Search results: canon

Sort order

1,092 models

P
PrintablesIng. Ákos

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
452
Likes
40
Rating
5
P
PrintablesOlivier Popiers

Rigidificateur de canon/bouteille pcp Carabine Hatsan factory

A imprimer en 0.2 avec supports Nécessite 2 vis M3x25 et deux boulons M3

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
10
Rating
0
P
PrintablesdeSteini

Canon Speedlite Flash Hotshoe Cover

Protection cover for Canon Speedlite series' hotshoe Successfully tested on: Canon Speedlite 430EX III-RT Canon Speedlite 470EX-AI Canon Speedlite 600EX II-RT

Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
27
Rating
5
P
PrintablesNominal Brand

Rear lens cap for Canon EOS EF and EF-S lenses

Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…

Downloads
2,466
Likes
495
Rating
5
P
PrintablesJP

Canon EOS Hot Shoe Cover

Hot shoe cover designed to fit Canon EOS cameras perfectly. A variant better suited for Canon FD cameras can be found here . Print Settings Resolution: 0.1 mm Infill: 100%

Downloads
2,125
Likes
233
Rating
5
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Downloads
1,957
Likes
270
Rating
5
P
PrintablesJohn Barton

Canon LP-E6 Battery Holders (More Sizes)

Added more sizes to Wojtek's LP-E6 battery holder. Should be able to print without any supports in the provided orientation.

Downloads
1,861
Likes
203
Rating
4.92
P
PrintablesJP

Canon EF 50mm F1.8 STM Lens Hood

A lens hood for Canon EF 50mm f1.8 STM lenses. Can be used both as as hood and as a protective case. Print Settings Resolution: 0.1mm Infill: 100%

Downloads
1,519
Likes
212
Rating
5
P
Printablessilviu

Canon EOS RF Rear Lens Cap

Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.

Downloads
1,465
Likes
126
Rating
4.91
P
Printablesthenickdude

Canon EF/EF-S lens mount

This is a printable model of the mount found on Canon EF/EF-S lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended) or another filament like PLA. This is…

Downloads
1,458
Likes
91
Rating
4.67
P
Printablesthenickdude

Microscope adapter for 2x macro photography with Sony A, E/FE, Canon EF/EF-S, M, RF, Nikon F, Z, Fuji X, Fuji G, M4/3, Pentax M42 cameras

When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…

Downloads
1,225
Likes
300
Rating
5
P
PrintablesGiwi

Canon Lens Hood 58mm

This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm

Downloads
1,152
Likes
118
Rating
4.91
P
PrintablesZiemniaczenka

M42 to Canon EF adapter

Proper clearance, lens orientation and flange focal distance. Tested with Helios 44M-4 and Beroflex 135mm F2.8.

Downloads
979
Likes
58
Rating
4.89
P
PrintablesDanielAlex

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Downloads
935
Likes
150
Rating
5
P
Printablesthenickdude

Rear lens cap for Canon EF

Rear lens cap to suit Canon EF and EF-S lenses. Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament: Plasty Mladeč PLA Black Slicing settings: Perimeters: 2 Seam position: Random The cap has three internal flanges which…

Downloads
918
Likes
82
Rating
4.91
P
PrintablesElsni

Canon FD body cap

This is a printable body cap for FD mount Canon cameras, such as the T50, T70, T90, F1, A1, AE1 and others… I modeled this cap after an existing cap. The print is not quite so simple, as the guides for the bayonet catch have a slope. I…

Downloads
858
Likes
38
Rating
5
P
Printablesmoebio

T-ring T2 adaptors for Canon EOS for telescopes

T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.

Downloads
854
Likes
63
Rating
5
P
Printablescolinhalebrown

Canon EF Lens to Sony E-Mount Body

Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.

Downloads
821
Likes
28
Rating
0
P
PrintablesChrisE

Lens Cases for Canon EF-M / Canister Set

Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…

Downloads
771
Likes
198
Rating
5
P
PrintablesFilmTeam

Canon body cap / cover for EF / EF-S

### UPDATE! Now the text is in correct horizontal orientation Hi, this is a cap/cover for Canon's camera body with mount ef / ef-s Print settings: Layer height: Any, I used 0,2mm Material: Any, I used PETG Supports: Yes, only on build…

Downloads
727
Likes
49
Rating
4.75
P
Printablesesox

Canon EF-S 18-55 Hood

This is a hood for Canon kit lens. Three models are included, rounded hood, petal hood and a base that you can use to design your own model. f3d file is included.

Downloads
724
Likes
57
Rating
4.67
P
PrintablesJohn Barton

Canon LP-E6 Battery Gridfinity Storage

A convenient way to store up to 5 Canon LP-E6-style batteries on a 1x3 Gridfinity plate. Related model for the LP-EC Canon Charger .

Downloads
708
Likes
100
Rating
4.83
P
Printablesjhobson

Canon RF adaptor

We have templates for both male and female pairs of the RF mount. They fit my camera and lenses without further modification. Having done this, I belive it is possible to have a mount that fits both RF and EF - you just have to cut a bit…

Downloads
700
Likes
39
Rating
0
P
PrintablesEcho116

Canon LP-E6N Protective Battery Cover

If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…

Downloads
690
Likes
94
Rating
5
P
PrintablesVisceral3D

Canon Tripod Mount

A connector piece between your Canon camera and your tripod. Incase you loose it or if you need a replacement piece. Made in Fusion 360

Downloads
687
Likes
117
Rating
4.75
P
Printablesneoyarus

Canon RF 50mm F/1.8 STM Lens Hood

Main features: Stairstep pattern on the inside to further reduce flaring (mimics the original, was a pain to model) Clicks when fully twisted onto the lens Can be put on backward for storage and trasport Has the same markings for…

Downloads
679
Likes
85
Rating
5
P
PrintablesJB

Canon EF to M42 mount converter

Thanks to the linked makers I was able to merge them and to create this EF to M42 lens adapter. It works well for me but it is possible to improve it. If you printed the design you have to drill a hole at the spot where a camera lens…

Downloads
672
Likes
43
Rating
0
P
Printablesgrizzie17

Canon EFS 18-135 Lens Hood

The Canon EFS 18-135 Lens is a very good lens, but it does not come with a hood. I tried several different models that others had posted, but none seemed to fit the bill, so I made my own. This model is reversable so it will store well.…

Downloads
632
Likes
80
Rating
4.25
P
PrintablesZiemniaczenka

Canon EOS Hot Shoe Cover (flash working)

Remix of "A hot shoe cover designed to fit Canon EOS cameras perfectly." by JP that does not block internal flash.

Downloads
622
Likes
64
Rating
4.44
P
Printablesadp97

T-Ring adapter for Canon (1.25" and 2" ) for telescope

With these files you can now directly attach your camera as a normal observational eyepiece, just tighten them in your 1.25" or 2" eyepiece holder. NOTE: If it doesn´t fit well for your telescope, maybe you can play with the tolerance of…

Downloads
602
Likes
38
Rating
4
P
Printablesmartinmunk

Canon EF Extension Tube v1 - 50mm

This part is designed to be printable without any support material. A well adjusted printer is necessary fo a tight fit. Extension tubes are mainly used to reduce the focus distance of a lens for macro photo. The sample photos are taken…

Downloads
567
Likes
53
Rating
5
P
Printablestwothingies

Long lens hood for CANON EF/EFS - 58 mm ø lenses

A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. The stepped inner surface improves light-blocking performance. Compatibility This…

Downloads
566
Likes
60
Rating
5
P
PrintablesBMdesign

Lens Cap Holders for Canon, Nikon and Sony DSLRs

The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…

Downloads
548
Likes
128
Rating
5
P
Printableswhomst

Canon RF to EF mount Tilt Shift adapter

This is a fully printed canon RF body to EF lens Tilt adapter. It allows you to create the “tilt shift” effect with any EF lens. It will also work with any EF body to other lens adapters, I've personally used Nikon F mount, Olympus OM…

Downloads
528
Likes
127
Rating
4.67
P
PrintablesMateo Van Damme

Battery holder for 2 Canon LP-E17 batteries

I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.

Downloads
516
Likes
51
Rating
4.4
P
PrintablesScooberDiver

Canon EF+RF rear lens cap

This is a rear lens cap that fits Canon EF and RF series lens. Print with supports enabled for the benefit of the three screw segments (I'm not sure what to call them).

Downloads
513
Likes
54
Rating
5
P
PrintablesM.F7120

Canon R50 or R100 Grip - Remix

Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…

Downloads
510
Likes
33
Rating
5
P
PrintablesPaťas

camera view finder/eyecup for canon

fits well on my canon 80D but it should be compatible with all these too - 450D 500D 550D 600D 650D 700D 750D 760D 800D 77D 100D 1000D 1100D 1300D, EF Rebel T6s T6i T6 T5i T5 T4i T3i T3 T2i and more printed in one piece with PET-G (for…

Downloads
501
Likes
41
Rating
4.83
P
PrintablesZiemniaczenka

Sony E to Canon EF adapter with lens lock

I added alternative lever that uses M2x5mm (or longer cut to size) screw as a locking pin, it may scratch your lenses but is stronger and more reliable. To secure the screw in the lever you can use some leftover plastic from…

Downloads
493
Likes
52
Rating
5
P
PrintablesEmpiricus

Canon FD to RF adapter

Canon FD to RF adapter. Printed in two parts. Wet sand with 400 grit so that you get exactly 22mm height. 3x10mm M2 screws and glue in place when all fits well. Printed in CF-PETG (Atomic filament). 3 perimeter 5 bottom and 7 top layers…

Downloads
486
Likes
50
Rating
5
P
PrintablesDer.Hubi

Mario Style Canon Piggy Bank

Hi there. Here you are! An Mario Style piggy bank with a canon on top, inspired by Nintendo's WII Super Mario Bros. Level-Canon. The canon can be rotated and tilted. The piggy bank is also available in smaller scale, adjusted for IKEA…

Downloads
469
Likes
194
Rating
5
P
PrintablesNebukadNezzar

Canon EF / EF-S Rear Lens Cap (with Canon Logo)

An easy-to-print rear lens cap for Canon EF or EF-S lenses with Canon logo and orienation mark. I tried several models, this fits very well and looks pretty much like an original cap. Prints well in either orientation. Tip: If you happen…

Downloads
465
Likes
37
Rating
5
P
Printablestwothingies

Short lens hood for CANON EF/EFS - 58 mm ø lenses

A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. Check out our growing collection of 3D printable designs for Photography ! Follow us…

Downloads
456
Likes
36
Rating
5
P
PrintablesOzRocky

Canon Speedlight Grid

I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…

Downloads
452
Likes
114
Rating
5
P
PrintablesSteph ANTHONY

lens adapter canon EF to pentax K mount

preferable to print with the EF side down.

Downloads
447
Likes
40
Rating
5
P
PrintablesWivry

Canon lens hood 50 mm

The sun protection (lens hood) for Canon 50mm and 18 - 55mm Classical lenses have 3 hooks for conection, this thing has only 2 hooks for conection You may also liked some of these projects: https://wivry.gumroad.com…

Downloads
437
Likes
105
Rating
4.33
P
PrintablesTom

Battery Cover Canon LP-E17

This is a cover for canons LP-E17 batteries. It should fit batteries for EOS RP EOS M6 Mark II EOS 850D EOS 250D EOS 200D EOS M6 EOS M3 EOS 760D EOS M5 EOS 750D EOS 800D EOS 77D Please see also my GoPro 9 or 10 batterie cover .

Downloads
426
Likes
58
Rating
4.92
P
Printables8ball

film door latch for Canon EOS 50/50E (Elan/55)

This is a replacement part for the film door latch of the Canon EOS 50/50e. It is modelled after the original part that broke (view images). I printed it in PLA. Might need some sanding afterwards because it is a very thin part and can…

Downloads
425
Likes
16
Rating
5
P
PrintablesMachvolum

Canon EFS 55-250mm lens hood

Couldn't find any decent Canon EFS 55-250mm lens hoods that actually fit and locked, so. I made this. It may have to be scaled how you see fit, but it fits for me and it works. So, I'll share it lol I printed it with Prusament petg and no…

Downloads
421
Likes
47
Rating
5
P
PrintablesKaarel Pärtel

Canon EF/EF-S parametric extension tube

This is a simple tube extension for the Canon EF and EF-S lens mount. The length of the tube can be changed with a Fusion360 parameter. The Fusion360 project also makes use of the ParametricText addon to emboss the text on the side. The…

Downloads
420
Likes
76
Rating
4.25
P
Printables3DPrintGeneral

Canon Lens Back Cover

This was my first ever attempt at designing in Fusion 360. Further tweaks may be required to be a perfect 1:1 replica - but it does work.

Downloads
419
Likes
63
Rating
5
P
Printablesfabiankirchen

MultiAlign RF Rear Lens Cap for Canon RF mount

This is a rear lens cap designed to fit the Canon RF mount in three positions. The cap fits standard lenses as well as weather sealed L lenses. It also fits EF lenses. I have included svgs to label the caps so you can quickly see what…

Downloads
419
Likes
41
Rating
4.8
P
Printablesfhartmann

Gegenlichtblende für Canon EOS R10, 18-45mm RF-S Mount

Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…

Downloads
407
Likes
43
Rating
4.8
P
Printablesukwebb

Canon Selphy CP900 4 x 6 Postcard Paper Cassette

I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…

Downloads
395
Likes
16
Rating
5
P
Printablesnoname

Eyepiece for Canon EOS

I love loosing small things, that's why I often have to rebuy stuff. But not anymore since I got my printer… This model sits very tight onto the camera, so there is no way of loosing it again. Printing instructions -print it upside down…

Downloads
395
Likes
93
Rating
5
P
PrintablesByTopein

Clash royale Canon

This is a mini version of the canon from ClashRoyale which can be used to shoot low range objectives. With the only need of a pen spring and a BB you would be abble to have fun shooting whatever you want. Not a powerful gun but it could…

Downloads
394
Likes
40
Rating
4
P
PrintablesLuXXus

Canon Lens Hood compatibility proofed with Canon RF 100-400mm F5.6-8 is USM / ET-74B Equivalent

Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…

Downloads
394
Likes
34
Rating
4.67
P
PrintablesJoar

Customizable Canon EF mount

This is a printer friendly customizable Canon EF mount design with a f3d file. On its own there is no practical use case for the part, but possible modifications could be: adding threads to the inside or outside to mount your camera to a…

Downloads
381
Likes
29
Rating
5
P
PrintablesSigurd2

Canon EOS R7 Extension Grip

Extension Grip for Canon EOS R7 Suitable bolt: Hex head UNC ¼" x ¾" Tested with 100% infill and “stiff” PLA

Downloads
368
Likes
36
Rating
5
P
PrintablesVasilii

Canon RF 100-400mm F5.6-8 IS USM Lens Hood

A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…

Downloads
368
Likes
28
Rating
5
P
PrintablesNeumo

Canon AE-1 Program Textured Grip

This model is split into two pieces for easier printing. After printing, the small back piece should be glued into the recess. The finished grip is held in place with a M3x8 screw.

Downloads
366
Likes
58
Rating
5
P
Printablesdjedi

Slide Duplicator for Canon DSLR

Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…

Downloads
365
Likes
153
Rating
5
P
PrintablesTDK3D

Camera strap quick-release clips (Tested with Canon EOS M50 + Nikon D3500)

A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…

Downloads
360
Likes
82
Rating
4.83
P
Printablesbanderies

Canon FD Mount Lens Cap

Cap for Canon FD style lenses (https://en.wikipedia.org/wiki/Canon_FD_lens_mount). This covers the LENS part of the FD mount, NOT the camera body mount. There were other models for this on Printables but none I saw had appropriate tab…

Downloads
351
Likes
18
Rating
5
P
Printablesjdflute

DESTINY 2 IKELOS HAND CANON

All new model with some tight tolerances. You'll need some two core wire, a couple of cable ties and pins for the trigger, winglets, and breach pin. Add a small spring to the trigger and a tiny bit of compressible foam to the breach pin…

Downloads
350
Likes
156
Rating
4
P
PrintablesWojtek

Canon LP E6 batteries holder 2 pack

I remixed rogersoh holder to have a smaller version of it Category: Camera

Downloads
349
Likes
24
Rating
5
P
PrintablesJakub Pelc

Canon FD to EF mount change

This model should allow you to convert your old Canon FD lenses to the more modern EF mount. This model has been specifically created for Canon FD 135mm f/2.5, and may need further adjustments if you wish to convert a different kind of…

Downloads
346
Likes
24
Rating
0
P
PrintablesJones1403

Canon EOS Clip in filter holder for 1.25" Filters

Easy to print. Has no internal threads, so it might be a bit difficult to screw in the first filter

Downloads
341
Likes
25
Rating
5
P
Printablesecho

Canon Lens Cover Holder

Canon lens cover holder for 52mm and 58mm Print instructions Print it in 0,1 resolution. No supports are needed.

Downloads
340
Likes
67
Rating
5
P
PrintablesRob1

MILITARY LEGO lego compatible canon PAK 40 german Anti‑Tank Gun WW2

J'ai utilisé le model sur Thingiverse 8cm PAW-600, par Julian-Silvestri

Downloads
339
Likes
30
Rating
0
P
PrintablesIgoreveech

Canon EF to Fujifilm X adapter

Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…

Downloads
339
Likes
32
Rating
5
P
PrintablesFilmTeam

58mm Canon lens front cap

Hi, I was in need for a few lens caps and as I didn't have any I modelled them. And after few iterations I got them working quite well. Enjoy and protect your lenses! Cap is a print-in-place model, so a good tolerance is needed Supports:…

Downloads
328
Likes
26
Rating
5
P
PrintablesJohn Barton

Canon LC-E6 (LP-E6 Charger) - Gridfinity

A 2x3 Gridfinity-compatible LC-E6 organizer. I also put “LP-E6” text below the charger to help identify what kind of battery it charges. The model has cutouts to make the charger easy to grab from the top or sides. Related model for…

Downloads
328
Likes
73
Rating
4.5
P
PrintablesFloridaMan999

Canonreo

Due to popular demand here is the Canonreo Caps! Still work in progress though. Recently got a 3D printer and came up with this idea after printing a bunch of fidget for the kids. Initially printed with raft with cookie side down but…

Downloads
325
Likes
77
Rating
5
P
PrintablesEmpiricus

Screen hood for Canon R5

Just a hood for the screen of the Canon R5. May fit other cameras with a screen size of 60x84x7.5mm. 61.4 and 61.6 wide versions to accommodate for different filament shrinkage and less calibrated printers.

Downloads
318
Likes
71
Rating
4
P
PrintablesOmega-TI

Minolta AF to Canon EF Lens Adapter

I no longer use my Minolta Maxxum 7000 because it's a film camera. If you are like me and have a substantial investment in AF lenses that you want to put back into service for your newer Canon that uses EF lenses, this is an awesome and…

Downloads
316
Likes
19
Rating
0
P
Printableskevsparky

Canon Lens Back Cover

A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…

Downloads
315
Likes
57
Rating
5
P
Printablesandrepadua

Canon LP-E6 Battery Rugged Box (3, 4 and 6 Bat Variants)

Store your Canon Camera batteries for Travel or organization! Choose the right box for the number of batteries you wish to store, and choose the proper fill for your use - there is a fill for batteries with Caps and a fill for batteries…

Downloads
315
Likes
71
Rating
5
P
PrintablesSkovik

CANON 25 Backshell, DB25 Cover for connector

Backshell for Canon 25 connector (LPT, COM, etc). Krytka pro konektor typu Canon 25. Print instructions Backshell for connector Canon 25 (DB25). Used for LPT or COM - 25. Three versions, for cables: ø = 5 mm ø = 7 mm ø = 9 mm Fasten…

Downloads
300
Likes
9
Rating
5
P
PrintablesJGDenver

Canon RF Lens cap

(Remixed) redrafted from scratch with looser tolerances.

Downloads
298
Likes
32
Rating
4.75
P
PrintablesSnafky

Canon 15-85mm lens hood (EW-78E)

This hood is SIMILAR to the EW-78E. Please note that I did a remix of a lens hood that I found online. I only resized the inner circle to match the diameter of the 15-85mm lens of canon. I still had to do a little bit of sanding here and…

Downloads
293
Likes
29
Rating
4
P
PrintablesNolan O'Connell

MACRO Dispolens canon EF mount

This lens only works at really close focal ranges and has a small aperture. Great for vintage macro shots though!

Downloads
293
Likes
14
Rating
0
P
Printablesshirtman

Canon RF 35mm f/1.8 Macro IS STM Lens Hood

Canon RF 35mm f/1.8 Macro IS STM Lens Hood. Two styles. Full and tulip. • Snaps on and holds tight. • Reversible so you can store backwards on lens. • Access tabs on either side in case you need help removing. I suggest using a soft…

Downloads
285
Likes
33
Rating
4.75
P
PrintablesJoel

Canon EOS APS-C Clip-in Filter 1.25" Converter

Remove the 27.5mm Glass from the original 1.25" housing and pressure fit into the camera clip-in filter. Confirmed working with SVBony UHC and CLS filters. Can be used with EF-S Lenses with wide angle astrophotography or used in…

Downloads
285
Likes
21
Rating
0
P
Printables3D Senju

Canon Lens Container and Pen Holder

This is a container made to be a 1:1 replica of a canon EF-S 18-55mm lens. I have made it so that the 125% scale version has more details than the 100% scale because of the size and resolution. All of the white text has been paintet on…

Downloads
278
Likes
73
Rating
5
P
Printablesdanec

Canon lens cap

This 3D model is designed for a protective lens cap specifically tailored to fit the Canon EF 50mm lens. Once printed, it offers a snug fit to safeguard the lens from dust, scratches, and other potential damages. Printed on Prusa MK3S+,…

Downloads
272
Likes
25
Rating
3
P
PrintablesWim V

View Finder/Eyecup for Canon EOS2000D

The original viewfinder has the same clamping mechanism. I added a bevel on both sides to make it fit because the width of the viewfinder is a little sunken into the body. Printed with layer height of 0.15 (first layer 0.2) using tree…

Downloads
272
Likes
33
Rating
4.75
P
PrintablesDolores Bitty

M42 - Canon EF adaptor (with automatic aperture pin ring)

Never quite saw a good M42-EF adaptor which actually HAD some way of using automated aperture lenses with, so I updated this design! The already found bayonet mount isn't brilliant, so I suggest you file down the edges of the bayonet and…

Downloads
270
Likes
22
Rating
5
P
PrintablesTDK3D

Canon LP-E12 battery case (1-4 slots)

A simple case for LP-E12 batteries, used by the Canon EOS M50 for example. It can hold 4 batteries which should fit snugly. You can see a timelapse of my print here: https://youtu.be/Xd44k17qnrE

Downloads
267
Likes
26
Rating
4.67
P
PrintablesCarson Miller

Canon FD/FL lens to Canon RF camera adapter

A simple adapter to adapt Canon FL/FD mount lenses to a Canon RF Camera. Has the correct flange focal distance correction (22mm difference between FD and RF) and alignment marks for easy installation (the picture shows a slightly old…

Downloads
263
Likes
20
Rating
5
P
Printablesnamakan

Gridfinity Canon RF Lens Bin (16mm 50mm 24-105 f/4 L)

I didn't see any lens bins for gridfinity for these smaller Canon RF lenses so I modeled simple 2x2 bin for them. It's designed for and tested with the Canon RF 16mm F2.8 STM and RF 50mm f/1.8 STM lenses, but it should work for any lens…

Downloads
257
Likes
48
Rating
5

Medieval Canon

Another in the series of medieval models , this time as a Medieval Cannon as a Philips OneBlade holder. I wanted to make such a cannon for a long time. I'm glad that I learned how to make a texture on the surface of the model - wood…

Downloads
256
Likes
143
Rating
5
P

Canon 18-55 STM lens Hood

Better Fitting for 18-55 STM, may fit original 18-55 but not sure as i just own the STM version V2 is a bit smaller if your tolerances are good use this one Tested on a A1 mini

Downloads
256
Likes
23
Rating
0
P
PrintablesHackinistrator

canon EF 50mm STM lens hood

due to different tolerances between printers , adjust scaling per your results (too tight or too loose)

Downloads
256
Likes
45
Rating
5
P
PrintablesJunrong Lu

Canon EF Mount STEP File

Step file of Canon EF mount. You can use it to do your own project

Downloads
254
Likes
16
Rating
0
P
PrintablesGuax

Canon New F-1 Replacement Bottom Caps

This is a collection of 3d printable caps to replace the metal ones on a Canon New F1 WARNING: THE PLASTIC PARTS ARE FRAGILE, YOU NEED TO SCREW THEM IN GENTLY WITH THE LARGER TOOL YOU CAN FIT. Otherwise, you'll have to dig plastic out of…

Downloads
245
Likes
14
Rating
5
P
Printableschrisnupp

Canon 50mm F/1.8 Rectangular Lens Hood

This lens hood is designed to twist lock onto the Canon EF 50mm F/1.8 Lens. Printed in PETG at 20% infil, NO Supports. From another user: “Scaling it to X:94.2 Y:94.2 Z:96. It will be a perfect fit for RF50mm.”

Downloads
244
Likes
41
Rating
0
P
Printablesclemon8

GridFinity Canon LPE17 Batteries holders

About the Canon LPE17 Batteries Holder: This is a simple Gridfinity bins collection adjusted to fit very precisely the Canon cameras batteries LPE17. Variations: 1x1 (2 batteries) 1x2 (4 batteries) 1x3 (6 batteries) 1x4 ( 9 batteries)…

Downloads
241
Likes
18
Rating
0
P

Bahtinov Mask for Canon EF 75-300mm with ET-65B

Bahtinov Mask for Canon EF 75-300mm with ET-65B

Downloads
241
Likes
17
Rating
0
P
PrintablesZCraftworks

Canon Camera Battery Cover

Fits a Canon LP-E8 battery pack. and some off-brand replacements. Pictured with one of the original covers (yellow). I have a Rebel T3i, but this will work for any camera that uses an LP-E8 battery pack (Rebel T5i, T3i, T2i, T4i, EOS…

Downloads
240
Likes
54
Rating
5