9,757 models
Este es un test de retracciones muy sencillo en el que se intentan probar distintas situaciones y distancias. Además, si el logo de Control3D no sale, puede ser indicativo de tener las retracciones altas Abriiiiiiiiiizos Te dejo por aquí…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…
Print approx. €5.95–€7.28 excl. taxPreliminary estimate for one variant
An controller stand for Xbox one/series x/s and PS5 controllers. The stand is based on a stormtrooper from starwars
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Print approx. €6.09–€7.44 excl. taxPreliminary estimate for PETGSource material: PET
Os dejo aquí uno de los ejercicios de la Academia Online Control3D como es un llavero giratorio multicolor. Esta sencilla pieza se puede imprimir tal cual, con cambio de color (M600) o con algún sistema multimaterial como el MMU, AMS,…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Very simple yet good looking PS5 controller stand. This stand is a perfect fit due to using a 3d scan of the controller. Minimal size with no supports or brims needed for easy print.
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. Read the tutorial:…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
Print at .2-.28 layer height. 10-15% infill. Used Polymaker Black PLA. Check out my other stuff on Patreon at https://www.patreon.com/PlaGROUND or linktr.ee/PLAGROUND
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for one variant
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
I used a 3D scan of the PS4 dual shock controller and used it to create part of a negative mold to better fit the controller on the stand. here is a stand for single controller and one for 2 controllers. When printing rotate the model so…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. ¨ Read the tutorial:…
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
Hi! I didn't find any perfect fit low profil controller mount for my SKADIS pegboard so I did one myself. I designed it around a controller 3D scans so that it can be perfectly ajusted while remaining as discreet as possible. Controller…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Use this mount to hold your…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
A Holder for the Xbox Controller for the Skadis pegboard. The 2 Hooks slot into to 2 parallel holes on the Ikea Skadis and hold the controller securely.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Made this stand in PLA to hold my controller and make my setup look more organized. Printed the feet in TPU to gain friction so it won't slide around on the counter.
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
Want to have a cool place to put your headphone? Print yourself this nice retro item! All parts are seperated so you won't need a MMU, just print them in your desired colors. Assembly is pretty straight forward, just put all pieces…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
8BitDo Pro 2 Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to @lowsc0re for the creation of…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
A simple and small control knob for the Ender 3 and Ender 3 Pro. PRINT SETTINGS Nozzle: 0.4 or 0.6 Layer Height: 0.20 or 0.3 Infill: 20% Supports: NO Material: PLA+
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Description Prevent your Switch Pro Controller from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Just a slight remix of Chewbugga's post (https://www.printables.com/model/258864-xbox-one-x-controller-wall-mount). Added a bracket to hang the controller on top of the Xbox Series S.
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This is an original design that prints fast. It fits Xbox Series S, X, and One controllers perfectly. It could fit other controllers too. Print in your favorite color and put stickers on the flat front, or model a raised logo in…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
I remixed this good looking mount, added logos, Honeycomb wall mounts and a cable holder underneath. I don't like the cable holder all that much (it works but just not great) and may take it out of V2. I hope you enjoy it. Recommend…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
I like my controller to be stored out of sight, but still reachable from my chair. I recently discovered a model that would hang the controller by the joysticks. However, there is speculation that this will induce drift into the sticks…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
A useless box that uses a single moving arm to press multiple switches. Partslist and build instructions: https://blog.hirnschall.net/diy-useless-box/ Video of the box in action: Print using a medium quality preset (0.2mm layer height).…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Remote control holder Midea
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Introducing the Wire Lock Block for Xbox One S controllers. A simple 3D printed battery pack and cover that prevents the USB cable from being accidentally disconnected mid-game. Optionally the battery pack has a screw hole so that it can…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
This stand houses three remotes.
Print approx. €2.26–€2.77 excl. taxPreliminary estimate for one variant
I do use an enforced support for the center part of the shell only. (see pictures)
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! After taking a 3d scan of my mini+ I set it into a controller design I made. This gives it a perfect, yet tight, fit so…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant
This Remote Control Renault VAB 6x6 scale 1/10 is made of 109 parts printed on my i3 MK3. The biggest parts (front and back are about the size of the print area. The weight of material (ABS/PLA) is above 1Kg. The size of the truck is…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
nice looking knob for controlling your PRUSA printers. Print instructions can be printed in any material, but i recommend PETG, and keep the layer height low to make i nice looking. if you want it extra nice, try to lower the acceleration…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
Replacement parts for Nacon Revolution Pro 2 Controller. Trigger R1, L1 Trigger support R2, L2 Print instructions Category: Electronics Summary Replacement parts for Nacon Revolution Pro 2 Controller. Trigger R1, L1 Trigger support R2, L2…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
STC-1000 is a nice little temperature controller that can be used to control both a heater and a ventilation in an enclosure. 12V and 220V versions are available for 10-15 EUR (Amazon) or $3-5 (AliExpress). This box is designed to be…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant
Print with fuzzy skin and enlarge to 110% if it don't fitt. i printed in pla+ and TPU on the top.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
wall mount for quest 3 controller
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for one variant
SNES controllers are inherently stackable, so this holder takes that feature to the logical conclusion and makes it possible to store the controllers neatly as a single stack.
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
Bose A20 Control and battery holder
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for PETGSource material: PET
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
The gcodes are exported for a Prusa i3 from the demonstration site for Full Control GCode: fullcontrol.xyz I didn't change anything from the gcodes except from suppressing the initial purge that was done mid-air. The initial path seems…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Double PowerA Nintendo Switch controller stand
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
You can use a 3M Command™ strip to affix this to the side of your coffee or end table. A rubber band around the gear will give it more grip. I've included the gear as a separate model so that you can print it in a separate color. Also…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
PRINTER : Kobra 2 pro BRAND: Anycubic MATERIAL: PLA LAYERS: 0,2 mm INFILL: 15% BRIM: No SUPPORT: Only on Base and Base Slide (look in pictures) PLS READ ALSO TEXT DOWN BELOW!!! UPDATE: updated versions with better fit for IP 13/12 mini.…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
This a slim and subtle remote shell for the Apple TV 4K remote control. With the Apple TV remotes being annoying smooth and symmetric it can be hard to tell the orientation without looking, and slide around more than my liking so…
Print approx. €0.85–€1.03 excl. taxPreliminary estimate for one variant
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
A stand for the easysmx x20 controller and its receiver. Basically like the original . I just added a cutout in the back of the stand to safely store the receiver of the controller, when not in use. I printed mine on a CoreOne. The sides…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
It is a keychain for DJ or others
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
If you need to mount a GoPro (or any other camera) on your Traxxas TQi controller get that model and print it out! The camera mount is at 30° angle to let you navigate your RC model freely. I've tested it with GoPro 11 and 11 mini - at…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Printed without support with cylindrical pins (3mm diameter, 14mm length) you can connect multiple of these units together. CAD Model…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
This is the same model from TitledMag but with some fillets added to soften the corners for clumsy people like me. All thanks to TiltedMag for the great design!
Print approx. €5.02–€6.14 excl. taxPreliminary estimate for one variant
8040 extrusion cockpit mount for SimJack Control box. You can print just 1 but 2 work better.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Remember to remove the support material from where the Command Strips go.
Print approx. €3.14–€3.83 excl. taxPreliminary estimate for one variant
Remixed the body into a Zakk Wylde style body. Each part of the body needs to be printed with accent+main on the same buildplate. I used this tutorial to do the trick: https://reprap.org/wiki/Multicolour_printing_with_one_hotend Good luck!
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Support de télécommande tournant sur 360° Ce projet comporte 3 fichiers. Base.3mf Entretoise.3mf Bac.3mf le fichier support télécommande complet , regroupe tous les fichiers. Disposition sur la plaque d'impression: Paramètres d'impression…
Print approx. €7.40–€9.04 excl. taxPreliminary estimate for one variant
This is a very simple trim that will hide the screw holes when converting from an old Truma CP to the new Truma Inet X panel. This trim is 1.25mm thick, 124mm outer width (inner hole width 108mm.) Outer height 97mm (inner hole height…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A colleague had some spare 120mm RGB LED pc fans lying around and he asked me if i could create a holder for them to be used as a ventilator. He wanted to be able to control the fan speed and the LED color as well. What began as a quick 1…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Don't loose your Steam Controller dongle! Uses clip from HpInvent's design, but with this one you don't have to worry about losing the clip itself. Inserting dongle into the case You need to insert the dongle USB first at an angle. It's a…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I removed the arms from the original model and replaced them with mounting guides and holes for m4 nuts. On the back, I use a standard aluminum t-nut, but a printer version will work just as well. I've had bad luck with mounting arms on…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
When the rubber on the thumb-stick wears down, just print a new one? Clean off all the old rubbery plastic from the thumb-stick first as this is a snug fit so that it does not move around or fall off. Put the cap on one side then ease the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
I decided to make this because i was sick of not finding the remote controls i have made this with 3 perimeters and 15% infill and in PLA i found that printing it on its side and with organic supports worked fine for me this actually…
Print approx. €10.40–€12.71 excl. taxPreliminary estimate for one variant
Box for housing the light switch and routing cables to lights. Mounts via double-sided tape on top of the MK4 power supply with extra brace around the frame for rigidity. The cover plate is attached by M3 screws which cut treads into the…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
USB volume control. Made for the Digispark and KY-040 rotary encoder. Code used https://github.com/Bluebie/volume_knob
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
New body for famous Media control volume knob ! Sleek, minimalistic design Perfect fit for rotary encoder and Arduino Micro No glue needed ;) Please read tutorial for wiring and programing arduino :
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Kombinace s logem
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A simple Jarolift Remote mount where you can still use the controls. To mount it, you can use 2 small countersunk head screws
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
Com esse suporte você pode fixar os controles na parede ou em móveis. Fácil de imprimir e usar. Use Super Glue (Super Bonder, Araldite ou outra de sua preferência).
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
Remote control case. Two versions, one with buttons. The other version only has holes. The case is designed to prevent accidental button presses in your pocket. perimeters: 4 layers: 0.2 I look forward to seeing photos of your prints. :-)
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
This looks super cool. I recommend using 25% infill otherwise when you remove the supports it will be to thin and break> You can even go 50% infill if you want but no more than 50%. Break the supports off carefully. You can use tpu if you…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
This model will be exclusive in my Printables Club for 3 months after which it will be released with my other free models. The premium version with all 4 consoles is available on my Printables Club or in my Gumroad Store . This is a…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
The box fit with an existing claber irrigation control system (this is the 8425 aquauno pratico) that drives a solenoid 9v valve. The original one has a simple start/stop button. Here I used a ESP8266 with tasmota firmware, a DC-DC…
Print approx. €4.63–€5.65 excl. taxPreliminary estimate for PETGSource material: PET
A protective case with a cable clamp for a XH-M604 Lithium battery charge controller. Note this a new design and I will not be able to print this for a few weeks but if some one wants to have ago please feed back if all dimensions are OK.…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
Modification in pruca slicer by adding holes using the subtract shape function
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for PETGSource material: PET
led light controler holder
Print approx. €1.94–€2.38 excl. taxPreliminary estimate for one variant
I removed the arms from the original model and replaced them with mounting guides and holes for m3 screws. I've had bad luck with mounting arms on skadis parts, so I've started replacing them with the m3 bolt / nut solution. Print…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Kresleno v PTC
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
