Counting matching models…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Simple Vesa mount for ipad or android tablet with various size and various screw support (m4,m5,m6). there are three screw variation, m4, m5 and m6. all flat heat, so it can flush without bumping the ipad or tablet. there is short,…
Designed for Cube Stereo Hybrid frame but probably suit most most frame. Attached with double-sided tape. Note! Make sure that the cables are long enough to turn the handlebar. Recommend to print with supports. I prefer the “closed”…
Bracket for mounting a nema17 motor to a 2040 v-slot extrusion Category: 3D Printer Parts
Included are two styles of side brackets for your own DIY Eurorack case and its Gie-Tec rails. Both the 3U and 1U (Intellijel) brackets include countersunk holes for M5 flathead screws for mounting the rails, and M3 flathead woodscrews…
Kryptonite Evolution Mounting Bracket that fits onto the drink holder. Example bike is a Tenways CGO600. Printed in ASA on a sidewinder X1 with a 0.6mm nozzle.
A bracket that hangs on the PS5 and holds the Pulse3D wireless headset and DualSense Controller
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
Print at least 4 of these and add a shelf to the bottom of your MFT/3 table
This bracket supports the GPU by bolting to the back of the GPU and the bottom of the NR200 case. I designed the bracket for my RX6800 reference, but I think it should also work for the RX6800XT, RX6900 and RX6950XT as they seem to have…
Designed for use with M3 Bolts and Nuts.
Easy adjustable brackets for gridfinity bins and baseplates, fited to ikeas ivar side beams. Printable without support. Suitable for sinlge-row and double-row bins or baseplates.
USB extension mounting bracket for aluminum profile cockpit to connect the steering wheels via USB.
Two point strap bracket for the RC2 controller. Didn't like existing designs which either blocked the screen or the grips, so I made this one which leaves plenty of room for your hands to rest on the controller, while using the existing…
Needed a bracket that I could mount one of the common rectangular digital temp / humidity sensors to my 2020 extrusion. Works for top/side or bottom mounts with blind tnuts.
UDPDATE ADD VER Engine Bracket AXIS V2.1 Engine Bracket AXIS V1 Model The X bracket differs from the original one. It does not hang in the air. The length of the guides has been increased ----What do you need----- 1.Insert nut M3*4*4.5…
My MK3S+ is in a Printed Solid enclosure in an unheated garage - in the winter, it is too cold for the printer, so I designed a heater bracket to heat the enclosure to a working temperature. This heater bracket was designed specifically…
Print two of these models (one mirrored) to create an easy way to hang a rod for a photography backdrop. We used ½" conduit which fits allows the backdrop to be easily hung (through the sleeve or with clips) or replaced with another…
Vertical Side Mount for the Ender3v2 screen. I have the printer high on a shelf and needed to access the screen from the side. This mount can be used horizontally too, but you need to update the firmware to Marlin to activate landscape…
Expansible filament support This models work in parts to construct one or a custom cabinet to store filament for 3d printers. Instructions 1. Use the face side structs and join with 4 of the bridge unions, "top" and "bottom", fit in the…
Simply align the screw with the corresponding increment you would like to test the tolerance of. Then just twist the screw and see if you need a tighter or looser fit. Hope this little guide helps!
Fix your bed in minutes and sleep without worries! Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together,…
Both of my center brackets on 2 separate Mainstays brand clothing brackets failed and broke for a total of 4 brackets. so I created in Tinkercad a bracket and a sleeve for the part that broke to begin with the part fr the horizontal bar…
Bracket for the La Crosse TX145R rain meter. May fit others with similar size. Designed so the rain meter sits securely and to allow water to drain easily. Secures with 4 screws (I suggest deck screws as they won't rust). You absolutely…
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded…
Hey! I designed a simple, easy-to-print set of shelf brackets. I recommend using my print profile if possible (it was prepared in Bambu Lab) - but if not, at least make sure to orient the brackets the same way I did (see screenshot).…
This mounting bracket for a weather station based on a temperature and humidity sensor is mounted on a 38mm diameter satellite dish mount. We recommend printing with at least PETG material to withstand outdoor conditions. The bracket fits…
The original bracket is broken. The bracket is clipped into the cover.
Phone was constantly sliding off the wireless charging spot and stopped charging, so i made a bracket! Compatible with non-Max iPhones including case. Pictured is an iPhone 17 with Apple Silicone Case. For Ford Focus fourth generation…
This bracket was designed to support the horizontal divider between the drawers if they become damaged. Often the dividers are damaged where they are secured to the sides and the supplied fixings can not secure them. The bracket is…
This bracket mounts 4 5mm cables to the upper tube of a bicycle. Useful for Rohloff users that have 1 Brake and 2 shifting cables to be routed to the rear of the bike. Printed in ABS with 0.6mm nozzle and 0.35mm layers on the side,…
This bracket allows for mounting a DB15 (display) connector and MicroSD extender. Designed around this SD extender: https://www.amazon.com/dp/B09CKRDFTH The DB15 connector is more typically mounted behind a metal plate. A washer can be…
There are 2 sizes: 100x72 (for those who prefers metric-friendly sizes) and 3.5"x2.5" (for those who lives in the US). To make the shelf you need to print corresponding STL file in normal and mirror mode (i.e. to have both- left and right…
A replacement for half tray bracket for the excellent Wall Rack from Frontier Gaming. Unfortunately when I moved house I lost a bracket, so had to print a new one. This was printed in Matte Charcoal Black but I'm sure Rose Wood would look…
Diese Schutzbügel ist für die Verlegung von Solarkabel über scharfe Kanten von Blech-Dächer gedacht. Damit wird verhindert, dass die Kabel durch die scharfen Kanten beschädigt werden. Es sind 2 Durchlässe für Kabelbinder vorhanden, damit…
This model is compatible with the lego system.
Reinforcement/Antivibration bracket for Tenere 700 with TFT dashboard. Designed for www.dr2.cz phone/navigation holders installed with use of mounting kit for World Raid/Rally version (link below).…
I wanted to attach a holder for my favorite build plate cleaner: https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder OnShape CAD Model:…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Since you can't use T-nuts on an Ender 3 V2 Neo to install a lineair rail it's required to drill the X-axis profile This bracket centres the linear rail on the X-axis so it can be drilled correctly. Required tools: hand drill 3.5mm drill…
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
Fancy bracket for wifi AP or whatever would fit. To attach to the wall. The beams look like they are coming out of the wall due to a collapse. Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes…
Originally design as a Bracket to hold long LED lights I bought online under a shelf, but can be used for various things. It slips over a shelf and it has a tightening screw to hold item inside in place. It was design to fit shelves 16mm…
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
Small and strong pipe holder for 20mm pipes of all types. Profile feature 3 types of holder with 2 different depths, 1.5cm and 2.5 cm. 1 short, 1 medium and 1 enclosed holder. The mounting holes are 4.5mm. Please print it facing down due…
My printer stand is built from extruded aluminium ftubes and plastic corner joiners. All available cheaply at Bunnings. When the printer gets up to speed the while stand sways back and forward. These brackets make a huge difference in…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
This is a simple cable management bracket. I used it to organize cables in my studio. I used PETG. 0.2 mm layers. With 20% infill and 3 perimeters, the bracket is firm and flexible enough. Check the drawing for the exact measurements.…
Best printed with standard support, but also possible without supports, brim recommended to avoid warping.
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
Flush mount design Hidden fasteners to mount the bracket Just press the google unit into place, FRICTION does the rest!!!! (IF your machine runs true to size, just print it.. you MIGHT need to scale in slicer for a tighter fit IF you run…
Wall mounting bracket for a compressor water separator.
We ran out of space on our bookshelf, so now we have to place books in two rows. To make better use of the space, we want to add an extra shelf board a bit lower than the normal book height behind the first row of books. I didn’t want to…
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
I've redesigned pfte bracket with fittings I have at home.
Costco Grabber Holder Wall Mount Hanger Bracket Hang Costco Birdrock Home Grabber Tool handle left or right. Print hanger on back, no supports needed. Works with grabbers under 27mm (see pic). Can attach with command strips, or has two…
Decorative shelf bracket Printed in PLA / 0.4mm nozzle / 0.2mm layer height.
I had to change out the original reverse camera in my WRX as it did not work with the new Head Unit. I purchased a Natika Backup camera from Amazon, which works well, but the method of installation did not suit me, I did not want to put a…
This bracket can be used to reinforce joints in tables, frames, or other furniture. I printed with PETG. 0.24 layers. 3 walls. 15-25% infill. One side is 7cm long , other 3cm.
This is a bracket for a 3/4 inch French cleat system. Autodesk files included and parameterized for other cleat sizes.
Bracket you can use to mount your cooler to your boat.
This GPU sag bracket was designed to fit between any two fans. This makes it perfect for many fish tank cases, but it was designed specifically for the Antec C5. The base secures into the screw alcoves of the fans and brings my Galax RTX…
The old chrome plated brackets had become more corroded than I realised. I didn't want to drill more holes in the tiles so decided to make brackets to match existing. These are the result using Fusion as usual, apologies regarding the…
Helps holding your Coroplast model in place for your props. Will fit 10mm Coroplast models. Printing: Filament: PLA Infill: 15-20% Nozzle: 0.2mm No supports required
A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…
Part of my collection for furniture: https://www.printables.com/@MichaMietlins_755343/collections/3218237
My towel rack broke so you know what had to happen!
Cable brackets for both a single cable and multiple cables. You can screw these brackets to a surface but also, for example, stick them to a surface with double-sided tape. Set the infill to 100%.
Information Brackets for the more than capable but slightly older CalDigit Dock, the USB C Pro model. Attached are two versions, one for the now discontinued Alex add on unit (monitor shelf with drawers) so it can just be clipped…
Remix of existing brackets but I needed to attach in a spot where I couldn't get behind so had to move the screw hole 90
V1.0 I may need to update this model. But you are welcome to try it out yourself. Most likely, it would just need a slight scale adjustment. V1.1 Added taller slots for cables. V1.2 Moved switch slot 3mm
Bracket to hold a 2020 to the rear frame. Parts needed 4x M5X10mm+ heat inserts 4x M5X50mm BHSC 5x M5X10mm BHSC 5x M5 v-slot nuts. Which ever type you generally use. The bracket with the larger slot goes on top. If you skip the middle…
Tested and works with S-150-12 model. Print in PETG.
Shelf Bracket with Cat Head! For best results, rotate bracket and place on cat head side on bed (see last photo). No supports needed. STL file dimensons: X: 5.5 inches Y: 3.17 inches Z: 7.39 inches STL can be enlarged to any size needed…
I wanted to put my 52Pi ICE Tower Cooling Fan on my Raspberr pi 5 but the brackets were incompatible due to the PoE header. So I made my own. The 52Pi ICE Tower Cooling Fan was originally made for the Raspberry pi 4, but these brackets…
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
If like me you buyed an a older version, you may noted that is a little more large than the printer, here is the fix
This is was designed for M6 bolts so you can easily mount a power strip to your sim racing cockpit with aluminum extrusions. I attached a photo showing what power strip this is intended for but also have the SKU # - SKU:414078. The holes…
Simple bracket for the Shimano Charger so it can be mounted on a wall. Made to fitt the EC-E6002 Charger Printed with 4 wall loops and 25% infill.…
This is was originally designed to make a target stand utilizing standard conduit or PVC pipe. v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.…
this is the bracket I use with my flsun T1 pro to hold the spool end of a 21" long piece of ptfe tubing. the center hole needs to be threaded to match whatever QR fitting you choose. I used the SMC KQ2H04-M5A so I threaded it to 5x0.75.…
Rear kitchen drawer brackets, marked left and right, with a .25" lip.
The original model had too small thread for the fitting, this model fixes that
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
This brackets are replacement parts for your BMW (G20/G21/..) All-Weather Floor Mat and are used to hold the metal inserts around the BMW logo in place. I lost mine during a car wash and this part can't be ordered. I could have only…
This is a bracket designed to be epoxied to the back of the trunk cover on the BMW X3 or X4 to retrofit the trunk strut that was removed in 2019. Took design cues from the OEM part and revised it so that it'd be durable as a print. Should…
PCIe bracket for your PC case to mount a 140mm FAN to cool down your PCIe expansion cards.
This is a computationally optimized shelf bracket, designed around ~100lb (~440N) loads, although I'm fairly optimistic it can hold more than this. When printed vertically, it uses no support material. It is incredibly strong for its…
About the model: Have you got a small desk? Would you rather tuck your keyboard away when not in use? If so, this could be the solution for you! (Actually, it was a solution for my bluetooth keyboard, but you can probably borrow it too).…
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
I designed this brackets to be used in combination with cheap 15 mm diameter metal 'central heating' tubes to make a filament spool shelf. I used one: 15 mm x 1,2 mm x 2m and cut it in half. I costed me less then € 5. Printed with PLA+…
