1,285 models
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Drill debris & dust recover, the cleaning solution Updated! Supports: No Filament: PLA Time: 46m
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Check out the additional models: Settings Value Infill 10% Perimeters 2 Layer Height…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for PETGSource material: PET
I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Right and left versions of empty boxes and left side there is also toolbox version. Inside the toolbox there is slot of original prusa mk4 tools.
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for PETGSource material: PET
Because i bought a set of some different blades but just one handle, i made my own handles. Print Chip The 2 halfs are mirrored. Print both without support. Additional Parts A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
This is a customizable base that works with any of Flowalistik's Trophy set cups. Base and plaques are easy to scale. I found printing everything at 300% made for an ideal trophy size. Once you print the base and plaque, head over to…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Reloading tray for .338 Laupa Magnum. Fits also for smaller caliber.
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
a Debowler Lid with GL45 thread for Arizer Stems for your avp You need additionally one flask with GL45 thread, just search for “GL45” in the www choose your debowler spatula, wether you have the round sieves or the flat ones use the .3mf…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
An editable credit/debit card design
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Note: Before printing this design, have a look at the remix from @heathen614_26810 here: https://www.printables.com/model/653156-deburr-box I think their design is superior to mine, unless you have a preference for a simple, open holder…
Print approx. €5.35–€6.54 excl. taxPreliminary estimate for one variant
NOTE!! No MMU or multitool printer is required to print this game! Are you a l33t h4x0r? Do you have what it takes to figure out the cypher patterns to access the servers and outwit your peers? Will you use your powers for good…? Whatever…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Hallo, da man gerade kleinere Gewinde in den Modellen meistens ein wenig nachschneiden muss, habe ich mir dazu diesen Griff erstellt, der Werkzeughalter aus Metall war mir dafür zu unhandlich. Gedruckt aus PLA mit 3 Wänden Hello, since…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Sidebox right for Enclosure with MK4 inside (and for additional spool holder) Why a new box??? First I print this one: Prusa Enclosure SideBox von XBurgy | Kostenloses STL-Modell herunterladen | Printables.com I thought I can use it, but…
Print approx. €8.69–€10.62 excl. taxPreliminary estimate for one variant
This is a modification of the Insert - Bottom (No Holders) , made to fit CNCKitchen deburrer . This is just a customized insert to the following model Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style by @Lndnny. Print settings…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
A bracelet with "Pumping Station:One" debossed on it. Created with FreeCAD, using the Curves workbench. The FreeCAD files contain the dimensional values in a spreadsheet, including alternate sizes: extra-large and small.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Toto je ľavá bočnica pre AB6H modulárny systém, ktorý som navrhol. Pozostáva z bočnice a predného panelu. Bočnicu som si navrhol tak aby bola rovnakej dĺžky ako samotná bunka samozrejme pripájam niekoľ Osobne tlačím jednotlivé bunky dĺžky…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
C'est un outil pour racler et déboucher un tuyau d'évacuation d'eau de diamètre 40mm. La tige fait 24 centimètres de long avec un bout en demi cercle, permettant d'accéder dans le tuyau et de ramener les saletés et de ne pas les pousser.
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Ein Buchblock aus losen Blättern im Format DIN A6 kann zwischen diesen Brettchen zum Verleimen eingespannt und gepresst werden. Durch die Aussparung zwischen den Standklötzchen kann der Buchrücken vor dem Verleimen eingeschnitten und…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Fits this deburring tool kit: https://a.co/d/cgOKK9N Printed with PETG, 2 perimeters, support material on build plate, 15% infill. Includes modified Fusion 360 file from Shawn Stutzman that fits Vastools Swivel Head Deburring Tool 6 1/2"…
A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Please note, the hinges are elements from the original design & are not my work, yeah they’re a bit tight & no they’re not that great, but they do work. If I…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
This is a remix from Onelostcause ; original model found here . The original model is great for holding any standard/generic straight handled deburring tool. I wanted to incorporate blade storage while still retaining the ability to stack…
Building on top of the great Gridfinity block template by Filip Kolínský , I designed a tray for the AFA deburring tool inspired by similar trays from Onelostcause and Yoni . Uploading the Fusion 360 model file in case you want to make…
A simple holder for 3.2mm deburring blades. The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together. Update dec 25: Added new model files for…
Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…
Hold your AFA deburring tool on your honeycomb storage wall…and do it in style! The space for spare cutters gives it a very Game of Thrones feel to it. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part…
Deburring Tool Case for the aliexpress deburring tool. fits 10 blades and the tool. print in place model using 14 magnets (6X2) for securing the blades and closing the tool box. stop the print at height 2.8mm (10 magnets), 17mm (4…
Printing Both parts are printable without supports. Assembly list of non-printed parts deburring steel blades
Bigger sidebox to fit more stuff. Please read print instructions. Print instructions There are two versions of left box, one blocks SD-slot (if you use other method of transferring files) and one with the SD-slot reachable. After feedback…
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. I have…
A simple tool holder for hexagonal deburring knifes with 9 additional blades. This has been modified from the based on the version designed by Jem_3Dprints , with the following modifications: The main tool holder has been adapted for the…
I notice that all the Debris that falls of the nozzle lands behind the XL and also on the Power supply and Buddy Box. Ive tried to find a good way to catch all the Debris of the nozzle, that come off when the nozzle parks. Ive tried to…
My Tool was only some mm longer. Thanks to the supported f2d files i've modified them so you can set some parameters: (len) Length of the box (ToolEndRadius) The radius of the tool end (HolderDiameter) Diameter of the tool holder…
Deburring tool holder with storage for 10 extra blades.
A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…
Just a quick remix to fit my libraton. * Lengthen the handle hole * Made the tool holder a little bit thicker
I wanted to made print in magnets so you dont have to click the tools in. I used Magnets ⌀5x1mm. I used this Magnets from amazon. I made a second version on request for ⌀6x3mm magnets. The design is made for this deburring tool What you…
I have added two stops to the original deburrer holder so that the tool no longer slips off the fork so easily.
A Deburring tool holder for use on an Ikea Skadis board. Can hold any deburring tool with a diameter of 20mm or less, such as the AFA Tooling Deburring tool. printing with supports is required, and printing with a brim is recommended.…
Use with Ikea Skadis system and T-Clips to mount (see remix section). Be sure to print a T-Clip to go along with this model. After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate…
A deburring tool tray that holds the tool and 15 extra tips. This is a remix of darious' Gridfinity Deburring Tool Holder , modified to hold 15 extra tips.
This is tray to hold my deburring tool in my draw using Gridfinity. I bought this from Amazon, it might work for other models. This was created in onshape from a set of templates I found. This video was very helpful in figuring it all…
Simple 1x1 Gridfinity holder for a deburring tool off of amazon The tool hole is 20mm in diameter The scraper holes are 3.45mm in diameter and fit the scraper heads snugly. Also included is the Fusion360 .f3d file.
Even bigger MK3s side boxes with cuts for better access to the card and knob. Print instructions I've printed my pair with PETG orange Prusament.
Modification of Deburring Tool Case 154mm (Libraton) - Rugged Box Style to fit NB1100 deburring tool. In this remix you can find part to fit NB1100 deburring tool to fit to original box made by user @Shadow_1242354 . You just need to…
!!WARNING!! I am not a structural engineer! I am making this sh!t up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
Thats my deburrer holder for my honeycomb wall. Just screw a M4 insert behind it. Done :)
Update: Created a version 2 based on feedback. I've left the V1 version in the files if anyone is interested and the instructions still apply for that one, it is only slightly different for V2. Changes for V2: 1.) Made logo larger to aid…
This is a quick model I threw together after coming across Samonsite's HSW Deburring Tool Holder model for RostaP's HSW . I am a big fan of the radial symmetry and decreased footprint of his model relative to other options, but my deburr…
I created these early on for two reasons; cleaning out filament debris from the small cavity surrounding the leadscrew rotation area at the bottom of the printer was tedious. As well if any instance of filament strands or dirt getting…
Description Insert for tool made longer (154mm) to fit Libraton tool. This is my first remix so plese let me know if I've done something wrong via coments Assembly You will need six 20 mm long M3 screws to assemble it. The magnet used for…
Base ramp insert for easy filament debris removal, one piece design. Can be printed in one piece on the bed of X1C, P1P and P1S. Designed for optimal fit and easy install. Best in PETG for temperature resistance, added print profiles to…
This is a remix of a remix of the excellent deburring tool case originally created by morleykert . This case fits a 150mm length tool from tip of blade to end of handle. Handle width is 15mm across (widest) edge of the hex handle. It fits…
A debowler (ashtray) slightly modified for ease of use. Wide landing spots for stogies and a center spire capable of gouging out bowls. A smoker's tray. Print instructions I used PETG because it stands up to the heat a little better.…
Fits perfekt. with and with out holes for Blades. link to Deburring Tool: https://www.aliexpress.com/item/4000688416090.html?spm=a2g0o.order_list.order_list_main.200.6ec71802dx3HqU
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
Another toolbox aside a Prusa printer. Remix from #17842 Prusa MK3S Mesh Side Boxes MMU2S. This can be printed with or without MMU. You can print the top and honey stl files in e. g. orange and glue it on the main part. Or you take all…
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
A custom bin I made for a hexagonal deburring tool you can purchase from AliExpress. Has storage for 9 blades. Holds 10 blades including one on the tool. Press to remove. Please ensure your handle is 105mm in length otherwise your tool…
(English bellow with deepl) Bonjour, J'ai créé ce modèle de pisse-debout pour une amie. Celle-ci a testé et après quelques itérations, a validé le bon fonctionnement. La taille est environ 11cm x 6cm. Le transport reste un point à traiter…
The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Remix from : 67961-deburr-tool-holder-entgrater-halter thanks to Sango
This model is compatible with the lego system.
I modified the case to fit the following tool : https://www.amazon.com/gp/product/B01L2XR4P2/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1 I also increased the size of the magnet hole very slightly (.015mm) for a better fit with my…
I wont a support for my Deburring-Tool and can't find a suitable Solution for the Honeycomb Wall, where I can place the Replacement-Blades. Feel free to remix it. STEP-File provided. My Print-Settings: 0.2mm PLA “Bavaria Filament” Silver…
Update Nov. 3rd 2024: There is a new improved debris bucket remix (Prusa XL Bucket for 16.5mm wide nozzle brush.stl with 16.9mm cutout) Update Dec. 12th 2023: When using the nozzle adapter and if the snap-in lugs do not fit properly (then…
Hold you De-burring tool with ease! Slot in the Middle allows for easy-grab access with your thumb! Notes: This model only support the hex shaped deburring tools that have a face to face width of 12 mm Holds 10 spare blades. Has a snug…
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
A small holder for your skadis wall to hold your deburring tool. It fits the classic ones with the big blue handle (22mm circumference). has to be printed with supports under the skadis brackets.
deburring support - Honeycomb storage wall - STEP files
*It appears that Elegoo has changed the design of the bracket that these were meant to mount to. Check to make sure your bracket is the same length as mine in the picture or these will not work. Small covers that can be installed to block…
Printed on a AMS system but any will do. I included a .3mf file for ams and a stl file for single color. Scale to sized needed. If you want to fit more debbies scale bottom box in Z only direction. 15 % infill .2mm supports(top lid)
Revolutionize Your Seed Cleaning Process Tired of spending hours tediously cleaning your harvested seeds? This 3D printable seed separator offers a quick and easy solution that saves time and money using ordinary house hold equipment - a…
This part is exactly 25mm wide. This means you can place several holders next to each other without losing space. You don't need any additional parts to attach this part to a multiboard wall. It is designed with a “Tight Snap” connector.…
A gridfinity holder for a generic hexagonal demurring tool that's 4x1x3 units and stackable. There seem to be a lot of these tools in this shape, so I think it's a clone of some specific brand but I don't know which. Fits a tool about…
This is a "first working version" prototype. I have several plans to refine it. A remix of Crossbow, Western style and others The scale of your crossbow is dependant on the size of your build plate, at this scale you will need a…
A modification of a pair of big sideboxes for Prusa MK3 (see https://www.printables.com/de/model/110699-side-box-prusa-i3-mk3s-left-right ). This sideboxes fits the MK4 modifications. It has a cutout for the USB-Stick. Printed with PLA.
Saint Seiya - Taurus Aldebaran gold saint
Holder for Silverline 248844 Expert Deburring Tool 145 mm, there's another holder in the remixes but not fit for the Silverline so I made one from scratch. Easy print: PLA // 215C // 60C // 4 Perimeters // 0% infil // 0.2 layer height
Spike is removable as with time the spike will wear down with time. I recommend using 100% infill for the spike as otherwise it can break while screwing it into the bowl. Other than that I used .2 layer height and had no issues with the…
This is a widebody Dodge Charger with a simple and strong design. The car has thick side fenders, big wheels, and a low stance to make it look more aggressive. It is made to print easily and look good on a desk, shelf, or display. Great…
Small Ergonomic Handle for Deburring Tool - Deburrer Tool - Mini sbavatore NEW VERSION This new version is much sturdier than our old one Optimized profile for better resistance and ease of printing Optimized filament usage Recommended…
2 part design to hold my deburr tool. Will probably also work for other tools with diameter less than 14mm. Attaches to the honeycomb using the M4 insert in the original design.
Deburring Tool Case I designed this tool case for a deburring tool and its replacement heads that came in a cardboard box. This tool case has a print in place hinge. Magnets hold the case shut while providing a satisfying snap as it is…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
I look for efficient designs and, while here are many deburring tool holders already available, none met my criteria. I wanted blade storage, but towards the wall so I'd be less likely to accidently grab a blade while retrieving the tool.…
Inspired by Dustin Fickert's debris covers on Printables (@DustinFickert_397996), I designed my own version from scratch, incorporating several enhancements. While the original design was great, I wanted to tailor it to my preferences. My…
The Core One has a crevice underneath the side panels where debris can collect. I created a wedge that fills this gap to prevent that. Included is a wedge with no magnet cutouts and a few variations for common magnet sizes. If you use the…
Hello All, This is an insert for my rugged box deburring tool case here: https://www.printables.com/model/551996-deburring-tool-case-150mm-afa-tooling-rugged-box-s I noticed there were a few folks who were cutting or modifying the insert…
