Search results: dipole

Sort order

156 models

P
PrintablesRyan-N2YQT

Linked Dipole Insulators

Linked dipole links. Use your preferred method to connect the wires (I use alligator clips). These can also be used as end insulators by passing the rope through the hole in the center. I printed in PETG at .3 Draft settings, and they…

Downloads
174
Likes
21
Rating
0
P
Printablessmurphboy

Yagi Dipole Holder

Inspired by the original, this print allows a dipole to be fitted to a 15mm or 20mm boom. Uses M3 hardware to secure 10mm Al tube (1mm wall thickness), and M4 hardware to secure to 15mm or 20mm boom. I print with supports for the base…

Downloads
131
Likes
13
Rating
0
P
Printablesf1nsr

Isolation mount for a 40 meter 1-element HY-GAIN dipole antenna

Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…

Downloads
62
Likes
4
Rating
0
P
Printablesww0cj

HamRadioDude's Dipole Wire Winder with Band Numbers

I like HamRadioDude's wire winder design, but wanted band numbers on the winder to indicate what it's tuned for. Haven't printed this yet but you may want to add minor supports at the bottom for the numbers.

Downloads
57
Likes
5
Rating
0
P
Printablescfeldhaus

UHF & VHF Dipole Center Mount for SotaBeams Mast

This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.

Downloads
38
Likes
6
Rating
0
P
Printablesfverri

110° V-Dipole Antenna for NOAA Reception

Overview This set includes all the components needed to assemble a 110° V-dipole antenna designed for NOAA weather satellite reception . The design allows for easy construction using readily available materials and provides a simple way…

Downloads
10
Likes
0
Rating
0
P
PrintablesMeshtasticCmoi

Dipole Antenna Support Case

3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.

Downloads
821
Likes
58
Rating
5
P
Printables3dprintguy

QRP dipole antenna for ham radio, or short wave listening

All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…

Downloads
703
Likes
130
Rating
4.83
P
PrintablesHamRadioDude

Ham Radio - Dipole and End Fed EFHW Winder with M5 Post Threads!

This winder is a little more Versatile than other iterations, subjectively. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke. Pictured is the dipole as…

Downloads
647
Likes
113
Rating
5
P
Printables3DSistem

Dipole antenna center

Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal

Downloads
609
Likes
94
Rating
4.67
P
PrintablesDL2MAN

Linked Dipole for 80/60/40/30/20m - perfectly macthing (tr)uSDX

Look at https://dl2man.de/linked-dipole/ for detailed instructions and look at the Video for seeing me setting it up, doing all the measurements and some QSOs. All files Printed from PETG in 0,15mm Layer hight, no supports needed. Make a…

Downloads
405
Likes
60
Rating
5
P
PrintablesC4 Designs

Amateur Radio Dipole Antenna, Guy Rope Winder

Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…

Downloads
398
Likes
82
Rating
5
P
Printablesdgardner

Amateur Radio Mini Dipole Antenna

Very small dipole antenna. Great for backpacking, POTA, SOTA, etc. Three different base connectors for SMA, BNC and SO239 connectors. Connect 2 lengths of wire to the base and clip on the connector. Search the Internet for “Dipole…

Downloads
344
Likes
83
Rating
5
P
Printablesvaxxi

Choke/balun case for center fed dipole antenna

I really liked the Dipole / Inverted V Balun Antenna Centerpiece from kaliway , but it was a bit of an overkill for a FT140-43, so here's a redesign. Features: smaller, thinner and more compact (should be less than 5-6 hours to print)…

Downloads
337
Likes
47
Rating
4.67
P
PrintablesJammerX19

Link Dipole

I wanted to build a link dipole for Parks On The Air operations that would be lightweight and easy to put up. I designed these pieces around 22 gauge stranded wire and a bulkhead mount SO-239 connector. Use whatever connector you want on…

Downloads
322
Likes
50
Rating
5
P
PrintablesPedja

Dipole Antenna Center Insulator for SO239

This is center piece for making dipole antenna. Uses SO259 connector for antenna attachment. Provides holes for fixing antenna wire and contact screws. I cut it from plastic on CNC milling machine. It may be 3d printed too but pay…

Downloads
319
Likes
25
Rating
5
P
PrintablesDC6GF

Linked Wire Antenna (e.g. Dipole or EFHW) Links

Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here ). With the wire I used (simple 1.5mm² wire from a local hardware…

Downloads
312
Likes
47
Rating
5
P
PrintablesThe Typical Ham

Ham Radio Dude - Dipole/EFHW Winder - 4Hole SO-239

Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”

Downloads
307
Likes
44
Rating
4
P
PrintablesRyan-N2YQT

Dipole Antenna Center Insulator

This antenna dipole center insulator is an amalgamation of several different designs I have found. It is intended for temporary QRP work. Your results may vary if used in a permanent application. I use PETG at 0.03mm for production and…

Downloads
305
Likes
30
Rating
5
P
PrintablesValentino Hesse

Antenna V-Dipole 137 MHz

The idea is that by arranging a dipole into a horizontal ‘V’ shape, the radiation pattern will be directed skywards in a figure 0 (zero) pattern. This will be optimal for satellites travelling in front, above and behind the antenna. Since…

Downloads
296
Likes
31
Rating
0
P
PrintablesJan_OM2JU

Shortwave Linked Dipole Insulators + Center

The size and number of insulators (with labels) can be easily modified in OpenScad model which is included. All files in ZIP archive: OM2JU_Linked_dipole_Insulators.zip Quick building instructions of complete Linked dipole are in…

Downloads
295
Likes
34
Rating
5
P
Printablespdxlocs

Dipole Antenna Window Mount

This mount uses threaded 1/4in aluminum rods as antenna elements. The holder is stuck to the window frame with 3m command strips. EDIT 12/6/21: Added an UNTESTED Dual-Band version by request. Fusion 360 files included! Print Settings…

Downloads
278
Likes
57
Rating
5
P
Printablesfreedom2000

Lora 868 MHz dipole antenna

This is a very efficent dipole antenna for Lora network. It is tuned for 868MHz frequency more information here : https://github.com/CongducPham/tutorials/blob/master/Low-cost-LoRa-IoT-outdoor-step-by-step.pdf Print Settings Notes: print…

Downloads
241
Likes
49
Rating
5
P
PrintablesRoyal Farris

Dipole antenna insulator center/end

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/d459KBbGIG8 Category: 3D Printing

Downloads
221
Likes
23
Rating
5
P
PrintablesLinas LY2H

Universal Doublet (dipole) Centre

Universal Doublet (dipole) Centre is designed to facilitate installation of a doublet antenna with the 450 Ohm windows-line feeder onto a 10m Spiderbeam mast. It allows to quickly deploy and rewind the antenna in the field. The…

Downloads
221
Likes
16
Rating
0
P
PrintablesNW6U

DodecaWhip - V-Dipole HF portable antenna system

WORK IN PROGRESS - near final revisions. *Please leave feedback on this tutorial and the prints. It will only help to improve the overall model. I am a big fan of open-source and improving upon established products and standards. I am…

Downloads
213
Likes
29
Rating
5
P
PrintablesKB9RLW

Dipole center with BNC and 1:1 balun

A simple dipole center structure with a hole for a BNC panel mount connector and space for a T80 torroid 1:1 balun. For field use. Category: Electronics

Downloads
187
Likes
49
Rating
0
P
PrintablesValentino Hesse

V-Dipole antena holder

A holder for a generic antenna that you can buy cheap on ebay or anywhere else. This auxiliary bracket is for fixing the antenna as a V-Dipole for receiving broadcasts from satellites noa at a frequency of 137 MHz. The antenna should be…

Downloads
183
Likes
24
Rating
5
P
PrintablesJosh Myer

Links for Linked Dipole / Inverted Vee

This is a linked dipole link which can be used with any 1.8mm OD wire. This includes the spool of DX Wire that I have here, as well as the 20 gauge silicone wire that BNTechGo sells on Amazon. I also used 2mm banana plugs to connect the…

Downloads
173
Likes
38
Rating
5
P
PrintablesJammerX19

Dipole center insulator and hanger

My off center fed dipole is 264 feet long and the center piece broke. I designed this to be more robust to allow the connections as well as rope and hardware for hanging in the trees.

Downloads
154
Likes
20
Rating
0
P
PrintablesMiaoucat

Connection Box for Antenna Dipole EFHW EFRW HAM

2 SIZE AVAILABLE, for QRP or 100W~ simple box for matching unit SOTA POTA portable operation. could be used to make a Dipole, EFHW, EFRW antenna. radio plug into the BNC, the Antenna into the Banana plug. item required: -4mm banana plug…

Downloads
152
Likes
25
Rating
0
P
PrintablesKB9RLW

Cage antenna spacer for ham radio cage dipole or end fed.

This is a simple spacer for 6 wire cage antennas. The 3mm holes should be fine for 18 ga insulated wire. After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes…

Downloads
149
Likes
9
Rating
5
P
PrintablesRyan

Amateur Radio Dipole Feedpoint and Insulators

Feed point and end insulators for a 20m DIY Dipole Kit. It is designed for RG-58 but RG-8x should work too, coax to be ziptied to it to secure it hanging vertically. Wires just tie to the holes on each end. Printed in PETG, although PLA…

Downloads
146
Likes
27
Rating
5
P
PrintablesTex_Tbone

V-Dipole Hub for CB Mirror Mount

This hub can be used to build a rigid V dipole using a CB mirror mount and two 17 foot telescoping whips. The antenna can be adjusted to operate from 20 meters through 2 meters. I modified this design from the hub used with my Savvy Yagi:…

Downloads
144
Likes
13
Rating
0
P
Printablespd3ron

Band Dipole Insulators 6 - 40 mtr

Insulators used in-between different band segments in building a multiband linked dipole. credit to KosherPorkRinds

Downloads
134
Likes
12
Rating
0
P
PrintablesPlankto

Wire Insulator - Dipole / Wire Antenna

Wire insulator for wire antennas, dipole etc. Category: Hobby

Downloads
117
Likes
17
Rating
5
P
Printablesgiammy_m

V Dipole antenna mount

This is a simple mount to create a 120° V dipole antenna, using the popular M10 telescopic rods. Here is a general parts list, your mileage may vary since I brought some components at a local hardware store: Telescopic rods:…

Downloads
114
Likes
11
Rating
5
P
PrintablesSatellietje

Dipole antenna

You are doing me a big favor by clicking the Like button :-) Good antennas are expensive. This it will cost you around 15 euros and works super. I use it at 86 - 87 MHz as a transmission antenna with 50 Watt Power. It has an excellent SWR…

Downloads
114
Likes
46
Rating
0
P
PrintablesLunchbox

Slinky Dipole Antenna

My custom designed slinky antenna. People have been making slinky dipoles for longer than i have been around, but i decided to design some parts to make assembly easier. I included a picture of the exact slinky i used. I bought mine from…

Downloads
110
Likes
30
Rating
5
P
PrintablesThump2010

Dipole/Doublet Center T

This is a center T for a Dipole/Doublet using window line. I printed it with 3 perimeters, 6 top and bottom layers, 30% infill Category: Electronics

Downloads
109
Likes
20
Rating
0
P
PrintablesLuboš Novák

VHF/UHF dualband Dipole v2

Přináším další verzi VHF UHF dipól antény vyrobenou Z prvků staré TV antény. Průměr prvků je 6 mm. Délka pro 2 m (170 MHz) je 2x 39,5 cm, pro pásmo 70 cm (445MHz) je 1x 29 cm, samozřejmě lze naladit změnou délky pro požadované frekvence.…

Downloads
105
Likes
19
Rating
0
P
PrintablesJurotom

Ladder line separator 25mm for dipole antenna

I liked the separator by DO7HAR but i felt like it wasn't wide enough. So i created from scratch very similar separator which keeps cables 25 mm apart. It is tight enough that it won't fall or move around the cable. I used it with 2 mm…

Downloads
102
Likes
10
Rating
0
P
Printables8815431

Dipole antenna core

Layer height: 0,4mm Supports: No Print with cable holes for PL connector on bottom.

Downloads
101
Likes
32
Rating
0
P
PrintablesHamRadioDude

Dipole wire insulator for Mini / Portable Ham Radio Wire Antenna

Simple dipole insulator for ham radio (Small wire antenna). I used 26awg. Enjoy. Tell a friend, or don't. Category: Electronics

Downloads
98
Likes
10
Rating
0
P
Printablesagmcmll

Dipole Antenna bracket

A bracket to create a dipole antenna using 1/2" (5/8" (16mm) actual OD) copper pipe, would work with EMT also. Designed to be bolted together will work with M4 bolts, or #10-24, or #10-32 bolts. The hole in the main body was sized for a…

Downloads
93
Likes
21
Rating
0
P
PrintablesPlanlos

Buddipole guying toggle plug

This plug is used to secure the toggles of the new Buddipole injection-molded guying ring.

Downloads
93
Likes
11
Rating
5
P
PrintablesLuboš Novák

VHF/UHF dualband Dipole

2mm wire 4x M3 screw Pro výpočet délky drátu použij dipol kalkulačku z internetu. Za pomocí analizeru doladit na požadované frekvence. To calculate the length of the wire, use the dipole calculator from the Internet. Tune to the desired…

Downloads
88
Likes
18
Rating
0
P
PrintablesC Mitch

HELTEC V3 Dipole

Heltec V3 specific dipole mount. Not finished but works amazing !

Downloads
86
Likes
35
Rating
5
P
PrintablesMiaoucat

V Dipole Hub for M4 Whip Antenna 118cm telescopic multi band HAM 2M Tripod mount 1.4m

[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…

Downloads
85
Likes
20
Rating
0
P
Printablesdb3jhf

Centerpiece for dipole antenna with symmetrical feed

This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…

Downloads
85
Likes
12
Rating
0
P
Printablesperja12

Dipole antenna with SMA connector

Parts needed to make a dipole antenna inspired by https://www.printables.com/model/235528-dipole-antenna . I have used 10 mm diameter copper pipe and cut to length using SWR meter (NanoVNA) according to the wanted frequency. From the wall…

Downloads
84
Likes
24
Rating
0
P
PrintablesTex_Tbone

Dipole Center Insulator

This is a 3D-printed center insulator for building a dipole antenna. Two versions are included: one for an SO-239 connector and one for a BNC connector. The enclosure has room for a 1:1 current balun. I used an FT140-43 toroid for mine…

Downloads
82
Likes
5
Rating
4
P
PrintablesMarcR

Dipole: Current Balun, BNC FT114-31

This is a mounting plate for a dipole antenna. this design is sized for an FT114 toroid. it uses M4 screws and a BNC chassis mount connector. zip ties are used to hold the toroid in place. the BNC cutout is sized for a BNC bulkhead…

Downloads
82
Likes
5
Rating
5
P
PrintablesAlzibiff

Dipole mount for weather satellite reception

The purpose of these files are to provide a means of mounting two aluminium rods to a length of 32mm waste pipe. Why? To form a dipole antenna for the reception of NOAA satellite data on the 137MHz band using an SDR receiver. Basic…

Downloads
81
Likes
9
Rating
0
P
PrintablesJeff Crossett

Ham Radio V-Dipole / Tripod Antenna System

Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…

Downloads
78
Likes
16
Rating
0
P
Printables3dprintguy

Accessory wire keeper and label for the QRP dipole antenna

These holder/labels work as accessories to the QRP dipole antenna center and end insulators. When cutting a wire to make the two elements of the dipole antenna I like to cut about 12” longer than expected to allow for tuning. After lacing…

Downloads
78
Likes
11
Rating
0
P
Printablesf1nsr

Yagi antenna clamps and dipole for 23cm or 869 or 915 MHZ

Elément diameter : 4 mm for 15 mm boom. use aluminum for the elements and brass for the dipole. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . This design remains experimental errors are possible. Particular attention will be…

Downloads
71
Likes
13
Rating
0
P
PrintablesTom-K2TAV

Buddipole mast adapter 1/4-20

work in progress. mount to take the Buddipole mast with the ½" pipe thread (versatee mount) to a standard tripod mount (¼-20) to mount the arrow antenna. the adapter will need a ¼-20 bolt added.

Downloads
71
Likes
11
Rating
0
P
PrintablesPlankto

Printed Dipole Centre Insulator

3d Printed Dipole insulator Light-weight and ideal for temporary portable operation with some wire and zip ties. Recently tested and used with a 80m doublet used portable during a 24 hour contest. Print Settings Printer Brand: RepRap…

Downloads
71
Likes
6
Rating
0
P
Printablescoliss86

v-dipole antenna holder with round base

I change the base to fit a PVC tube of 32mm in diameter. I have included the fusion file if you need to customize it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.32 Infill: 25%…

Downloads
70
Likes
7
Rating
0
P
PrintablesDeeDee

Element for making a dipole antenna

Covers for elements for antenna production https://www.printables.com/model/838846-covers-for-elements-for-antenna-production

Downloads
70
Likes
16
Rating
0
P
Printableswavexx

Sausage Dipole Antenna mount

Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…

Downloads
69
Likes
17
Rating
5
P
Printablesecspot

Choke/Balun cap remix for center fed dipole antenna

This is a remix of the cap from the original model to give a little more surface to handle the cap. The original model uses a reverse thread, and this one does as well.

Downloads
62
Likes
4
Rating
0
P
PrintablesJoshua Kaiser

Wire Antenna Coupler Dipole Antenna Center

Wire antenna coupler for making resonant dipoles or possibly delta antennas. This coupler is made compact and not designed for use with a balun or choke unless placed in line with the SO239. Designed for use with heat-threaded inserts.…

Downloads
60
Likes
7
Rating
0
P
Printablesgeokscott

Dipole Antenna

Mini dipole antenna base with BNC. I designed this for QRP operations with my IC-705 radio. Uses 4mm screws and has an optional 5mm hanger hole and wire strain relief holes for 20 gauge wire. I use 22 gauge teflon coated wire. Also…

Downloads
56
Likes
15
Rating
0
P
Printablesmlink

Foldable V-Dipole antenna with tripod mount

Foldable 120° V-Dipole for NOAA weather satellite reception. Can be mounted on a tripod for a portable setup. The halves are connected by two M3x20 screws. For the dipole I used two ~54cm long 4mm brass rods. The dipole is fixed to the…

Downloads
56
Likes
5
Rating
0
P
Printablesf1nsr

Linked Dipole Insulators for Wago 221-412

Overview Lightweight and durable dipole link insulator designed specifically for Wago 221-412 connectors. Ideal for portable amateur radio setups (SOTA, POTA, field days) to quickly connect or disconnect wire segments and change bands on…

Downloads
54
Likes
14
Rating
5
P
PrintablesHoonse

Linked Dipole Centerpiece

this is a small centerpiece for a portable dipole or linked dipole. it has space for a balun core and the cables can be directly winded on the centerpiece. there are also some spareholes to hang some other stuff on it. pictures will come…

Downloads
53
Likes
8
Rating
0
P
PrintablesOldManMike

V-Dipole Mount

Antenna mount for V-Dipole used for 137Mhz NOAA APT reception. Antenna original design by Adam 9A4QV. Use 3/8 rod or copper tube for antenna elements. Print with PETG material. 15-20% cubic infill. Units are mm.

Downloads
52
Likes
6
Rating
0
P
Printablesdean bryant

ham radio dipole insulators

printed with PETG-GF using stock settings on a centurion carbon printer the are just under a inch in diameter at .978" and just over 1-1/2" long at 1.576" the holes are 1/4" .250" you can scale it larger or smaller. happy hamming 73 from…

Downloads
51
Likes
12
Rating
0
P
PrintablesKB9RLW

Dipole center for window line antenna.

This is a center structure for building dipole antennas using window line or ladder line as the actual antenna radiator. I made it to use a BNC panel mount connector for a coax feedline. It could be modified for an SO-239 using most…

Downloads
49
Likes
9
Rating
0
P
PrintablesKarl'zGrafix

Dipole center V2

Dipole center insulator v2. Added clearance for a nut on the backside of the SO239 connector. Reinforced support.

Downloads
46
Likes
4
Rating
0
P
PrintablesGuyO

Dipole Antenna Pole Adapter

This is an adapter for a favorite dipole antenna insulator. The insulator is designed to take a .73" pole. This adapter fits into the insulator and adapts to fit a the bell end of a piece of 21mm (3/4") NEMA electrical conduit. I'll…

Downloads
46
Likes
6
Rating
0
P
PrintablesJurotom

Doublet dipole antenna center

Center part of the doublet antenna which i made from 2 mm wide old military cable. It has holes to secure the cables with zip ties. I used it together with my line separator…

Downloads
45
Likes
6
Rating
0
P
PrintablesHamRadioDude

Ham Radio - Dipole and End Fed EFHW Winder with M5 Post Threads!

Please share this with other printing groups, forums, etc. This winder is a little more Versatile than other iterations. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller…

Downloads
45
Likes
9
Rating
0
P
Printablesk8md

UHF Dipole

This is a very simple dipole for UHF frequencies. I designed it to hold 70cm elements, although I've also built it as a 1.25m antenna. I haven't tried elements for 2m band yet, I believe they would be too long. I have another design that…

Downloads
45
Likes
15
Rating
0
P
Printablesjostak

Dipole T joint

The oryginal antenna of Frsky R9m was too bad to use it, so I used the coaxial wire of this antenna, replaced the active and passive element and used this T joint to make a new antenna - well adjusted for 868MHz. Category: DIY

Downloads
44
Likes
5
Rating
0
P
PrintablesL3M4R

ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts

868Mhz / 915MHz Antenna Dipole cover and mounts To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament…

Downloads
44
Likes
4
Rating
0
P
Printablesredthemesetup

Ultralight Dipole antenna holder for Whoops

This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…

Downloads
42
Likes
5
Rating
0
P
PrintablesOK1TRL

Horizontal&vertical 6m/2m/70cm multiband dipole base

Features Variable frequency, user NanoVNA for fine tuning, Horizontal or vertical polarization, 3/8" (large tripod screw) for H and V, 1/4" (small tripod screw) for V polarization, dipole-base-your-mount for your convenience - use any…

Downloads
42
Likes
13
Rating
0
P
PrintablesKarl'zGrafix

Dipole end insulator

simple dipole end insulator for ham radio antenna building

Downloads
41
Likes
4
Rating
0
P
PrintablesAleliz

Sector 5 ELRS Nano Dipole antenna holder

ELRS Dipole antenna holder. I have a BETAFPV Nano Rx, but it should fit any dipole antenna. The distance is 18mm in between. The fit is as snug as it gets , it requires some patience to insert the antenna ends. Print Settings Printer:…

Downloads
40
Likes
3
Rating
0
P
Printablespklosko

NOAA_V-dipoleAntenna-Base

Simple base for 137MHz NOAA satelites V-dipole antenna https://www.rtl-sdr.com/simple-noaameteor-weather-satellite-antenna-137-mhz-v-dipole/ Tripod holder : https://www.printables.com/cs/model/541352-v-dipole-tripod-holder

Downloads
40
Likes
3
Rating
0
P
PrintablesDC6GF

Distance Element for Fan Dipole

Distance element for a fan dipole with four wires of DX Wire FS2 or similar (hole diameter is 3.5mm).

Downloads
40
Likes
6
Rating
0
P
PrintablesCrowdedlight

137 MHz Antenna V-Dipole for Wire

A remix adding hole for wooden rods and wire on top of it. Made as I didn't have aluminium rods and it was easier to solder the coax cable directly to the antennas. Made it easier for me to tune the antenna length to fit the 137 MHz, than…

Downloads
40
Likes
3
Rating
0
P
Printablesmrusk

Stratux DIY Dipole Antenna

A small housing to create a DIY Dipole Antenna for a Stratux (ADS-B or FLARM) out of a DVB-T antenna cable.

Downloads
36
Likes
9
Rating
0
P
Printablesdean bryant

ham radio dipole antenna center balun box

center support for dipole, windom wire type antennas for ham radio, drip guard is not necessary, just extra protection from water getting in the coax connector. Thanks 73 KE4ARI

Downloads
35
Likes
13
Rating
0
P
Printablestedk

7m Spiderbeam Dipole Center

This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…

Downloads
33
Likes
1
Rating
0
P
Printablesch3p4ll3

V-Dipole Antenna Bracket

a support to hold the antenna perfectly at 120°, perfect for receiving weather satellites such as NOAA and Meteor. The holes in which the antenna fits have a diameter of 7mm

Downloads
31
Likes
3
Rating
0
P
PrintablesHamRadioDude

Ham Radio Wire insulator OR Linked Dipole Connector, and More!

UPDATE, I hung 15 pounds with this. Seems legit M5 threaded post and a S hook. Inspired by something called "Cord Lock" at Ace hardware. As you can see, you can use it for strain relief OR for a end insulator on a dipole, efhw, etc.…

Downloads
30
Likes
1
Rating
0
P
Printablesryan_be

Dipole Arial mount

A basic first iteration dipole areal frame designed for high altitude balloons Print instructions Category: Hobby Summary A basic first iteration dipole areal frame designed for high altitude balloons

Downloads
30
Likes
4
Rating
0
P
Printablesn9dmt

Simple Dipole Housing (No Balun)

A simple dipole housing with no balun. The body has 5 holes in the bottom for mounting an SO-239 connector with an additional 6 holes surrounding that (3 to weave each element in and out of for strain relief). The cap has a hole through…

Downloads
30
Likes
7
Rating
0
P
Printablesmcbillsan

EFHW dipole transformer enclosure

This is an enclosure for an end fed half wave dipole antenna transformer. It is sized for a Fair Rite 264351002 ferrite core and includes a post to hold the core securely. For 3-30MHz, the transformer is a 14 turn transformer wound with…

Downloads
26
Likes
5
Rating
0
P
PrintablesHuisek

Paint Pole Dipole Center Support

Designed to use an extendable paint pole as a center support for a dipole. Prints in two pieces to maximize strength and simplify supports. Requires two #10-24x1 machine screws and nuts plus one SO-239 connector. The idea is the two…

Downloads
26
Likes
2
Rating
0
P
PrintablesKO4DDG

Fan Dipole Components

This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber

Downloads
25
Likes
4
Rating
0
P
Printablesatvfool

Dipole Element pole bracket

Printed on Bambu P1P with PLA-CF. Hole on the bottom fits a ¾ PVC pipe for a mast. There are holes too attach hooks if you'd like to hoist the antenna into a tree. The elements are made to fit this Telescopic Wire Reacher Disc Golf…

Downloads
24
Likes
1
Rating
0
P
PrintablesRaatzie

RTL SDR Dipole Centre

My Dipole centre broke so I made this a a replacement.

Downloads
23
Likes
5
Rating
0
P
Printablesp2xxx

V-Dipole Antenna 120

V-Dipole Antenna 120 thread ¼ 20 PETG

Downloads
23
Likes
4
Rating
0
P
PrintablesHazeCore

HAM Radio Quick-Setup Dipole

This is a 3D Printed Assembly for using 6mm Aluminum rods (hollow) as a Robust Dipole Antenna. Apart from the Print you will need: 1x 1/4 Inch Insert 2x M3 Screw 2x M3 Nut (for the inside of the Print) 2x M3 Washer 2x M3 Compatible Spring…

Downloads
23
Likes
9
Rating
0
P
Printablesrwjblue

Linked Dipole Link Insulators

Compact labeled insulators for a linked dipole. Two holes at each end route the wire, and a narrowed seat holds a small zip tie over the wire bridge. The default body is 38 × 10 × 2.6 mm. Print sets 40/30/20: two of each, six links total.…

Downloads
22
Likes
0
Rating
0