The source marked this model as adult content.
Print approx. €1.98–€2.43 excl. taxPreliminary estimate for one variant
- Downloads
- 1,862
- Likes
- 491
- Rating
- 5
582 models
The source marked this model as adult content.
Print approx. €1.98–€2.43 excl. taxPreliminary estimate for one variant
Tried for fun to make a horn and this was the result. It is a surprisingly loud thing. Make sure to block support up the tube when slicing. I painted on support around the opening and in the curves of the tube.
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
Overview I modeled this after the Hakko 599B soldering iron tip cleaner. I've been using it for several years and it's worked quite well for me. The biggest feature is how the base of this model has plenty of space for weights to be…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant
I love playing the board game "BRASS - Birmingham" ;-) So I decided to make it even more enjoyful and created my own buildings. The buildings are designed to put the original building plates (e.g. beer, …) on the industry buildings. The…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
The ones I found did not fit my needs, so I made this one. It has a small hexagon to fit in the empty inset. Inset is included in 3mf file. Step file included!
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Andy Rooney was my favorite television personality who closed every 60 Minutes show on NBC a few years (decades?) ago. He was the ultimate curmudgeon. A classic observation he made was that “If the chances were 50-50 you would get the…
Print approx. €2.44–€2.99 excl. taxPreliminary estimate for one variant
I widened the gap on the dockmount becuase I find the hammerhead nuts frustrating to use compared to roll-in T nut. Print at same orientation as original model (on side), add supports. There's a version with and without the spot for the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Tsarist Brass Knuckles.
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
I printed the model with ABS 100% Infill, I don't know how durable it is, since I do not intend to hit someone with it. Better Suited for large hands ( I have Glove Size 11) Printed with a Creality K1
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
What is this [ Update 2: Several users reported that the cardboard components don't seem to fit. Turns out in the latest reprint the carboard is slightly thicker. In the file section you can now find a “Version 1” and “Version 2 folder”,…
This is a prop, for entertainment purposes only Fake brass knuckles, designed as a play on words in regards to the phrase “knuckle sandwich”.
This is just a funny prop/toy. It's a Happy meal that we all wanted but never got… Make sure to post your make!
This is a non-commercial file. Contact me if you're interested in selling these items. 3MF file included for Bambu Studio
Insert for the retail edition of Brass Birmingham. I used Sislar's box as a basis for all parts exact merchant tiles and card holder. For the player boxes, I completely filled the box and cutout the industrytiles, link tiles and score…
This is a remix for the pusher and breech of the Smiley blaster, so it now doesn't need any brass for the breech. The only added hardware is 2x -012 o-rings, for the tip of the ram. You DO need to lubricate the o-rings at the tip of the…
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
This is a little Gridfinity model I have made that can hold your active soldering iron, and has a tray for a brass cleaning wool type thing. I'm using it for my Pinecil (V2), but it should also work with the TS-100, and similar…
Summary Brass Prep Station For the gear box plates, recommend a 20% infill and 3-4 perimeters or walls. For the gears (main helical gear and small helical gears), 4 perimeters and 70% infill plus 5 top and bottom layers. For the housing…
…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…
This is a brass catcher for the Ruger 10/22. There are two versions, one that hooks onto the picatinny rails and the other that attaches with velcro or a command strip. Below are some instructions for attaching both models.…
If you like fighting and boozing this weapon is perfect for you! You have to put a small coin in the slot provided for this purpose and uncap your favorite foam. Si tu aime la bagarre et la picole cette arme est parfaite pour toi. Il faut…
I liked the concept of the OPs model but it simply wouldn't work for me due variances with my 10/22. I am posting this here in the event it helps someone else.
Case for your soldering iron - brass wool / tip cleaner. As a total soldering noob, I need my soldering equipment only occasionally. I learned the hard way that I really need the brass wool. Putting the brass wool to/from a plastic bag…
Clean and neat organizer for your small brass brushes. Mount to your multiboard to organize your space. Could also be used for some toothbrushes if you have multiboard in your bathroom. Printed on Elegoo Neptune 4 Pro Printed with Elegoo…
I recommend 5 walls and 50% infill You might need to scale it to best fit your hand They can stand on their own and be used as Halloween décor. Inspiration from @toothhurty007 on Instagram
A brass dragon perfect for your game! Print with supports or in pieces. You can print the baby as is though. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the…
Features It fits a cheap Chinese 80W soldering iron that is also compatible with threaded insert adapter It is pretty stable, most of the slack is coming from the bearings themselves The soldering iron holder is a separate part for easy…
The source marked this model as adult content.
I quickly whipped up these brass knuckle beads for a personal project but thought I would share them since there is a contest going on. I havent had a chance to test print them but I will soon. If you print some please let me know what…
a brass knuckle box cutter that is actually functional and easily withstands day-to-day use. i'd reccomend printing it flat and with a little bit of supports on the cutter side.
IT WORKS! Check out this MINDBLOWING SLOWMOTION footage! I will add content soon! Originally made as gift for my father. Has brass turned parts and real hardwood sides. Modifiable STEP files + 2D blueprints (for machining) are available…
The only adapter currently available is for a trumpet mouthpiece with a 12mm diameter (Schilke in this case). I plan to add more clips for different diameters. Until then, the easiest way is to scale all parts so that they fit onto the…
3D printed holder for brass sponge to clean solder iron tip. Size: 50x55 mm Over 100 downloads on Cults 3d.
I found the popular “Skadis T-Nuts Mounting System for Ikea Skadis Pegboards” from 6d6178 but wanted to have a version for M3 screws. In the original Thing, there are quite some arguments why this will not work. BUT! I used threaded…
A customizable parameterized mouthpiece design.. print your perfect mouthpiece. First step: Go research mouthpiece design a little. Here's some great sites: BestBrass has some phenomenal comparison charts, (righthand side) cross sections,…
A set of stackable brass sorting trays to separate your range pickup by caliber. Choose the size that best fits your needs. Small is 150mm, Medium is 175mm, Large is 200mm, so any size should fit on a 220x220 build plate. Pictures are…
This is an insert / organizer for burncycle, all of its released expansions (as of December 2023), and the Brassmag Volumes 1 and 2. It all fits in the core box, has no lid lift, supports vertical storage, and was designed to aid setup…
This is a brass knuckles knife style box opener or jast a prity thing for you. Its about 145 mm total leght and perfectly passes to a midle hand. So… just download and try it! If you like it - press " like'' button. If No… - wright a…
4/14/2025 Modified the tip holder tab to be offset as it became apparent that it is interfering with the iron. Images do not reflect the modification.
Last year Roxley Games kickstarted a deluxe version of the classic Martin Wallace economic strategy game Brass . The deluxe edition was renamed Brass Lancashire , and a follow-on game Brass Birmingham was also released. Both of these…
Remixed from Brass (plastic) knuckles by G3ox. I thought there should be a version with spikes.
I assembled these files from an existing (and some defunct) Brass print files, and modified the player box to fit all of my industry and link tiles. A full description of the player box changes and how everything fits: Made link tiles…
This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models. Bin Mount Sizes Single Double (about 75% support of each bin) Double Longer (100% support of each bin)…
Valknut brass knuckles with hollowed/protruding symbol
While Silly's alternate pusher does clear nightingale magazines as advertised, its a little tight compared to the original. I spliced on the sealing version of Silly's pusher to the body of the original design to let magazines drop…
Small box for the ruthex solder iron tool for melt in thread inserts. Snaps together with 4 5x2mm magnets. Other versions: 6x3mm magnets Kleine Box für die Einschmelzhilfe für Gewindeeinsätze von ruthex Als Verschluss dienen 4 5x2mm…
***************Notice*************** This design is intended to be printed with PA6-CF Nylon and may be subject to failure after extended use without using a material with similar shock-resistance. Introduction This 100% 3D-printable…
This additional heavy base is designed to prevent the original brass heat-set insert tool from tipping over. Print it and fill it with any heavy parts you have lying around (I fixed the inserted screws with wood glue to reduce noise). Use…
Given how massive the Ancient and Adults are, you might want to consider printing it in pieces. For an Adult size, scale each piece down to 75%. For Young scale down to 50%. Want to access even more models not found here in Prusa…
(((-- Si vous appréciez ce partage, pensez à cliquer sur "j'aime". Ça m'aide à proposer du contenu --))) Ce récupérateur de douilles fonctionne avec quatre aimants 5x4mm que vous devez coller à l'intérieur des emplacements prévus. Il…
Self defense use, a novelty, or whatever you choose. Maybe this will help you drink from the skull of your enemies? This is my knuckle duster design, “GearHead!” Perfectly legal as a self defense weapon in the great state of Texas. I…
Greetings All, This is a brass catcher to be printed in TPU/flex only. It's a deep cut remix. Shout out to Mark206 for his PLA version. Ruger 22LR Brass catcher by mark206 - ThingiverseRuger 22LR Brass catcher by mark206 - Thingiverse I…
Original model by Brass Lantern Minis. I just removed the base for anyone who likes to do their own basing.
Description: Scaled for 28–32mm play, but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal
This brassknuckle koozie is made for a 16oz can
A holeless knuckle duster. Inspired by the NickNuk Pow! and Elder Futhark's Hammerhead knucks. I went through several iterations for a good feel. It's still small compared to full dusters and may slip in the hand. Thickness of 10mm-15mm…
you can just slide this one in the type of brass catcher shown in the pictures. this model can be found at places like Aliexpress. what the frame will do is make sure that is stays open and helps to presents from folding that would…
Created by Designmond @des_3526156137
Scaled for 28–32mm play, but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal
Painted 3MF for Bambu Studio included
I did not find another of this hanger, and my wall wasnt complete without it.
I modeled this for my wife who wanted a way of displaying the Quill Pen that we purchased a souvenir after watching Hamilton on stage for the first time. Since it is a quill pen, I thought it only right to use an Inkwell for holding said…
This is a 3D printable brass knuckles prop designed strictly for display, cosplay, film, photography, and educational demonstration use . The model is intentionally styled as a non-functional prop and should be printed with rounded edges…
Brass Birmingham Deluxe Edition Insert - Streamlined Setup & Organization Designed for Efficiency, Convenience, and Style Introducing a custom-designed 3D print insert for the Brass Birmingham Deluxe Edition , created to optimize game…
There are many brass heat insert press designs out there. I liked Maker Mike's design, however, I only had 2020 aluminum extrusion from a 3D printer. I redesign the arm to fit the 2020 and moved the clip lower so it will print without…
BrassEnds: Locked In. Ready to Thread. Bullet-inspired beads designed for hoodies, bags, gear, and creative projects. Modeled after 9mm FMJ rounds, these rugged little details add tactical style and functional flair to any corded…
This is a bullet/brass tray to fit the Hornady Classic reloading press. Print with 4 walls, 2 bottom layers, 3 top layers, 20-25% gyroid infill. With a 0.6mm nozzle you can do 3 walls. Supports are needed touching buildplate only to print…
Drziak na Gopro kamery v tvare boxera
A simple model to test the quality of brass inserts and practice for people who have never used inserts before. I recommend using a soldering iron and the insertion tools by ruthex…
These are M3 T-nuts for IKEA Skadis using M3 brass standoffs/spacers. On Amazon, you can search for "brass m3 spacer standoff female" and you should find kits of these. The sets will come with female-female and female-male. The…
Induction Annealer Design to make an induction annealer. Project goals: Relatively affordable Off the shelf components Simple electronic wiring Extremely consistent annealing Easily adjustable dropper Accommodates different cases…
Holds the brushes securely for quick access on the multiboard. The brushes sit nicely and are easily retrievable for quick use. Requires minimal filament. Two variants available depending on your needs. You'll need a standard multiboard…
This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal with this CAD model series is to release at some point an assembly model of the whole K1 to help creators design amazing things for this…
You will need to print this like the photo. Vertical. I do 80 percent infill with normal support on the bed only.
I think I've finalized this. I made a version that fits both a p320 and a p365 xmacro (the regular p365 doesn't have a pic rail unless you add something - I don't have this attachment). In order to work with both, it had to be taller. And…
1 x 1 Gridfinity holder for brass electrodes. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls For more information about desktop EDM check out rackrobo.io
I remixed the original insert-empty by @RostaP. The intent was to have a support for the honeycomb wall in which I can insert a threaded brass insert instead of an insert that needs a nut. What I done: First I made the insert full On the…
The lid insert has a holder for brass inset adapter ( this one https://de.aliexpress.com/item/1005006503495825.html ) and needs two 6x3 magnets. Step and f3d file included. PART_ files contain the parts only, SLICER_ files include parts…
Description: Scaled for 28–32mm play, but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal
When people see my other designs, people can see I like the sliding lid design (a lot). Doesn't take a lot of space etc. What's not to like? I also like tvkili's design for the brass players. Therefore I decided to make a nice sliding lid…
Originally made for my Omnifixo Display and Travel Case this is a simple holder a brass solder tip cleaner. I purchased this set: https://amzn.to/3uSnEU6 (rev share link) and cut one into thirds to place it in the holder. Keep in mind…
You will need to add springs to the bed to allow it to go lower so that the brass nozzle wipe will fit, you then put it on the underside of the metal carriage with a nut. Ive added a klipper macro at the bottom to help out, Marlin has a…
FDM Printable Scarecrow for Halloween Best results: 0.08mm layer height, 0.02mm nozzle, eSun PLA+ using Fat dragon minis print profiles. Painted prints by Amorrah
Soldering pen and brass wool holder. Fits Pinecil, TS100, or similar soldering pens Printed in PLA. Balanced, no weights needed. 3 hour 20 minutes print on an Ender 3 V2. Hardware : 8mm ball bearing(608, 22mm outer diameter) for soldering…
The original MK3/S uses POM nuts on the leadscrews. This design works with the more common 22 mm brass nuts.
40mm fan mounted with M3x5x4 inserts, does not constrain pins header. There's not much to add. I did not have M2.5 bolts until recently so I simply re-drilled the Pi bolt holes by rotating the M3 screw there for a while everytime with no…
Table clamp for 25mm tabletops. It's strong enough with the ¼ inch heat set insert to hold a SmallRig arm and a heavy phone at the other end. Included step files can also be easily customized for different thicknesses. The screw model…
Brass knucles hodler for microphone. !! DO NOT USE IT TO FIGHT PEOPLE !!
Description Scaled for 28–32mm play, but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal