1,059 models
With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…
August 20, 2024: Re-uploaded the unique MK4 parts as the original upload appear to be corrupt. This Tower Print Buffer has been updated to work with the MK4 and MMU3 system (It still works with the Mk3 and MMU2 as well). The frame mounted…
Buffer space hook which allows screwing the buffer to the wall.
I needed a way to mount the Filament Buffer for the Prusa MMU2s. I started with the existing "s-buffer-spacer" stl from Prusa ( https://www.prusa3d.com/prusa-i3-printable-parts/ ) and came up with this mounting plate for the side of an…
I added slots in the back so it can rotate back after one of the pins is removed (leave locknuts off) to facilitate loading filament. This is technically a remix of the OEM Prusa buffer but I could not find a way to point to Prusa's own…
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
Multimaterial - MMU 3 Multicolor Print-MK3.5S with multi colored segmenter-r3 This is a Remix / Revisitation of the original .gcodes of MMU3 Multi Material Unit. These .gcode are specific for printing by MK3.5S, and are provided by…
Simple G-Scale buffer stop, designed for being easy to print (lying on the flat side), easy to mount (push through rail from below between sleepers) and to work well. Not intented to be a scale model of a real buffer stop.
This is my remix for Paul's buffer system. I adapted the holder for the cassettes to be mounted in the table.
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Ständer für den Make Up Pinsel.
I recommend this instead - https://www.printables.com/model/555238-mmu3-filament-path-design This is new experimental concept for an MMU system where the retraction loop is contained around the spool using a “Cage Buffer”. Unfortunately…
Hello all, when I saw the RMU ( LINK ) I was blown away ... unfortunately I miss the open source and community idea :-( So I decided to create my own version of a mountable buffer and yes I certainly got inspired by the RMU version. No…
This tool is used to remove the PTFE tube from both ends of the Bambu Lab filament buffer or AMS hub. *Edit - I added a hole for a magnet to hang it on the back for storage. Thanks to djwhouse for the idea. There are options for circular…
MMU Slot buffer – FINAL version Hi everyone, here is my new design of a MMU buffer. Thank you Juergen G. for test prints and wasted material on the development from BETA version to this FINAL SLOT buffer version. As I am changing…
This adapter aligns the PTFE tube that delivers filament from the AMS to the filament buffer to prevent jamming that leads to filament loading errors such as “failed to feed the filament into the toolhead” (e.g. 0700 8006 142105, 0700…
Summary Smart Dry Box designed for the Ikea Samla 45l box. It supports 6 spools, each buffered by a fully enclosed wheel buffer utilizing the complete box height. Spools, Buffers and Desiccant containers all can easily be loaded from the…
CHANGELOG Main Instructions follow. 30/10/25 - Added spoolholder_spindle_mk4, spoolholder_roller_mk4 and buffer_mk4 by request. To keep things simple, these versions cut away some material to get them to fit on a MK4 bed. Reported to…
An alternate solution to MMU2S buffer. Easy to locate away from filament and easy to load. Somewhat of a remix (or at least inspired by) https://www.thingiverse.com/thing:3529934 from jgillick EDIT: Loop the filament around the wheel…
This is a Air Buffer to prevent light from coming inside the tent but still enable air to flow. I recommend printing it in black or any other dark color to restrict as much light as possible. Outer Diameter is 160mm such as the holes in…
This unit is to replace some of the stock MMU3 buffer while using the new cassette system. I have included a bracket to hang the buffer assembly from the back wall of the enclosure but it may not allow the proper clearances as I have not…
Remix of the great, compact filament buffer by @Paul_75970 that makes it compatible with the MMU3 R4 cassettes (Version B). Since I also wanted to use the remix of R4 cassettes , I couldn't use @mikedmor remix which squishes the…
This is a generic buffer stop for HO scale model railroad. The model snaps to rails of around 1mm width (with 16.5mm gauge). I modeled it to resemble PIKO buffer stop, but it fits other track systems (I tested it on my mehano tracks).…
Threading the filament into the buffer is still very awkward for me. You have to remove the segmenter, thread the filament around the roll and then push it up to the MMU, start the loading process of the MMU and then reinstall the…
Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…
I wanted mine to look like the OG and have a top load option, so I remixed it do that. The mounting files can be found on the original post that I linked. This only includes the files I changed.
Similarly to remix from @ticat_105850 , this remix significantly simplifies the insertion of the filament into the buffer (but uses newer R4 segments). Simply insert the ribbon fully into the cassette, push filament all the way into the…
End track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Print instructions Support: NO, Infill: 15 %. CHECK OUT other…
For my printer enclosure I needed something with screw holes so I added some. Also I designed a clamp for the PTFE tubes so they won't get sucked in. Just use a M3 10mm screw and a hex nut (there should be enough in the MMU2 spare parts…
Filament buffer to have the least amount of parts and improved wheel. The stands can be attached to the base using M3-10 screws, while everything else just slides in place. If needed a a small dab of CA on the ends will help secure the…
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Various lego compatible train track crossing , buffers and other bits Stuff iI've…
This is my version of the buffer required for the MMU (or MMU2s) I based my design on other similar buffers but wanted to add some modifications so I redesigned this one completely from scratch. The wheel turns very smoothly on a 6200…
5 July 20 update: Added a step file of the assembly If you're like me, you struggle loading the stock buffer. I've tried several auto rewind spool holders but have struggled to get them to work, particularly if the pool is full and not…
This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…
A fixed AR-15 style, mil-spec buffer tube that attaches to Picatinny stock interfaces. Printed in a single piece lying flat for incresed sturdiness. Mounts with two M5x30 bolts and M5 Hex nuts. The tube has 4 postions for the stock to…
Update 08/14/2021: Updated EndplateV2 to keep it from catching on the charging handle. Update 08/10/2021: Added a V2 Endplate that allows the use of metal endplates. Added a hole in the Rail so that the Endplate can be removed from the…
I modified the plate holders to be able to mount them with 3.0mm screws. This way I was be able to mount it straight on my Ikea Lack enclosure. Now I am be able to feed the filament from my repbox on top, to the back side of the Ikea Lack…
I really appreciate Manzn 's awesome work on the RMU inspired MMU2S Buffer . Unfortunately a clean print of their supplied spool wheels is not possible without using supports, which are tedious to remove and often leave remains…
This MMUS Slot Buffer Holder uses this others parts : Numbered Slot Covers by cjbeck : https://www.thingiverse.com/thing:4540766 See the Assembly.pdf file.
Update 1: I've updated the base a little - made the filament channel wider and added a chamfer on the entrance TNDave was kind enough to let me modify his awesome design, so I've made a fully printable version (you don't need the acrylic…
Hi, this is based on similar models to assist with removing the tube from the input side of the buffer. Main changes were to make it more printable from the fitting side. Also changed to look more aesthetically pleasing.
English: You need 3x M3-Nuts and 3x M3 Screws with a minimal length of 12mm. Furthermore you need to print 4x my remix of the original plate holder (small hole on one side).…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…
This is a remix of: https://www.thingiverse.com/thing:5266343 by vaxx1969 for easier printing and better connection to original LEGO tracks. Printed from eSun PETG The licence matches the original.
This is a remake of https://www.printables.com/model/272302-bambu-lab-ams-hub-ptfe-button, the difference is that its been shrunk with the bowden tube inside, so it fits on the AMS Hub PTFE Tubes which makes it backwards compatible with…
The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…
this model is made to work the MKII but I have fitted it on a MKI model als well and the mount looks good on that one as well so you can use it for that as well. for FGC6 users this is model ready to use with out any risk. for FGC9 users…
Double-sided short-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
This is a “ground-up” model inspired by "The Wedge RMU Mk3" Buffer. https://filamentbuffer.co.uk/ I did a lot of research on buffer systems and found the approach taken by their design was almost exactly the form factor I wanted. I didn't…
Modell train rail buffer for scale H0 1:87. Works on Märklin C-Gleis. It should also work on ather main manufactured H0 rails, like Fleischmann, Piko, Roco Settings Value Infill 15% Perimeters 2 Layer Height 0.2 mm Material PETG (PLA)…
(SF bolt checked: works with the SF bolt ) this model is designed for the MKII version of the FGC6 but it should also clear the MKI model. also a note this folding stock is compatible with the FGC6SF models credit note: most parts in this…
Help guide your PTFE tube out of the top of your auto feeder buffer to ensure reliable operation & stop it getting pulled over too far & jamming! BOM: No hardware needed PRINTING: Print PETG/ASA/ABS 0.2-0.3 layer height, 4 walls. Lay…
This is a simple filament PTFE tube tool used to disengage the PTFE tube from the connector. On the Bambu Lab X1 the connector is recessed in the buffer assembly and per Bambu Lab instructions, you need to detach the buffer, then press…
This is a modification to the filament buffer kit that comes with the MMU2s. I think that the original design of the buffer is to much of a hassle to load, since you don't have enough room to grab and push the filament towards the MMU.…
update october 2023: I added new optimized version V2. This works a little bit better for me. Feedback are welcome. I recently got my MMU3. Unfortunately, threading the filament into the buffer is very difficult if you have to hold…
I need mine to be loaded from the top as spools are on top. I also added "washers" to properly center the 5 wheels, it prevents from touching the other parts while rotating and they press properly the bearing axis. Make sure to assemble…
I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to apply pressure on the back plate of the CMMG BCG so that it has no movement when the bolt…
Double-sided short-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
This is an "airtight", compact and easy to fill filament buffer for your MMU2.0 setup. It uses a check valve for the filament so it is not pushed back on to the spools. Watch the video below on how it works. Print instructions How to fill…
Anycubic ACE Pro Buffer Guide — designed to improve PTFE tube alignment with the ACE Pro filament buffer and reduce feeding errors caused by the limited travel of the buffer mechanism due to angled PTFE tubing. This helps prevent filament…
This is a buffer stop female and male version. Have a lot of fun with it. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Filemantwerk PLA light ivory Category:…
This is a remix of original prusa mmu3 buffer holder. No supports are needed to print this file. Part 2: https://www.printables.com/model/610056-mmu3-top-ptfe-holderfor-ikea-lack-enclosure-v2 I made this model so i could keep my spools on…
I remixed the segmenter-R3 from : https://www.printables.com/model/531604-mmu3-printable-parts https://www.printables.com/model/638915-closed-segmenter-mmu3 I now made another remix of the mmu3 buffer segmenter. I designed one which is be…
MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…
See “ Differences of the remix compared to the original” section for changes description.
This is a hanging mount for the Original MMU2(s) Filament Buffer. [PC4-M6 Version] Features: Quick & Easy to load Reuses most of the original parts Keeps the Buffer out of the way Clean simple filament path to the MMU2(s) (Prevents MMU…
Print with the stop pointed up, no support, 15% infill. I did 1mm walls and top/bottom layers with a 0.4mm nozzle at 0.2mm layer height.
Hello, I have been using my Samla 22L - All-in-One - Compact Dryboxfor for more than a year. The operation is still problem-free. Now the time has come to add silica gel trays and small improvements. I incorporated the comments and here…
*Note: Newer version available here This tool is to remove the PTFE tube from the outlet end of the Bambu Lab Filament Buffer or the AMS hub (the device on the back of the printer that joins multiple AMS units, not the device inside the…
When you have enough bricks around to build lego trains attachment car, but no spare couplers, buffers and wheels - and all stores are actualy closed due to holiday season :-)… Print settings Modelled according to actual lego pieces and…
A simple print that is used to close the end of a PTFE/Bowden tube. The special feature: The plug has a buffer for the filament so that you can easily pull it out of the tube after you pull the plug off. I use this plug with my (dyna)…
This is a printable model for the Original Prusa Enclosure with the buffer of MMU2S/MMU3. How to print Use the default Prusa Slic3r Settings for PETG or ABS/ASA. No supports required. Printed with layer 0.2. Parts to print To use this…
Segmenter that can be mounted on the PRUSA Enclosure. Requires 4 + 1 M3nS nuts and one M3x16 bolt. 4 nuts for the segmenter for the screws that are fasten the buffer plates 1 nut for mounting the segmenter to the enclsoure Note: Nuts most…
Simple mount to hold buffer in a vertical position
This MMU buffer casette can stay in place during filament loading. Especially convinient if the spool you want to change, is located at one of the middle slots. The filament feeds right through and gets sorted automatically inside. No…
Upload per request. Simple remix of barspins design, resized for Lego rails (I believe, didn't test it on genuine lego tracks tbh). Should held itself on tracks by friction/tension.
This is a spring loaded alternative to the buffers I have used for my other Gauge 1 models. Salvage a spring from a ball-point pen and fit it to the buffer with a M2 screw. You need to drill out the screwthreads in the bufferbeams to…
you need 4x this part for my buffer plate holder https://www.printables.com/de/model/849129-mmu3-original-prusa-enclosure-buffer-plate-holder
In my 3D setup, the filaments are enclosed in airtight containers placed on a shelf above the printers. In this context, it's necessary for the MMU3 buffer to be connected to these overhead containers; this allows me to use the MMU3 in a…
I wanted to remove the part of the buffer holder that goes under the printer so that it could be mounted on the side of my enclosure.
This modified/kit-bashed buffer segmenter (front plate) for the MMU3 cassette buffer, in combination with @Melvin_131612's excellent MMU3 buffer mount allows the buffer to be mounted horizontally, lying down on its side. I made this…
2 Different mounts to fix the MMU buffer to the top or side of something such as a lack enclosure. Printed using default settings for PETG, .4mm nozzle and .20 Quality. Fix using 2x 30mm screw and 2x M3nS nuts
Simple snap-on top cover for the Prusa MMU3 buffer unit. Just purchased and assembled the MMU3 and have had great success with it so far but on a few prints, the filament comes out of the top of the buffer unit between color changes and…
October 2, 2024 - Modification Spool Holder 1 and 2 for MK4S With the arrival of the modified extruder in the MK4S, there was a problem that the new fan could hit the spools 1 and 2 on the right side. I solved the problem by modifying the…
After creating a replica from scratch for HPA there were some holes and unneeded things. So I fired up my CAD. I was in need of covers for the selector cap, charging handle and buffer tube. In addition the original dust cover is triped…
(SF bolt checked: works with the SF bolt ) a mount that makes it possible to install a metal buffer tube for the FGC-9 read more about it in the manual thanks to the help of someone that liked to help me out refining the AR Buffertube…
A drybox spool holder for printing with moisture sensitive filaments which can be used: -stand-alone -with a filament buffer -with the linear track rewind mechanism -with the universal or integrated spring hub rewind mechanisms The drybox…
BOM Besides the printed parts you need of course the: 6x 608 bearings 1x 5mm steel rod with a length of 135mm (+ M5 tap) or directly as threaded rod. 2x M5 nuts 6x Pneumatic connector with M6, M8 thread or Ecas (choose correct PatchWall…
Airsoft buffertube for AEG's and HPA rifles, length is 179mm so its printable on a Prusa Mini. No supports needed for printing, roughly 5-6 hours of print time, PLA+.
This is a completely tool & tape free mounting solution for the CFS buffer for the Creality Hi. It also includes a passthrough guide for the PTFE tube. This guide keeps the tubing straight to limit the scraping on the side of the PTFE…
A tool to easily disconnect the PTFE tube from the qidibox buffer. You no longer need to lift the buffer to expose the coupler. Just insert this into the hole where the tube is and push down to release the coupler and then pull the tube…
This is just a reupload from the official mellow docs as I had a hard time finding the files! @Mellow: If you want me to take down the model please contact me! I gave the parts meaningful names and tried to reorient the into a better…
I have had quite a bit of issues with the feeding of filament via the AMS while printing multi colour. The filament often gets stopped at the buffer area and then gets rewound. I played with it in my hand (taking it off the printer body)…
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
This MMU buffer is designed to mount in a Lack enclosure but it's adaptable to hang from anything you can put screws into. I feel it's vastly superior to the provided buffer and will remove a lot of your MMU woes. The general concept is…
I don't have easy access to the back of my K2 Plus, so I created a holder for the filament buffer. I can easily remove the buffer without having to remove the screws and then trying to insert the screws blindly. Use the screws provided…
This replaces the back cap for all Nerf blaster that accept the standard Nerf stock with a 6 position Mil-Spec style AR buffer tube adapter. Will accept real carbine AR stocks and most airsoft knockoffs. If you'd like you can buy me a…
This is an improvement on the excellent 5-Wheel Buffer for MMU2 design. The most significant improvements: Uses M10 PTFE tube quick fit connectors that prevent the tubes from sliding out. Narrower fit between wheel and arms, preventing…
