Search results: cabinet

Sort order

2,826 models

P
PrintablesCelta

Cabinet Door Pan Lid Holder (Adhesive Mount)

Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…

Downloads
925
Likes
449
Rating
4.88
P
PrintablesFloKun

TP-Link TL-SG1008P 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Downloads
416
Likes
41
Rating
5
P
Printabless17s05

SodaStream CO2 cylinder wall mount for kitchen cabinets

This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…

Downloads
268
Likes
99
Rating
5
P
PrintablesNABATES

Scrolled cabinet pedestal foot Corner

Scrolled cabinet foot Corner side 4" height 8" width

Downloads
88
Likes
21
Rating
0
P
PrintablesSchaffer.la

Cabinet Pull Drill Guide

a simple drill guide for standard 3 or 4 inch door and drawer pulls to aide in getting everything square and clean. Printed here in PET-G since it is a tool and may get exposed to heat. I made this for a bathroom installer.

Downloads
85
Likes
20
Rating
0
P
Printableshollebread

PHARMACOPOEIA SUPPORTIA: Medicine cabinet shelf bracket

This is a replacement for standard push fit medicine cabinet shelf holders. It is one of my favorite models because I think it really captures the ideals of 3D printing. One night I was awoken by a loud crashing sound from the bathroom.…

Downloads
73
Likes
19
Rating
0

Universal Cabinet Spool Holder

This is a spool holder made to attach to the top of a cabinet, it uses 4 "608" bearings for very low friction and high versatility in spool sizes. I'm using 20mm tube as an axle, but anything between 12 and 24mm should be fine. Print…

Downloads
71
Likes
7
Rating
4.5
P
PrintablesDAVE

IKEA SEKTION CABINET LEG TALL SET OF 4

My wife and I are tall people and needed a taller cabinet for our new kitchen cabinets from IKEA. So I created a taller tube for the IKEA plastic legs. If a shorter leg is needed the tops can be cut off in the slicer. no bottom caps are…

Downloads
69
Likes
5
Rating
0
P
PrintablesStanda

Bookmarks for doctor filing cabinet/záložky do lékařské kartotéky - stl, f3d

EN Simple bookmarks for medical records. Quick patient identification by alphabet. Easy printing. Easy colour change at 2.2 mm and 3.2 mm height. Downloadable f3d file to edit your own letter or size in Fusion 360. CZ Jednoduché záložky…

Downloads
66
Likes
25
Rating
5
P
PrintablesAsd Omega

Pivot bearing for shoe cabinet \ Drehlager für Schuhschrank

typical Satursday afternoon, after a nice shoping tour we build our new shoe cabinet. During the instalation of one of the drawers the first pivot bearing snaps during inserting the screw. "Hmm, maybe we can glue it" I thought - when my…

Downloads
63
Likes
5
Rating
5
P
PrintablesNABATES

Scrolled cabinet pedestal foot LEFT

Scrolled cabinet foot, Left side 4" height 8.25" width

Downloads
52
Likes
11
Rating
0
P
PrintablesDik Harrison

Tape dispenser for mounting on the side of a cabinet.

In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better. I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it…

Downloads
48
Likes
12
Rating
5
P
Printablestetralite

Craftsman Parts Cabinet Drawer Dividers

Large and small drawer dividers for 30- and 39-drawer cabinets. Fits these cabinet models: Craftsman CMST40730 and CMST40739 ArtBin 6830PC and 6839PC Stanley Tools STST40730 and STST40739 Black+Decker BDST40730FF and BDST40739FF FILES…

Downloads
41
Likes
7
Rating
0
P
Printables3DPrintM.D.

KitchenAid Corded Hand Immersion Blender Cabinet Hanger

This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…

Downloads
34
Likes
9
Rating
0
P
PrintablesLudo B

Handdoek droger voor keukenkast en badkamer. Towel dryer for kitchen cabinet and bathroom

Zo kan je handdoeken ophangen aan de kast deuren. Misschien moet je de dikte wat aanpassen voor over jouw deuren te hangen. Het binnen werk is wel in een flexibel materiaal geprint. This way you can hang towels on the cupboard doors. You…

Downloads
33
Likes
4
Rating
0
P
PrintablesJiří Štivar

Pant rozvaděče Siemens (Siemens cabinet hinge)

Náhradní pant pro staré plastové rozvaděče Siemens.

Downloads
32
Likes
1
Rating
0

FILING CABINET HANDLE - NO SUPPORT

Handle to a drawer filing cabinet, it breaks easily so this is a replacement, will try to reinforce it when I catch some time Fresh design, not a scan. Share, like, post a make… my other designs…

Downloads
31
Likes
2
Rating
0
P
PrintablesDoctaylor

IKEA Ställ shoe cabinet peg

Replaces broken or damaged ikea Ställ retaining shoe cabinet bracket pin peg. Printed at 45 angle with 5 layer walls

Downloads
26
Likes
3
Rating
0
P
PrintablesLukášKG98
Downloads
25
Likes
6
Rating
0
P
PrintablesSvabd

Joint for Outwell cabinet

A couple of years ago I broke part of a joint to an Outwell camping locker. I temporarily repaired it and now, thanks to a Prusa MK3S+ 3D printer and Fusion 360°, I've designed and printed a new one. I haven't installed it yet, it may be…

Downloads
25
Likes
1
Rating
0
P

Custom Arcade Cabinet Clock with Alarm

I'm a 2000s guy but when I think of the 90s the first thing that comes to mind are the stories my relatives told me about when they played with arcade cabinets. I decided to make this miniature cabinet model, adapting it to a slightly…

Downloads
22
Likes
8
Rating
0
P
Printableskenneyd

7-inch LCD Pi Display-H Flush/ Overhang Mount for Besta Cabinet

I bought a 7-inch “ Display-H ” from aliexpress to use as a display for my home assistant server monitoring dashboard, and then I made this mount to place the display on the inside of the server rack door, attached to the door frame so…

Downloads
17
Likes
4
Rating
0
P
PrintablesDr. Terra

RasPiO InsPiRing Glass Cabinet Illumination Holder

I have the RasPiO InsPiring Circle ( https://rasp.io/inspiring/ ) and wanted to use it to illuminate the glass cabinet in the living room. I created this small ring to elevate the led circle a little bit (as the contacts are below) and…

Downloads
15
Likes
0
Rating
0
P
Printablessteffanders

Ikea kitchen Rationell Corner base cabinet pull-out carousel

Description The former IKEA Corner base cabinet pull-out fittings from the series Rationell tend to sag under the weight of the pots. In my case, the front corner hung more than 7 cm lower than the center bearing, and the pots slid toward…

Downloads
14
Likes
6
Rating
0
P
PrintablesStringsIV

Top Shelf for Small Parts Cabinet with Recess for NHXX/7SXX Movement Holder

I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.

Downloads
11
Likes
8
Rating
0
P
Printablestom

Haken für Hängeschrank/ Hook for wall cabinet

Wir haben diesen Haken mit Tesa® Powerstrips Large (2 kg) unter einen Hängeschrank geklebt. Wir nutzen ihn, um einen Spritzschutz für Pfannen aufzuhängen. Es ist kein Support beim Druck notwendig, die beiden Teile werden einfach…

Downloads
7
Likes
0
Rating
0
P
PrintablesWONDERBREAD

Simplehuman compost caddy cabinet mount shim

The pocket of our cabinet is too small and made it so the compost caddy couldn't seat into the mount . This is a simple 5mm shim that sits behind the metal plate that is screwed into the cabinet to add more clearance to the mount.

Downloads
5
Likes
2
Rating
0
P
Printables3DFW

Doorstop for PAX cabinet

This was a very basic model created in Tinkercad to keep the door of my IKEA PAX cabinet open while printing PLA. Nothing special, but it was very quick to design and print.

Downloads
4
Likes
1
Rating
0
P
Printableseds_3d_shop

Wide Version of Bambu Lab Magnetic Purge Poop Slide for X1C / P1S (side collection of poop, perfect for cabinet!)

My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…

Downloads
13,609
Likes
735
Rating
5
P
PrintablesJosh Makeshift

IKEA KALLAX Cabinet doors

IMPORTANT In the current orientation, the door handles will snap . Please print them on its side and with supports to improve their strength. I designed and 3D printed cabinet doors for IKEA shelves. They don't require any screws, utilize…

Downloads
6,726
Likes
4,974
Rating
4.81
P
Printablesreavenk

Folding Drawers Mini-Cabinet

I've been experimenting with designing and printing thin, foldable sheets and thought of creating a small drawer organizer with the idea. Demo and assembly at https://youtu.be/KBI11ScuB-M The folded drawers end up with these "wing" like…

Downloads
5,681
Likes
2,570
Rating
4.78
P
PrintablesPopandsicle

Rock Climbing Hold Cabinet/Drawer Knobs (Small)

Want to progress your rock climbing prowess while completing simple household tasks? Transform your morning routine into a high octane test of endurance and will with a quick swap of your cabinet hardware. These cabinet knobs will add a…

Downloads
5,519
Likes
2,126
Rating
4.94
P
PrintablesMcLovin

Cabinet Door Spray Bottle Holder (no holes/adhesive)

Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…

Downloads
4,963
Likes
3,121
Rating
4.87
P
PrintablesAnimeted

Nintendo Switch Arcade Cabinet

Print yourself a neat Arcade Cabinet for the Switch.

Downloads
4,051
Likes
1,865
Rating
4.68

4U Cabinet Glass mount hinge (3mm)

Glass mount with hinge for broken or missing metal original bracket. Can be printed without support if printed the weaker way - Ironically it was designed to be printed the wrong way and now it can be printed that way without support ……

Downloads
3,857
Likes
27
Rating
0
P
PrintablesEpes.Rades

Removable Cabinet Door Organizer – Makeup & Bathroom Storage

Need more bathroom storage without cluttering your sink counter? This removable cabinet door organizer turns unused space inside your vanity into convenient extra storage. It’s perfect for makeup, skincare, cosmetics, cotton pads, hair…

Downloads
3,575
Likes
2,333
Rating
4.83
P
Printablesvivamus3d

Brother P-Touch Wall/Cabinet Mount

I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…

Downloads
3,194
Likes
81
Rating
5
P
PrintablesMarkus710

4 in 1 Multi-functional Electric Control Cabinet Key

4 in 1 Schlüssel für Schaltschränke und Industrieanlagen. 2x 4 Kant Schlüssel, 1x Dreieck und Schaltschrank Schlüssel. am besten mit 60% oder mehr Füllung drucken für Stabilität. 4 in 1 key for control cabinets and industrial plants. 2x…

Downloads
3,185
Likes
461
Rating
4.64
P
PrintablesGriffins

Cabinet Dinner Plate Rack organizer

This rack holds 8 plates of many sizes.

Downloads
3,184
Likes
700
Rating
4.94
P
Printableshuba

Universal Electrical Cabinet Key – 4 Way Utility Tool

This 4-Way Utility Key is designed for opening a wide range of electrical, utility, and service cabinets. The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians,…

Downloads
2,959
Likes
758
Rating
4.6

Desktop Mini Toolbox - Top Cabinet: 4 Drawer Edition

This model is a continuation of my Desktop Mini Tool Box project. There are multiple variations I have created for your favorite drawer configuration. Current configurations: 4 Drawer (2 full, 2 half size) Possible Upcoming…

Downloads
2,769
Likes
1,161
Rating
4.94
P
PrintablesWilko_SLO

Under Cabinet Cup Holder (Settable, Universal)

Designed to print z=0,2, PETG (100%infill) You can include 3 hangers if you have smaller cups. Print orientation without support:

Downloads
2,405
Likes
321
Rating
5
P
PrintablesJer

Cabinet Leveling Foot - Small

Update Aug 20 2025 In response to comments about the fit of the threads I am now including renders with increased thread tolerance gap. You can also make custom adjustments to the fit by editing the value of the ThreadToleranceGap…

Downloads
2,242
Likes
2,296
Rating
5
P
Printables3Dinfinity

electric cabinet key (triangle)

electric cabinet key (triangle)

Downloads
2,226
Likes
522
Rating
5
P
PrintablesMateusz Tokarz

18mm L-Corner Assembly Jig | Cabinet Clamp

BOM: Printed with ROSA3D Starter PLA Red Make your DIY furniture building and cabinet assembly much easier with this precise 90-degree L-corner jig. Designed specifically for standard 18mm thick boards—the most common size used in…

Downloads
2,032
Likes
709
Rating
4.67
P
PrintablesExtrutim

Elegant Furniture Leg | Cabinet Foot

I needed a few legs for a bathroom cabinet, so I just made something myself! If it isn't so well visible in the pictures, the leg is slightly angled. This leg has a height of 160mm , you can of course scale it a bit in Z but note that you…

Downloads
1,990
Likes
1,648
Rating
5
P
Printables8-Bit Designs

8-Bit Game Over - Fridge Magnet (Hot-Swap, Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |

A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…

Downloads
1,887
Likes
683
Rating
5
P

IKEA BLALIDEN / BLÅLIDEN Shelf Bracket Adapter for Glass Cabinet Repair Part 10087158 / 10082805

You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…

Downloads
1,716
Likes
64
Rating
4.67
P
PrintablesSporkLord

Cabinet Door Latch

Simple cabinet door latch. I made this to help keep a loose door from swinging open. It is easy to install, just mount the catch to the cabinet door frame, then mark the mounting point for the ball. If you need some wiggle room, I made an…

Downloads
1,712
Likes
421
Rating
4.92
P
PrintablesJanis M.

Aufbewahrungsbox Küche für Knorr Maggi und Co | kitchen cabinet box

Aufbewahrungsbox Küchen für Maggi, Knorr oder ähnliche Tüten. Die Box hat standardmäßig eine Breite von 17cm. Kann aber einfach mit dem Slicer deiner Wahl herunterskaliert werden auf die gewünschte Breite. :) 13cm breite für große Tüten…

Downloads
1,696
Likes
293
Rating
4.8
P
PrintablesMateusz Tokarz

18mm T-Joint Assembly Jig | Cabinet Clamp

BOM: Printed with ROSA3D Starter PLA Red Expand your 3D-printed woodworking toolkit! Following our popular L-corner jig, this precise T-joint assembly jig is designed to help you flawlessly connect intersecting standard 18mm boards at a…

Downloads
1,659
Likes
698
Rating
5
P
PrintablesManu

Cabinet Shoe rack

This 3 part shoe rack is for saving space in a cabinet/closet. The inner width of the model is 135 mm, the height at the front is 84 mm and at the back 175 mm. You need to print the right and left parts with support for the pins. The top…

Downloads
1,633
Likes
917
Rating
5
P
PrintablesEd Daniel

Corner brace for IKEA Besta cabinet

My Besta cabinets were anything but rigid. Aligning the doors on the front of them was next to impossible! So I whipped up this corner brace in Onshape. You probably don't need one on each corner. Even one makes a difference, but two on…

Downloads
1,567
Likes
245
Rating
5
P
Printablesaleung

Cabinet Door Latch

Safety lock latch to prevent young children from opening cabinets. Installation requires screws with a hole spacing of 40mm.

Downloads
1,548
Likes
505
Rating
4.9
P
PrintablesBugman_140

Rose Cabinet Pull

Here is the file for a Rose Cabinet Pull, this is designed to take a M4 Machine screw in the back face. obviously this would be best printed in Resin but can be printed in FDM too and still gives a nice effect. 👍 I hope you enjoy. Thanks…

Downloads
1,363
Likes
226
Rating
5
P
PrintablesBasementLAB

Grid Rack Panel 1U ventilation panel cover for 10 inch rackmount cabinet

Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…

Downloads
1,360
Likes
162
Rating
4.86
P
PrintablesWilko

Barbie sized Cabinet

This is a small cabinet I created for my niece. The design should have a clean look and should provide lots of space for the tiny pieces of her toys. I've printed four boxes because of ... space. As usual I've attached the Fusion 360 file…

Downloads
1,317
Likes
355
Rating
4.89
P
Printablesdmacnulty

Folding Under Kitchen Cabinet Fruit Hook (e.g., bananas)

Use Case : needed a durable hook which could hang produce from our kitchen cabinets and also fold out of the way when not in use. I wanted a hook which could hold heaavy bananas or tomatoes without fear of breaking. Components: Hook –…

Downloads
1,241
Likes
534
Rating
5
P
PrintablesMatsErik

Spice rack for wall cabinet door

I found nothing to my liking online - blender'd my own

Downloads
1,215
Likes
232
Rating
5
P
PrintablesWhat2Print

Drill Template Cabinet Door Hinge

Drill Template for Cabinet Door Hinge installation. This has the top and bottom templates. Template for a half inch reveal as the hinges are bought for that specific dimension. Drill holes ½" (12mm) deep, 1 3/8" (35 mm) diameter. Look at…

Downloads
1,191
Likes
266
Rating
5
P
Printableslewosh

Cabinet Hardware Jig

This jig is strongly inspired by the jig of the well known blue colored jig brand. Although they have the same properties, they are not compatible. This jig has built-in measuring scales and a adjustable edge guide for easy positioning.…

Downloads
1,136
Likes
391
Rating
4.67
P
PrintablesDane Buson

Cabinet shelf organizer

Modeled to be lightweight and relatively quick to print. Edited it to add some supporting beams to the legs.

Downloads
1,087
Likes
363
Rating
5
P
PrintablesJcsrf

Aquarium Tools Holder for Cabinet

This is a set of 3 parts, to double tape to your aquarium cabinet. It allows you to easily hold/access your tools. Printed mine in PLA, at 0.20mm with 0.4 nozzle

Downloads
1,082
Likes
226
Rating
5
P
PrintablesDrJones

minimalistic quick battery holder for 2/3/4/6/8/12 AA/AAA cells (e.g. attach to cabinet door; vase mode)

I intended this model to be mounted on the inner side of some cabinet doors (using double sided adhesive), which is most often some unused space, but easy to access. I also attached one on the inside of a drawer. Or attach 2 of them…

Downloads
976
Likes
248
Rating
4.82
P
PrintablesLyl3

Customizable Drawer Handle or Cabinet Handle

This is a customizer for creating arc shaped cabinet handles or drawer handles. There are two basic styles that can be created: cylindrical and spheroidal. The design is 3D-printer friendly: no supports are needed except for spheroidal…

Downloads
969
Likes
171
Rating
5
P
Printablesfloano

Modular organizer for kitchen cabinet doors

Customizable storage solution for kitchen cabinet doors. With a modular design, they can be combined to create a storage unit that fits specific needs, and adjust it as changes are needed. Each box is designed to fit securely into the…

Downloads
952
Likes
634
Rating
4.86
P
PrintablesStrayCat

Stable foot for Ikea Metod kitchen base cabinets

I get annoyed every time I have to deal with the Ikea Metod feet when setting up a kitchen. Every time I put them on at an angle, as well as every time I move them, the feet break off, if they haven't fallen off before. So I constructed…

Downloads
933
Likes
118
Rating
4.9
P
PrintablesKris Babic

Cabinet Door Mounted Straw Holder

This can hold multiple straws without them falling over. The bottom is open in case a straw is still damp when it gets put away. I used double died tape and it seems to hold up well. Time will Tell!

Downloads
907
Likes
197
Rating
5
P
PrintablesPrint N Play

The Arcade 4-2 3D Printable Arcade Cabinet

Video of the build All the parts bolt together using m3 bolts, but I also used a 3D pen to reinforce the joints. I've included the step file so you can see which parts go where, as well as to modify it using your own electronics. I only…

Downloads
889
Likes
106
Rating
0
P
PrintablesHoytDesign

Kitchen Cabinet Hanging Shelf, Spice, Medicine

I designed this shelf to add some additional storage space to our kitchen cabinets, for smaller spice and medicine bottles. I wanted something that didn't require drilling holes or double sided tape. The shelf has hooks that attach to the…

Downloads
882
Likes
535
Rating
5
P
Printables8-Bit Designs

Umbrella Corp. Logo w/ Slogan (Resident Evil/Biohazard) - Fridge Magnet (Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |

A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…

Downloads
877
Likes
167
Rating
4.8
P
Printablescecca_7

Record cabinet miniature

For the turntable knobs and the central pin I used a piece of 1.75mm filament, so if you print at 1:1 scale you don't need to print the knob file. But if you choose to change the print scale then you can print the knob file. Printing and…

Downloads
873
Likes
418
Rating
5
P
PrintablesGeo502

K-Cup under cabinet station

This K-cup under cabinet or shelf rack designed for a the Keurig k-cups. Installed with small wood screws under the cabinet, perfect size and keeps the kcups out of the way. Designed in sections of two to fit on my Ender 3 Pro and I ended…

Downloads
838
Likes
163
Rating
4.86
P
PrintablesElothan

Cabinet knobs for Bookcase doors - Fits IKEA Billy

I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…

Downloads
821
Likes
111
Rating
4.94
P
PrintablesRobagon3D

Cabinets for Gloomhaven

Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…

Downloads
782
Likes
115
Rating
5
P
PrintablesNate Marsh

Ryobi Battery Holder for Ryobi wall mounted shelf cabinet

Adjusted the hole size and countersink for M5 hardware and added a peg for more stability when mounting to the Ryobi 2 shelf wall mounted cabinet…

Downloads
766
Likes
135
Rating
5
P
PrintablesJacques Strauss

Under-Cabinet Paper Towel Holder

Basic paper towel holder designed for easy attachment under a cabinet using double-sided tape. Includes Fusion 360 file for customization. Scale only the X and Y to 98%, for the left and right pin, to improve tolerance of the threads.

Downloads
758
Likes
234
Rating
4.71
P
Printablesprusac

Cabinet Drawer Knobs (Assortment of 20)

Here are various drawer knobs, based on my own design or inspired by existing design. Since I couldn't hold myself and create only one knob, I let me creativity running wild and ended up creating 20 different knobs! Yes some are very…

Downloads
753
Likes
121
Rating
5
P
PrintablesJustin

Over-Door IKEA Cabinet Hook

We don't have a mantle to hang Christmas stockings on, but we do have a BESTÅ entertainment center in our living room. So, I made these hooks and used color changes to give them a holiday look. They ended up being so handy that I printed…

Downloads
748
Likes
77
Rating
5
P
Printablesvoidbubble

Hatter’s Cabinet (Trinket / Jewelry Box)

Do you keep forgetting where you've placed things? Is this driving you mad as a hatter? Try this magical cabinet solution today - or your insanity back guarantee! This design is generated from an array of squares whose vertices are…

Downloads
744
Likes
306
Rating
5
P
Printablesmislavcuze

Beautiful rose cabinet knob

Beautiful rose cabinet knob. This suprisingly looks good in person, especially in PLA Marble Grey by Prusament, awesome filament! Sadly, I don't posses red, so I created render for you to see how it would look like. The bottom has added…

Downloads
742
Likes
156
Rating
5
P
PrintablesElothan

Knurled Cabinet knobs

Some simple cabinet/drawer knobs. I added some knurling to give it a bit of extra grip and flair, in the same style I tend to use on other models . Attach them using a M4 Bolt/screw. It should, depening on your printers tuning, cut its…

Downloads
741
Likes
153
Rating
5
P
PrintablesYepher

Universal Lid Holder for Kitchen Cabinets Doors

A lid holder that mounts inside a kitchen cabinet door using Velcro command strips. Can mount multiple side-by-sides to allow for storing more lids.

Downloads
725
Likes
617
Rating
5
P
PrintablesPaul Grove

Cube Rack - 10" inch Network Cabinet / Server Rack

The CUBE Rack Cube-based network cabinet / racking system with many features: Build using Standard M6 Cage Nuts (no other non-printed parts needed!) Fits standard 10" network and server cabinet equipment Simple to print and build!…

Downloads
692
Likes
113
Rating
0

Desktop Mini Toolbox - Top Cabinet: 3 Drawer Edition

This model is a continuation of my Desktop Mini Tool Box project. There are multiple variations I have created for your favorite drawer configuration. Assembly instructions are the same as the original 4 drawer edition the only changes…

Downloads
679
Likes
316
Rating
3
P
PrintablesConny

IKEA Malm Cabinet Drawer Insert / Komode Schublade Organizer

About the model IKEA Malm drawers are around 70x42 cm. The drawer has been devided into a 6x6 cm grid leading to a total of 12x7 elements. Because of the square grid each insert can be rotated as needed. Elements are provided from 1x1…

Downloads
674
Likes
141
Rating
5
P
PrintablesDC

Child proofing cabinet lock

The stick-on cabinet locks my in-laws got me started coming off after our 2nd little one, so I decided to see if I could design one to my liking. Designed to be easy to print and with a small flat bit on the end for alignment. I suggest…

Downloads
673
Likes
71
Rating
4.75
P
Printableskai

The ultimate harbor freight sortimo rack cabinet

I think this is the best 'sortimo-like' storage rack available on the internet. It will fit 24 medium and 6 larger harbor freight storage cases. It's easy to build and very functional. The idea is directly to mount the storage case on the…

Downloads
663
Likes
351
Rating
5
P
PrintablesSnow

Simple Organizer Rack For Cabinet / Pantry

I have a lot of vertical space inside cabinets that is often wasted. With this rack I can stack things and more efficiently make use of that space: Things placed on top of the rack are easier to see and reach given that they're up high…

Downloads
652
Likes
218
Rating
4.33
P
Printables8-Bit Designs

8-Bit Single Digit Numbers - Fridge Magnet (Hot-Swap, Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |

A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…

Downloads
651
Likes
356
Rating
5
P
Printables8-Bit Designs

Offline T-Rex (Google Dinosaur Game) - Fridge Magnet (Hot-Swap, Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |

A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…

Downloads
646
Likes
239
Rating
5
P
PrintablesNealC

Amazon Echo Show 5 Under Cabinet Mount

I got the new Amazon Echo Show 5 for my RV/motorhome and as space is limited I wanted it off the counter and under the cabinet in the bedroom. I designed a mount that has a mesh back using PrusaSlicer's modifier mesh (.amf attached has…

Downloads
632
Likes
61
Rating
4.25
P
PrintablesBOM-Trace

Modular Storage Cabinet System by BOM-Trace

🌐 Website: bomtrace.com/printables/publish-1 Meet BOM-Trace - the modular storage system built for hardware startups and engineering teams who are tired of losing track of their parts. BOM-Trace is not just physical storage. Our software…

Downloads
626
Likes
177
Rating
5
P
PrintablesUenbzsto

Universal Customizable Euro Cabinet Hinge Drill Guide

Jig provides drill alignment for cup hole, door screw, and frame/carcass screw alignment. All major dimensions are customizable within OpenSCAD to the required dimensions of a hinge. Self-aligning dovetails allow for printing flat,…

Downloads
625
Likes
120
Rating
5
P
PrintablesNGTrainGuy

HO Scale Trackside Relay Cabinet

This is an HO scale (1:87) model of a typical American trackside relay cabinet used to house signal, switch, and crossing relays and electronics. This is a model that I made based on prototype dimensions. Approximately 3.5-4 scale feet…

Downloads
612
Likes
71
Rating
5
P
PrintablesTechSoft

Build Plate Holder / Sheet Holder Bambulab P1P / X1 - 3 & 5 Slots for Ikea Platsa Cabinet

Simple 3 and 5 build plate holder for Ikea Platsa Cabinet. Pre-drilled holes. Needed 20mm screws. Added two differents sizes, for 3 and 5 plates. And modified with holes design. Updated using internal pre-drilled holes on platsa. Printed…

Downloads
610
Likes
64
Rating
4.91
P
PrintablesRyan Rapini

Under-cabinet Cutting Board Mount - Free up some counter space!

I have extremely limited counterspace in my kitchen and I wanted to make the most of it, but we use our cutting boards every day and I didn't want them tucked away in a cabinet somewhere. These simple brackets allow you to hide them…

Downloads
609
Likes
508
Rating
5
P
PrintablesMarcin Bielecki

Hanger for Cabinet Doors / Simple Coat Hanger

Prosty wieszak na ubrania do wszystkiego, co kwadratowe. Szerokość wynosi 20 mm. Można skalować, aby dopasować do innych szerokości. Dwa rozmiary do wyboru: 65 mm i 95 mm

Downloads
589
Likes
82
Rating
5
P
Printablesloidolt

Twisted Cabinet Knob

Simple twisted cabinet knob. Intended to be printed in stainless steel filament from Proto-Pasta: ( http://www.proto-pasta.com/collections/retail/products/stainless-steel-pla ) These knobs along with my modern drawer handle model:…

Downloads
589
Likes
64
Rating
5
P
PrintablesArke

Electric cabinet key

Electric cabinet key

Downloads
580
Likes
43
Rating
5