5,632 models
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
With these holders, the wall of a mini photo studio flows smoothly to the bottom. Suitable for A4 to A0 paper, thin cardboard. The left and right holder are the same. 1 screen holder is 17 cm high, 17 cm wide and 2 cm thick, making it…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for one variant
Woman | Girl | Fitness | Runner | Architectural figurines | People | Model Woman with long hair in sport clothes. She is suitable for 3D models of nature, spring, summer and autumn city. Printable for the most common scales (with girl…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
For all kinds of sheets. Also thicker ones.
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
I wanted a simple solution for a photo studio lightbox that could be stored with minimal space. Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square. Printing All the pieces were printed in…
Print approx. €4.55–€5.57 excl. taxPreliminary estimate for one variant
Miniature woman for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model Woman with long hair wearing jacket, pants, hiking boots and backpack. She is suitable for 3D…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the most common scales (with photographer height 185 cm): 1/12 scale: 154.2 mm 1/24…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Print lying on back with front upwards.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
These are shrunk-down files of a brick wall to 1/10 scale. These were used for the outside of a scale diorama garage. The parts interlock, so you can extend the shape to fit any project. Easy to cut as well. I used Hatchbox “brick” PLA.…
Print approx. €3.61–€4.42 excl. taxPreliminary estimate for one variant
The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Print lying down. Upload your makes, i would love to see them.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Miniature woman/reader for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
Protection For Radiomaster BOXER Controller Gimbals
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Dieses kleine Fotostudio ist perfekt, um kleine Teile in Szene zu setzen. Es wird in 3 Teilen gedruckt und lässt sich zusammenstecken. Anschließend schiebt man von oben ein DIN A4 Blatt hinein oder ein Stück Papier.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as a tourist. Printable for the most common scales (with girl height 175 cm): 1/12…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Print frame in black and engine in red/yellow or blue. Print upright . Join both finished prints with a drop of superglue.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Miniature accessory | Miniature | Diorama | Miniature Scene | Doll House | Vintage Customize the dimensions for your miniatures. For a more precise print without supports, I recommend printing in two pieces and then gluing them together.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Miniature businessman for your diorama, architectural miniature or as a figurine. Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
Man | Soldier | Army | Architectural figurines | People Printable for the most common scales (with man height 185 cm): 1/12 scale: 154.2 mm 1/24 scale: 77.1 mm 1/35 scale: 52.9 mm 1/48 scale: 38.5 mm 1/50 scale: 37.0 mm Print with tree…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Miniature accessory | Miniature | Diorama | Miniature Scene Customize the dimensions for your miniatures. I look forward to seeing your work with them. Have a happy printing time 💛
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I designed this to bend several diodes at once for some of the mechanical keyboard kits I've been building. This helps keep the bends consistent so they look nice on boards where the components are exposed. It's also helpful being able to…
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This is remix of Stamos fantastic Hifiberry Case . The original model was modified as follows dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT the case was extended in height to allow using the GPIO pins a hole…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for PETGSource material: PET
Organizador de mesa de estudio o trabajo personalizado, con cuatro compartimentos que le dan una gran capacidad para bolígrafos o elementos verticales, además de un espacio para elementos de bajo perfil y tamaño variado Impreso en PLA,…
Print approx. €11.65–€14.24 excl. taxPreliminary estimate for one variant
This mount adds a 5mm base to ensure that you can mount the screenbar without covering the displays camera/sensors. Updated to v2 with cuts for microphone arrays!
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant
2 piece "Radioacive Spiders" warning sign. Both Models have the GCode with a Filament colour change at the appropriate layer. If you desire to print from the .STL's (for those who print in PLA), in Prusa Slicer Follow the instructions:…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
I need a place to mount my HT and speaker mic and had a ram mount system I could use.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
Relive the nostalgia of the iconic Pokémon battle that started it all with this detailed diorama of Nidorino vs. Gengar! Capturing the intense face-off from the legendary Pokémon Red & Blue intro, this piece brings the battle to life with…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for one variant
Credit to original creator: https://www.thingiverse.com/thing:5206053
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Portal Diorama - Sharpie Holder This neat Portal Diorama not only will hold two Sharpies, but also be a nice looking print on your desk! Note that the left Sharpie needs to be inserted without the cap. Assembly: Print everything as…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Printed with PLA at 0.20 no problems. Print it right side up, as printing on face results in a bad finish in the tape groove.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Darth Sidious / Sheev Palpatine
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
printed in PLA, probably could be printed in TPU as well. Try printing without support.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Audio reel 7" - 3 part model, easy to print and glue toghether.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
Design These are designed to be compatible with the official Kato N gauge diorama kits 28-889 Kato UniTrack Diorama R183 & 28-888 Kato UniTrack Diorama S124 Straight Kit As used in the Kato Dioramacircus. These models offer support for…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Gum From Jet Set Radio. Gum (ガム, Gamu ) is a Rudie living in Tokyo . She is a member of the GG's , in Jet Set Radio Future . She acts as a teacher towards Yoyo at the beginning of the game, mirroring her role in the first game .
Print approx. €7.49–€9.15 excl. taxPreliminary estimate for one variant
Hello, I have the Perfect Family for your diorama or model railway. The figures are now in 1:15 scale. Here is the conversion for model railways, so you know how to adjust the scale: Scale Reduction Approximate height of the figure (cm) G…
Print approx. €9.09–€11.11 excl. taxPreliminary estimate for one variant
Like many, my Frankenquest using the Vive DAS suffered from the issue of the earphones flipping up during use. I read about the fixes involving tightening the screw under the foam (this didn't help, it's more for loose rotation rather…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
Print approx. €3.57–€4.37 excl. taxPreliminary estimate for one variant
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Print approx. €7.95–€9.72 excl. taxPreliminary estimate for PETGSource material: PET
I made a mobile phone holder for the CD slot for the original KIA radio, the holder is equipped with a 17mm ball to install any holder that supports this system. the back of the holder itself should be covered with self-adhesive…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Druckeinstellungen PLA Füllung 20% Schichthöhe 0,3mm Rand: “Diode_Boden-Stifte” und “Diode_oben” Stützen: “Diode_oben”
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Protects Radiomaster gimbal sticks with a diameter less than 8mm
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
This is the core of a variometer (also called a vario coupler) used in radios from crystal type to the early vacuum tube radios. I strongly recommend using a filament with no pigment, as many pigments interfere with RF signals. Print…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Openframe.stl is frame only (~2 hrs to print). You just cut cardboard back the outersize of frame and glue to frame. You can then paste your license print to the cardboard and there you have it using minimal filament (pla) hamlicense…
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for one variant
This model is based on the original Ham Chest Design from SwiftyTheFox. Thanks for sharing! This modification of the original battery tray enables you to store a single big battery instead of the two smaller ones. With the SCAD file you…
Print approx. €5.26–€6.42 excl. taxPreliminary estimate for PETGSource material: PET
Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
This model represents a realistic H0 scale parking bollard / car park barrier , designed for use on model railway layouts, urban scenes, parking areas, streets and dioramas . The shape and proportions are inspired by common European…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This is a control knob for attachment to a control spindle. It carries a pointer on an outer skirt. The back of the knob is recessed to allow for a thin control fixing nut so that the skirt can be very close to the panel. The knob is…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
The Canon EOS-M series digital cameras, especially the EOS M6 Mark II with it's mirrorless design and 32.5MP ASP-C sensor, is a great camera to get for astrophotography if your not looking for a dedicated astrophotography camera or full…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
The Elecraft KH1 HF radio comes with a 2600mAh battery which is huge capacity for that radio that would for four or five activations easily with that QRP radio. If you are only going out for a single activation or two a smaller battery is…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Ho maggiorato a mio piacimento il modello originale secondo l'utilizzo
Print approx. €13.75–€16.81 excl. taxPreliminary estimate for PETGSource material: PET
This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
This is my failed attempt making XIAO BLE as a Slime VR tracker. I popped a regulator and thought I should move on with a custom PCB. However, I want this as a stepping stone for future design of other wearable devices using the same…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for PETGSource material: PET
I printed Diogenes in TPU and the hammer head in PLA. I used a wood dowel rod to make the hammer handle. With some modification, I'm sure you could also print everything in PLA. The model was painted with acrylic paint.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Summary: This is a model of a mountain climber climbing a mountain. The model is print-in-place with no assembly. Print Settings: Layer height: .20mm Supports: Organic supports are needed only on the build plate Skirt, Brim, Raft: No…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
Support for DIO 54855 lighting module. Print support: YES Materials: 2 screws M3 x 6 Fix the support on the clips for fixing on the din rail (standard 35mm)
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Back connection cover. For Wago. 221-413 WO Logo.
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
We recently took our twin girls to an outdoor storytime for kids at a local bookstore. While we were there, I noticed another family hauled their kids to the performance in a Radio Flyer All-Terrain Steel & Wood Wagon. We currently own a…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Parts needed Raspberry Pi 3B+ IQAudio DAC Pro Official RaspberryPi Touchscreen 7" (Version 1) Rotary encoder KY-040 (axle diameter: 6mm) 4x Hexagon socket head cap screws M2x5 mm 2x Heatset inserts M2x4x3.2 mm (for both sides of the inner…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Designed a plastic shelf cap to support a radio on top of a Jetstream JTPS32MAB Power Supply. Printed it with PLA, and it has held up fine so far.
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
I wanted a cup holder for my Kenwood HT. I included a provision to have the charge cord inserted in the HT. This fits the cup holder on my 2019 Tacoma. It should many others. 15% infill with PETG.
Print approx. €6.12–€7.47 excl. taxPreliminary estimate for PETGSource material: PET
Built in camera of display is not covered. I used the slicer to make an additional slot for buttons on the left side of the phone. See images.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
Reportážní/studiová kamera na stativu v měřítku 1/10. Slouží jako doplněk třeba k RC závodům. Model je rozdělen na tři díly (kamera, spojka, 3x noha) nohy se přidělávají šrouby M3*9mm. Kamera a spojka mají spoj určený k lepení.
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
Cover for Shiit Valhalla Tubes Protect your tubes from dust or against damage Advice: Use only when tubes are cold Designed in Autodesk Fuson 360 Print instructions For print used PM Black PETG Advice use PETG, ASA, ABS or PC as Tubes…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
Other than in the remixed model, you don't need thread inserts; the included screws fit into the holes. Make sure not to overtighten them.
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
The Douk Audio U10 Mini Tube Headphone Amplifier comes with a perspex shield which I don't like. So I made this instead which when printed in eSUN Copper PLA+ I think looks better.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Easy to print. Dont use vase mode.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Sits on top of your accordion for easy sheet music reading when a stand is not practical or available. The hole for the button may need adjusted for your accordion. Mine sits firm, but may loosen over time. Could use some more work, but…
Print approx. €9.50–€11.61 excl. taxPreliminary estimate for one variant
This is battle cats figure
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
Krycí okénko přepínače vlnových délek TV
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
A detailed dice tower that can serve as a decorative diorama on its own. Prints completely support free. Happy printing! :) You're welcome to visit our shop at https://arsmoriendi3d.com/ Print instructions Print with your preferred…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
You need TPU to print this beautiful one piece musical instrument. Empirically tested to be a very good way to annoy your partner! How to print: Print the holey side on the print bed. I recommend printing it with 100% infill or enough top…
Another photo studio! There are quite a few of these online, however most are tailored to smaller backgrounds, normally A3 paper sized. When I photograph my props or larger items, I quickly find the limitations. Available now is a…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
All that photo stands I saw was missing one thing - strength. They fell apart easily. Others were to bulky to print. So, I made my own. This stand provides a sweep, or curved, seamless background for photographing small to medium sized…
Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths. Modular, very easy to print, this one requires no supports at all!!…
Some info about the whole build. In the diorama folder i give the base and the bridge part, and also Balrog and Gandalf scaled to fit on the bridge. That means that Gandalf needs to be printed small for this diorama to work and best way…
Made possible by my amazing Patreon supporters! If you like my work and want more models like this one you can support me in Thangs Darth Sidious, born Sheev Palpatine and also known simply as the Emperor, was a human male Dark Lord of…
