1,211 models
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- What? The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for PETGSource material: PET
The photo shows the original cover and a copy together with the tractor :-)
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET
I previously built my own version of JKTech's printer enclosure using MDF instead of aluminum extrusions, so I had to modify this to fit my enclosure. I adapted the main body so I could screw it directly to my enclosure frame.…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…
This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…
I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…
INTRODUCTION This is version 2 of the design backporting all the learnings from the release of EMS 300/350. The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another printed mount for each of the…
I have been looking for a electronics box that has the lid on the underside of the printer but I have not found one so I made one myself. I have include the cad files so you can make it your own if you want. Whats in the box? 1 Raspberry…
The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.
After trying various electronics enclosures for my Ender 3 Pro, I was not happy with many of them due to various issues with each Fit was tight and not very forgiving for running cables Airflow/cable management were usually afterthoughts…
Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…
a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.
Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front control panel, Raspberry PI 4 and a buck converter to power Raspberry PI. Included in the files is…
Updated design! Made for my specific needs, but you can enjoy it as well. Click here for the previous version. NEW: Place for the BTT 24v UPS Detachable back door for the wireing Exhaust fan 2 on/off switches Holes for cable management…
An OpenSCAD electronics enclosure designed to hold one rectangular PCB. The default settings are for the following: -PCB w/ 100mm x 40mm mounting hole spacing -SPAX #8 1 in. pan head screws for cover -M3-0.5 threaded heat set inserts for…
Basic parametric snap fit electronics enclosure / box. Printable without supports. You can size as you like using user parameters in Fusion 360. F3D file supplied. When exporting STL / STEP, it will already be orientated ready for…
Simple holder for Wera electronic screwdrivers.
This is a full model build of a Tron legacy disc desktop display including circuit python code to light it up. The Base was created to be printed on an MMU and I'll add a tutorial on how to create the whole piece shortly. I printed the…
⚡ Introducing the Millennium Machines Universal CNC Electronics Box The Universal CNC Electronics Box is designed to simplify, standardize, and streamline your CNC’s electronics setup—no matter which machine you’re running. Whether you’re…
With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…
rack suitable for network switches up to 8 ports
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors. Print instructions Category: Organization Summary This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to…
Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted. Here is an example how to use it: You just…
I really liked the stackable electronics mini - rack but it wasn't tall enough to fit the mini PCs I needed to put on it. This is a remix that is 25mm taller. It is the same length and width so you can stack the originals and this taller…
NOTE Updated V2 of the frame for the Voron 2.4 has been released. Please use that as it has a number of improvements. https://www.printables.com/model/816080-ft-ems-v24-350-v2 The cable ducts that were designed for EMS 300 have now been…
This is a simple holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series. Print upright (with the cable cutout on the build plate) and supports on the build plate only. 15% infill works fine.
INTRODUCTION This frame was designed to help manage the electronic components required for a switchwire conversion (SKR Mini E3, Creality boardes, Raspberry Pi, U2C boards etc,..). Typical conversions have you squish all these components…
I needed a box for a three AAA batteries for my electronics project. Couldn't find it so I made it myself. Enjoy.
I've insulated my printer and found that the electronics area compromised the heated chamber. This divider will help to separate the electronics from the chamber air. Will not make it air-tight, but add a blockage to the convection path.
This was a HUGE project that took me a LONG time to design. I wanted the cleanest Anet AM8 conversion out there. No wires showing, all the electronics hidden, a rock solid frame, silent printing, and the cleanest looks you could imagine!…
This piece is to support the wire channels when doing inverted electronics mod on a Voron Trident. I wanted to keep everything neat and allow an easily removable bottom panel if necessary. ABS or PETG recommended. Check sizing against…
The Zaribo ZLC kit comes with a BTT Octopus Pro, but I wanted to run Klipper and have things as tidy as possible. A BTT Manta M8P does the job but is slightly larger and has different mounting holes. I remixed the Zaribo case to suit the…
The Ultimate Teardown Companion Whether you are repairing a smartphone, tearing down a laptop, building a custom keyboard, or working on RC gear, keeping track of different screw lengths and tiny components is the hardest part of the job.…
INTRODUCTION Due to popular demand I've designed the frame for a Voron 2.4 300mm build. The cable ducts will be added very soon. The mounts for the electronics should work but I will be adding further CAD images to illustrate. THE DESIGN…
A small box for electronics projects with 6mm diameter wire holes on each end. The top and bottom friction fit together so no glue is required. Outside dimensions: 55mm x 35mm x 14mm Inside dimensions: 52.5mm x 32.5mm x 11mm
An in OpenSCAD designed electronics organizing grid-box system. You can export a box of any size. All boxes are stackable. The outer size of a box is always a multiple of the size of the base unit (1x1x1). Have a look at the Github…
The main body has areas that can be glued and the the pi becomes somewhat structural once installed without the covers. The electronics cover has new little tabs for m3x12 or longer screws to hold it together.
This is a small parametric universal electronics project case with PCB mount posts in FreeCAD (0.20.2). It uses very little parameters in the attached spreadsheet file (width, height etc.). Vents are automatically stretched and…
Hello and welcome to 3Drcnc! V2 is out now: https://www.printables.com/model/337042-3d-printed-open-soure-rc-snowmobile-v2 This is the OP3D RC Snowmobile project (Open source 3d printed rc snowmobile). A project that I've been working on…
This is a remix of Teaching Techs Ender 3 all in one, universal rear electronics case. Things that are different from the original design by Teaching Tech: I adjusted the cutouts for the original and SKR E3 Mini 1.2 Mainboard, because I…
I needed something to use as the basis for electronics projects. Prints without supports, and is easily modifiable for electronics projects. (F3d file included) Both parts print without supports. Print the box the right side up, print the…
🔧 Electronics Garden Gnome – The Circuit Whisperer! 🧙♂💡 Meet the most electrifying addition to your garden or maker bench – the Electronics Garden Gnome ! Armed with a trusty multimeter, a soldering iron, and a pocket full of tools, this…
This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.…
This 3d printable frame mounts in the electronics bay of the Voron V0.2 using the six screws that hold the panel that separates the electronics bay from the print volume (use 2mm longer screws). NO VHB TAPE is used. It provides mounting…
A fully enclosed tenting case for Silakka54 split keyboard. Fit nicely around the USB port and the jack connector, has slim edges. Keyboard is press fitted and the electronics cover is screwed from the bottom. Left side file provided,…
This is a remix of a remix. The original idea is from this Remix on thingiverse from vfrman. A rear mounted electronics case for the Ender 3 or Ender 3 pro. It includes space for the following parts: A Raspberry Pi 3B+ The original Ender…
Printable version of electronics cover for E3NG, https://www.printables.com/model/922401-ender-3-ng-v12-corexy-conversion that allows me to use different size of fans and also some keystone connectors. 14.05.25 Update: Added…
A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…
VZBot electronics mounts on din rail: Orange Pi 3LTS BTT Octopus PRO with 5160 Only BTT Octopus PRO PSU Meanwell RD35 DINrail clip You'll need screws and nuts M3
I love the design of the mid panel with hex pattern by Zen3D and wanted to have it for my V0, too. Then I found the Modesty Mesh for Voron Zero by MapleLeafMakers and thougth that these side panels for the electronics compartment would be…
This is remix of another great remix created by Dan Cernogorsky. List of changes: Added original RR electronics box cable clamp for wires management Re-oriented control boards to fix collision of SKR2 driver heatsink with Raspberry Pi…
Remix of KVEL's WERA Screwdriver Holder with improved Bott Perfo Brackets. Print instructions Additional parts required: - 6 x M3 Brass Heat Set Inserts (for Bott Brackets) 1 x M3x8 Socket Cap Hex Machine Screw 2 x M3x10 Socket Cap Hex…
Miniature Circuit Board Keychain Enhance your keychain with this intricately designed electronics circuit board model. Featuring detailed wires and a chip, this keychain adds a touch of tech flair to your everyday carry. Prints in…
I've remixed the Inverted Electronics & Voron Trident Lowered Z motor mounts so I can install Nema17 motor with coupler and 350 mm leadscrew as I didn't found any with an integrated leadscrew at this length for my self-sourced 300 cube…
This Air Vent is similar to the Bud NBX-10911 but designed to 3d Printable. This vent will fit into an 11/16 drilled hole. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament:…
Remix of the Caribou enclosure: https://github.com/Caribou3d/CaribouDuet
The Electronics Tray provides a convenient way to mount electronics and equipment in a 4″ Series Watertight Enclosure . The front panel has mounting holes for the Camera Tilt System for easy use with any camera and dome. The Electronics…
Overview No CAD skills required! Everything is handled via easy-to-use spreadsheets. Smart modularity: up to 8 user defined modules, where each module can have fully parametric: up to 4 pillars for PCB mounting one rectangular hole on the…
This is a modification to the Prusa Mini electronics/controlboard enclosure top cover to add a 4010 cooling fan. This modification will provide active air cooling to help keep everything cool especially over long prints (18h+) in hot…
Eebel's hinged electronics board is awesome, but I wanted to mount more common electronics than what he used in the current version. The board holds the following components - Microsoft Xbox Receiver, Sabertooth 2x32 Motor Driver, SyRen…
This is a Remix, merge and refactor of SquirrelBrain's and Orson80's awesome case designs for the RatRig V-Minion. I needed more space for my SKR3-EZ, which the Orson80s design fit, but I also like SquirrelBrain's RPI modular design, so I…
PrintABlok:ElectroBlok take PrintABloks and add common hobby electronics components like Arduino, servos, buttons, leds, and others, for rapid electronics prototyping allowing you to make PrintABlok creations that can play with you.…
Just a replacement electronics cover designed to accommodate a generic 80x10mm 24V fan on the inside. You just have to glue the two parts together. I printed it in PLA+ and have no problems so far. If you appreciate what I've designed so…
These are electronics mounts that fit in my Duender Base Case . Currently there's a mount for a Raspberry Pi, an ender 3 control board (or anything that with the same form factor) and a mount for the ender 3 power supply. If you have cut…
You may need longer cables to move the enclosure to the back. All mine were fine except the screen.
A small tray for sorting small electronics. Different heights for the small compartments. 150x100mm Makerworld: https://makerworld.com/en/models/648573 Thingiverse: https://www.thingiverse.com/thing:6770376
This Air Vent is similar to the Bud IPV-1116 but designed to 3d Printable. This vent will fit into an 2.5" drilled hole. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 10 Filament:…
INTRODUCTION Due to popular demand we have designed the frame for a Voron Trident 300mm build. This amazing EMS platform for the Trident brings quality craftsmanship and ingenuity to trident wiring alternatives. The request and fellow…
A fully parametric box for my (or your!) next electronics project. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Filament: Clas Ohlson PLA yellow How I Designed…
Complete with a sharp spudger edge with hook and point, for all your electrical repair needs infill - 60% resolution - 0.12 rafts - yes temperature - 220c filament brand - 3D-Fuel
New updated model here! ---- This is a remix from user @Pedrolamas What I noticed right away was that the back screws used to secure the top are in an akward position. They either didn't line up, or were barely reachable. I ended up just…
THIS VERSION USES HEATSERTS. The Zaribo ZLC kit comes with a BTT Octopus Pro, but I wanted to run Klipper and have things as tidy as possible. A BTT Manta M8P does the job but is slightly larger and has different mounting holes. I remixed…
This is a remix of Vince Formosa 's Ender 3-MAX electronics box: https://www.thingiverse.com/thing:4916320 Description The original box is intended to clean up the look of your 3d printer, by putting your electronics in a box. The…
These are side panels for the Ratrige 400mm V-core 3.1 with enclosure model 2.0. This one I made because I could not find any for the plug that I have. It's for an AC plug that measures 2.25in tall by 1.25in wide. How to edit this. There…
Pole mount & electronics enclosure for a 150mm x 130mm solar panel. This accommodates a common 1 inch (1.2" (30mm) O.D. measured) EMT electrical conduit pipe. Zip tie accommodations are provided around the pole mount in case the fit is…
This is a remix of the Prusa Mini Z-Top | Electronics Box Lid by freewheeler , the Raspberry Pi Zero mount lid by Deeps , and the Pi Zero hex lid by crokobacon with the following changes: Boxier design that, in my opinion, visually works…
![Modular and stackable Electronics Organizer Box System inspired by Alexandre Chappel [last updated: 2022-11-18]](https://media.printables.com/media/prints/316542/images/2740154_e62e2c61-c96b-4608-9336-71ca6232e7ee/set_render.png)
