50 models
Read carefully before downloading the model!!! Dragon clock faces (clock dials) 20 cm / 15 cm (two colours / three colours) - set of four These clock faces may be used for a real clocks. Just add a clock movement and hands, which you can…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
This frame is made to follow the 2 mm thick dial and completely cover the walls of the dial opening. If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
I got tired of using dice for wounds and such when playing Warhammer 40K and other table top war games. I didn't really want to spend $5+ per dial from various websites and I didn't love most of the designs on the inter-webs so I got…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Are the tiny little shafts on your potentiometers not fun to twist? Throw a custom cap on it! 6mm internal hole, fits my 1/4" potentiometers snuggly. A recessed hole exists in the bottom of each cap to accommodate a few millimeters of…
Z axis Dials that go over the Motor cog, from the front of the machine you can observe the small adjustment of the Z
This is a sliding type lock with three separate double dials that can be set to any number 00-99. I have made this as a part of sort of escape room like puzzle game for my wedding. The three numbers were results from other tasks, so this…
These dial-based damage and power tokens count from 1-10 and are intended for use with Marvel Crisis Protocol. The dials are remixes from some awesome dials found on Thingiverse with some enhancements to fix some mesh issues and to…
Flipped the position of the numbers and the hash marks on the dial for direct alignment with the marker on the outer ring. Added two font options (modern and antique :) Awesome original design giedzinski! Thanks!
Version 2 Added next Version on 29th of December 2024. Bases now have a socket that holds the magnet Double sided dials will be inserted into the socket Magnets needed reduced by half (1 per base instead of 2) Dial Tops from version 1…
New version here → QIDI-TECH X-Max/X-Plus Ratchet Dials - V2 I think these should be the default on any printer, as the lock nut system is annoying, and the printers that have no lock nut, well lets say, is frustrating to have to keep…
Compact Magnetic health dials (approximately 70mm x 38mm) intended for Marvel Champions LCG intended. Each dial uses 6 press fit magnets (5mm x 2mm) and is designed as a multi color print. Dials track up to 0 to 99 hit points. For each…
Intro These are some designs for improved usability and/or improved fun factor for the Bilresa scroll wheel remote. The idea is to stick them onto the scroll wheel by either using double sided tape - or if you prefer a more permanent…
Control knobs to fit over the stock 2007 heater controls. Add some colour and better grip.
I designed these dials to improve the ease of reading the handwheel dials on the MX-210v mini lathe, the stock dials and very difficult to read. I recommend that you squeeze some black RTV into the recessed dial markings to get the best…
It is the same like the previous but without g-codes. There are also more pictures. Read carefully before downloading the model!!! Very simple clock faces (clock dials), set of eight, two colours Model 67 has got three colours. I prepared…
Read carefully before downloading the model!!! Very simple clock faces (clock dials), set of eight, two colours Model 67 has got three colours. I prepared four variants of the dial: A is round, measuring 20 cm, B is a wide oval 24x20 cm,…
Angepasste Version der genialen Ratchet Style Bed Level Dials von NexGen-3D-Printing für den QIDI Tech i-Mate . Maße habe ich von meinem i-Mates S abgenommen. Sollte aber bei allen i-Mate Varianten passen. Erstellt in Tinkercad.…
This is a drop in replacement for the original Taranis Q X7 Menu Buttons, Power Button and Dial. I printed these in neon yellow saintsmart TPU and after some tweaking of the model these fit and work absolutely perfect for me! Except for…
I desinged these some time ago to replace the original ratchet dials for the older X-Max and X-Plus printers but never got around to uploading them, these are imporved over my ealier design, the fit more snuggly and install easier, they…
A 6-dial Deej! The deej project is a DIY physical volume mixer for your computer and you can read more about that on its git repo: https://github.com/omriharel/deej This is my basic slim housing to get my volume knobs somewhere within…
Printing Options STLs of each part if you prefer to work from a blank file of your own. 3mf file that contains ready to go plates of: Each end cap paired Each common central gear & ratchet combo Each dial number in batches to align with…
coasters 10 cm, two colours; dials 15 cm / 20 cm, three colours
Parametric Letter Dials for Masterlock 1534 Copyright 2024 by Wesley J. Landaker This design can be used to easily create custom dials/tumblers for the Masterlock 1534 combination lock. This can be done with any letters, numbers, or…
Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…
A dashboard designed to take 3 x “Universal Motorcycle Tachometer Meter Gauge” and a Sparkfun Microview OLED / Arduino to run them. The legs attach by putting M3 heat-set inserts into the back of the main dash and then using M3 screws.…
Ben Franklin clock with inset numbers / etc. I found it easier to fill in the inset numbers with paint then lightly sanding the rest back to the color of filament used.
I really love the Gaslands Dashboards from Burn In Designs. But the dials did not have enough contrast for my old eyes. I tweaked the numbers on them to be more correct. Hazards - 0-6 Audience Votes - 0-9 Hull Points - 0-24 I also added a…
Gridfinity dashboard module for 8.8" 1920x480 ultra-wide touch screen and 3 M5Stack dials I used this display: https://nl.aliexpress.com/item/1005003014364673.html (with touch) Requires interface plates and magnets to connect to a…
I liked the design from ViperMan but wanted a couple changes: A stronger connection between the bottom and top pieces Indented numbers so I can paint them without the top scraping off the paint The top and bottom weren't staying connected…
This LCD Knob is intended as Adapter to screw on bottle caps from your favorite or most recent beverage. Fits Caps used in my region. The thread seems standardized in the beverage industry, so should fit most central europe countries.…
Gridfinity dashboard module for two M5Stack dials Requires interface plates and magnets to connect to a Gridfinity base plate . Print bracket on the side. No support material needed. You need angled usb-c cables (or just connect power…
The design is ideal for creating a personalized puzzle or riddle box for a friend, combining the mechanical challenge of the dialbox with the custom aesthetic of the chest. Key Details: Compatible with the Prusa MK4 or similar printers.…
Replacement covers for galactic republic dials.
PAVILIFT BAGUE DE PROTECTION POUR CADRANS DE SERRAGE
DIals to Replace Rebels Cardcorad dials in Xwing game
This is a continuation of the work done by Thingiverse user dwildstr , who made the results dial 10043 with the pins built in. I got the debossed models from Thingiverse user RestoredOlive . Please note, I am not finished with my build,…
These are replacement dials for the PC Air Fryer Toaster Oven model PC5637. The printing on the air fryer's original dials rubs off very easily, with a dial's readability dropping to zero in very short order. I recommend using PETG to…
Plastic Dials to replace New Order DIals in Xwing
This is a spool for holding wire radials for a portable antenna. I wanted it to have some weight to it so that you could unspool it and lay it on the ground and be sure it doesn't coil back up. There's a 2mm hole for inserting the end of…
Small peg for radials. this is a Version with the wirewinder on top of the peg so the winding is easier and the wire is closer to the ground. I wanted a solution to store the eight radials of my portable antenna individually and also…
Print this for a replacement or customized knob for my dials and joysticks. FDM allows for multi-material use, such as for the touch area . needs 3× M3 heat inserts to merge the touch ring with the body → select the same material remember…
Better foot adjusting dials/knobs for PLUS Pedal by Gamechanger Audio. Tested to work with PLA and PCTG. Personally I think PCTG is better. Infill: 10%-50% Wall line count: 3 Follow on Social Media @planmarks Website: https://planmarks.eu…
Two pieces that snap together. Developped with https://manifoldcad.org/ https://github.com/jmettraux/crusade/blob/98af42faf0bf2232ee944838981053184cd67fa6/cad/blood.js…
Small peg for radials. I wanted a solution to store the eight radials of my portable antenna individually and also doubles as a peg to fix them on the ground, so they dont curl up. The pegs are slitted so a ziptie can be permanently…
I made this model to sit on top of a telescoping fiberglass pole tipped with an ACME 3/4-5 thread, a typical attachment mechanism for "painter poles". I am using this 20' fiberglass push up pole: https://www.amazon.com/dp/B0FP567P8S The…
Uploaded a .2 and .1mm tolerance version, either works well, just in case your printer has issues with one of them. I'm using without glue and they don't come apart from normal use, but can be pulled apart easily when focusing on them.
NOTE: Does not store followers and companions. Will design a different tray for that. Tray for: Enemy Standees Plastic stands HP Dials Activation Tokens NOTE: This can fit beside @bbosveld Item Trays:…
I made these for suspending 18-gauge lamp wire that I split down the middle to create two elevated radials for a 1/4 wave vertical whip antenna. These could be used to suspend the ends of a dipole as well. I designed the insulator…
I designed these dials to improve the ease of reading the handwheel dials on the MX-210v mini lathe, the stock dials and very difficult to read. I recommend that you squeeze some black RTV into the recessed dial markings to get the best…
