Search results: clear

Sort order

1,086 models

P
PrintablesMiguel M.

DeWalt Miter Saw Zero Clearance Insert

This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…

Downloads
1,511
Likes
268
Rating
4.91
P

Clearance and Tolerance 3D Printer Gauge : 0.15-0.50mm

Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…

Downloads
1,010
Likes
50
Rating
4.5
P
PrintablesBenoit

Radioactive Nuclear symbol Fallout

Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.

Downloads
488
Likes
47
Rating
4.5
P
PrintablesBurfot

Bosch GTS635-216 Zero Clearance Insert

Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…

Downloads
224
Likes
24
Rating
0
P
PrintablesKlikini

FLUVAL AquaClear intake tube strainer

Tested with my FLUVAL AquaClear 50, but should work on most other AquaClear hang-on-back filters as I believe they all have the same intake tube diameter. Printing I printed it with a 0.1mm layer height (but used adaptive layers to cut…

Downloads
212
Likes
17
Rating
0
P

Clearance and Tolerance 3D Printer Gauge : 0.05-0.25mm

Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…

Downloads
128
Likes
17
Rating
5
P
PrintablesMagig_I3Prusa

Pokal Vasemode Translusent CLEAR

its a nice gadget for the Spiralmode test you can print it at 0,3mm layerhight or even up to 0,5mm usa a linewidth of 0.6-0,8mm Speed is up to the Filament flow its at 45mm/sec printed !!! THERE ARE CLEAR STL for your own Branding !!! IF…

Downloads
63
Likes
10
Rating
0
P
Printableseof

Nuclear Shopping Cart Token / Atomeinkaufswagenchip

Doesn't need a MMU, just change filament.

Downloads
55
Likes
6
Rating
0
P
PrintablesStefan Huber

Educational model: Nuclear Pore Complex Earrings (multi-material)

This model is based on the entry 7r5k from the protein data bank (PDB), presented in this publication: Mosalaganti, S., Obarska-Kosinska, A., Siggel, M., Taniguchi, R., Turoňová, B., Zimmerli, C. E., ... & Beck, M. (2022). AI-based…

Downloads
24
Likes
5
Rating
0
P
Printablesmagikalea

Pinguini Tattici Nucleari

Keychain or charm of the italian band Pinguini Tattici Nucleari Printed with MMU

Downloads
15
Likes
4
Rating
0
P
PrintablesEggsy

Core One Purge Bin - Clearance for Core One Left Nozzle Wiper - Remix 20x10x2MM Magnets

I remixed the purge bin from @Ed_2353368 for the Core One to allow larger magnets. I could only find 20x10x2 mm magnets on Amazon. https://www.amazon.se/dp/B0DZXQ5MKL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Downloads
4
Likes
3
Rating
0
P
Printables3DMakerNoob

Clearance Tolerance Test

Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities

Downloads
76,684
Likes
7,221
Rating
4.95
P
Printableslostintech

Clearance Gauge

What, I finally linked to the video? Haha, I said I would. Eventually :)

Downloads
7,694
Likes
837
Rating
4.82
P
PrintablesWilko

C-Clamp / G-Clamp 01 - 04 (Smart infill, better clearance)

Introduction I've created this C-Clamp (or G-Clamp if you like to call it this way) because of three reasons. For my upcoming enclosure build I'll need some clamps to hold parts together. To train my Fusion 360 skills I've never printed…

Downloads
6,335
Likes
635
Rating
4.67
P
Printablescolorful-corvid

Articulated Lizard with Rotated Ankles and Improved Clearances

A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…

Downloads
4,568
Likes
300
Rating
4.77
P
PrintablesAndreas W

KUNA laptop stand with 15mm clearance

I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…

Downloads
3,038
Likes
347
Rating
4.84
P
PrintablesLCSteve

DeWalt DWE7485 Table Saw Zero Clearance Insert

I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…

Downloads
2,971
Likes
378
Rating
5
P
PrintablesAdam L

Print Glass With Your Bambu X1/X1E/P1S/P1P Printer: Orca / Bambu Slicer + Overture Clear PETG formula

Do you want to print as clear as you can on your printer? This tuned set of profiles for BambuSlicer/OrcaSlicer should help you print with clear as i've been able to tune on my X1C. I've tried several different parameters and come up with…

Downloads
2,656
Likes
296
Rating
5

Collapsing Clearance Test Print

This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…

Downloads
2,566
Likes
118
Rating
4.91
P
PrintablesEd

Core One Purge Bin - Clearance for Core One Nozzle Wiper - Remix 20x5x2MM Magnets

I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.

Downloads
2,377
Likes
475
Rating
4.96
P
PrintablesKeep Making

Crystal Clearance Tower & Tolerance Card

A quick and straightforward print to test your 3D printing clearance / tolerances.

Downloads
2,071
Likes
184
Rating
4.95
P
Printablesjpdesign

Tolerance/Clearance Test

There is a new version available here . A simple tester for your printer tolerances. Start with the normal file, if you cannot break out any of them, than you can print the other file, which has bigger/looser tolerances. When printed, try…

Downloads
1,910
Likes
86
Rating
4.58
P
Printables3DMakerSpace

Nuclear Mushroom Cloud [LED Tea Light Candle Lamp]

Light up your room with a bang! This striking 3D printed mushroom cloud captures the iconic explosion shape, designed to sit perfectly over a standard LED tea light. Whether you're into science, statement décor, or just cool night lights,…

Downloads
1,504
Likes
593
Rating
4
P
PrintablesEmbrace Making

Laser Cutter Slot and Tab Clearance Test (3mm materials)

This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…

Downloads
1,380
Likes
97
Rating
4.5
P
PrintablesFestool

Festool Kapex Zero Clearance Insert

Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…

Downloads
1,296
Likes
68
Rating
5
P
PrintablesK2Van

Clearance test - a new challenge who unlocks the 0.06 mm clearance nut?

Many similar clearance tests are available here and elsewhere in internet. I could however not find one that goes tighter than 0.1 mm so modeled one up in Fusion 360. I have been able to tune my printer (CREALITY CR-6 SE with Dragon…

Downloads
1,230
Likes
93
Rating
4.88
P
Printablesdrodfro

Nuclear Cooling Tower Filament Vase

If you print the "Cooling tower filament vase_detail" you'll have to glue it to the vase. Prints in "Spiral vase" or "Vase mode" and fill the channels with your desired filaments. Prints in photos printed at 0.3 layer height with 0.4mm…

Downloads
1,203
Likes
327
Rating
5
P
PrintablesSteven Barker

QIDI Q2 Foot support with extra clearance

Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…

Downloads
1,198
Likes
133
Rating
5
P
PrintablesBBTheStig

Dewalt 7491 Zero Clearance Table Saw Throat Plate - 7491RS - 7492QS

I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…

Downloads
1,153
Likes
105
Rating
5
P
PrintablesCNC Kitchen

Prusa MK4/Nextruder: Clear Planetary Gearbox Cover

WARNING: You can damage the planetary gearbox if you're not careful and might even void your warranty. Use the alignment tool, referenced in the Nextrunder manual to be safe. Print in Clear PETG 0.1 mm layer height 10 mm/s 100% aligned…

Downloads
1,089
Likes
249
Rating
4.5
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
Printablesp3numbra

18650 Rugged case with added hinge clearance

Modified this model to Include some clearance around the rear hinges, as I found that the case wouldn't open properly. Both the top and the bottom files have been modified, however, the original clip works fine. Happy printing : )

Downloads
1,037
Likes
358
Rating
4.75
P
PrintablesRapidMonster

Further Improved Wandering Hour Clock (Increased Clearances)

First and foremost: Thanks @ David Kingsman for providing us with such a neat clock model! Myself and everyone else I showed it to really liked this fresh design! Sadly I ran into multiple clearance issues while assembling the parts…

Downloads
1,011
Likes
277
Rating
4.8
P
PrintablesAksup

AR-15 .223 Rem 5.56 Nato Chamber clear flag

Chamber clear flag for AR-15 modelled after .223 Remington/5.56 Nato round specifications.

Downloads
967
Likes
200
Rating
4.33
P
Printablessthone

Crankbait Fishing Lure (Clear Lip)

This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…

Downloads
950
Likes
153
Rating
5
P
PrintablesCoolDoctorJ

MiniZ Ford Mustang 1967/68 fastback with more wheel clearance

This is a remix of the MiniZ Ford mustang 1967/68 fastback (sportroof) body . I cut out additional clearance for the front and rear wheels in order to allow better steering and suspension travel specifically on the Fully Printed 1:28 Car…

Downloads
918
Likes
404
Rating
5
P
PrintablesHonza

Clear Prusament PETG - glass profile

I started playing with the settings to print the Prusament PETG as clearly as possible. I used some basic settings from the guide made by Rygar1432 so I am posting this as a remix. The main formula is to print slow, hot, and a bit…

Downloads
868
Likes
73
Rating
4.63
P
Printables3D Printy

Pop-up Gift Card Box - Larger Clearance

Alternate latches for the Pop-up Gift Card Box with larger filament holes. The original latch files have 2.2mm holes and are made to be a tight fit with 1.75mm filament. These latches have 2.6mm holes, which will more easily accept 1.75mm…

Downloads
781
Likes
210
Rating
5
P
Printableso_shag_henessy

X1 / P1P PTFE Tube Guide REMIX to clear wiring

This is a merger of AdamL's X1 / P1P PTFE Tube Guide and ShortStack variants in order to get the best of both worlds. I wanted to keep the length of the original Tube Guide in order to prevent the tube from contacting the top glass panel…

Downloads
774
Likes
106
Rating
4.5
P
PrintablesViragored

Articulated Lizard with Rotated Ankles, Improved Clearances and easy to print

The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…

Downloads
744
Likes
46
Rating
5
P
Printablesjdegs

Clearance Gauge (Improved)

This is a remix of the clearance gauge by Lost In Tech with the addition of an 11mm peg version for 0.6mm printers. I also changed the text from embossed (raised) to debossed (indented), added a small chamfer to help reduce elephants…

Downloads
728
Likes
87
Rating
4.8
P
PrintablesBondFire

Nuclear CLICKER

A Nuclear CLICKER!!!! ALL PARTS 3D Printed !! NO OTHER PARTS NEEDED!!!! easy to assemble!!!! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire

Downloads
723
Likes
159
Rating
4.67
P
PrintablesSlaig

C-Clamp / G-Clamp Remixed - Better clearances and durability

Notes Since my poor tolerances of my 3D printer did not allow me to print the thread correctly, I remixed the great 03v2 file from Wilko to fit my needs (thank you for the fusion 360 file !) Fully compatible with the original author…

Downloads
721
Likes
58
Rating
4.67
P
PrintablesMarky

DeWalt DWS 780 Zero Clearance Insert

Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…

Downloads
713
Likes
68
Rating
0
P
PrintablesNeil J Borja

Pastamatic Extra Clearance Wiper Mounts

This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…

Downloads
670
Likes
86
Rating
4.92
P
PrintablesRyan G

Zero Clearance Block/Backplate Festool Kapex KS 120 EB

Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each…

Downloads
669
Likes
77
Rating
5
P
PrintablesModel_Citerzen

Astute Class Nuclear Submarine

Import of the Astute Class Submarine by Hobbyman. https://www.thingiverse.com/thing:4973343 ____________________________________________________________________ The Astute class is the latest class of nuclear-powered fleet submarines…

Downloads
669
Likes
24
Rating
5

Nuclear Waste Barrel EDC Bead

This is a small EDC bead designed to look like a nuclear waste barrel. It works well as a lanyard bead, zipper pull, or keychain accessory. The model is split into two parts for easy multi-color printing, but it can be printed on any 3D…

Downloads
608
Likes
347
Rating
5
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Downloads
586
Likes
55
Rating
0
P
PrintablesMKE Dan

Clearance Test

Clearance Test. Tests diametral clearance capabilities from .30mm to .05mm My Slice settings (in orca) for the Bambulab P1P: Layer height: 0.1 Slice gap closing radus: 0.01 Mat'l Matt blue SUnlu PLA FYI: Even the .05 clearance worked …. a…

Downloads
570
Likes
30
Rating
3.67
P
Printablesdrew.brashler

Clearcom FreeSpeak Comm Desk Clamp

This is a desk clamp for holding a Clearcom FreeSpeak comm belt pack to a desk. It is large enough to fit other belt pack style partyline comm packs. But it perfectly fits the Clearcom FreeSpeak belt pack as pictured. I was tired of using…

Downloads
567
Likes
38
Rating
5
P
PrintablesUseFullMake

Clearance Coin

This is a Clearance test that should be fast and should not consume a lot of plastic. This should take less than 10 min with 0.2mm L.H. 50mm/s and less than 2 Grams of plastic. This is measuring clearance from 0.05mm to 0.5mm. I had to…

Downloads
563
Likes
31
Rating
4.8
P
PrintablesBurgessG

Delta Table Saw ZERO Clearance Throat Plate (v3)

Purchased a Delta table saw from my LHS and although the throat plate that comes standard works, it lets a LOT of dust and debris through. So, instead of plunking down big bucks for a replacement I simply made my own. And it worked!…

Downloads
538
Likes
84
Rating
0
P
PrintablesPaddes

Nuclear waste drum

Prop barrel with radioactive warning symbol

Downloads
532
Likes
46
Rating
4.88
P
PrintablesArea51

Prusa MK Filament Guide Dust Clearner for ClipOn base

This is a simple filament dust collector/cleaner for the Prusa i3 MK Filament Guide ClipOn base. Fits all Prusa i3 MK frames. Uses an ordinary household sponge - cut it to a small cube, as shown on the photos. Easy to replace when needed.…

Downloads
532
Likes
67
Rating
4.78
P
PrintablesAtelierDZT

Zero Clearance Insert for Dewalt 7492

Just another Zero Clearance that fit for Dewalt 7492 with stock equipement. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** Amazon BasicFil PLA…

Downloads
528
Likes
45
Rating
0
P
Printablesataboo

Delta 36-725 table saw zero clearance insert

Update: the first version was a bit small and clearance between the two halves was too tight so I've uploaded a v2. May fit on other saws, but based on measuring the stock cover for a Delta 36-725 T2. Around 3-¾" x 15-½". 2 pieces to…

Downloads
524
Likes
59
Rating
5
P
PrintablesGusse_Otto

NUCLEAR POWER PLANT MODEL

this is an accurate model of one of the most administrable nuclear waste plants, I hope you find it useful for e.g. scho

Downloads
523
Likes
47
Rating
0
P
PrintablesJohn

Thomas The Thermonuclear Bomb

History Following video is the oldest evidence of Thomas the thermonuclear weapon joke on the internet and possibly its origin. The joke currently exists in multiple forms - one of most popular form, often found in memes, is used as a…

Downloads
521
Likes
101
Rating
0
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Basecamp/C10/JLU/Bronco

Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…

Downloads
519
Likes
69
Rating
3
P
PrintablesWyldesyde007

Craftsman tablesaw zero clearance throat plate

A zero clearance throat plate for an old portable craftsman table saw. print the pieces as they are laid out. The plug end for the hook is deliberately tight to get a snug fit after a small amount of sanding. Print instructions Print…

Downloads
509
Likes
78
Rating
5
P

Barbenheimer little boy nuclear bomb

This fine piece of modern art is a “Little boy” nuclear bomb with “Barbenheimer” written on the side with barbie font, nothing more, nothing less

Downloads
505
Likes
56
Rating
4
P
Printablesoufzor

Filled Clearance Tolerance Test (Remix)

I quite like this Tolerance Test by 3DMakerNoob but sometimes I like to add notes directly on the prints when doing some setting tests. The original model shape was too limiting due to all the curves so I simply filled it. Material…

Downloads
499
Likes
23
Rating
5
P
PrintablesRandoTechNerd

CLEAR PETG Tile & Ironing Test ORCA .3mf (update for Orca of How to Print Glass by Rygar1432 & others)

FULL INSTRUCTIONS: https://randotechnerd.com/clear-petg This is only the settings for a 0.6mm nozzle single tile. Use the .3mf for settings the stl is just a 20x20x4 cube (images here are of this size). Original video 22x22x6mm for the…

Downloads
468
Likes
32
Rating
0
P
Printablestime4toad

Chernobyl Nuclear Power Plant CHNPP 1:1000 scale realistic.

A model of the Chernobyl NPP as accurate to real life as possible. I recommend printing the vent stack for units 3-4 separately and gluing them Category: 3D Printing

Downloads
464
Likes
29
Rating
0
P
PrintablesThiago Silva

Nano Test Print - dimensions, overhangs, bridges, stringing and clearances

Very tiny test print I designed to test the level of detail I could get from my settings. See attached pictures for all measurement details. This print tests dimensional accuracy, curves and spheres, holes, bridging,…

Downloads
464
Likes
37
Rating
5
P
PrintablesWoodenti

zero clearance adjustable miter runner insert for table saw

Update Additional model for 16.4mm - 17.5mm grooves (fits Bosch GTS X10). (In case your groove is only marginally smaller, i suggest to manually grind it off) Idea Above the final miter runner the cross cut sled will be placed which will…

Downloads
452
Likes
143
Rating
5
P
PrintablesChris

AX24 XC-1 52mm High Clearance Lower Suspension Links

AX24 XC-1 52mm High Clearance Lower Suspension Links A set of stock length High Clearance Lower Suspension Links for the AX24 XC-1. I wanted a set of color suspension links to match the Orange body of the AX24 itself. Printed in Prusa…

Downloads
451
Likes
80
Rating
5
P
PrintablesGuyH

M3 (ISO) Countersunk Screws Clearance holes - Negative modifiers

What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…

Downloads
451
Likes
37
Rating
5
P
PrintablesFriendlyFire

Magic: The Gathering Commander Deck Box with Clear Card Display

I wanted to try my hand at a deck box for Magic: The Gathering which would fit a regular single-sleeved 100-card Commander deck as well as common extras like tokens and the precon life wheel, but with a twist: the front of the box should…

Downloads
446
Likes
53
Rating
5
P
PrintablesLazyMaker

Nuclear waste barrel - vase mode

After printing, use permanent marker to colour the symbol. Best results achieved by using yellow filament. P.S. Model on photos was printed at 70% scale.

Downloads
444
Likes
77
Rating
5

High Clearance Mod for Thumper RC 4X4 Crawler

This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…

Downloads
442
Likes
71
Rating
5
P
PrintablesDave G.

Motor Mounts with Clearance for 1.5GT Pulleys on Upgraded CORE One/+/L

After installing the 1.5GT belts and pulleys for the Gen2 upgrade on my CORE One+ printer, one of the new pulleys was rubbing on a curved guard built into the stepper motor mount. It made a hard-to-locate scratching sound while printing…

Downloads
433
Likes
181
Rating
5
P
PrintablesYNaught42

Mason jar lid for clearing Storz & Bickel (or POTV) capsules

Its use is pretty simple and straightforward, if you know you know. This works for Storz & Bickel capsules and also works for the Planet of the Vapes (POTV) capsules that fit the Lobo, One, etc. I recommend printing “right-side up” for…

Downloads
432
Likes
81
Rating
5
P
PrintablesWill.S

Gridfinity Dial Caliper holder for low-clearance drawer

This is a container for 150mm/6in dial calipers that gets them as low as possible without laying them on their side and taking up extra horizontal space. I had to leave out one of the magnet holes to make room, but the other 23 should…

Downloads
424
Likes
49
Rating
5
P
PrintablesEA3D

Clearance test spinner

There are 5 testing wheels with a clerance of 0.5, 0.4, 0.3, 0.2 and 0.15mm.

Downloads
416
Likes
31
Rating
4.75
P
PrintablesFierce Pears

Nuclear power plant

Printable without supports and with a 0.4 nozzle but result will be definitely better with 0.25 nozzle. Also I recommend 0.07 layer and 10% infill. My power pole also suffered from stringing (mostly because of wet filament and wrong…

Downloads
414
Likes
35
Rating
5
P
PrintablesCobalt

Metabo KGS 216 M Zero clearance insert

I could not find a zero clearance insert for my 2023 Metabo KGS 216 M as the old versions differ. I have included both the entire model as one piece and a version consisting of 2 parts for printers with a smaller print volume. Print the…

Downloads
413
Likes
55
Rating
4.33
P
PrintablesCzechu

Airsoft P90 Stand – clear or with branding

Removed text and arrow from original ( https://www.thingiverse.com/thing:2773868 )

Downloads
408
Likes
43
Rating
5
P
PrintablesCoinCorrector

Clear retainer/two retainers case, print-in-place

Made based on the measurements of my and my friend's clear retainers. I hope they are universal enough. Due to a request I made a version for two retainers.

Downloads
408
Likes
28
Rating
5
P
Printablesendofturn

Root Clearing Tokens

There are larger, oblong clearing markers, as well as smaller circular ones. Additionally, there are numbers for use when using one of the automated players. Notes: No supports needed

Downloads
403
Likes
65
Rating
5
P
PrintablesMoustacheBob

Nuclear Bomb Piggy Bank

A perfekt Piggy Bank for everyone who wants their own Nuke, destroy the world or a decoration piece. To get the money out of it just drop a real nuke on it. Good Luck printing!

Downloads
401
Likes
41
Rating
0
P
PrintablesHEAVYLIGHTS

Nuclear Coaster

Designed these coasters to put in my Fallout Mini Nuke storage box. Print instructions No rafts necessary. No support necessary. Layer height: 0.2-0.3mm Infill: 15% Notes: Printed in clear PETG at 0.3mm, then painted over with yellow paint.

Downloads
395
Likes
83
Rating
5
P
Printablestimdb

Creality K1 Max Clear Sided Lid Riser

Print 4 corner pieces - these clip into the corners of the K1Max frame. Slot perspex sides into place. Grey/neutral tint perspex matches K1 max panels well. You'll need 4 pieces 350mm x 60mm, 5mm thick. I printed with 4 walls / floors,…

Downloads
390
Likes
43
Rating
5
P
PrintablesHanselcj

Zero Clearance Insert, Miter Saw Plate, DW715

I created a zero clearance insert to replace the standard stock insert on my DW715 Dewalt Miter saw. This one has been in use for a few months now and doesn't show any serious signs of wear. It requires a long bed (I have a prusa i3), but…

Downloads
373
Likes
54
Rating
4.6
P
PrintablesDudadz3d

Festool Kapex 120 REB Zero clearance Fence Insert

Keep your Kapex from blowing out the grain on the back side. I've seen similar items, but they were bolted to the saw only worked at 90 degrees. This is easily removable and also allows the saw to move freely while installed. Front face…

Downloads
371
Likes
18
Rating
0
P
PrintablesHanselcj

Sprinkler Extraction and Clearing Tools

My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…

Downloads
366
Likes
67
Rating
5
P
PrintablesJamie Clarke

Evolution Mitre Saw R255SMS+ Zero Clearance Insert

Zero Clearance insert for the R225 mitre saw from evolution power tools. It has a dust box on the bottom with an opening at one end. This prevents dust from falling out the underneath of the saw and encourages dust to be flung up from the…

Downloads
366
Likes
28
Rating
5
P
Printableszuberio

Print in Place 45mm Folding Cube - 0.5mm Clearance

My 6yo saw one of these on Thingiverse and wanted me to print it for him. Unfortunately the tolerance on that other model was 0.2mm - too tight for my printer. So I created my own with a 0.5mm tolerance and it works great. Exterior…

Downloads
361
Likes
63
Rating
4.5
P
PrintablesmApe

Metabo KGS 254m Zero Clearance insert

Zero Clearance insert for Metabo KGS 254m You need both part 1 and 2 plus 2x 5x20 mm sylinders to mount. Use original screws to mount

Downloads
361
Likes
28
Rating
4.75
P
Printablesjlennox

Ridgid R4512 Table saw zero clearance throat plate (R4520?)

This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…

Downloads
360
Likes
52
Rating
0
P
PrintablesMartin Wirtz

Bestway Flowclear Pool ladder feet

Print it standing to strengthen the clamps

Downloads
357
Likes
61
Rating
5
P
PrintablesStig

Nuclear Launch Code - Money Gift

Enough space to fit a 10€ bill, if folded twice. Pause print to put the money inside, I put a piece of paper over the money to protect it from the hot filament.

Downloads
345
Likes
46
Rating
4
P
Printablesduffwv

Ender 3 V2 Y Tensioner and Stepper Mount Linear Rail Belt Clearance Mod

I installed a linear rail kit with a rail mounted to the top of the y extrusion. This caused the belt to angle up and rub against the stock Y tensioner and the belt hole for the Y stepper mount. There are models that I made to replicate…

Downloads
330
Likes
51
Rating
5
P
PrintablesH3dSprint

clear-transparent PETG - print glass

To print parts which looks like glass, I have checked different print settings for PETG. Overview Settings: Results: No printed part, indipendent of the settings, looks like glass without grinding and polishing. The most promising result…

Downloads
324
Likes
72
Rating
5
P
PrintablesGirak

Prusa CORE One Snap-in Corner Block/Plug (Door Clearance remix)

The original corner block on the top left interfered with a fully opened door. Attached are files for standard core ones (hinge on the left side) and for those who have switch to right hinged.

Downloads
320
Likes
54
Rating
4.92
P
PrintablesGuyH

M4 (ISO) Countersunk Screws Clearance holes - Negative modifiers

What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…

Downloads
316
Likes
25
Rating
5
P
PrintablesBrainanator

SCX10 Skid Plate. High Clearance, Flat Bottom

Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…

Downloads
312
Likes
18
Rating
0
P
PrintablesChrisCow

Ridgid R4514 Table Saw Zero Clearance Insert

For large enough printer, just use the body_full and the two nob parts. For smaller printer, you will have to print the body as two parts and then connect them using 3 copies of the insert. Use glue if you want to make it permanently. For…

Downloads
310
Likes
56
Rating
5
P
PrintablesJeremy

Garmin Varia / Magene L508 Saddle Mount for Saddle Bag Clearance

Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…

Downloads
304
Likes
31
Rating
0