303 models
This is summary for the other models of Box with drawers in one place where it will be more easy to update the files, for the moment I will not delete the single models. Existing separate models (soon will be deleted)…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Molecular surface representation of the bovine mitochondrial ATP synthase state 1b PDBID 5ARE. The chains were grouped and printed so that the main structural components are visible: F0 in green; F1 in blue; axle in red and stator in…
Print approx. €3.87–€4.72 excl. taxPreliminary estimate for one variant
⚠ DISCLAIMER ⚠ Let me begin by saying that you need to be extremely careful when installing and using this junction box. It is made from material not deemed electrically safe, and you are working with high voltage that could be lethal.…
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for PETGSource material: PET
Trays for parts and other things.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
I am trying to deluxify my copy of Automobile from Martin Wallace. I designed these factory components to take the game up a notch in regard to table presence. You will print 13 Closed Factory pieces (in Black), as well as 1 parts Factory…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Update 11/24/22: Everything fit really well but the fan was super loud so I unplugged it and am currently working on a soltution to make it a quieter I had way too many small 12v power bricks for my modem, router, switch, and a home…
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for PETGSource material: PET
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
Tip/Donate Components for the game "Terraforming Mars" by Stronghold games; -"Player Cards" which sit atop (or in place of) the player card you use and play on for the game -"Cube Trays" that help hold together the different unit cubes…
english version see below. ------------------- Einen älteren iMac 27" kann man zu einem wirklich guten 5k Monitor umbauen mit wenig Aufwand! Das Video von Andi zu diesem Thema ist zu finden unter Andi hat den Umbau sehr gut erläutert! Ich…
Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…
I designed these components for a Smartphone holder ( http://www.thingiverse.com/thing:1778271 ). I thought that other people might find the ball and socket assembly to be useful for one of their projects. Unfortunately, I resized it a…
Modified version of the robotic arm by @RACBOTS_756978 The bottom case can hold a 2x8 cm PCB. A clear build video below.
A very small pc with internal components. The .STEP file is included if you want to create your own components for it. Print with resin for best results. The side panel is optional and can be printed with clear resin You can get a…
Build Your Own IKEA Pieces using this fully parametric SKADIS component library! For best results, please use the most updated version! Current version: v2.1 This is my first pass at creating building blocks using IKEAs SKADIS design as…
Lock box with slide style latch. No pins or bolts needed on this one. 3 hour print on bambu p1p. 95grams filament. Tested in ABS, PETG and PLA at only 15% infill. Lock needs to be slid in to one half before locking two main halves…
I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…
Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…
I wanted a drybox that would keep my filament dry during the humid months and I really wanted to eliminate the MMU3 buffer that takes up tons of space and keeps feet of filament constantly exposed to the humidity. After researching this,…
The mini-tray was designed as an alternative to the standard JEDEC tray for semiconductors. It has the same width as a JEDEC tray, but its length is a third of that of a JEDEC tray. Thus, three mini-trays lined up have the same…
This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…
This download contains all 3D printable components for our SingleCell enclosure. Please click here if you ordered the SingleCell MKII and need the latest files. Currently compatible with the Prusa MK3S with black and silver PSU types…
Prints just like the original and has thin walls around the perimeter so that it fits together seamlessly
A very small pc with internal components.
This is my attempt too separate this characters Helmet into components. Which was challenging to say the least. As a self taught hobbyist. I can't say this is correct by any means. but it was all I could come up with. Sizing looks spot…
As I have a very old edition with just cubes and disks, I wanted to pimp my Agricola a little with the components from the more recent versions. I have scaled all the components to their actual sizes, fixed the cattle via meshmixer and…
The tray is 8 mm deep, has 20 40x25 mm and 6 68x40 mm numbered compartments. Fusion 360 file included.
This is a simple dump truck consisting of only a handful of parts that snap together. Everything can be printed with no supports, although the dump bed will test your printer's overhang and bridging capabilities. I found that enabling…
Just print one of each part, except the DeckBox and DeckHolders that are duplicated. If Vehicles-B is printed upside down it doesn't need supports. I also glued a little strip of foam the bottom of the this part to hold the Carryalls…
ScrapNC Low Cost, 3D Printed, minimally performant, scalable CNC router for low demanding workloads like plastics, wood, cardboard, and plotting made from common 3D Printer components; specifically upcycled from the VzBot-330 and the…
A beautiful decorative model 🥰 to keep at home or to give as a gift, feel free to rescale the model or print it in different colours. You can add text with BambuStudio!
While randomly browsing Amazon, it recommended me some SMD resistors. I didn't need any of the components, but I liked the mechanism on the box it came with, and I've never seen a 3D-printed version, so here's an attempt. It has many…
Another beautiful decorative model 🥰 to keep at home or to give as a gift, feel free to rescale the model or print it in different colors. Commercial license Do you want to sell prints of this model? You can purchase commercial licensing…
This was the first project I created using OpenSCAD. The goal was to create a minimalistic design that would look good and be able to contain all my electronic components for hobby projects. Configuration : Printer: Ender 3 v3 SE 3…
You will need these: 6 m3 x 30mm 2 m3 x 20mm 3 m3 x 10mm 3 m3 x 8mm 15 porcas m3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Toys & Games
This Electronic Component Storage System is designed to keep every workbench neat and efficient by providing organized storage for electronic parts. It features two case sizes—2-drawer and 4-drawer—along with six drawer configurations…
All parts have been specially redesigned with printability in mind. As such, not all components are 1-1 with their original counterparts. Some tolerances might be off depending on your print settings, but this should be solved with a bit…
Cheap and simple VHF-/UHF-Yagis by DK7ZB, extreme lightweight for portable use The boom is 25 mm PVC or Al pipe. Elements are 3.2 mm Al welding rods. Reflector for 2m antenna is divided to 2 parts because is longer than 1m and is…
Fruit Fly Trap / Fruchtfliegenfalle English The 3D-printed fruit fly trap is an effective and user-friendly solution to get rid of pesky fruit flies. It consists of three main parts: the canister, the trap, and the lid. These parts are…
A stackable storage solution for Marvel United Cardboard Locations & Villian Dashboards , as well as Plastic Tokens . Two sets (6 total boxes) can hold all the deluxe components from all 3 seasons. Add 6x3mm magnets to the box top & box…
A beautiful decorative model 🥰 to keep at home or to give as a gift, feel free to rescale the model or print it in different colours.
Note: You will not be able to fit all available content into the Original game box using this organizer, that will require the Legendary Box and some zipper bags or additional containers that I don't intend to design. Update (06/04/2021):…
As I'm working on quite a lot of Eurorack (modular synth) modules, I needed a solution to sort the components I'll need to solder. Small switches, LEDs, transistors, ICs etc. fit the small compartments perfectly. Resistors, diodes and…
STL conversions of all the greenpower f24 kit car parts and some assemblies
Masterful Dungeons Multi-level Components are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These pieces function as structural wall elements that allow floors to be connected across…
Welcome OpenPnP Community to the PixiePlacer Wiki! The PixiePlacer is a DIY Pick and Place Machine for SMD Components based around the amazing software OpenPnP. The machine is designed to be low cost and suited towards mid-scale…
I picked up a used portable AC unit that had almost none of the original duct work. Rather than spend $80 on replacements, I reverse engineered the piece I had and designed these elbows to fit my application. Printed out of PETG at 100%…
Print as you would with SillyButt's SLAB parts. The only difference is for the Muzzle A piece, print with the front end on the build plate with supports to build plate only. For the Shroud go here:…
Here I share a bending tool for you. I use this for example voltage regulators and transistors in a TO220 case. With this tool you can bend every pin in the same angle an distance.
I did this to organize all the components of a project work. With this it is easier to collect and find all the components during the assembly or welding process. Each receptacle has a rounded bottom so is even easier take evey component.…
This a catan player's components box, fits inside the original game's box. There are 2 version: v1 - without peek hole v2 - with peek hole (both on the side and on the lid) Great Thanks to RedFrez(thingiverse) for sharing the f3d file…
The mini-reel is a reel for SMD components on cut tape. It is compatible with the standard 7" reels, only smaller. Its capacity is therefore also much smaller: about 1/4th of what a 7" reel can hold. This is a update (remix) from my…
I'm working on a simple sugar rocket and I designed this nozzle starting from the most common nozzle shape I found on wikipedia (the converging-diverging nozzle). You will need a PVC tube with an internal diameter of 22mm and external…
Labeled all of the components to better organize the project. Rotated the model upright and centered it about the origin
This is a component set for the VXE VGN Dragonfly R1 ( NOT SE, Pro, Pro Max). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is reasonably-well…
Accessory that allows safe usage of T12 tips in Pinecil V2 soldering iron.
Get rid of the plastic bags with this organizer! Boxes and lids print as oriented. Triangle boxes will print better with a brim. If the lids are too tight then scale the X and Y axis independently (not the Z) by .1 or .2mm until perfect…
Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…
DESIGN NOTES: Trays are designed to fit inside the box with 2 neoprene player mats (See pictures for how to organize them). All trays are also designed to be usable from the table, cards are tilted for easier pulls, soil, sprouts, trees…
Bigger - 2x1 drawer & body size (fits into "regular" 1x1 drawers) I really needed a bigger version of this great model, so I designed one! It provides additional support for long labels too. Make sure to print really slowly so it fits…
Organize and store your component. There are 2 different drawer available : Drawer 3 Drawer 2x2 For other types of drawers you need to use the original design on the page:…
Diagonal brace for the Ender 3 Clears stock components You will need: 1x 480mm M10 Threaded Rod (Measure before you cut!!!!) 2x M10 Cap-nut 5x M4x10 (Hex head) 5x M4 T-nuts 1x M5x20 (Hex head) M5 Tap With a glass bed I still get full…
Shift file away from white zone on the bottom left if using bambu slicer
A small containers of approximately 1 cubic inch, for small SMD components which can be easily endlessly connected to each other in both directions, to form array of small boxes for electronics component storage. 3D print as much as you…
A beautiful decorative model 🥰 to keep at home or to give as a gift, feel free to rescale the model or print it in different colours.
Note : this design has been updated to mini-reel version 3 . The mini-reel is a reel for SMD components on cut tape. It is compatible with the standard 7" reels, only smaller. Its capacity is therefore also much smaller: about 1/4th of…
Note : this design has been updated to mini-reel version 3 . The mini-reel is a reel for SMD components on cut tape. It is compatible with the standard 7" reels, only smaller. Its capacity is therefore also much smaller: about 1/4th of…
Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later. Use the STEP files if you wish to change the models in some other CAD. Use the STEP or STL files to print as-is. The STEP files may need to be…
The 3rd edition of Nokosu Dice (designed by Yusuke Matsumoto , artwork by Sai Beppu , and plublished by Engames ) introduced additional components. These files are for owners for the 2nd edition who would like to add the additional…
A set of printed components to build a 2WD Robot that is controlled and managed by a ESP8266 microcontroller, packaged as a NodeMCU v1.0 module, and connected to a L293D ESP-12E motor drive module to control two geared drive motors. The…
This may requires some sanding for the sliding to work properly. also the little bump and corresponding dent for the latching mechanism requires some smothing. In the best case just closing and opening a couple times.
Here are some modified components for the death trooper helmet found here https://www.thingiverse.com/thing:1904115 Modified rebreathers that allow room for LED's or tint film New visor inner layer that allows LED fittings or slide in…
Since all of the storing solutions that I've found required too much filament for this simple task, I've decided to design my own. One card can be printed with less than 7 grams of filament and can hold 3 “sheets” of resistors (3x20=60…
Required components and optional add-ons for the Monolith Monitor stand; an affordable, customizable, and extendable monitor stand. Monolith project parts: Cantilever Design Build Guide:…
I purchased a Dust Stopper bucket mounted cyclone and the 2.5" hose was too heavy and kept making the bucket tip over so I wanted a more stable solution. I also didn't want to take up more valuable shop space so I opted to stack the…
Ruler with electronic components for university/work. Includes: circle ⌀10, switch, resistor, capacitor, voltage source, inductor, diod, letter ‘’V'' and ‘’A'', dot. Printed 0.2mm height, 15% infill, PLA+ Perfect with 0.9mm mechanical…
GCODE ONLY FOR MATERIAL AND PRINT TIME ESTIMATE The original idea was a toy to get a child into pc building, but in my opinion, the result also makes for a great decoration. For a better look, I recommend to print with multiple colours.…
Designed to fit the Sovol SV06 platform to elevate and strengthen original injection molded parts. This set stiffens and tightens the rod tolerance as well as offer a more refined version of the original parts. This elevates the build…
These are supplemental components for the Portal 2 Turret model posted by whosawhatsis: https://www.thingiverse.com/thing:8277 and used for the Sentry-Picam project: https://github.com/TinkerTurtle/Sentry-Picam The RPi components are for…
Box with drawers mainly for electronic through-hole components like resistors, but can be used for other stuff. Main difference from other models here: space and filament efficient (designed exactly for my needs) drawers have safety stops…
A remix of NeilW's excellent modular drawer divider system that exploits cheaper material (hardboard / plywood) for the walls and uses printed parts for the connectors. Instructions: Cut your walls from your choice of sheet goods: I used…
I used ASA filaments with good results. The scale standoffs also provide holes for 4-40 brass threaded inserts to be melted in place with a soldering iron. Likewise, the carriage sensor mount also uses the 4-40 brass threaded isnert.…
Introduction: SteveT did a great job collating parts and doing a writeup of the assembly, I just didn't pay close attention when buying parts and ordered the wrong bins. These were branded “Kichly” rather than “Skroam”; the biggest…
Inspired by: SMD Connectable container I use the small boxyes above for all my passives but needed something for connectors, screws, chips and pinheaders. In my setup multiple boxes are combined as needed and then kept as one tray of…
These ae additional parts that are required to complete the Crazylite 7 assembly and are used on all versions. In this listing are two x-axis end stops, one for early Ender 7 s (mk1) & one for later Ender 7's (mk2). This part replaces the…
So this is a dummy version of a quadcopter with all compoenents like Camera, ESC etc built in CAD
Instructions I'll add some more versions (and better images) of this later as I fill up my cases and see what my need will be, but you can always grab the Rhino .3dm file and modify it yourself :) Update: turns out 3 compartments only…
Components to replace your BUS boardgame ones. Use an infill of 30% or higher to add some weight. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: Any PLA Any Category: Games
I removed the “extra” compartments from the locations bin and added a separator for the dashboards to hold the Sinister Six boards. I also created token trays to be placed in either the dashboard boxes (4 trays) or the location box (6…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … The hour and minute hands are two complex assemblies of…
This model is compatible with the lego system.
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. If you don't have a box to store cards, components, and other items, this is the model you need. The size 70x90x35 mm is suitable for all…
I designed some different organizers for the upgraded 3D temple models designed by pastaclub on Thingiverse. The temple models are included in this post. Printer: Raise3D E2 Filament: Pla layer height: 0.2 Profile: standard print
A set of replacement components for Raiders of the North Sea boardgame. Print instructions Category: Toy & Game Accessories Summary A set of replacement components for Raiders of the North Sea boardgame. Print Settings Printer: Artillery…
I have adapted this great model to my needs. The remaining parts can be taken from the original. Print with settings from the original! The side parts are held together well by DIN rails, but I added two screws with inserts to be on the…
![Sovol SV-06 Reinforced Y-Axis Components (+7mm Elevation) [LM8UU Set]](https://media.printables.com/media/prints/727854/images/6385196_83479a1d-618a-4456-956d-4c8a23418ad7_6dcc93ad-97be-4526-b501-dcebaeabd34b/20240303_143619.jpg)
