6,644 models
Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
Printed with Winkle's Marble filament with a 0.6 nozzle for speed and it looks quite good. If printed with a 0.4 one you'll definitely get a better quality. I used support (only touching the build-plate) on the base piece, as the…
Gyomeland M53R, a custom Magic: the Gathering Commander sized deck box. Inspired by the industrial kitchen ranges sold by Garland, this new and improved design features: Improved Oven Door, securing your 100 card Commander deck within.…
This is a simple deck holder for your playing cards. There are several sizes included: Poker sized (63.5mm x 88.9mm / 2.5" x 3.5"), single deck Poker sized (63.5mm x 88.9mm / 2.5" x 3.5") double deck Bridge sized (57mm x 88.8mm / 2.25" x…
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Make sure to check out my updated remix that integrates Neebick's stand! Remix of JordanK's design because I was still having trouble squeezing the cable into the box while still being able to close the lid. Increased the external height…
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
This Magic the Gathering Case is made to store sleeved cards. It holds a 60+5 cards deck. Some different styles of the Topcases are provided to enable multicolor prints that doesn´t need the usage of a MMU. It still contains a blank Top…
Slicer: PrusaSlicer 2.5 Nozzle: 0,4mm First layer height: 0,2mm Layer height: 0,16mm Infill densitiy: 10% Fill pattern: Adaptiv Cubic Generate Support material Alle exakten Slicer Einstellungen sind im .3mf File eingebettet Druckzeit etwa…
Sometimes when our trash bin got emptied, it fell aside and the peg which holds the lid breaks. This is a quick replacement part for a SULO trash bin with 120l or 240l volume, very common in germany. It's shorter than the original one but…
Can 3d print as many as you like. Request more ramps i should make and i will make them. I can make you custom ramps.
Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…
For pattress boxes (https://en.wikipedia.org/wiki/Pattress) these are two covers: flat cover flat cover with fitting Distance of the drill holes: 60mm Outer diameter: 74mm Printed with white PETG. 0.2 mm Quality 15% Infill
As my first foray into complex 3D design, I created a custom deck box to house my “Gyome, Master Chef” Commander Deck for Magic: The Gathering. Modeled in Fusion 360, based on the Garland M43FTR restaurant-grade range. Features: Main oven…
This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…
Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.
The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers
Used to hold the cardboard tree and main deck for the board game Everdell. Our cardboard tree broke and I wanted something to attach the main deck to the tree for when the tree moved. Enjoy! Please let me know if you have any suggestions…
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
Deckt den Übergang von Heizungsrohren zum Fußboden ab. Es sind keine Schrauben nötig. Der Durchmesser der beiden Rohrdurchführungen ist 16mm. Translation DeepL Covers the transition from heating pipes to the floor. Screws are not…
General I really like the look of the official Steam dock so I tried to get it as close as possible to the original one. The dock used in this build is the 8 port uniAccessories dock. I like this one because it looks very clean, is small,…
A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…
Gedruckt mit Prusament PETG 0,2er Layer 70% infill
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
A Parametric, Vase-Mode Deck Box! This parametric deck box has been designed to hold a full 100 card MTG commander deck. Some key parameters for you to play with include: Card Width Card Length Deck Thickness Box Wall Thickness Card…
This model expands the existing colour options by allowing you to use any filament you have in storage, enabling you to fully customize your Elgato Stream Deck + to match your style and aesthetic preferences—all without paying 19.99€ +…
made for the lcd deck - the dimensions of the cable of the oled version seem to be different. if i get the correct numbers of the plug from someone, i can update this model. otherwise please remix it yourself, link below] [ remix with an…
Your Stream Deck Plus clips in after you remove the stand. Mount this anywhere within reach and you're good to go. Please send back pics of it in the wild.
Adam Ijaz hates you. Dbrand made an adapter for the Steam Deck Dock but didn't make it for the--let's face it--far more common JSAUX dock most of us purchased before the official adapter came out. Thankfully, one of Dbrand's minions took…
The ASUS ROG Ally is a bit too thick to fit securely in a Steam Deck Docking Station. This adapter fits around dock, so that it has a larger front edge to comfortably hold on to the ROG Ally. A Steam Deck will still fit into the dock as…
English: A flower bottle cap to protect your lemonade, beer or any other drink against curious insects. It is especially useful in the summer against insects crawling into the bottle. The cap effectively protects you from bee or wasp…
About A box to store the cards from the board game root. Enough space for all cards from all the expansions, with or without card sleeves. Print settings I used a layer height of 0.16mm, no supports required.
A spool for the Steam Deck charger that doesn't require any supports by working around a 3D printers strengths. Just enable brim (important as the sides will tip otherwise before bridging), disable infill and print from the spool up. It…
So, it's a small model of a Hong Kong double-decker bus, for the bus nerds out there, it's the E6M or an 11.3 meter-long E500MMC. (my apologies for bad print quality, I used some cheap filament I got off Taobao.)
Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…
Alongside the Doctor Who collection for Magic: The Gathering, 40 new thematic plane cards were introduced for the Planechase game mode, sparking my need to create a case worthy of them. Any fan of the saga will unmistakably recognize this…
Hi, created a Flush-mounted lid since i haven't found any for my wooden interior which i liekd. It clicks and stays in place in the normal european (?) flush-mounted box. No supports, easy to print and only a small amoint of filament…
Moin, ich habe für unsere Ikea Gläser (365+ 45cl) einen Schutz vor Fliegen und anderen Insekten entworfen. Das Haus in der Mitte dient als Griff. Damit man sie jedoch platzsparend stapeln kann, sind die Häuser verschieden groß.
If you have lost your front cover, this is now the opportunity to simply print a new one. Wenn sie ihren Frontdeckel verloren haben, ist das jetzt die Möglichkeit sich einfach einen neuen zu drucken. Printed in PLA - 100% Infill
Just print the case and the caps for the unused ports. This prevents that the ports get dusty. Prints without support.
Ich bin von dem Modell „N-Day Dovetail Pill Organizer with Print-in-Place Snap Lid” von Jerrod H. begeistert. Ihm gebührt aller Dank. Da ich eine Tablettenbox mit vier Fächern benötige, aus der sich die Tabletten sehr einfach entnehmen…
Install with an M3 or M4 countersunk screw. I printed it as follows: PETG .1 mm layers .4 mm nozzle no supports 5 perimeters Would love to see your makes! :)
Remix of Deck box but modified to use two colors instead of inset design.
I love my Mechanism mounts and accessories for my Steam Deck. Although, I found it annoying that I had to take my kickstand off to attach anything else. I remixed these models to allow me to attach two mechanism mounts/accessories at once…
Much like my first iteration of this product, this tool allows you to have a perfect ½" overhang on your picture frame trex deck boards. This tool differs from the original in that you can lay your picture frame boards without first…
This kickstand card holder combo for the Steam Deck allows you to have a low-profile storage for 4 micro-SD cards and enables the Steam Deck to stay standing up on its own using a print in place kickstand. This kickstand card holder is…
*Update 6-28-24 * - This tool is for use when you already have your facia board installed, or are not running a facia board at all. For proper spacing and install picture frame deck boards before adding facia, please see my other version…
Revision 2 Dies Das ist Revision 2 des offenen Cookit Deckels und ersetzt die beliebte Vorgängerversion . Diese Revision ist passgenauer und vor allem formstabil. Die Vorgängerversion verformte ich mit der Zeit vor allem bei…
Stream Deck Mk2 snaps in and does not wiggle (assuming you're using original faceplate - not tested with printed faceplates).
Introduction The official Stream Deck stand is locked at 50-degrees. For me, this causes glare off the keys from my overhead lights. So I modeled a custom stand with the goal to mimic the original design, even down to the 2-degrees taper.…
Diese Kappen verhindern, dass sich Staub in den USB-Anschlüssen ablagert. Ich setzte sie bei einem Mini-Computer ein, auf dem die Homeassistent Software läuft. Gedruckt habe wie folgt gedruckt: PETG (denke aber das jedes beliebige…
Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…
Hier findet Ihr ein Modell der Kunststoffbuchse für die Seitendeckel einer Vespa PK50XL aus dem Jahre 1989. Sicherlich passt diese auch bei anderen Modellen. Es gibt eine vordere und eine hintere Buchse, da die hintere Aufnahme an der…
Replacement wheel for lawn mower deck Outside Diameter = 98.8mm Inside Hole Diameter = 12.2mm Wheel Width (ground contact width) = 50mm 282 Grams Designed to fit " Craftsman ZTS 7500 " 50-inch Deck
Hinge cap for the entrance door of Bürstner Club 1992 This is a recreation of a hinge cap of entrance door of a Bürstner Club caravan build 1992. You could use an UV resistant filament like ASA, but to be honest, a PLA print of this costs…
It contains three printable models to play MTG, which have been customized with a Lord of the Rings theme.
Der Tauschutzdeckel für den Omegon Radiant Sucher wird mit Hilfe einer M3x30 mm Schraube und einer M3 (Stopp-)Mutter am Radianten befestigt. STL-Dateien: overview - Gesamtübersicht (nicht ausdrucken) lid - Ich habe ihn auf der langen…
Balea razor cap / Balea Rasierer Abdeckung
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
The 2 pieces fit together to create the One Wheel. But if you want to buy the same bearings I have they are here .
Printed in two parts easily removable to be stored in a game box Size 90 mm, 85 mm high, thickness 3 mm Can hold 100 sleeved cards ( ultra pro) or 200 without sleeves Perfect for games like Clank! or magic the gathering . The cards are…
I have revised this great model due to the fact that I didnt like the original fitment onto the Modcase itself. I printed with prusament PETG 6 walls, 15% infill.
Beim nächsten mal würde ich den Teil, der hinter Sockelleiste ist unterbrechen. 2-3 Klemmen reichen statt durchgehend.
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Eine Displayabdeckung für Prusa MK3.5. Die Ecken habe ich mit Hilfe von feinem Schmirgelpapier ein wenig gebrochen. Translation: DeepL A display cover for Prusa MK3.5 I broke the corners a little with the help of fine sandpaper.
Das ist eine Batterieabdeckung für eine S50 oder S51. Ich habe das Model mit Fuzzy Skin gedruckt, deshalb die aufgeregte Oberfläche .
Der Deckel geht am Anfang etwas streng, das legt sich mit der Zeit, man muss nur ein paar mal hin und her schieben. Danach kann man es auch mit nur einer Hand verwenden. Was praktisch ist und somit muss das Glas nicht mehr geöffnet…
Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
I wanted a deck holder that let me take the full deck with easy for shuffling, as the rest of models in internet have the back in full.
Print with text up. use supports on build plate only.
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Ein Deckel der deine Bewässerungsanlage vor Frost, Regen und Wettereinflüsse im Allgemeinen schützt.
For the new profile Trex boards (and possibly others) this template helps you mark for the correct screw or pre-drill location I used PETG since this is going to be left in the hot sun and I don't want it to warp Also included are some…
I am a Big Yugioh Fan and i wanted a special Deckbox for my Cards. So i printed myself one. The Box closes not bad but you have to clean a little bit around to make sure it closes and opens properly. The first Time when i closed the Box,…
Hakendreher Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Ich wollte den Hakendreher von Festool unbedingt im Deckel haben: Damit der in den Deckel passt, muss er leider mit einem Winkelschleifer oben/unten etwas…
GHot tired of losing my stream deck on my mess of a desk so adapted a previous model to suit my needs. Still needs screwing in the same as the previous model, and in addition needs M3x15mm screws top mount the faceplate to keep the device…
It snuggly fits to the feet of a Hercules Inpulse 500, even when you lift the deck, the feet stay on. You have to push them on at a slight angle, kind of counter-intuitive, but I promise they hold fine afterwards. Print it with any…
This circular lid with a 3mm hole in the middle covers a connection box that is usually put in the wall. As a spare part that cannot be bought anymore it protects you from putting your fingers onto high voltage. The box should have a…
Replacement clip for ceiling lamp CAD Model https://cad.onshape.com/documents/840df879e6c52cae756c6f37/w/ac2896902a77f3167429e211/e/9f5877f65bd6df7ce6ed1523?renderMode=0&uiState=652c3aea1c89450369946213
Diese Abdeckung ist passend für die Kettensägenmodelle 051, 075 und 076 eines bekannten Herstellers. Da die Bremsabdeckung nicht mehr im Handel angeboten bzw. auch nicht mehr produziert wird, habe ich zwei originale Abdeckungen…
EN: Cover for an aluminium profile with the dimensions 30x30mm. DE: Abdeckung für ein Aluminium-Profil mit den Abmessungen 30x30mm. Print instructions: Material: PLA / PETG Infill: 0% - 15% Layer-Height: 0.2mm I printed it on a Creality…
Dies ist die eine Deckseite für den 1 m - Stein, um daraus einen oberen Steine einer Reihe zu machen. Dafür muss beim Zusammenbau der Gießform lediglich die Noppenplatte durch die Deckplatte ersetzt werden. Dann gibt es keine Noppen mehr.
Black&Decker Workmate WM825 - Stanley Deluxe 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Neulich im Repaircafe wurde ich gefragt ob man mit den ständig kaputt gehenden Deckeln für den Duschablauf nichts tun könnte, da habe ich eben mal anhand der kaputten Vorlage ein Modell des Deckels erstellt. Gedruckt habe ich das erst mal…
Caja para transportar dentro de una mochila el StremDeck y evitar que se arañe
This is a remix of the phenomenal Spacemouse Handrest with Stream Deck Mount by BC-3D! I was given a SpaceNavigator that was removed from some industrial equipment and didn't have the stock metal base. I considered making a printed shell…
Die Abdeckung dient zur Personalisierung und schütz die Aufnahme vor starker Verschmutzung gerade in einem Betrieb mit mehreren Mitarbeitern weis jeder gleich wem welcher Schrauber gehört. über likes Markes und follower würde ich mich…
Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry). Tolerances were made for printing at 0.3mm layer height. IMPORTANT! Print the top…
Kann z.B. in Stallschränken eingebaut werden, damit die Mäuse nicht durch die Lüftungsbohrungen in den Schrank gelangen.
Increases the angle of display for the Elgato Stream Deck MK1
Halterung für SKS Luftpumpe, Deckenmontage / Bracket for SKS air pump, ceiling mounting
This is our first attempt to create something with FreeCAD and print it with our PRUSA printer.
Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.
