Sealant/Silicon Cartridges Cap
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
- Downloads
- 808
- Likes
- 86
- Rating
- 4.77
171 models
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
These holders har small and thin on purpose so they are cheap to produce in large quantities. If you need a big and very solid product - this is NOT it. But the will hold up to normale use just fine. Hope you like it.
This is a print in place case with magnetic closing to store small items. The design uses an optionally printed inlay tray that holds Nintendo Switch game catridges and SD cards. Bill of Material (BOM) You will need some magnets for the…
My daughter struggles with all the loose ink pen cartridges in her bag, so I designed a compact storing solution for them. Use an M3 screw (12mm max length) and two m3 serrated lock washers to screw the 3 parts together. Align the cap…
This is a storage box, to store 50 22LR cartridges. The box is a very simplistic design, but it incorporates a smart layer, that will elevate every alternate row of cartridges such that it becomes easier to pick the cartridges from the…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you .308 Bullets. Created according to the original. It prints really well. You need to use supports! If you are interested in my work, the links are here:…
Thwomp Switch Cartridge Case up to 16 cartridges. It's a remix of https://www.thingiverse.com/thing:2648592 only need support for mouth
Model dimensions are 145mm x 100mm x 19mm. It fits 14 DS/3DS game cartridges, with 2 slots for DS Lite or 3DS. The handheld slots are the same dimensions, which allows just a little lateral wiggle room for a DS Lite, but fits comfortably…
Based on Pitel's design for storing 9 caulk cartrigdes / tubes or similar. Changed to horizonal storage and to be printed in a pair. Thickness changes from the original 51mm to 18mm, which seems strong enough. Added 4 wood countersunk…
Game cartridges of Nintendo Switch are small. I misplaced them from time to time. Hence, this project is developed. The objective of this project is to design an easy to use storage device. Among all form factors, I choose the form of a…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 7.92 x 57 Mauser cartridges. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Based on the model released by Apoc4lyptyc here on printables Top portion holds 15 Nintendo Switch carts Bottom portion holds 9 Nintendo 3DS/DS carts This is an original model, but wanted to make sure people could easily find the…
Fix Build Explore created a wonderful Packout insert to hold a P-Touch D610BT and TZ-e tapes. This is a secondary case to go in a second Packout case to hold extra TZ-e tape. This has three rows to hold many more cartridges. The insert is…
One of the options for the [Printer-Box] is a HEPA filter setup. It's designed around some commercially available filter media that simply slides into the slot. I wanted to design up some frames that could hold some of the filter media I…
Gameboy and gameboy color game cartridges in their protective shells make a great display piece. So I built a little shelf a couple of years ago. This is the 3D printed version. Printing There is no need for any support. Choose the layer…
My first design. It is a Shelf for Brother Labelmaker Cassettes (TZ-E) about 14 hour Print with 10 Percent infill and the fast Prusapreset (The Gcode was sliced with cura) for inside Dimensions look at the Pictures.
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
Could be useful for some cosplay. Modeled using publicly available dimensions. If you will print this model, please post a make. Thanks!
This is a simple bolt-action pen that utilizes the Pilot G2 ink cartridges. You can make it single-color, or add an accent strip in the middle. The halves connect with a bayonet latch, which should be easier to print than standard screw…
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
A barrel-themed game holder with a wave-like display action. Includes a hidden second compartment that can be accessed by disassembly. Print No supports required. Moving parts require a sufficiently smooth surface to slide without…
Print the cartridges at whatever setting you like. The ones pictured were printed at .16mm layer height for improved curves. A Mouse-ear brim in the corners may be necessary to prevent the corners from warping. For the HueForge prints: I…
A remix of the model for closing a silicone tube, which is practical, has a more profiled seal and all edges have been r
---Zur deutschen Beschreibung geht's weiter unten!--- Gameboy cartridge stand - fully customizable! I was looking for a stand for my beloved Gameboy cartridges . Here I came across Liartes' work, which I based myself on. When I went to…
Do you have too many video games and boring walls!? Then you have come to the right place! This wall mount rack is designed specifically for N64 games with the bottom piece being branded (whether you can do multi-color or single color…
These caps will protect opened cartridges so they wont dry out. There are at least two different threads used for this kind of canisters: For aluminium canisters M15x1.5 Plastic canisters with an unknown odd thread that UNC 5/8-12 will…
Recommendations for printing: material: PETG layer thickness: 0.2 mm supports: prohibit for text Non-printing parts: 6 screws 3x30 mm foam 130х90х10 mm More information on my Telegram channel: https://t.me/my3dguns Рекомендации по печати:…
Présentoirs de 10 jeux NES Modèle “Lisse” ne dispose pas d'écriture 0.8 et 1.6 sont les millimètre d'extrusion des caractères. Les 2 fichiers lisse (original).SLDPRT et fin 0.8 (original).SLDPRT sont les originaux pour d'éventuels…
See the writeup here: http://epicbeardquest.blogspot.com/2024/02/a-410-shotshell-in-44-magnum-rifle.html These are shotshell caps for pistol cartridges. They are intended to be used with a cardstock base wad or one of the wads provided…
A small tray, holds Luster pods, 510 cartridges and a CCell Palm vape.
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
Storage box for 20x Gameboy & Gameboy Advanced Cartridges Simple storage box with hinged lid. Holds 20 cartridges, either original/color or advanced. Has space between the cartridges to allow for easy access. To connect the lid just feed…
This wall mount rack is designed specifically for NES games with the bottom piece being branded (whether you can do multi-color or single color prints) for Nintendo Entertainment System. Print 1 pair of brackets per cartridge you want to…
I designed this filter so that I can use charcoal pellets on my K1. The ventilation grid is optional and can be disabled (set parameter vww to 0 ), so that you can use filter cartridges of any size and brand. I'd suggest to print this…
Note for non-Russian users: PU-4 is a launcher for special pyrotechnic cartridges that are used to send emergency and information signals. In the Russian Federation, PU-4 is not a weapon, does not require a license. If PU-4 is illegal in…
Remix of the SNES (PAL & NTSC) and N64 cartridge holder with flip option made by @PawelN_302162 The provided 7 cartridge model was too small for my needs, so I modified it to a 13 cartridge holder. Then I figured: Why not provide…
I love the quality of this chest modeled by Aardimus , but I wanted to increase its size to fit more games.
Stand to hold your 510 vape battery, charger, and up to 4 additional cartridges. Recommended Print Settings: Layer Height: 0.15mm
Cartridge Holder for up to 8 Nintendo DS and 3DS cartridges. Print instructions Category: Video Games
Do you have too many video games and boring walls!? Then you have come to the right place! This wall mount rack is designed specifically for Super Nintendo Entertainmente System games with the bottom piece being branded (whether you can…
Made out of PETG this rugged box holds 100 cartridges of 9mm. There's a 5mm thick foam added to the lid to prevent cartridges from rattling.
Use nitrated tissue or flash paper. For the clamps use .050in wire ( see my hazard cartridge page they are the same) Use pvc or pex pipe for the mandrel handles. A video for how to make them
This will store 12 Insulin Pens, 5 3m pen cartridges and 2 3ml vials. These are common sized with Insulin and Peptides. The Pen slots will hold many different brands of pen. This is supplied free, and do not give permission to sell…
I have printed a bunch of supports according to the model made by Kerndrup (to whom I thank once again) but the top part breaks very easily. In order to make it more durable without exaggerating the consumption of the material, I remixed…
Remixed from Kadah's "Parametric SMD Stacking Magnetic Mini Spools" on Thingiverse: https://www.thingiverse.com/thing:4609897 I resized the spools to hold 1000 0603 SMD components, and made a dock for them to clink into. Magnets…
Needed a sealant cap without o-ring. Seals by having in internal cone that wedges securely into the cut hole in the cartridge. Print with flat top down.
A minimalist 9mm Blank Tray, capable of holding up to 50 cartridges. Blanks are taller than the tray so they are easy to pull out. Can be printed very fast, uses approximately 40 grams of filament and doesn't need support.
There are lots of SMD storage solutions out there that promise customizability (including this one ), but every one I've run across requires expensive (or at best, free-as-in-beer) proprietary software that would also amount to yet…
Colt 1911 KWC Mag speedloader adapter co2 cartridges Tired of having your fingernails destroyed by those horrid pointy sliders? Wait no more print this. Will work with 1911 mags with co2 cartridges. Video: Print it in ASA/ABS or something…
Note for non-Russian users: PU-4 is a launcher for special pyrotechnic cartridges that are used to send emergency and information signals. In the Russian Federation, PU-4 is not a weapon, does not require a license. If PU-4 is illegal in…
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
These are all remixed and scaled to be similar in size. The big benefit to downloading these from me is that I collected the gens 1-2 of pokemon and made the gen 3 pokemon labels ( the gen 3 labels are not 100% accurate but are as close…
Stackable round cartridges for 19 9mm lugers 66 mm diameter
Holder for caulking gun cartridges print in place easy to hang. I can make some changes if u have different needs
Most reloading trays that come with reloading equipment won't fit 45-70 brass. This is a 25 hole reloading tray that will fit 45-70 brass. I based it off of the original RCBS tray design, which has the two over-hanging “handles” on the…
Do you have too many video games and boring walls!? Then you have come to the right place! This wall mount rack is designed specifically for Nintendo Gameboy cartridges with the bottom piece being branded (whether you can do multi-color…
Parts: 1x Base: Designed to be printed with 4 walls. 1x Carousel: Designed to be printed with 4 walls. 4 variations are included: 12 slots 16 slots 20 slots 24 slots 1x Shaft: This part should be strong. 3 variations are included for…
These syringes full of UV glues have no manual way to dispense the material inside. Instead they want you to buy a gun that costs more than the glue ($15 to $40). That's fine if you are using it to often like to make a living. So I…
A simple and useful ammunition holder with open clip for 4x 12 gauge cartridges.
Had a lot of cartridges so I decided to create a way to organise them all. Very simple block with holes in it basically. Not much more to add other than I've designed it for the 10.2ø cartridges Hope the very niche group of people who…
The title says it all. The OpenSCAD file can be adjusted as needed, and has presets for SP/SR, LP, and LR primers, as well as the table listing the standard dimensions from the SAAMI spec. The SCAD script will automatically generate a…
Storage box for 20x Gameboy Advance GBA Cartridges Simple storage box with hinged lid. Holds 20 cartridges. Has space between the cartridges to allow for easy access. To connect the lid just feed in 1.5mm filament throught the hole and…
If you’re having trouble unloading magazines fast enough, this mod is for you. All the brilliance and modularity of the original protean with some fun tweaks. Rev-Core, A modular rate of fire mod. This mod uses swappable motor cartridges,…
IF you are servicing 48mm KYB forks you'll need someting like this to hold the components in the vice
Slight modification of the AAA tray to hold GBA cartridges. It doesn't quite fit 5 so this one will hold 4 cartridges. It would probably be too hard to take the cartridges out if they were jammed in there. Update: Added a model to hold…
This adaptor ring attaches a centrifugal blower to a Sundstrőm filter cartridge. The cartridges themselves clip together to filter different types of contaminants. I used an SR510 particle filter to reduce small particle pollution and an…
This is a Nintendo Switch Cartridge Case for up to 30 Games. Only need to print the gamesHolder if you only want to store the cartridges. The rest is optional. The topCover if you want to cover the cartridges, the bottombase if you want…
The stand is sized so that the labels of each cartridge are visible while allowing the maximum number of cartridges to be displayed for the space. The picture shows multiple stands next to each other.
An insert that fits five Nintendo Switch cartridges for the cheap little Pokémon Clip'n'Go Pokéballs. The insert snaps into the ball with a bit of pressure but can still be pulled out. Can be glued in place with some super glue if you…
designed in tinkercad.
A very simple Nintendo Switch Cartridges and MICRO SD card holder made it for re-use the Nintendo candy box coin that you can find at the Nintendo Official Stores or Amazon. Or, you can also print your own Mario Box:…
Dead simple model. Box with holes. The holes are 5 cm in diameter. Fits on Prusa MINI! I recommend printing with largest nozzle you have for strength, and with minimal (5 %) infill.
These are Gridfinity bins that fit 19mm tape cartridges for several models of Dymo label printers. (The tape is 19mm wide; the cartridges are about 24mm thick.) I made two sizes. small: 6 tapes in 2×4 Gridfinity units large: 8 tapes in…
Hello, Sharing my project of games stand for 10 Nintendo64 (N64) cartridges. Dimensions: 212x120x26mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
Verschraubbare Behälter, ovale / ogivale Form, für Kleinbild Filmpatronen 35 mm Typ 135, in verschiedenen Ausführungen. ……………………. Screw-on containers, oval / ogival shape, for 35 mm film cartridges type 135, in various designs.
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
Hello, Sharing my project of simple games stand for SNES (Super Nintendo) cartridges. There are 2 versions - for PAL (EU/JP) and NTSC (US) cartridges. Make sure to print the correct version! Dimensions: 222x132x26mm 🚀 Want to sell prints…
English: PRUSA Filament Cartridges – Modified for Readily Available Push Fittings This is a modified version of the popular Prusa filament cartridges. I’ve made some small changes so that they fit standard push fittings and bearings that…
Very simple holder that contains 3 sega game gear cartridge, also with case. No need for supports or brim. The first file contains both pieces already arranged to cover the print area of 18x18 correctly.
A box case that reminds the legendary game console. Can be used as is, but a pair of small screws on the side can help secure it even more. If you liked this thing enough (and was hopefully useful!), please consider supporting me via…
Hello, Sharing my project of simple cartridge stand for 15 Gameboy games. Fits cartridges for Gameboy Classic, Color, Advance. Dimensions: 144x61x19mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get…
Fully 3D printed desiccant cartridges for microwave generation - must be 3D printed from polyamide or any other material with temperature resistance above 125°C. Do not print from carbon fiber reinforced material - may cause them to melt…
This is a large 220mm (L) x115mm (w) x125mm (H) basket to organize dental impression and temp resin cartridges. I don't use them nearly as much in the digital dentistry age, but you still do need them occasionally. It's designed to be…
Pretty strong ring, very stable, keep filter reliable. Recommend to print with PETg, PLA is ok too.
Print it yourself or order from Shapeways ! This case allows you to safely store and transport 12 gram CO2 cartridges that are used in some air pistols and other applications like emergency tire inflators for bicycles. It is mainly…
Somewhat random assortment of dummy firearm cartridges made for various projects. Designed to be used as props and decorations for museum exhibits and similar. Not functional as dummy cartridges in firearms, rims often break from pressure…
Good morning I present to you my Gameboy cartridge display stand for Gameboy cartridge! There are 3 slots available, another model with more slots is in preparation, I will put the link in this description. You can print it without…
Changes May 11 2023 * Added a V2 that uses less material and has more holes for ventilation to help if using in a cooler. What this is: Simple storage for i-Type cartridges inspired by @creativemario_208575 model for 600. I think the…
improved side slide bottle holder with a CO2 bottle holder vylepšený držák láhve o nosič CO2 bombiček
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
Important! I made this model for a friend without having access to actual penfill cartridges. I have used accurate dimensions provided to me, but I have not been able to actually test it with real cartridges. I used a printed one 😅.…
I used Prusa Slicer's cut feature to remove the excess slot(s). Prints perfectly fine without supports, just like the original. Used 15% infill and 0.25 draft profile with 3 perimeters with Geetech PLA. Accidental two colored print as my…
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
Фиксация ограничителя на подавателе предполагается с помощью гужонов (необходимо по 2 шт. на 1 ограничитель, D=3мм, L=3мм ) Для предотвращения прорезывания резьбы рекомендуется печатать из угле- или стеклонаполненных пластиков. Можно…
As refilling my toner is way cheaper than buying new cartridges, I came up with this little helper. It is just a quick model, and it may be possible to improve, but it's better to refill with it than without it. Printed in PETG with 0.4…
My fiancee wanted a case to protect her prescription and not have to use the ugly vinyl cover. This uses 1.75mm filament for the hinge pin, and I have included the step files if you'd like to alter the design. I would recommend PLA/PLA…
I wasn't satisfied with the original tray since the holes were too tight and the spacing was inefficient. So I designed this insert that crams as many rounds into the original case as possible (297x) and makes it easier to get them in and…
Verschraubbare Behälter für Kleinbild Filmpatronen 35 mm Typ 135. Deckel in sechs verschiednen Ausführungen. es passen auch die Deckel meiner Nikon und Leica Behälter. Gedruckt mit PLA ohne besondere Einstellungen. Bei einstellung…
Storage box for Sinclair Microdrive Cartridges. Holds 20 cartridges with space between to allow easy access. Loosely based on an old Transform case I've had for years. Box has a hinged lid which needs attaching by feeding some 1.5mm…