3,310 models
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
The IKEA RIBBA frames included wall mounting hardware is about 1 inch deep set into the back of the frame, making traditional hanging with a screw difficult. To make it easier to mount IKEA RIBBA frames, and by extension, canvas prints, I…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
Print approx. €9.04–€11.05 excl. taxPreliminary estimate for one variant
Are you a Prusa 3D community member and proud to show it to everyone? When you are sitting in traffic, make sure everyone knows you are going home to the best printer out there with this Prusa 3D license plate holder. Sized for US license…
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
Funny Sign - In case of fire - git commit... (IT Humor) Print with filament change for different colors.
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
Hey Printables community! 👋 Big news — I'm officially opening commissions for custom 3D models! After 81 models and counting across Pokémon, Marvel, Anime, and Monsterverse, I'm ready to bring YOUR ideas to life. 📌 Note: The models…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for one variant
Some Keystone wall plates have thicker retaining bars, such as Leviton Commercial. This remix accommodates this. The file that this was remixed from did not have enough clearance for Leviton's thicker retaining bars which caused the…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
EN : My girlfriend and me gonna search a tissue box with 2 compartments for our TV remote but never find the desired one, I made it myself this model to store different remote standing up to have an easiest way to catch it and to limit…
Print approx. €33.93–€41.47 excl. taxPreliminary estimate for one variant
A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…
Print approx. €11.46–€14.01 excl. taxPreliminary estimate for one variant
We needed a holder for the communion candle from our son we saw some online but i thought “hey, i can print that on my own” i found no design that i liked, so i made one on my own it is designed to fit 40mm candles but you can scale it to…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
Tame That Under-Desk Mess This simple cable organizer can be affixed under a desk or table using small-sized 3M Command Strips. Print as many or as few as you need, and organize your cables without screws or damaging adhesive. Prints…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
I saw a bunch of others models out there, but most seem to require screws (which I don't love in the bathroom and can't do in a rental property) so I wanted something that would fit on my build plate (Prusa Mk3) and would be supported by…
Print approx. €8.73–€10.67 excl. taxPreliminary estimate for one variant
FISH CARP FRESHWATER COMMON KAPR RYBA
Print approx. €3.78–€4.62 excl. taxPreliminary estimate for one variant
Remix of Osfald's model to adjust it for a slightly different shape of 12mm square contacts. See photo. The model is otherwise unchanged, and it fits and holds a single AA battery very nicely. The contacts slide through the bottom of the…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is a bobbin holder for a size L commercial embroidery machine bobbin. It holds about a dozen pre-wound bobbins. I printed the teal colored one in PETG and the files posted are for a PLA version. Either would be fine. Support material…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Atakule is a 125 m (410 feet) high communications and observation tower located in the Çankaya district of central Ankara, Turkey, and is one of the primary landmarks of the city. As the district of Çankaya is itself on a hill, the tower…
Print approx. €3.79–€4.64 excl. taxPreliminary estimate for one variant
This Modern Retro Style Desk Clock is easy to print and looks great in any colour combination, and it's also easy to assemble. I printed all the parts as listed below and this will be reflected in the g.code. Otherwise use the STL files…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Box für https://www.printables.comdemodel547500-prusa-mk4-tool-holdercomments1391954 Box for https://www.printables.comdemodel547500-prusa-mk4-tool-holdercomments1391954
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
We needed a convenient way to store reusable shopping bags in the kitchen. I found a great model by Rixon Redd on Printables and modified it to be mounted with a 3M Command Indoor Picture Hanging Strips (Large) Pairs.
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
FISH FRESHWATER COMMON RYBA
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Commemorative coin pendant Make a pendant from a commemorative coin without damaging the coin. Adjust the size of the model in the slicer and don't forget to pause the print to insert the coin.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Minimalist Accent Lamp | Free Commercial Use A minimalist, modern desk lamp designed for everyday home decor. Features a twist-lock shade mechanism, toolless assembly, and an optional insert for custom lighting aesthetics. Bulb…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
The 8032-SK model of the classic Commodore CBM PET lineup does not feature the iconic “hood stand” that holds the case open for easy access. With these parts, you can retrofit a similar stand that securely holds the case open between the…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Added Gcode for generic PLA and 10% infill . Letter height is 1cm and length of word social is 20cm fits Prusa mini bed ;) hand nicely on fridge or whiteboard
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
FR: Porte pile de remplacement pour barre de son PHILIPS: HTL2160 HTL2101A HTL2111A et autre, de la même forme. EN: Replacement battery holder for PHILIPS soundbar: HTL2160 HTL2101A HTL2111A and others, of the same shape.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading "Commerce profits both parties" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you enjoy…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
I was thinking of this lil gadget from the Bill Hodges/Holly Gibney series of books by Stephen King the other day and thought why not. The Zappit Commander is produced by Zappit Inc. owned by the now bankrupt Sunshine Solutions. The…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
A se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes. Each size has an option of Outer Diameter measurement or Inner…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
Please read the entire text before printing! I often make the mistake of not doing so. If you like the model, consider supporting my future projects: https://boosty.to/artificialworld/donate . 1. Model: Moon Appr. diameter: 210 mm…
Use VHB Tape or screws to connect it to surfaces. Original Length: 100mm Short variant : 70 mm
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
The super adorable Axolotl just got a cosmetic upgrade! This one is truly gorgeous! :) This is a remix of the high res version of the articulated axolotl. Big shout out to AKinferno for his hard work making this! 3mf provided. Holes for…
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Stackable deck boxes for Magic the Gathering, including: Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Standard deck box with…
Mesh Bowl Elevate your space with this sleek, 3D-printable Mesh Bowl — a modern, minimalist container ideal for decor, storage, or gifting. Featuring a dynamic mesh pattern and clean geometric curves, this design strikes the perfect…
Build instructions are identical to the original Rugged Box using same hardware. -Insert M3 bolts through bigger holes(outer) and thread into smaller holes(inner). -Latches are a single object. Use cut tool in slicer to separate them and…
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
These are the creative commons skins for my LED track system. Please remix, and share your own custom skin patterns. See Video:
A fun little project for Star Trek fans. I designed a communicator kit that is split up into separate parts. You can choose to make a solid version or one that has space for electronics. Update March 10 2026 - Finally added a holster.…
3D Files for a 1:12 and 1:48 scale version of a Republic Commando! This is 1 pose of a 10 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
A deck box based on a design that I saw a few years ago but could never find it again. It's a simple deck box with no extra parts required and with the dovetail style lid, no disgusting plastic on plastic noise other deck boxes have.…
I made this model, because i couldnt find any deckbox that fits all my needs, and thought id share it with you all. It holds 100+ sealable doublesleeved cards, with a seperate room for tokens, i believe itll hold about 20 sleeved tokens.…
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…
To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
This wall mount was designed around three main criteria: Completely hide a large 3M strip Allow the user to use the camera and home button even with a case that accommodates the apple pencil Allow the print to be made without supports I…
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
CHANGELOG Main Instructions follow. 30/10/25 - Added spoolholder_spindle_mk4, spoolholder_roller_mk4 and buffer_mk4 by request. To keep things simple, these versions cut away some material to get them to fit on a MK4 bed. Reported to…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
It has been bought to my attention the helmet was done by Dan Inskip over at the MiniFactory. For those of you wanting to print the helmet complete on say a CR10. head on over to the link below and give thanks to Dan for his great work.…
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
The deck box I remixed from is fantastic, but there were a few things I wasn't happy with. I also wanted to be able to fit the life counter inside the box. IMPORTANT: If you want to use magnets in the life counter, you need to set…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
FEATURES Besides the eye-catching locking mechanism, there are also further features, wich make this deck box unique. There are two storage compartments for small dice or tokens . And the door also acts as command zone . Just slide your…
Hose adapters with a 90deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape. The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings). The…
The original Fidget Toggle Switch by kriswillcode is very satisfying to use as well as being easy to print. But as soon as I saw it I wanted it to have one of those red safety covers, the sort of thing you see in movies when people are…
Do you like trash? Do you like raccoons? Do you want to feel like a trash panda when you pull out your deck? Then this is the deck box for you! Inspired by the raccoons of Bloomburrow, I designed this deck box for my wife and built her a…
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
Saw a Commander Deck box posted to http://www.reddit.com/r/3DPrinting , but the original user deleted the post. Thus I took it upon myself to recreate it from scratch and adding in some neat things while I was at it. This is a deck holder…
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
Please request a size with a comment and i'll add it as soon as possible 10-Krone DK 1 Euro 2 Euro Canadian quarter Canadian dollar (Loonie) British one pound US quarter Australian dollar Singapore one dollar Polish 2 złote A removable…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is my take on @Collingall 's version of the "Rugged Box (Parametric). Thanks for sharing the files - give them a like too: A slim and elegant deck box for Magic: The Gathering cards (or any other TCG with the same format). Fits…
Made some major changes in V2 with suggestions from @MediaMan3D. The focus here was to eliminate plastic from the sides, have the front weight load of the AMS rest on the front corners versus relying on a bow joint, and added some wire…
I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.
pamětní mince se stromem - commemorative coin with a tree
Navy Riverine Command Boat or RCB for short. This was used by the Navy as a Coastal and River combat craft
Hose adapters with a 90deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
STOP - BEFORE YOU PRINT THIS MODEL - CHECK OUT OUR NEW AND IMPROVED DESIGN HERE: https://www.printables.com/model/327900-stackable-lego-brick-sorter-sorting-box We store a lot of our LEGO bricks in two types of Ikea Containers, the Sanla…
STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…
Use VHB Tape or screws to connect it to surfaces. Length 122 mm Thickness 3mm Print in PETG for better results.
3D Printed Telecommunication Tower (1:100 Scale) Description: This meticulously crafted 3D model of a telecommunication tower, scaled down to 1:100, is ideal for 3D printing enthusiasts. It faithfully replicates the design of a real…
About DJI Neo Adventure Command Center Introducing the DJI Neo Adventure Command Center : a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This shockproof transport vault not only houses your…
Created this deckbox to fit a 100 card sleeved commander deck, as well as 15 unsleeved tokens and a life counter. The walls are definitely thicker than they need to be, but as this was going in a backpack, I wanted to make it sturdy
Hi Darknight, this took many hours to complete because I've shifted premis and where we I am now the internet is dreadfull. Once finished these files were over 100mb + each and of course on damn near dial up speed, it was practically…
A farmer, bar keep, bar maid, and half orc barkeep with a kitty! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
There are two inserts - one with a 0.3mm tolerance and one with 0.5mm depending on your printer tolerances. Just print, paint and glue!
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all? No more shall your headphones be treated with such disrespect! Treat them right…
Time to Gridfinitize your pocket change. I arranged the stacks in size (diameter) order which is sure to soothe the OSD in some of you, as opposed to denomination order, which is sure to trigger the OSD in some of you 🫠 The step file is…
Stackable deck box for Magic the Gathering. Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Dice-tray base that can hold dice,…
MTG Commander Box remixed from Ultimate Card Box v4, added commander card window, changed sizing to work best with single sleeved precons and added pins for non-magnetic mount. V4 alt: alternative hinge design that doesn't require any…
Here is a remix of the awesome Discovery communicator kit designed by mooslug . I love how the model is accurate so I wanted to make it as a static prop without electronics. I solidified the body and made the flip-up hinge mechanism…
Based on the Rugged Parametric Box by Whity, i tweaked it to fit a sleeved 100 card commander deck (plus tokens). Split in half the cards fit nicely into each half and the commander can be in a top loader in the front "window". Requires…
Background: I didn't want to damage my wall installing the honeycomb storage wall system, so I looked into command strips. I took one I liked and remixed it. What I like about original mount I remixed from: attaches from the back (the…
Generic Medieval Knight Cavalry Command for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an EDH/Commander tray. If you want something a bit smaller, check out the Compact Commander Tray ! This EDH tray can hold the…
Gyomeland M53R, a custom Magic: the Gathering Commander sized deck box. Inspired by the industrial kitchen ranges sold by Garland, this new and improved design features: Improved Oven Door, securing your 100 card Commander deck within.…
This deckbox is made of three main parts, which assemble by using 16 neodym magnets (6*3mm). UPDATE : Added some additional parts (window, top and front text panels), which can be glued (otherwise, you can try to paint the white parts of…
![MTG Commander Box [v4]](https://media.printables.com/media/prints/763363/images/7385852_1280f58f-c9b3-4784-817b-a23507d46db4_b0e39541-7345-41a5-abb9-10860e449896/img_20240808_095036.jpg)
