Wingnut Cover for Crutches
Wingnut Cover for crutches. I kept catching the wingnut on clothing and other things. This helps protect you and and you clothing from catching. Can also be used to help turn the wingnut.
- Downloads
- 38
- Likes
- 2
- Rating
- 5
158 models
Wingnut Cover for crutches. I kept catching the wingnut on clothing and other things. This helps protect you and and you clothing from catching. Can also be used to help turn the wingnut.
Give yourself a couple of nights off, break a leg. Stool is 20% scale of https://www.printables.com/model/168889-mammut-stool-ikea by hesam. Plaster cast needs to be scaled to about 97% for elves without feet.
This is a crutch for a Barbie, the measurements are based on the basic model of a Barbie (the cheaper ones), however there are two versions of the base crutch, one for the barbies that are taller and a shorter version of the crutch for…
I just broke my leg and got my first set of crutches. So naturally while waiting for surgery to install screws and a plate into my leg I needed to check out what I would want for 12 weeks of crutches. This brought me to the beer holder…
Remixed from the original design by Fredrik_JBE as found here: https://www.thingiverse.com/thing:1673376 , but I made it suitable for 22mm crutches. Credits to the original designer. I printed two of them in PETG and they 'stick' enough…
This is a hook which clips onto a crutch, with the purpose of holding a bag from the crutch itself. I had an accident recently for which I'm now in crutches and wearing a bag isn't safe so I was after some way of carrying things without…
This is a modular system for crutch accessories. Inspired by @NikReitmann_10557 's design. Tried and tested on various Christmas markets. 4 M3 screws + nuts required. You can edit these models in OnShape. Check the “Features” panel on the…
My friend needed a way to hold her water bottle while moving around with crutches so I designed this for her. Will fit a bottle with about 80mm of thickness or less. You can also throw your phone or anything else into it. I print it with…
Resolution: 0,2 Infill: 20% Material: PETG You need additional: 4x Screws M6x25 4x Nuts M6 You can clamp the bottel holder to crutch-diameter up to 20mm. More designs: https://step-3d-druck.de/impressionen 3D-Printing-Service:…
PLA reicht völlig aus, ich drucke mit Stützen, da der schräge Teil sonst nicht perfekt wird. Infill ≥50% PLA sufficient, use supports.
I made these to help someone that currently has to use crutches. They have a diameter of 20.3mm. I wasnt happy with the available designs because they come loose on their own to easily, so the clamp here actuallly uses a fine M12x1…
My wife has been on crutches for a lot longer than we were planing. I finally got around to designing a decent cup/phone holder that secures inside the crutch so that she can get herself water and be a little more independent. Designed…
A desk-mountable clamp with an attached holster to hold a crutch securely. Made to help a colleague who needed to use a crutch while at work, but there was no good way to keep it nearby while sitting at a desk, as it would keep falling on…
Der Halter verhindert, dass die Krücken ungewollt umfallen, wenn sie an eine Wand gelehnt werden. Der Halter ist für Krücken mit einem Durchmesser von 22mm gedacht. Für einen besseren Halt muss ein 1mm dickes Stück Moosgummi in die Halter…
Required for this model: 6 m3 nuts, 1 m3x8mm, 4 m3x20mm and 1 m3x12 Printed at .2mm quality on a mk3s+ You will have 2 clips once which is 25mm and one which is 22mm. Put in each hexagonical hole a m3 nut then use the 25mm clip base…
It may seem a little morbid, but Child life is all about normalizing medical conditions and in the context of cute little ghosts, there was very little ability-diversity. they were made by a local college student and by their admission…
The rubber tip should be printed in soft TPU with as thick a wall as possible. Whereas, print the inner disc from a hard filament, e.g. PET-G, and press it inside, because the tube rests on it. My grandmother has been using this printed…
Specs Fits: 22mm (7/8") leg (what the hospital gave me) Filament: SainSmart 95A TPU (if you experiment with other shore hardnesses, let me know! Lower shore hardness will probably be closer to actual crutch tips) Printer: Bambu X1C Print…
My kids got a Playmobil Children's Hospital playset for Xmas but didn't have enough crutches for the number of extra playmobil kids they had. So using a caliper, I measured a crutch that came with the set and then modeled it. The crutch…
Crutch clips to hold your crutches together tightly! Use 3 walls so the clips can flex. The diameter of the clip is 19.5mm which should work with normal underarm crutches.
This is a crutch for a Barbie, the measurements are based on the basic model of a Barbie (the cheaper ones), however there are two versions of the base crutch, one for the barbies that are taller and one shorter version of the crutch, for…
Wall mount for one forearm crutch. PETG and a little more perimeters and infill are recommended.
If you have to use french crutches then you will need a places (points) where to hold off your crutches for a while. The holder is composed of 2 parts - table clip and crutches clip. There are two sizes of clip (25 and 32) based on the…
Fácil de Imprimir! Modelo fácil de imprimir de una muleta para tu dedo, por si cojea o esta en recuperación. Imprime y disfruta! Si te gustan mis modelos, comparte tu make y déjame un comentario/like! Me ayuda mucho.
This object was made for a school project, we were tasked to pick a medical device and turn it into something else. you will need a couple of tubes about 210mm long and 21mm in diameter the trigger is held in place by a bit of filament.…
Crutch holder Made to fit 22mm tubes. Printing Print with the flat surface down. Should not need supports. Mounting Use zip ties to lock one of the sides to one crutch. Avoid tightening it too much. It is only meant to ensure that this…
Replaceable tip for crutches with a 7/8" dia or 22mm pipe shaft. It's a tight fit, but won't slip off like some of the other ones. Seems to work quite well. I added in a slot at the bottom to drop in a washer for a ½" bolt for the crutch…
This is a cell phone holder that clips onto a pair of crutches 19.2mm diameter tubing. It is sized for an iPhone 13 Pro Max in a case, so it should fit almost any phone. Can be clamped to itself, or through an existing hole in the…
Specs Fits: 22mm (7/8") leg (what the hospital gave me) Filament: SainSmart 95A TPU (if you experiment with other shore hardnesses, let me know! Lower shore hardness will probably be closer to actual crutch tips) Printer: Bambu X1C Print…
Click-in clamp for 20mm crutches on one side, screw fixation on the other side You will need two threaded inserts M4 and two countersunk screws M4x20. No support needed. Print in PETG, it needs some elasticity. Pressing in a crutch on the…
use at least 60% infill to ensure durability on the bottom
this is cute little crutch for dolls or stuffed animals
I just made the crutch holder longer (2cm between clamps)
crutches hanger or bag holder 23, 25 or 35 mm to be able to hang the croutch securly on a chair or other things
Just resized Fredrik_JBE's design to fit crutches with Ø25mm (diameter). I printed with PETG and 10% infill. Never tried PLA. EDIT after using for a few days: Tried using this - the distance between the the crutches needs to be increased…
These holders let you mount your Crutches to the handlebar of your knee scooter. Designed for two M5x16 bolts and nuts, but the length of the bolts depends on your actual handlebar diameter. Models are uploaded on behalf of Scharada, who…
See photos for installation instructions. Owl-Reach is a crutch-mounted accessory designed to solve a practical challenge: managing a grabber tool while using crutches. It allows you to carry a grabber clip hands-free, so you can reach…
Hier ein Krückenhalter bzw. eine klemme so das man 2 Krücken mit einer Hand halten kann. Ich habe diese mit hartem TPU gedruckt A98 aber sollte mit PETG auch gut gehen. Rohrdurchmesser ca. 20 mm Here is a crutch holder or a clamp so that…
This is a mod For the original Recreator 3D MK6 Fun Size, please visit https://www.printables.com/model/352729-pet1-plastic-bottle-filament-maker-with-the-recrea Is your gear skipping? If the second double-gear is skipping against your…
Ne laissez plus vos béquilles tomber Le support qui s'adapte sur les tiroirs des commodes, et qui peux enfin maintenir une ou deux béquilles… ✅ ces différents supports se fixent sur le tiroir de votre commode, simple ou doubles, ils…
remix of: Broom Bracket by: Dezign-it remix of: Skadis Table Clamp (Long) by: aspoon me needed a design to attach crutches to a desktop, in a mobile version *.3mf included lemme know what ya think bout it 🤞 plz share ur makes ❤ ==> check…
I got into a serious accident a few months ago and I remixed this crutch desk mount so that my crutches don't move around when I need to grab them. The mount is extremely stable and allows for one-handed use to get the crutches out. It's…
This is a clip-on cup holder for a friends crutch. I modeled this using Fusion 360 and left a .step file attached. Category: 3D Printing
After spraining my ankle I found out exactly how hard it is to carry things while on crutches. I found a number of water bottle holders and similar things on Thingiverse but there weren't many simple mounting brackets. So I put together a…
I found this model on thingiverse and re-uploaded it here as when looking I couldn't find anything like this here
It's a Crutch pad for Aprilia Tuareg 660. It prevents leaving traces of aluminum on the ground and protects the aluminum stand. Fixing by adjustment. Print at a pitch of 0.4 in PETG or ASA. C'est un patin de béquille pour aprilia Tuareg…
A month ago, I broke my knee (took an arrow, haha!). Since then, using crutches has made it difficult to carry anything with me. I came across Hobb3s's “crutch bottle holder,” and it was a game changer. However, it couldn’t fit my big-ass…
Clip that holds together the standard aluminum crutches hospitals and doctors give out. Keeps them snug together to help with storage, moving them, and makes them easier to handle. I suggest printing two clips and permanently attaching…
While my daughter was home for winter break, she challenged me to make something that would attach to her crutches and hold her coffee so it wouldn't spill. This design is based on an older one I found, but it's print in place and minimal…
For each crutch you need an aluminum tube with a diameter of 10mm and a length of about 18cm. The three parts and the aluminum tube were glued together. Please mirror the model to get a crutch for the right side. Printed this one in ABS.
Držák na berle k handbiku COMP modelovaný v Onshape volně stažitelný k úpravám. Chrutch 22mm, tube 22mm. 3x Screews M4 lenght 40mm. Velcro 20mm lenght aprox. 200mm.
Introducing the TPU crutches top pad with no supports needed! Satisfying fits securely into place. Cushions your underarms quite effectively with squishy chamfered edges. Including some notes below to make sure this is a success for you.…
Sometimes we all need a bit of help :) this lil crutch can support your green friends who can't quite hold themselves up. Scale up or down based on your needs! The tiny ones are so cute
I made this design to put together pretty easily. It can be easily put together, so if you don't want it to come apart use some super glue. I've included the 3mf for a Prusa mini, although this was designed to be printed in a Bambu A1.
Recent events had me on crutches - this is meant to be a system you can snap on and off attachments to the side of the crutches. The “crutchHolderBase” attaches to the side of the crutch using a #8 bolt, a washer, and a nut. The…
EN: (google translator) I solved the simple attachment of the holder for 2 crutches. I was inspired by the original model, but it had to be completely redesigned. The holder did not fit due to the collision of the crutches with the wall.…
This is an adaptor for this crutch holder clamp https://www.printables.com/de/model/702360-screw-clamp-crutch-holder-o203. All of the files need to be printed except of the crutch clip, which is the part i modified. The clip attaches to…
A simple ferrule for a crutch. The original piece I used for take the mesurament have an internal diameter of 19mm and have some “bump” for better gripping. I attach an .step file if you want to adapt this model for another model of crutch.
This an everyday item for people who use crutches. It helps store items when you are traveling like: keys, pens, pocket items, wallet, etc. *Supports Suggested*
I sometimes need to take my crutches with me when using my rollator (to help with steps etc), and found that to buy a holder for my make of rollator was going to cost nearly £70 for the pair!! So do I but them? Heck no! I nab my partners…
While in Norway in the winter, the roads tend to be extremely slippery and people may end up with a broken leg, hopping along on crutches for a while. During this time, it's not joyful to go to the kitchen to grab a can of soda (or…
This piece is meant to be attached to the end of a ¾" stake, and then screwed in with any-old screw. It will nicely prop up a tree branch in your garden. You can print it vertically, which won't require any supports, or you can lay it on…
Crosshair for walking crutches just for fun :D. Printing in PETG. Diameter 19mm.
rolling crutch for use with your joint papers you can spread your green out on
One can mount this box on a crutch, so it's possible to carry small items. PETG is better in this case - it adds some elasticity needed to mount box correctly. No supports needed.
Crutch Tip Object is fully copied from existing tip of Crutch. Diameter of inner hole is 18mm. I slipped proper size washer in hole of tip before slipping crutch in to it to prevent cutting effect... When slicing enable support because of…
Print the parts and mount it on the 20mm crutch / pipe with 4 * 3mm 20mm screws with nuts
This is a bottle holder that can be attached to forearm crutches with a barrel diameter of 22mm. I created two versions for standard german beer bottles, one for 0.33l (up to 62mm diameter) and one for 0.5l (up to 70mm diameter). Caution:…
fits on pipes with diameter 20 mm. I printed in PC but PETG should also be fine. Use M4 screws to clamp on and of course wiggly eyes.
My son used crutches for a while and the original rubber tips were completely worn out. I've made a model of replacement can be printed of TPU. I managed to print it of FiberFlex 30D TPU which is very soft which corresponds about 80A.…
Useful tool when walking with 2 crutches and need to stop for a while for some business where hands are needed. (I put mine in bathroom) There always gonna be struggle that crutches are sliding away so by using this little hangar I can…
Crutches locking pin (for 22mm crutches) that uses a M6 bolt (hex head) as the pin. Print 2 pieces of the same file, insert the bolt into the slot and glue the pieces together (I used CA glue). You might file the bolt a bit for easier…
Securely holds a cup/bottle and phone. Designed for easy removal and install. fiction fit on lower tapered section of crutch. Mounts low so you can use it with taller bottles and cups. Suits 19.5mm aluminum tube style Crutches. I printed…
During my ankle joint fracture, I have come across different annoying situations with my crutches: leaning them against the wall (down they go) awkwardly holding crutch number 2 while using crutch number 1 to support myself during a stair…
With my crutches I had difficulties opening/closing doors and pushing pulling chairs. Yesterday I said I need something clamped on the crutches which could help me in my daily life... here it is and it made my life so easier!!! The…
A Drink/Can Holder the slips into handle of a crutch Has holes for zip ties if it needs a more secure attachment
This add-on to your crutches will make you the star at parties. The Mount was designed for crutches with a diameter of 22.3mm but should accomodate crutches from 21.4 to 22.5mm in diameter (untested) This holder is required to be mounted…
We worked closely with the Vikings creative team, talking about how to fabricate props and make them look as detailed and realistic. This weeks 3D prophecy item is a metal brace. It was a very difficult prop to execute. The 3D scanner had…
A very basic eyeglass holder for crutches or IV poles with a diameter of about 17mm. If printed in TPU, the range of fit will be a bit more than in PTEG. I do not recommend PLA as I feel that it is too brittle in applications using a…
This crutch holder has been designed for a 22m diameter crutch and the Veldink4kids/ottobock classic wheelchairs. It is designed to be printed in 2 parts flat and then melted together with a soldering iron and some spare filament/ failed…
Wall bracket for storing wall-mounted assistants. Consists of 4 parts. 1x rubber 1x holder and 4 pins. Please print the rubber from TPU.
Its a holder for crutches dual ore singel use made with PLA Needs suport Problems ask me you have to tape some foam rubber for better gip
My grandmother walks on crutches these days. Every time she sits down, she leans them against something. Sometimes they slip and fall. She always tries to pick them up herself “because she needs to be able to do that”. This poses a risk…
I will need a replacement handle for my crutch, and wasn't satisfied with what I'd found so far. So. Just a simple crutch handle, meant to be printed out with some flexible filament. (I'm waiting for mine to arrive so I can get printing!)…
Tray with cover for mounting on crutch - for those unfortunate to slip on the ice or similar. I put a text on the lid in OctoPrint, so it's not in the model. Apparently, this model is made for German cutches, 20mm thick and Norwegian ones…
Hook for hanging 20mm-diameter English crutches. It allows crutches to be held alongside a bed (here, an Ikea bed). The diameter of the crutches is 20mm. The third hook is 16mm in diameter. See illustrations for dimensions. ___________…
I modified the original model to make it compatible with the washer (27 mm) from my crutch. I paused the print at layer 93 to insert the washer. I used TPU with 20% infill and a 3D honeycomb pattern — other infill patterns will probably…
My kids like to play all sorts of things. One of them is beeing medical staff and treating others. So of course every once in a while somebody has a broken leg which needs a cast or something and then they also need crutches. I printed…
Original part on the wheelchair was cheap injection molded part that split in half after normal wear and tear. Needed a replacement part but could not locate the exact part or even what it was called from the manufacturer. Took the…
I need two forearm crutches but wanted to be able to have a hand free without having to hold both crutches in one hand. So I created this belt clip that I wear permanently on my belt for a few months now. I created a second version that I…
With my crutches a was always needing someone to serve bring my coffee outside… Now with this little cup holder I'm totally autonomous!!! Of course I have to go slow, to not spread the coffee everywhere ;) The uploaded stl is for a 22mm…
A small clip that means you'll always have a lighter handy with your crutches!
This is my second crutch add-on, the CrutchLite™. If you're going to be on crutches for awhile, you might as well upgrade them with aftermarket parts! This is a holder for those little cheap finger led lights you can get at the dollar…
This is a cup holder that snaps on 22mm diameter crutches. I use it with an Emsa thermo cup as seen on the picture. It is 70mm high, the bottom has an inner diameter of 70mm and the top has an inner diameter of 80mm. This was a quick…