Armadillo
Armadillo
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant
- Downloads
- 1,415
- Likes
- 163
- Rating
- 5
404 models
Armadillo
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
This is an updated tool head stand, suitable for those having larger die nuts, or need to store primer slide assembly as well in the stand. No specific printing requirements.
Print approx. €8.84–€10.81 excl. taxPreliminary estimate for one variant
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
con el fin de facilitar la alimentación del filamento desde la cámara de calefacción he diseñado esta guía con rodamientos y una rotula, básicamente se inserta en el soporte del la bobina que viene en la ENDER3S1, la rotula tiene un…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Mango para cuadradillo de hierro de 2x2cm
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
dont use brim, be careful with scaling down
This model's fully articulated at all joints, including along the spine. It sits comfortably on your hand and also likes resting on things. I've uploaded both the standard and NoMagnets.stl/obj files so you can choose to print either the…
A cute articulated armadillo lizard
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
I wanted to make it multi-colored, so it took me a while to figure out the order of the parts from pictures and YT video from the original creator. In case anyone want to do the same, I upload my separate files for each color.
For a more convenient knob, insert a magnet into the slot. The magnet should be somewhere smaller than 0.315 in.
V2: Adjuster is now indexed in reverse (increase in weight increases in index). Arrow and plus/minus signs are wider.
This is a simple Empanadilla Maker (turnover maker). Empanadillas , also known in Puerto Rico as empanadas or pastelillos, are baked or fried pastries. Here in Puerto Rico we eat them stuffed with a lot of things, like meat, chicken,…
I started reloading 6.5 Creedmoor using H4350 powder on a Dillon 550C. Since H4350 is extruded, the Dillon powder drop varies up to 0.3 gr of powder per load for coarse extruded powders. This means that each case isn't receiving the exact…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
This is an extended collar for the Dillon 550 primer cup to keep spent primers from ending up on the floor. Tested on a 550c press but should work for all 550 series presses. There is enough clearance so the primer chute does not rub on…
CORDILLERA | Cutting-Board Rack Introducing "Cordillera," your kitchen's new best friend. This 3D printed cutting-board rack combines elegance with functionality to keep your cooking space organized and stylish. Say goodbye to clutter and…
Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…
I keep dropping those small locator buttons on my Dillon XL 650 reloading press... This tap/handle is making my reloading life a lot easier. Tip: To get better adhesion and give time for layers to cool - print 3 or more tabs at a time. >>…
Both small and large Dillon Primer pickup tubes: Small Primer tube = .183 ID x 5/16" OD Large Primer tube = .215 ID x 5/16" OD Note: Does not include the end fittings. Print instructions These are in 6" lengths, so use the 30mm long…
barandilla finger board recomienda hacerlo un poco mas grande de las medidas originales del modelo o al gusto
Dillon Powder Measure Label I created this powder label to slide over the clear plastic tube on a Dillon powder drop. A label can then be inserted into the main body. I have attached a label I have created already. If you need a label…
¡Descárgalo y añade un toque maravilloso a tus proyectos! Altura: 10cm
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary. I designed this version so the pick-up end of the tube would just…
In the project, there is the scaling necessary for the contraction of the ABS. It has additional support and perimeters. "YOU MUST PLACE THE METAL GUIDE PIN FOR THE SPRING" En el proyecto, esta el escalado necesario para la contraccion…
This is a fanart model of Big Dill from Fortnite. It needs to be printed with supports.
If you want to support me, you can send me some crypto and I'll buy a watermelon usdt(TRC20) - TPHUvYZXHKuB6Pj7wavXpkKApEzDJC83uN bitcoin - bc1qxh24prkt4mn6qv9jpyvwggnqd5nkrnx3qqsg94 ethereum - 0x9338A883Ac1bb7c75d7f6ca1A7D53c4021523369…
I did not print this. I added a hole with a heated drill bit, so I figured I would remix it to add the magnet hole in the tail. Category: Sculptures
This bullet tray is for a Dillon XL750, it is similar to the original Dillon version
Simply Dillon case ejector. Works with or without additional plate bearings. Also required M4 screw and nut. UPDATE: added "stronger" version 1.3 for weaker materials. If you are going to print using quality PETG v.1.2 is ok. ANOTHER…
Stand/holder for Dillon 650/750 tool head and related accessories. If you have large die nuts or need to store primers slide assembly as well, check another model here:…
hay que agrandarlo en cura recomiendo imprimirlo de unos 20 centímetros de largo mas o menos
Designed as an exact replica of the OEM Dillon 650 Tool Holder. Category: Parts
Glass eyes really bring this little guy to life! 3mf with modifiers uploaded. Holes for 6mm glass eyes will appear after slicing. Don't use a brim. I painted on some supports for the tip of the tail but you can print it without supports…
Replacement locator pins for Dillon reloading presses and 9mm size cases. These put slight pressure against the case as it indexes and eliminates wobble and cuts down on powder spill. I designed these to fit in my RL1100 and I would…
Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…
Dillon #2 and #3 pin with handle. Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: ,15 Infill: 100% Filament: Prusa PLA Post-Printing
This is part based on https://www.thingiverse.com/thing:2809150 but redesigned from scratch for better fit and for 3D Printers (no aluminium required). Use PETG or better. You should use spring and ball or screw with rounded head as a…
A stegosaurus themed holder for chips, street tacos, quesadillas — whatever!
This is my first ever published model, and yes, it's literally a square with a hole in it. I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to…
Made this to help make reloading easier and not have to spend the money on Dillon's tray which I'm sure is nicer but this works well for me. I printed this in PLA and ABS, both works just as well as the other. The Print in ABS from my…
DIllon 550 Bullet Tray. Smaller than the original. Can attach directly to InlineFab mounting plate. I didn't want to pay like $85 for a Dillon tray so I just made this. I don't really load too high volume on the RL550C and I have fairly…
For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…
based on https://www.thingiverse.com/thing:3265558 but redesigned from scratch. Now fits much better (IMHO) ;-) BTW. Here it is my site for reloads and reloaders http://reloaddata.pl Print instructions Category: Parts Print Settings…
Hornady and Dillon Case Feed plates, Needs large format printer 300x300 with no skirts or brims. Clutch requires 6-32 screws and nuts. Tighten just enough for it to slip and it'll work as designed during jams. Print Settings Printer:…
Replacing the steel Index Cam on the XL-650 with this Index Bearing Cam, you get a reduced wear, lower friction and a smoother reloading. It is much easier to feel whats going on, when reloading. To assemble, you will need: 1x 626zz…
When using a Dillon Casefeeder to feed casings to the Rollsizer and Decapper, the provided aluminum hose adapter has too much play and can cause the interrupt switch to get hung up. Replacing it with this unit, which has a slightly wider…
Hanger for the primer follower on the Dillon RL1100. I assume this will fit other models but I haven't tested it. The inside diameter of the clamp is 14.2 mm. Let me know if you have any feedback. Filament: eSUN PLA
Front bin cover/plate to make use of the entire bin commonly used in the reloading hobby. This will fit both Dillon and Amazon brand plastic bins. This particular one has been tested on a Amazon Purchased 5.5in wide bin which should be…
as posted designed for 9mm, easily modified for other cartridges editing the bushings. uses a spare primer return spring for shuttle return. currently using a rubber band for stage 1 return till i find a suitable spring. will need 1/8…
I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…
This is a round counter for Dillon 650/750 Reloading press, it could be used to count other metallic items I suppose. Remixed from a round counter for Dillon 1050 reloading press found on the internet a couple of years ago. The counter…
I was not satisfied with the stability and solidity of the attachment of the Primer feed body Stabilizer so I design a clamp. First model is only compatible with 550C frame so I design a second version to fit with 550B frame
Tool Head and accessory holder for Dillon 650 reloader printed out of PETG or PLA @40% infill. Could do less but test fully loaded.
A small armadillo lizard with half the print time of the original model ( Articulated Armadillo Lizard - Mini Dragon by Maty505 - MakerWorld )
Very simple STL to print the body of the primer buzzer. The body of my 40+ year-old primer buzzer was cracking and falling apart. I designed this to use as much of the original as possible. I also used the original screws and heat set nuts.
I found an OpenSCAD file for the Dillon case feed adapters and it did not work properly. I decided to re-write the file to work correctly and added labels to the case feed adapter. I have attached a few case feeder adapters for your view…
Drew up a new powder measure knob for adjusting the powder charge for a Dillon RL550B reloading press. Uses an M3 screw to secure it against the flat part of the bolt head. Recommend printing using PLA with 0.08mm layer height to get the…
If you want to take advantage of an action that is prohibited by the license, contact us using the chat on this profile.
🎮 Fortnite Fans, Check This Out! 🥒 I've brought a Fortnite twist to the world of 3D printing with my latest creation—the Big Dill Pickle model ! It's quirky, it's bold, and it's ready to be printed in all its gherkin glory. Whether you’re…
Standard replacement parts. 9mm (Dillon green), .223 (Dillon white) .38spec/357Mag (Dillon orange) Update 1: SHORT version redesigned to be more stable when using machine without case feeder. Update 2: Added version for GolluB Case Feeder…
Where to put that primer rod when the primer feeder is empty? Print one or two of the clips and now you have a place to put that rod - just clip them on the safety primer tube and store the rod when not in use (see photos). Also works…
The dill pickle from fortnite for the perfect gift
This is an adjustment knob for the Dillon powder measure bars. No need for a separate tool to adjust the powder throw. The knob includes information indicating how to increase or decrease the amount of powder thrown. Print Settings…
Dillon Powder Drop Seperator This sits on top of the Dillon powder drop. When pulling bullets it will allow you to easily separate projectiles out of the powder. This version allows for the Dillon lid to be set on top of the powder drop…
It is a knob for th epowder throw adjustment. My version has a hole for a M3 screw to lock onto the stock nut. The HEX is 10.9mm A/F to suit my Dillon press.
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
¡Descárgalo y añade un toque maravilloso a tus proyectos! Altura: 5cm
Replacement indexer ring. Should be a drop-in part, maybe tidy the inside of the ring or the pawl spring holder, depending on your printer. Printed top side down with tree support, very little clean up in PETG. Inspired by the original…
Easy to make a cute Armadillo keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
After ALOT of people asked me to make armadillo I finally decided it was time. Armadillo is a tornado interceptor made to drive into tornados. It was also the only tornado interceptor to be made in Texas! PLEASE DO NOT SELL MY MODELS I…
Baby Armadillo, Can be printed on A1 Mini. You can print in PLA, PETG, ABS. Support can be removed very easily if you use my 3mf! You can choose from original, or AMS Version. Enjoy
New items, upgrades, merged parts and templates for Cammon's Krokodillok Ce 6/8 SBB 1:32 Spur 1 Four different categories based on filenames: Template -> Template for drilling, gluing or joining. Merge -> Original parts combined for…
Work in progress Case holder. I printed mine as is with no supports. The small flat part at the bottom between the clip and the holder is meant to be removed, just added so I didn't need to add a raft or brim to help the clip adhere to…
Dillon Powder Funnel Die for 7/8-14 threaded presses. v2: Noticed some minor dimensional issues that didn't affect performance, but weren't optimal. Category: Sport & Outdoors
No special print requirements, use any crystal clear PLA filament for the LED diffuser part. Designed for “long” LED types, for example OSW5DK6E61A. 3mf and gcode files are created in Ultimaker Cura.
Bombardiro Crocodillo generated with AI Image used for generate 3d in picture Background of image removed with: Adobe lightroom / You can also use Microsoft image editor, which have implemented automatic background remover Ai generated…
This is a mod for the Armadillo SCX10 Off-road truck 3d printed hard body. Body can be found here: https://makerworld.com/en/models/556645#profileId-475535 It offers an alternative look for the roof. A flat version that is lower. Uses…
Cadillac sign printed in 4 colors, color change at 3.2mm 3,6mm and 4.2mm. I used white background, silver bottom of badge, dark gray sourronding the badge and text and finally black for Cadillac text. I used hilbert curve as toplayer
remix with painted punk skin
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
Parametric Dillon case insert slide. You can generate any one needed for your calibre. Attached sample works with 9x19
Just another Dillon locator pin tab. However decided to put on some style. The tab represents the bolt face of an AR. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 25%…
This design is inspired by these models: Lee APP ACP Universal Case Feeder Lee APP/Breech Lock Pro 4000/Six Pack Pro 6000 Case Feeder However, it has been adapted for use with the Dillon case feeder and features a tool-less system for…
Dillon XL 650 Toolhead Stand Print at 75% scale for Dillon 550 as per Wildcard97: https://www.thingiverse.com/make:343635 Apparently it sometimes prints the blank areas in a couple quadrants, might want to do a manifold check in something…
Cadillac Escalade ESV 2003, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…
Inspired by a post on reddit that did not link an STL, I decided to make this as a gag prize for a contest at work. Thank you to photoholic and aled96 for the source models, sorry to defame them in this way :) For easy printing, rotate…
The model consists of car body, small wheels, large wheels, small off-road wheels, large off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change the…
Put it on the top of your Dillon Powder drop and don't drop any powder anymore! :)
This little dragon can't breathe fire, but it sure has glass eyes! :) I printed this one with no supports or brims. Definitely weren't needed. Printed it at 0.16 layer height as I print 99% of all my stuff that I print. I think it came…
Wanted to connect my Dillon case feeder to my Lee 6 Pack Pro and APP. For some reason, the only adapters I could find were $45 on Ebay, which is absurd. There are 4 major components: Dillon case feeder to spring tube adapter. A spring…
My shop has pegboard walls (USA pattern). I wanted to mount my various tool heads for my Dillon 550 bullet reloading press so they would be handy when changing calibers. I found a really nice mount on Thingiverse but it was made to screw…
My problem was the original ammo bin. It's way too small. So I made a bigger one, a much bigger one. For this to work, you need the height extension for the press. Due to the weight of the ammunition, I printed the bin with hundred…
Cadillac F1 team inspired keychain, with a compact and elegant design. A perfect accessory for fans. Recomended print settings: Layer Height: 0.20 mm Ironing: All top surfaces Material: PLA, PETG ¡La pasión por la Fórmula 1 ahora cabe en…
My shop has pegboard walls (USA pattern). I wanted to mount my various tool heads for my Dillon 550 bullet reloading press so they would be handy when changing calibers. I found a really nice mount on Thingiverse but it was made to screw…