Search results: cx10

Sort order

127 models

P
Printablesdaver18qc

1/10 Scale Bumper Jack SCX10

* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…

Downloads
1,320
Likes
315
Rating
4.89
P
Printablespolymech3D

Armadillo Off-Road Truck 1/10 body for SCX10 III

Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…

Downloads
849
Likes
246
Rating
5
P
Printablesxboxsniper22

SCX10 Pro Frame

It's very close to the original and can be used as a template to create other parts.

Downloads
753
Likes
63
Rating
0
P
PrintablesRobert Posey

Scx10 chassis

Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…

Downloads
688
Likes
62
Rating
0
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Downloads
586
Likes
55
Rating
0
P
Printablesahead_RC

SCX10 iii Gladiator Flatbed

Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…

Downloads
470
Likes
96
Rating
5
P
PrintablesRevellio

Custom Crawler Chassis based on SCX10 Carbon Rails

General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…

Downloads
457
Likes
74
Rating
0
P
PrintablesRevellio

AXIAL SCX10 I & II - Chassis Parts / Update 22.10.2026 - New Body Mounts

Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…

Downloads
411
Likes
53
Rating
0
P
PrintablesRMTCTRL

Cantilever Suspension for Axial SCX10

I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…

Downloads
353
Likes
97
Rating
0
P
PrintablesZanthrax

Hinged body mount for Axial SCX10III Early Bronco

Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…

Downloads
351
Likes
30
Rating
5
P
PrintablesBrainanator

SCX10 Skid Plate. High Clearance, Flat Bottom

Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…

Downloads
312
Likes
18
Rating
0
P
PrintablesDasumocat

Axial SCX10ii 1/10 scale Jeep front bumper

I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…

Downloads
287
Likes
42
Rating
0
P
PrintablesRobert Posey

SCX10 Hotrod body

This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…

Downloads
279
Likes
39
Rating
0
P
PrintablesJimjo

SCX10 III - High Clearance Bumper

High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…

Downloads
260
Likes
24
Rating
0
P
PrintablesCosmos Darkstar

SCX10 II comp rock sliders

These sliders were perfect but they were too wide for the comp truck body so I made them smaller.

Downloads
233
Likes
14
Rating
0
P
Printablestaeraeyttaejae

Axial SCX10II front chassis front bumper mount

Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…

Downloads
215
Likes
15
Rating
0

SCX10.2 to RC4WD Xtra Cab body mounts

Hey everyone, Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs…

Downloads
211
Likes
22
Rating
0
P
PrintablesTeamK

Axial Capra and SCX10.3 - Mini-T Spring Perches

If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…

Downloads
205
Likes
20
Rating
0
P

Axial SCX10 III Portal AR45P Axelstand Rc Crawler

Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…

Downloads
198
Likes
28
Rating
5
P
Printablesbricoletout

Bumper AXIAL SCX10 II (2) (AX31392 and AX31393 substitute)

Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…

Downloads
183
Likes
24
Rating
5
P
PrintablesOzzy

80mm Wide Drop Hitch Mount For RC Crawlers / Scx10 / custom

-uses m3 screws -can be flipped upside down so the text is not visible -The pintle hitch mount is for this pintle hitch!! https://www.printables.com/model/279936-18-scale-110-scale-pintle-and-pintle-ball-combo-tr/files

Downloads
171
Likes
38
Rating
0
P
Printablesjt001sk

FMS FCX10 bumpers with integrated mount

FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…

Downloads
166
Likes
20
Rating
5
P
PrintablesBen

Axial SCX10 iii Basecamp Rock Rails

These are rock sliders that can be installed on the Axial SCX10 iii Basecamp. I printed these from Prusament PLA as a prototype and have yet to break them. If they break, I plan to use some Prusament PC blend CF. You will need two M3x10…

Downloads
166
Likes
24
Rating
0

SCX10.2 Flat Skid for Vanquish VFD(original) transmission

Modeled this SCX10.2 flat skid to install a Vanquish VFD transmission basically as far forward as possible. Used this along with the Xtra Cab trays I also uploaded. Certain bodies may require some modifications to the body and/or the…

Downloads
153
Likes
10
Rating
0
P

Roof Rack For AXIAL SCX10 III JEEP JLU WRANGLER Rc Crawler

Scale accessory for Axial SCX10 III Jeep JLU Wrangler. Roof rack that can be mounted in the front, middle, or rear of the roof. There are two mounting options: either using double-sided adhesive tape or by screwing it directly through the…

Downloads
151
Likes
23
Rating
0
P
PrintablesBen

SCX10 III Basecamp Front Bumper -- Pinched

This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…

Downloads
150
Likes
17
Rating
5
P
PrintablesDr.Jeckyl

SCX10.2 3 gear transmission wedge for GSpeed skid and rails

A wedge to raise the motor up away from the rails when using a HobbyWing Fusion with GSpeed skid plate and chassis rails. The opo named files tilt the transmission side to side while the other files tilt the transmission front to back.…

Downloads
148
Likes
11
Rating
0
P
PrintablesC4 Designs

SCX10 SawHorse Stand

PLA for indoor use. 2 or 3 walls depending on nozzle diameter, 20% to 24% your favorite infill. No Supports Required (4ea Required) Saw Horse Stand Vertical Piece (2ea Required) Saw Horse Stand Horizontal Piece (8ea Required) 3mm x 10mm…

Downloads
147
Likes
24
Rating
0
P
PrintablesDuaneL

Refined Jeep Wrangler front bumper with Bull Bar for SCX10

I tweaked the original so it would line up better on the SCX10 II, then replaced the stinger with a bull bar and tweaked the bumper to fit the frame more closely and allow better approach angle. TinkerCAD for front bumper:…

Downloads
138
Likes
22
Rating
0
P
Printableshrafengrim

SCX10-scx24 Pro Frame conversion

downsized frame from scx10 to scx24 . skid plate included I used and battery/ESC/receiver tray I put together.

Downloads
137
Likes
32
Rating
0
P
PrintablesAlesna33
Downloads
127
Likes
17
Rating
5
P
Printables3DFreeman

Atari CX10 CX40 Joystick - STL VERSION! - Using Arcade Parts

STL VERSION RELEASED! - It is time (after 2+ years) for this model to be freed from my Patreon I grouped the three handle versions together because I couldn't stop them from laying on their side in the slicing software and it's a pain to…

Downloads
125
Likes
27
Rating
0
P
PrintablesRobert Posey

SCX10 Kit transmission

Made this for modeling up RC Crawlers, Not sure how accurate the motor mount is I think the motor sits several mm too low, but it all seems close enough to me. Found a better picture for the motor mount, I expect everything is accurate to…

Downloads
124
Likes
17
Rating
0
P
Printablesmichbart

Adjustable Battery Tray for Axial SCX10 III Coyote

Looking for a clean, adjustable, and fully compatible battery tray solution for your Axial SCX10 III Coyote ? This tray is a drop-in alternative to the original Axial AXI-2999 battery tray , offering flexibility without compromises. Key…

Downloads
114
Likes
14
Rating
5
P

Roof Rack For AXIAL SCX10 III Jeep JLU Wrangler v2 Rc Crawler

This is a new roof rack that uses the same mounts as my previous model. The idea is that you can replace the roof rack without having to modify the mounts if you have drilled and screwed them into the car body. Link to previous model:…

Downloads
109
Likes
17
Rating
0
P
PrintablesKXNT

Bead lock ring for Axial SCX10

Fits Axial 1.9 bead lock wheels. Category: R/C Vehicles

Downloads
106
Likes
14
Rating
5
P
PrintablesSebastian p

Rockslider SCX10 Jeep Cherokee

Habe mir zwei Rock Slider erstellt. Abgestimmt auf den Jeep Cherokee von Axial (SCX10). Vorteil: man kann die Karosserie in den Rock Slider klemmen und die Seitenschweller in der Breite einstellen. Karo klappert nicht so, einstellbare…

Downloads
103
Likes
15
Rating
0
P
PrintablesMercys Artworks

Self designed body for Axial SCX10 313mm

I play a little with the thinkercat and designed a body for an Axial SCX10

Downloads
99
Likes
12
Rating
0
P
PrintablesCaiben

SCX10 Front Bumper

A simple front bumper for a SCX10, have not tried it on a SCX10-2 as of now. You can print it without supports but it may not be optimal for the end quality. There are also holes for 2x 5mm leds.

Downloads
99
Likes
8
Rating
5
P
PrintablesKXNT

Beadlock Wheel 1.9 for SCX10 XD Style

Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for R/C car 12mm hex

Downloads
98
Likes
23
Rating
0

Axial SCX10 Front battery tray

Secure mount for a battery in the front of the SCX10. Uses 4x M3 screws. Sized for a 5000mAh box LiPo. I can alter the size for different batteries, just shoot me a message. The Basecamp body still fits in this configuration but I can't…

Downloads
96
Likes
22
Rating
0
P
PrintablesAndoo

Mojave cab on SCX10 ii

This is a full back of cab for a RC4WD Mojave body and Skids that will work on an SCX10 ii or similar to mound the cab using screws there are optional brackets to mount the back using screws or you can just glue in place.

Downloads
92
Likes
12
Rating
0
P
PrintablesMaxxDesigns

Scx10 ii Servo and Servo Winch Mount for Forward Trans Flip

I designed this piece to work with my trans and motor flip mounts for a 10.2 kit chassis. Steering servo in stock position and a servo winch flat and as low as can fit up front on the chassis. You may have to space your servo up depending…

Downloads
91
Likes
13
Rating
0
P
PrintablesSherkmake

AXIAL SCX10 Ball Joint

AXIAL SCX10 Ball Joint nozzle 0.25 or smaller

Downloads
88
Likes
21
Rating
5
P
PrintablesZanthrax

SCX10II mount for RC4WD 4Runner body

Chassis kit: https://www.axialadventure.com/product/1-10-scx10-ii-4wd-raw-builders-kit-v2/AXI90104V2.html Body kit: https://store.rc4wd.com/RC4WD-1985-Toyota-4Runner-Hard-Body-Complete-Set_p_7220.html The rear hinge comes in 2 parts. Use…

Downloads
87
Likes
21
Rating
0
P
PrintablesMaxxDesigns

Scx10 Transmission Motor Flip Mount

Motor flip mount for the original scx10 transmission, A little bit thicker in design then my 10.2 style flip mount but otherwise a similar design. Should also fit 10-14 pinion, maybe a bit more and a bit less. I also mirrored my trans…

Downloads
84
Likes
11
Rating
0
P
PrintablesKXNT

1:10 Scale RC Toolbox 2 Craftyman Axial SCX10

Simple 1:10 Toolbox for scale RCs. Category: R/C Vehicles

Downloads
84
Likes
18
Rating
0
P
PrintablesMaxxDesigns

Scx10 ii Transmission and Motor Flip Mounts

Flip your 10 ii kit transmission and motor forwards for the best cg! The motor flip mount fits a good range of pinions, 10-14 at least, maybe a bit lower and higher. The motor mount is pretty solid as long as you print it pretty thick, 5+…

Downloads
81
Likes
19
Rating
0
P
PrintablesTurboTaco2JZ

Long travel shock mounts for Axial SCX10 2

Remix of SCX10.2 shock front hoops by justicedspencer This is the V1.0 of shock hoops for the SCX10 2 that allows for near 1:1 motion ratio and scale angle shocks (straight up and down, not angled) and allows for long shock travel while…

Downloads
81
Likes
13
Rating
0
P
PrintablesRevellio

Custom Trail Finder 2 Chassis based on SCX10 Carbon Rails / Wheelbase 11,2" (284mm)

general description The chassis geometry is 100% identical to the original RC4WD Trailfinder 2 (11.2"). All mounting points, bumper mounts, body mounts, shock mounts, and leaf spring hangers are 100% RC4WD compatible. The Gearbox. Only…

Downloads
73
Likes
13
Rating
0
P
PrintablesWildManMakes

3S Battery tray for SCX10/ SCX10ii/ SCX10iii

Battery tray to take the big hard case 5200mah 3S lipo batteries, mounts to the original tray mounting points on the right hand side, made it as low as possible without cutting original splash guard, 3mm walls, print with supports.

Downloads
73
Likes
8
Rating
0
P
PrintablesBradW

China JK Magnet Body Mount GCM Skeleton SCX10 Axial

Add magnets to your GCM Racing J2 Skeleton Chassis with China JK body for quick and easy removal. Holds great. I also added an area for the on/off switch to go. Can be trimmed if not needed. You will need to drill 4 holes in your chassis…

Downloads
71
Likes
9
Rating
0
P
PrintablesKXNT

Beadlock Wheel 1.9 for SCX10 All XD series style

Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for 12mm hex R/C vehicle.

Downloads
71
Likes
14
Rating
5

SCX10 shock mount extension

Shock extensions based on aluminum aftermarket ones. 3 files are included - the specific setup I have for front and rear, and a universal one for more adjustment options. You will need 2x M3x10 screws for each extension, so 8 total if…

Downloads
68
Likes
15
Rating
0
P
PrintablesKXNT

Axial SCX10 bead lock Spyder lock 1.9

Fits Axial's 1.9 bead lock wheel. PoisonSpyderRings_V2_1_fixed: recessed holes for screw heads, larger inner circle. PoisonSpyderRings_2: standard bead lock, smaller inner circle. Category: R/C Vehicles

Downloads
67
Likes
12
Rating
0

scx10 front lower links 120mm

this link works great with the ball bearing that you can find on printables if you type in scx10 all my links that are 1/10th uses them and in the hole with minimal filing. Printed in PLA then PETG 100% Enjoy! MRC

Downloads
64
Likes
11
Rating
5
P
PrintablesCrazytiti

SCX10 ting tong 14, 16, 20° C-HUB + 3 links mod

2025 06 25 : News : i've added a full 3 links set : the C-hub and the panhard bar support, see pictures. Beware : to have no bump steer the panhard and servo link need to be the same length and to be parallel. Use the v3 and the servo…

Downloads
60
Likes
11
Rating
0
P
PrintablesIonNight

Axial SCX10 center mount for CNC Aluminium 2:1 Transfer Case

Imported from my designs on Thingiverse. Original upload was 18.07.2019 (dd.mm.yyyy) I do most mechanical design. Can do easy basic patching. Mount/bracket for your "CNC Black Aluminium Transfer Case" with mostly 2:1 gear ratio. It has…

Downloads
55
Likes
11
Rating
0

scx10 Rear upper link 125mm Bent link

Easy to print may require a small amount of filing to fit the ball joint in. Have fun! MRC.

Downloads
54
Likes
8
Rating
0
P
PrintablesKXNT

1.9 bead lock wheel for Axial SCX10 or Wraith. 12mm Hex

WORK IN PROGRESS. Just want to share. 1.9 Bead Lock Wheel Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be…

Downloads
53
Likes
9
Rating
0
P
PrintablesSir Ged

Bumper Brackets for Axial SCX10 Rock Crawler

These are bumper brackets for the Axial SCX10. Made these so that I could extend both the front and back to fit a new body. Also added stabilizers to use towards the battery holder as I had to move mine to the front. The battery holders…

Downloads
52
Likes
8
Rating
0
P
PrintablesDasumocat

Axial SCX10 RC DC front bumper winch plate mount

This adapter will fit RC4WD 1/10 scale Warn winch to the RC DC front bumper for an Axial SCX10. I will download the RC DC front bumper file and give credit in a separate model profile.

Downloads
52
Likes
13
Rating
0
P
PrintablesKXNT

Beadlock Wheel 1.9 for SCX10 GMC All Terrain Style

1.9 Beadlock wheel 12mm hex. Uses Vanquish Products SLW style hub to mouth to hex. Modeled to match my Full size truck wheels. The file ending with BIS has a support structure already built up to support the print Category: R/C Vehicles

Downloads
51
Likes
11
Rating
0
P
PrintablesRevellio

RC Crawler Link Board / TRX4 / SCX10II / Building Tool for Crawler Links

general I often build crawlers with third-party links, custom links, and other rodends, and I always have problems getting the links to the exact right length. That's exactly what these tools are for. Currently only available for the TRX4…

Downloads
50
Likes
5
Rating
0
P
PrintablesRon Benecke

Beovox CX50 CX100 foam

Refoamhelp PLA 0.3

Downloads
49
Likes
3
Rating
0
P
PrintablesKXNT

Beadlock Wheel 1.9 8 hole for SCX10

8 hole beadlock wheel for 12mm hex RC vehicle. Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be found here:…

Downloads
49
Likes
8
Rating
5
P
PrintablesDrexplotionpd

Axial SCX10.2 Tamiya body slider

I wanted to be able to mount a Tamiya f350 body on my axial based 6x6. So I came up with a factory ish option to be able to mount it. Bolts on just the same as axial sliders and has side screws for the Tamiya holes. You can also use long…

Downloads
48
Likes
5
Rating
0
P
PrintablesMacLemon

Axial SCX10 Shock Seals

Axial SCX10 Shock Seals The SCX10 factory shocks are well known for their terrible leaking. I've tried a very simple approach at fixing this issue by replacing the spacers beween the O-rings at the shock body bottom. After this simple…

Downloads
47
Likes
9
Rating
0
P
PrintablesTux Stang

FMS FCX10 LC80 exhaust

Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.

Downloads
45
Likes
5
Rating
0
P
PrintablesRobert Posey

Scx10 more universal body and bumper mounts

an upgrade to Ascender body mounts for SCX10 II https://www.thingiverse.com/thing:3210534 These should be more universal to different lengths of bodies. part A screws to part B, separated for strength. Bumpers can be found here…

Downloads
39
Likes
8
Rating
0
P
PrintablesSewad

SCX10 front center battery tray

battery tray mounted in the front and center I printed mine in ABS, but really anything would work. I printed it with the small closed end on the bed seems to work well. You will need longer m3 bolts

Downloads
38
Likes
2
Rating
0
P
Printablescarlosmakes1

SCX10 FRONT MOTOR AND TRANSFER CASE

Front motor mount for injora gearbox , others should fit. Needs M3 square nuts and m3 screws. Transfer case, use parts from the SCX10 gearbox ( bearings and gears ) . M3 x 30 screws and nylocks. Grease if you want. It slows the rig down…

Downloads
38
Likes
7
Rating
0
P
PrintablesTux Stang

FCX10 LC80 rear bumper mount

Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)

Downloads
37
Likes
4
Rating
5
P
PrintablesRobert Posey

SCX10 Hotrod Grill and Servo Mount

This is a front bumper / grill for an scx10 hot rod build. it includes a servo mount under the grill. I haven't printed it yet to know how well it fits, but it should be good. There is a pretty good remix of this over here…

Downloads
37
Likes
13
Rating
0
P
PrintablesGreenRanger090

Axial SCX10.3 CJ7 Windshield Frame

A roll cage style bar that sits inside of the lexan of the windshield on the Axial Scx10.3 CJ7. descrete and provides ample protection to keep your widnshield form getting caught on rocks and ripped off. made because my friend and i have…

Downloads
35
Likes
4
Rating
0
P
PrintablesTux Stang

FMS FCX10 LC80 mudflaps

Print in TPU. Glue to the rear lip of the rear inner fenders.

Downloads
34
Likes
4
Rating
0
P
PrintablesItsJustJoe

SCX10 II Transmission Skid Plate - 3 Versions

SCX10 II style transmission skid plate available in three different versions. One has built in mounting tabs for the rear upper links which can conflict with some longer motors. The second has no tabs and will require the use of a nut to…

Downloads
33
Likes
3
Rating
3
P
PrintablesSunfm

Bruder 5th wheel hitch adapter for Axial SCX10

My kids have a bunch of the Bruder brand toys including the big lowbed trailer. I thought it would be fun to tow it with my Axial SCX10 RC truck. I wanted something simple that bolted on easily. I found someone had already designed the…

Downloads
32
Likes
8
Rating
0
P
PrintablesBradW

Axial SCX10III Early Bronco Seat Back

I made these seat backs for when you flip the seat to fit a 6" driver. Flipping the seat makes the driver fit better but leaves the back open.

Downloads
32
Likes
3
Rating
0
P
Printablesdachnlk

Bumper mount for Remo Hobby Trophy/Axial scx10

Эту модель я сделал, чтобы переместить бампер ближе к кузову, так модель выглядит лучше, а также улучшает внедорожные качества. Для печати я использовал abs gf. Но вы также можете использовать abs/petg. Для большей прочности используйте…

Downloads
31
Likes
3
Rating
0
P
PrintablesTurboTaco2JZ

Body Mount Add-on for Long travel shock mounts for Axial SCX10 2

This is an add-on for body post/mounts if you printed my remixed long travel shock mounts/hoops ( https://www.printables.com/model/730892-long-travel-shock-mounts-for-axial-scx10-2 ) These just bolt onto the inside of the shock mount.…

Downloads
28
Likes
3
Rating
0

Fuel Cell For SCX10.2 Xtra Cab

Quick little fuel cell I designed to cover the holes you have to cut for the rear shock towers on an Xtra Cab body mounted on an SCX10.2 (I have a file for body mounts). A few rare earth magnets in the bottom of the cell and a few on the…

Downloads
28
Likes
4
Rating
0
P
PrintablesJimjo

SCX10iii Slick Slider

Cover up the ribs on the existing rock sliders with a slick plastic surface. will reduce hang-ups and allow the vehicle to actually slide over sharp rocks. Compatible with all versions of the SCX10iii. use 4x M3 countersink head screws…

Downloads
27
Likes
4
Rating
0
P
PrintablesMindless

Axial SCX10.1 4-link truss with servo mount

This is a 4-link truss with servo mount for og Axial SCX10 axles. I needed it to build pass-thru axles for my 8x8 custom truck.

Downloads
27
Likes
5
Rating
0
P
PrintablesVincent Lesko

AXIAL SCX10 II DEADBOLT GRILLE

Simple model to add a little dimension to the front of the Axial SCX10 ii Deadbolt. It is a work in progress, currently no specific mounting system so that will be up to you for now. Also needs some fit and finish before I will be happy…

Downloads
26
Likes
7
Rating
0

Soporte Injora 35kg Winch Servo FCX10 LC80 Pro V2

Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.

Downloads
22
Likes
3
Rating
0

SCX10 Schwenklager

Hierbei handelt es sich um ein ergonomisches Schwenklager, welches über die vier Gewinde ein Achsgewicht aufnehmen kann.

Downloads
21
Likes
7
Rating
0
P
PrintablesMindless

Axial SCX10 (SCX10.1) four-link truss

Trying to mimic original 4-link truss. Made one out of PETG- didn't last long. One out of PA6-GF 25 - currently in model, doing fine. One in TPU98A - in reserve.

Downloads
20
Likes
12
Rating
0
P
PrintablesNaftausa

Antenna support for Axial SCX10 Jeep Cj7

simply collar to hold a zip tie-antenna. print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert…

Downloads
20
Likes
3
Rating
0
P
Printablesvidision

1:10 scale D-ring Shackle for SCX10

The shackle holes are symmetrical 2.4mm and not threaded. I printed in PLA with 0.20mm layers and the screws threaded securely with no other preparation (I oriented them opposing directions for each side).

Downloads
20
Likes
6
Rating
5
P
PrintablesHeliguy71

SCX10 III ESC Mount MAMBA X

ESC mount for the SCX10 III to mount the larger MAMBA X ESC above the micro servo. Requires 2 x M3 x 6mm Screws and uses stock holes for mounting. Print in the orientation downloaded. 5 walls 4 Top & Bottom Layers Print using PETG Print…

Downloads
20
Likes
2
Rating
0

Smaller Slipper Plate for SCX10 Crawler Belt Drive Transmission

Smaller Slipper Plate for SCX10 Crawler Belt Drive Transmission The stock slipper plate is too large to fit in the aliexpress belt drive conversion. So here's a smaller slipper plate. Get the belt drive conversion here:…

Downloads
20
Likes
3
Rating
0
P
PrintablesLeonard Kessler

Temporary wheel for trx4, scx10 and other rc cars

Temporary wheel for RC models with an outer diameter of 107 mm, designed for safe storage of the vehicle. The rim is made of PLA/PETG, and the tire is made of TPU. Features a standard 12 mm hex mount, ensuring compatibility with most RC…

Downloads
19
Likes
8
Rating
0

SCX10 Axle Part

Aufhängung für SCX10 Crawler für den Achsschenkel.

Downloads
19
Likes
6
Rating
0
P
PrintablesRobert Posey

Ascender body mounts for SCX10 II

Modified this well designed bumper platform to mount an ascender truck body to my SCX10 II. Bumpers can be found here https://www.thingiverse.com/Goodsons_Hobbies/designs The rear is a strong hinge joint and the front is a simple pinch…

Downloads
19
Likes
4
Rating
0
P
PrintablesReni

Beovox CX100 refoam press

When refoaming a BeoVox CX100, you need to apply pressure to the inner and outer rim of the foam at the same time. This ring will help with applying the pressure. Print the ring, best is to print 2 per speaker so you won't have to wait…

Downloads
18
Likes
3
Rating
0
P
PrintablesTux Stang

SCX10 Pro Underdrive 25T horn

Servo horn to use Injora 2065 servo on a SCX10 Pro. Might also be compatible for the same servo for SCX10 III DIG.

Downloads
17
Likes
3
Rating
0
P
PrintablesTux Stang

YK4106 Pro/Absima Wolf/FMS FCX10 thumb steer/FlySky MG11

Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…

Downloads
16
Likes
4
Rating
0
P
PrintablesCarson Krause

Dually Wheel(Trx4 and SCX10)

I've always had a problem with the cheaply designed dually adapters for 1/10 RC cars, so I've set out to make a better one. I have designed one of these before, it had some issues, which I fixed in this version. This is designed for 1.9…

Downloads
16
Likes
5
Rating
0