407 models
This bolt allows two different direction nuts at the same time. It makes an interesting fidget toy. Print instructions The bolt was made after seeing this video: And while it's a lot nicer in metal, the 3d printed variant still is nice to…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
Designed to fit in Artic P14 or any 14 cm PC fans to directional air flow.
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
There are many Makita LXT 18-volt battery holders…. this one is different! All the other holders you will see out there are unidirectional. You can only slide the battery on from one side. This one allows you to slide the battery on from…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
I made these for my wife who handed them out when she walked the Camino de Santiago in Spain.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Bi-Directional, Rotating Digital Controller Here we have a 3D-Printed Bi-Direction/1-Axis Disc Controller I made for my Arcade Prototype Controller . I've only used it for Stage/Unit select in games so far, but it also could be used in 2D…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…
*NOTICE* If your duct is not centered to the nozzle, please print the offset version of the duct that offsets the ducts 2mm to the right to try and correct for this. There does not seem to be a reliable pattern for what machines need the…
Opening a door as a firefighter, law enforcement officer or emergency doctor can be a challenge sometimes- but KEEPING it open can be just as important. If you are tired of jamming doormats and trashcans into doorways then this print is…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
ISO 7010 - Safe condition Signs (Emergency Exit with Directions) In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. I have uploaded profiles for AMS and without AMS, the profiles without AMS have…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
I found making the nuts into hex-nuts makes the spin effect more satisfying. Please check out Gijs' original design and show some support. The included .gcode was generated for the Mk3S, the nuts use more filament to give them some…
A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…
parts required 2x 3/16" washer (Ø14mm and 1.2mm height) 1x M3 14mm socket head screw (leftover from the Prusa MK3S kit). Slightly longer or shorter is okay. 1x spring from unused pen optional 1x M3 washer I was inspire by FreddyZ and…
UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…
This model is a bidirectional cable chain based upon the igus Triflex series energy chain. These are used to wire up rotational systems where the cable cannot be routed through the center of the axis of rotation. An example use case would…
Once I printed XTRUD3D 's chain for the Flashforge Adventurer M5 I realized that the filament sensor could not work in the correct way. So I created this additional holder for the filament sensor. Placed vertically, the sensor maintains…
Blog: https://dev.joesturge.com/p/3d-print-in-place-a-design-journey/ OnShape Files: https://cad.onshape.com/documents/5b146e263caac3060752204d/w/15bde26dc6901519c376ed2c/e/cecbda455fb1c20a8470df09 Features Fully print-in-place – no…
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
This is a 20×20×20 mm calibration cube with feelings. Rotate the cube left, right, up, or down — and every time it still says “I ❤ U”. No matter how you turn it, the message stays the same. Unlike most things in life. Designed to: Check…
My wife wanted a pumpkin clicky fidget for her elementary school class. I have a box of knockoff blue cherry mx key switches, and found the model that she saw online. Unfortunately, the included key cap wouldn't work with these off-brand…
This is a omni directional wind turbine designed to be installed outdoors on the rails of your deck or just stick it in a potted plant. This design will catch wind from all directions and the turbine does not have to face the wind. I have…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
This is a model of the anemometer with wind speed and direction measurements. The whole can be mounted to a 40 mm pole. Electronics inside contains 3 PCBs: AS5048 demo board from Austria Microsystems in a set with round directional magnet…
Update July 28th, 2020: Added a smaller version scaled at 75% for a quicker print time and to save filament, it's less than 5 grams. It's big enough to determine cooling quality but the normal version is a little easier to see the…
To vent exhaust air in a specific direction if you have your desktop up on a table like me. Reduced noise by ~3db (roughly, measured on smartphone at where my head usually is) idle and ~6db under load. Also heat isn't dumped near my face…
This replaces the cardboard wind direction indicator that came with the game. The one in the picture is with the background and printed in two colors. It fits perfectly inside the game component. Print Settings Printer Brand: Sovol 3D…
This is a modified XRP chassis with swerve drive modules. I tried to keep most of the original XRP features, so the size and mounting rails are the same. Both the battery and the controller are mounted in a frame as in the original…
Remix from: https://www.printables.com/model/767068-spinning-filament-swatch-display-lifts-swatches/remixes Wanted to have the model spin both ways so I just mirrored the ramp. Let me know how it prints for you! Mine worked great.
I have used various cable chains on my printer, but over time I wanted something simpler. So I designed this octagonal cable chain to solve all my problems! Each chain link is one piece (no covers to snap on!) No supports are required to…
The original model was shooting more air on the hot end so I made a cut that would allow more air on the build plate. PLA will work but I would recommend at least PLA+, its best to use PETG,ASA,ABS or other high temperature resistance…
print with 2 colors for best results. Alternatively print in white, and fill gaps with a low viscosity paint or colored resin I suggest 1x 0.3mm layer for the text, however, if your filament has a low pigment concentration (slightly…
Be kind this is my first post :) A print the scale 1 Category: Outdoor & Garden
Model designed in Autodesk Fusion. Antenna created with Moxgen software. Dan Maguire AC6LA https://www.ac6la.com/moxgen1.html Design under Autodesk Fusion360. Mount for navigation holder. Mount for Ikea Tisken suction cup.
This is a directional air duct vent for a 120mm PC case fan to guide the airflow. I would recommended to use support material as some parts of the internal slope are quite steep. It should be quite easy to remove this support material…
Update: (23/08/26) I have added a solid (not hollow) fire token for resin (SLA) printers - Any problems with it, please let me know. Update: (13/09/24) Thanks to push2flush I have just added a token that I had missed… The Directional…
These are single-piece directional Multiconnect snaps for openGrid that allows for increased weight compared to the non-directional version. This is a remix of origin415 's openGrid full/lite Multiconnect Multiboard Adapter but…
This is intended to not only check how effective your cooling is but also to see what side is not getting the air flow it should. For testing purposes disable any cooling print speed slow down. Slopes are at 45 angles so it should be very…
This is another one of those telescoping widgets, scaled into a smallish twisted cube. It prints in place without supports. I've included 2 models: one that prints ready-to-fidget, and another with small tabs across the bottom of the part…
These are omnidirectional mecanum wheels the fit 6inch hoverboard brushless hub motors. Here is a video of the assembly: https://youtu.be/QXF6hNVUydI I added three holes to use 0.125" roll pins to make assembly easier but they are not…
The Foam Comb (Fomb) is a simple printable tool for picking up nearly any dart type no matter their orientation! No need to aim, simply stab the ground with the Fomb to pick up darts and use the bucket fork to offload! The only…
I done this file, so long ago, I used the base of the original file with a lot of modifications in tinker cad, which was not easy for me LOL I needed to direct the heat away from my unit printed this upside down
Self made directional WLAN Antenna EXTENSION in YAGI style for 2.4 Ghz WLAN with regular copper rods. To optimize you WIFI environment. Instructions Use 0.75 mm² (1 mm diameter) Copper Rods for 2.4-GHz-Antenna-Extension: Position -…
This is a fully 3d printed mecanum drive for your XRP perfect for indoor and small spaces. For outdoor exploration I would recommend you some of my other mods like the xrp off-road mod , the xrp track system or if you wanna go to water…
Mlok mounted cigarette holder
This is a bidirectional bolt, inspired from https://youtu.be/cDfMI5ahbJI ,.
This is a highly redesigned remix of Shower Holder with swivel adjustment by owsam3dprint (May 04, 2018, https://www.thingiverse.com/thing:2892895). I like the idea of the ball joint but I don't like the direction that shower holder…
Huge props to the original creator @triton_9, I just remixed. This remix contains a few tweaks to the design; specifically: I created a female adapter so you can go the other direction The wooden track adapter/prong was too long for my…
Simple replacement for (I believe any) Makita Drills and impacts. Edit: added a V2, that has some adjusted specs, should be sturdier than original part, and sits flush with machine when pushed. Feel free to edit here (onshape)
Wind speed and wind direction sensor. Cups are not mine. Print Settings Rafts: Doesn't Matter Supports: No Category: DIY
Remix to divert exhaust straight back. I was looking for similar files and liked the minimalist design, however I did want the exhaust to go back as I do use the short attachments. I was finding the regular exhaust was blowing debris…
Anemometer with wind direction indicator. User Creation Mix: neovista85 - Thingverse I modified the original project to insert bearings and make some mechanical and aesthetic improvements. Known issues: -The fitting of the wind spheres…
Small = 20mm bridges, Large = 40mm bridges. Print in .20mm layers. Benchmark overhang test for 3D printers.
This is a 12-sided omnidirectional speaker design inspired by https://www.thingiverse.com/thing:24308 (but designed from scratch). It fits 120 mm speakers (YD120-1). I will try and provide a more detailed description of the build, but…
Best to be printed on a Multi-Colour Printer. Can be printed with only 1 AMS Hinges can be made from a cut piece of filament. Model updated 15/11/24 as I wasn't happy with the hinge strength on the base plate. I've included an updated…
I added a 3-tool verison of Kyu_u's orginal model. I also included a 3-tool model with the mount facing the other directions which works better for some m12 tools. The “Inner” is the taller part of the battery is closer to the wall. The…
Noctua posted a teaser video and images of this design on Twitter. I looked at the images and designed this. It works alright with NF-P12 I printed with custom paint-on-support
I stumbled upon a pair of these vintage loudspeakers on Craigslist and while I couldn't justify buying a full-sized pair, I thought they were so unique that I wanted to recreate them in 3D printable form. Each speaker consists of a top…
This robot is meant to be an improvement to the existing XRP robot drive base. The robot utilizes three omni-wheels to allow the robot to move in any direction at a time. By enabling holonomic motion with this drive base provides students…
This is a remix of Chance's Talon Mag Couplers (which are also compatible with Tachi and Koda mags) to face the same direction. I appreciate the intent of the original version which lets the mags face opposite directions so that the…
I designed a fan cover for my enclosure of the 3D-printer. To avoid that the air flows direct to the printer I take the cover to change the flow direction. I use it together wit a Noctua 92 mm fan. Print Settings Printer Brand: Anycubic…
I looked at the duplo compatible bracket and thought, hey, why not do this is every direction! My eldest child really loves this one. They used it to make a robot head : )
The T shaped directional golf ball stencil insert provides a fun marker friendly logo that stands out on any golf ball that works with the PrintSphere Golf Ball Stencil Holder ( hinged or unhinged ) or the Golf Ball Spray Paint Stencil…
This is an Dremel press extension for the Highly Adjustable Ball Vise System https://www.printables.com/model/1109371-highly-adjustable-ball-vise-system You can engraving sanding drilling ceramics, wood, 3d printed parts form all…
There are no tolerances built into these models, so you can add your own xy-tolerances in your slicer of choice. (in S3D the setting is called Horizontal size compensation)
This is a remix of Syntaxcuemi3D's Twin Wheeled Filament Guide. This Is a multi directional filament guide for Spools mounted above printer. Not only does the head turn, but it slides in the top channel for least amount of resistance on…
I needed a quick way to splice 4mm OD PTFE from my Bambulab AMS to my P1P, and needed it to have no resistance as it was being fed through. The center guide is slightly larger than the 2mm ID as the filament exits the AMS side, and…
Open Cable Chain link from thing:611593 that can bend both ways. Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15% Category: 3D Printer Accessories
Here's a couple of omnidirectional scrapers you can use for removing prints. I've resized them to something a bit more appropriate (i.e. 50% of their original size). Note: I didn't update the renders of them, so they just look large in…
Please let me know if you have any trouble with this! This was a first attempt there are definitely things to improve, so remixes welcome! I have not had a chance to test in different wind conditions, so YMMV! Printing: Consider adding…
Blackmagicdesign Mirco Converter BiDirectional SDI/Hdmi Holder The converter slides in and does not slide out. I sliced with Cura and used tree supports for overhangs. Cheers Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
The wheel adaptor will fit over the main button relay but you will need to change the Hex bolts to M4 16mm instead of its default ones. To attach the wheel - wood screws 8gauge 14mm x6 screws My settings .2 layer height 3 walls 60% infill…
This is a remix of the Chimes_Industries wheel, built for installation on 12mm RC models, easy to install and removable
Easily attach your rockit to any stroller or bedframe. Single print can be attached in any feasible direction with just two zipties. Prints without supports easily if printed on the small, bottom base. None of the other existing models of…
Cam lock that visually shows you when it is in the open direction. I had found my v0.2 r1 cam lock would often move out of alignment when the lid was open. With a hex this was hard to tell. The arrow points to the opening to resolve this.…
Mounting a Blackmagic Design BiDirectional SDI Converter to a DAP 2HE 19" Rackmount . Combine with other available Parts for RasperryPi and others. Replace the existing M3 screws on the bottom with two M3x8 or better M3x9
This is exactly the same as the remixed library however it allows the grid to work for vertical shapes as well as horizontal. Just call cuboid_grid([x,y,z], hex_width, wall_width); And the grid will render on the side with the largest…
Hardware: M3*20 Hex socket machine screw: 4 M3 nut: 4 4mm diameter, 2mm height magnet: 4 Assembly: Prepare all parts. PLA is fine for all parts, but i suggest PETG for the "slider latch" which has flexing pins. Print with 4+ walls and 30%…
Summary This desktop orrery accurately simulates several elements of the Earth, Moon, Sun system. More specifically: For every 27.43 rotations of the Earth, the Moon completes one rotation The Earth is properly inclined at a ~23° angle…
a fan cover for 120mm fans, with directional slots
The control knob always seems to me to go in the wrong direction. This reminds me which way is which. Print instructions I printed at .01 height.
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
This I made in blender so I can use a PTFE tube for the SV08 for filament input aswell, also I made a bracket what places the filament runout sensor to the place of the filament spool holder. Swap the stock screw of the filament sensor to…
Fully mechanical binary counter that can count up and down. It's modular so you can extend to whatever digit you want. Update 04.07.2024 I modified the bases, connectors, handles and added a lock to the left side to enhance the design…
I have combined the openGrid Bare Directional Snap with the HSW Connector Snap so that the HSW Snap does not first have to be fitted with an HSW Connector (insert-empty) in order to attach a mounting with HSW to the openGrid. For example,…
This allows you to spin nuts in different directions on the same bolt. It’s a very fun fidget toy.
Bi directional pla sampler
Dual 5015 Fan assembly for cooling drone VTX on the bench when FPV drone is connected to battery, to avoid overheating. Powered through switch, and used DC to DC buck converter to keep voltage at 12v regardless of the battery type plugged…
This is a directional nozzle for air humidifiers. Thanks to it, steam comes out in desired direction. Works with these humidifiers: Malatec 16404 Powermat PM-NPO-4W Caruzzo ULTRASONIC-JS1802 Recommended print settings layer height: 0.1 mm…
A servo horn that allows endless rotations by moving back and forth (only one direction) - fine ratchet as only two mesh
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
Useful for washing down the inside of pipes, for example boat trailers. Important: This requires supports around the opening where the water comes out. Gardena version:…
A simple two AA battery pack, with a slide-on optional lid, and two countersunk mounting holes. It uses those little generic square contact tags found on eBay, Amazon, etc, where you get 10 sets for about two pounds. The cover on this…
Used to hang items from string/rope and be able to point them in any direction you want. *Some supports required.
The OEM 8-way restrictor only has positive engagement in the UpLeft, UpRight, DownLeft, and DownRight directions which leaves Up, Down, Left, and Right with a sloppy feel. This gives the joystick positive engagement in all 8 directions.
A nozzle to allow 360 degree coverage of the cutting cool from only one Loc-Line. Solved the problem I had where with only one nozzle, sometimes the cutter of my CNC router or the part geometry would stop the coolant from reaching the…
Turn the Vane 5° for standard sized print bed. Use UV-Stable Material with good abrasive characteristics (e.g. PETG) If you want to use this on a boat Mast, consider that the colour you choose should be seen. Glue together the Base and…
Based on the Z-Axis Knob for Creality Ender 3 by guppyk (great design by the way). I included a direction arrow and text for up or down, just as a visual reference. Two versions are included, one with an up logo & arrow and one with a…
A simple tester to see which direction each color of a Silk PLA print will face. This allows you to know which way to orient your prints to get certain faces to be specific colors Category: 3D Printing
My implementation of a multidirectional stand for the Nintendo Switch, utilizing the joycon rails on the console itself. This design emphasizes simplicity and minimalism. It works in normal (horizontal), vertical and reverse vertical…
