: Recommended Material: PETG for increased strength and durability. Layer Height: 0.2mm Infill: 20% Supports: Yes Assembly Instructions: Print the Heavy Duty Suction Cup Bracket with PETG filament Attach the suction cup…
FMS FCX24 Chevrolet K5 Blazer hitch to connect Lego Duplo trailers and carts. Base is mounted to stock rear bumper mount with stock screws. The hitch part is detachable, just press on the sides to mount or remove it. It moves up and down…