102 models
This is a 10" mini rack mount with optional retention features. You can use the keyholes on the bottom of the device with M3 button cap screws, or the retention clip with a M2x8 button cap screw and M2 square nut, or both. Possible future…
This model uses square nuts in the bottom for 3m screws. Nothing fancy, I made it for my truck and haven't made a bracket to mount it to yet. Make sure to print two of the bracket supports. I made this out of petg to be left in the car,…
Normally the Bose Soundlink Micro lies flat on the table or strapped to something. This stand is for either to stand vertically as in picture or mounted to a wall e.g. in your workshop! Straight forward to print. 0.20 with 15% infill.…
This is a mount for the Bose Soundlink Flex bluetooth speaker. I wanted to attach it to my electric golf trolley - the MGI Navigator Ai. So I created the bracket for the speaker along with parts to attach it to the trolley. If you are…
Create a better listening angle for your Soundlink Mini =)
A wall mount for the Broadlink RM4 Pro but maybe it could work for the Mini version as it uses the same mounting pattern. Two versions, one with the Broadlink upside up and the upside down version. I honestly didn't tested this second one…
Bose Soundlink Flex SE Bluetooth Speaker Wall Mount
Video stand for a smartphone and the Bose Soundlink Mini II speaker. Should be easy to print, minimal support needed.
Require 3 M5 * 20mm to be wall mounted and also for a tigher fit you can add some sticky felt to make it more stable
Ikea Skadis holder for Bose Soundlink Revolve Speaker
This is a bracket to hold a Bose SoundLink Flex Bluetooth speaker on a Peloton bike. I wanted to have an easy method that holds the speaker securely while on the bike, while also being able to take the speaker with me. The rubberized…
I remixed the original model to make room for bigger Screws. Hole Diameter is now 4mm for the screw and 8mm for it's head. I printed in in Aurapol PLA at 0.2mm Layer height. Color “natural”.
The mount hole is for a #8 countersunk head. Mount it to tall wall first and slide the RM4 Mini in place.
There is a recession in the center of the shelf to fit the protrusion in the bottom of the SoundLink that needs supports; print it with the screw holes facing down. I used PETG, but PLA should work fine. The screw holes are sized for…
I own several of these WiFi IR control hubs and have them spread throughout the house. I needed a way to wall mount them, yet still be able to see the indicator light if needed. Micro USB connector on one side (for power) and the…
I wanted to mount the Broadlink RM Mini 3 (IR blaster) that I use with Home Assistant as remote for tv and hi-fi, hidden away under a shelf, so I created this mount. Required screws: 1 x M2*8mm - to tighten the band holding the device 1 x…
Bah tout est dit hein. Adaptateur pour l'encadrement autoradio sur Renault Supercinq, afin d'y poser une enceinte Bose Mini SoundLink. Il y a un trou pour passer des câbles type chargeurs et autres. L'enceinte se mets et se retire,…
Support de BOSE Mini Soundlink mural Fixation à l'aide de 2 vis ou par collage avec du scotch double face
I've used a SoundLink Mini 2 as my main computer speaker for a while. It sounds a lot better with the front tipped up toward your ears, and I kept propping it up with whatever was on my desk. I finally had a few minutes to draw up a…
Ready straight out of the printer. It is a tight fit, so the first time assembling might require a little strength. I used PET-G for the print Let me know if there are issues
This darn joystick is too stiff! Yeah… this will help some. This should work for all Speedlink branded Competition Pro joystick variants. Lift the microswitch plate up from the base, pull off the C-clip from the end of the shaft, and…
A 19" 1U rack mount for the DGS-108 switch from DLink. Both parts are screwed together with a screw and nut. I used M3 bolt and nut. Glue is not needed. It is best printed in PETG or a more stable material, as suggested by the original. I…
My design of IKEA Skadis holder for BroadLink RM mini 3 IR gateway. Cable insert is on right back side. This item is inspired by IKEA SKADIS Collection by CSD_Salzburg, it uses the same hook system (I included the hook). Check out the…
It would be great if I can mount the Broadlink RM4 Mini to the USB charger and let it hang from the wall socket. That's what led me to design this attachment. The slot for the USB charger measures 49 x 27.5mm (internally) and it should…
This is my take on a Broadlink holder. I knocked it up, very quickly, this morning, after my previous holder (by MNGNZ - thing: 2243225) broke. It was the third copy of his design that I'd printed, and they all broke in the same place. So…
This attachment is for securing the Broadlink HTS2 temperature and humidity sensor to the Broadlink RM4 Mini. It allows the sensor to be “floating” in the air above/ around the RM4 Mini instead of resting on surfaces, allowing it to…
This is a custom wall mount for the Broadlink RM Mini. There are no screw holes since the idea is to use double sided tape. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,28 Infill: 15…
When sailing, I listen to music through a waterproof Bose Soundlink Flex. I was tired of it moving all over the boat so I created an open-front box mount with drainage holes in the bottom to hold it. Printed in PETG. Mounted on the aft…
LaskaKit SoundLink Mini Bluetooth Reproduktor Kit V2 Vylepšený, Face and Back mají novou verzi. Jiný vypínač a DC konektor. Ukážu vám, jak postavit klon toho nejslavnějšího a nejlépe znějícího ve třídě Bose Soundlink mini. Poslední čtyři…
CurvedLinks were developed for quick turn-around proof-of-concept prototyping of developable mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercial components from the LEGO Group, a wide range of developable…
Here is a traditional feeling chess set, having been very much based on Dubrovnik, Staunton and Fischer designs. However, it makes a few subtle adjustments. Overall size ratios are adjusted to be a mix of Dubrovnik's wide bases and…
A Skandis Module for Bose Soundlink Color. Designed with enough space from back so it can be charged while in there.
Soundlink Mini Holder for Honeycomb Storage Wall (HSW) Fits Soundlink Mini 1 & Soundlink Mini 2 Print Orientation: as in the file Material: PLA+ Support: yes (organic / tree support) Perimeter: 6 Infill: 15% Update 03.12.2024: You can…
CurvedLinks were developed for quick turn-around proof-of-concept prototyping of developable mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercial components from the LEGO Group, a wide range of developable…
CurvedLinks were developed for quick turn-around proof-of-concept prototyping of developable mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercial components from the LEGO Group, a wide range of developable…
Pole for mounting Dlink cameras on a ground spear. Specifically made for the DCS-8635LH, but should work with DCS-8627LH and other models as well. Features a compartment for the cable connectors and a hollow pole to pass the cable towards…
A simple wall mount bracket for the 5 port ethernet switch DES-105 by DLink. It should fit other devices with keyhole shaped wallmount mechanism and 58mm pitch for 3mm (or less) studs). I suggest printing at 100% infill to increase the…
this wheel breaks a lot Repair Video: https://www.youtube.com/watch?v=F5caiNtt6X4 i havent printed it yet, the FreeCAD Model is available as well 2023-05-18 i printed it, with the uploaded gcode. The Hexagon needed a bit of filing and the…
This is an internal replacement for the joystick. It makes the spring less compacted, resulting in less stiff joystick. The white part in the photo is what you have to replace.
Will report back with a usage report - So far all seems solid enough and loud enough at low speed. When the rev's are up the exhaust takes over anyway!
CurvedLinks were developed for quick turn-around proof-of-concept prototyping of developable mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercial components from the LEGO Group, a wide range of developable…
BroadLink RM3 mount using a small poster Command Strip around the USB cable. Not recommended for applications where USB connection will be stressed. Opening in mount sized for the original RM3 USB cable (7mm x 10mm), may work for others…
Need to print 4 of these for each endlink. Already oriented for best results. Print with FDM TPU Should be the equivalent of their old “Seals-It” seals (part no. WS10MM6PK) Have been using for 2yrs with no issues at all
The piece that holds my KDLINKS X1 dash cam to the suction cup mount had broke and my camera fell. Designed this as a replacement part. I have included the Fusion 360 file, along with several other formats that will allow you to customize…
GridLink-Chess : A modified subest of the GridLink system , for a traditional 2.25 inch square cornice edged chessboard that meets the requirements of the Fédération Internationale des Échecs (International Chess Federation) for…
No supports need Stand for Ikea Bed.
This model can be printed with the largest side facing down, or if space is tight on the print bed, it can be printed with the HSW peg at the top, without requiring supports on most modern printers. Note: The photos were taken of a (now…
Print Settings: Printer brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 1.8 Infill: 25% Filament brand: Hatchbox Filament color: Red Filament material: PETG
Designed this mount to add my Bose Soundlink speaker to my golf Trolley. Printed in PETG at .030 layers height. This should be printed on end (vertically) with organic supports and a brim to insure strength. You will need 2 - M5 x 12mm…
6 walls and top/bottom 25% honeycomb, 8x3mm bolts required to mount + rack hardware
Replacement stand / foot for a SPEEDLINK PARTHICA Keyboard
This camera cover prints in three parts, the window is 50mmx1,7mm plexi/acrylic and the screws are 6 M3 screws that are 7-10mm long. Use small amount of CA glue/super glue to mount the upper and lower part. Remember to use UV stable…
I printed this with PLA, flat side of the bracket down on the printer plate. The locking mount feature of the RM4 pro already had a good fit from the original 3D file. Two screw holes provided.
I'm using my RM4 Mini to control a humidifier, but the IR command that turns it on also turns on another a device that's within range. To solve the problem, I designed a cover that limits the field of view and only allows the RM4 Mini to…
The charger used is a MST3K-EU AC Adapter. No assembly required. If you want the cable to face the opposite direction just mirror the part in the x axis.
Hello Good People!! I have created this speak mount to use with the Festool Multifunction Table MFT 3 . This mount is specific for mounting the Bose SoundLink Revolve speaker. The mount will have a snug fit to the base of the speaker and…
The 50 x 12 size sits at the sweet spot of structure vs. cost, being thick enough for real work yet thin enough to get a lot out of a roll of filament. Additionally, some filaments (ABS in particular) are very good insulators. So printing…
A 3x5 Gridfiniy block to hold the original Bose Soundlink Mini. There is a space for the speaker, the charging base, the charging adapter, and the included charging cable. This was printed using Polymaker Panchroma Matte PLA Filament in…
This model extends/modifies GridLink to create the largest FIDE compliant chessboard via tight fitting hidden jigsaw-style connections. The result magnetically fastens from four parts for ease of travel. It has the thickness, weight and…
This is a printable foot for the old Speedlink keyboard SL-6474-SSV. What is meant is the fold-out plastic part to be able to put the keyboard at an angle. German: Dies ist ein druckbarer Fuß für die alte Speedlink-Tastatur SL-6474-SSV.…
Build instructions and instructions are excellent at original curvedlinks models. Onshape model for further excitement available at…
Support for inserting a 10x2 magnet into the base of the Broadlink RM4 Mini. The hole is narrow enough to be inserted by simply pressing it in, but adding a drop of glue is recommended printed in filoalfa petg with 4 walls
I use this simple bracket to mount my Broadlink RM3 behind my TV. My wall bracket has a nice nook where I can just slide in from the side and it holds it securely. The bracket will hold it upside down (by the USB connector) or right-side…
Warme Nächte im Dachzelt und alle Seiten offen? Ging mir auch so. Hatte einen USB-Lüfter rumliegen und schnell was zusammengehauen. Der Lüfter (SPEEDLINK TORNADO METAL XXL) kann so an einen der drei Mittelstreben im Vickywood Small Willow…
This is the first model I've ever uploaded as I couldn't find a bracket online for this model of router. The base is a little thicker than it probably needs to be but that's mainly to countersink the screws properly and still have some…
The GO-SW-5E is designed with user-friendly, auto-sensing 10/100 Mbps Ethernet ports. Each port has an LED indicator to easily show the link status and activity level, making it a great choice for FRC robotics. Additionally, this model…
GridLink Play,™ is the easiest to use series in the world of GridLink, and is a great tactile art toy for learning and color exploration. With 40 x 4mm base tiles with visible jigsaw connectors and rounded edges and corners, tolerance is…
This support will allow you to place the Broadlink RM4 Mini remote on the IKEA Skadis panel. This support required the original wall mount of Broadlink RM4 mini
Wanted to mount my Dlink -DIR-810 to the wall. So I made a bracket Category: Computer
I added outer support braces so the stand could also handle your table as well as your phone.
This model extends the GridLink Genesis ™ system with edge parts sized to allow matching the Voron 2.4, 350mm panel mounting specification. I ran out of filament about 2mm from complete on my last batch, so 4 of the pieces shown in the…
dlink go-sw-5ge 5 port mini switch 1u 10inch rack mount Found this super tiny 5port Ethernet switch at a thrift store. Had to add it to my mini rack. This is a 1u rack that holds the switch in the center of the rack. It can face forward…
It’s a scroll wheel for the Speedlink Piavo Pro mouse. Mine broke, and I couldn’t find an existing model, so I created one myself. It’s non-standard and has a groove. Maybe it will be useful to someone. Printed in PLA with supports.…
Same size as the original cushions. Printed with TPU Hole Diameter: 4mm
This fan-art, inspired by Minecraft's Creeper, is curated from GridLink Art (GLH4006-100), and demonstrates the kind of wall-hangable pixel-art that can easily be built from that system. The same sort of thing could be done with different…
TPU, 100% infill Needs 2 per side
I use this to store my controllers under my desk. This way they are easy to reach but out of sight when not in use. They come with little usb bluetooth dongles which can be stored in the same holder. The holder can either be attached with…
Here is a hidden-connector GridLink series designed as a slight step up in challenge, and a huge step up in capability from the simpler GridLink Play Jigsaw Set . The “age 6 to Adult” suggestion is not kidding about the adult part.…
I picked up a Bose SoundLink Micro on the recent PrimeDay for $70 USD (they are normally $100) and needed a hanger for the shower head pipe. Link to Speaker: https://tinyurl.com/y8ltpl74 It's just a quick and dirty hanger design I threw…
Print with little temperature, small Nozzle and a lot of cooling as well as a lot of support and Brim
Tired of playing tug-of-war with your car's dashboard? The OBDLink CX is a fantastic tool, but let’s be honest—extracting it from those deeply recessed, narrow OBD2 ports can be an absolute nightmare for your fingertips. Say goodbye to…
I designed this custom drop-in holster to mount a Bose SoundLink Revolve speaker directly to my Super73 RX. If you want to listen to music while riding and need a mount that can handle high speeds, heavy bumps, and vibrations, this is it.…
GridLink tiles are friction-fit. If ideally printed, they get stuck pretty well. This is a set of tools to force them back apart for reuse, etc. Relates to https://www.printables.com/model/1305626 . SUPPORTING YOUR FAVORITE DESIGNERS: The…
I have a Tudor North Flag watch. The bracelet is fine, but I like nylon nato straps. The North Flag's integrated bracelet design has a 12mm connector -- way too small for a strap. So, I created this minimal adapter that allows a watch…
A small case for the Speedlink SL-8850 Vigo external USB soundcard.
This is just another way to hookup that Broadlink IR transmitter to a pole light that usually are sold on IKEA stores, the pole diameter is about 15.7 mm, so u can adjust at your wish. No need supports cause its printed flat down , i…
GridLink Genesis ™ is based on a 60mm square, 20mm thick (6020) base tile. It is the most structural, strongest and most insulating of GridLink series. At the 5012 or 6020 level, GridLink is more than capable of serving the same purpose…
I needed something to hold my RMs under my lounge with a bit of reach out
I have created this case for the DLink DWR-U2000 Mobile WiFi to have the device have a bit of protective shell.
You can mount your device on heating system pipe by with obły one zip tie.
Same steps as original, just modified to be parametrized using fusion 360. Just Open it in fusion 360, in the solid tab pick the upper MODIFY menu, and select change parameters and then modify as needed.
Mount your Bose speaker charging dock to multiboard. Channel in the back for the USB cable to route through. Keep the cables tucked away behind your multiboard grid I used tree support for the cable channel, threshold angle 20 degrees…
Bose Soundlink Flex SE Bluetooth Speaker Wall Mount
A 19" 1U rack mount for the DGS-108 switch from DLink. Both parts are screwed together with a screw and nut. I used M3 bolt and nut. Glue is not needed. It is best printed in PETG or a more stable material, as suggested by the original. I…
I have created this case for the DLink DWR-U2000 Mobile WiFi to have the device have a bit of protective shell.
It’s a scroll wheel for the Speedlink Piavo Pro mouse. Mine broke, and I couldn’t find an existing model, so I created one myself. It’s non-standard and has a groove. Maybe it will be useful to someone. Printed in PLA with supports.…
Tired of playing tug-of-war with your car's dashboard? The OBDLink CX is a fantastic tool, but let’s be honest—extracting it from those deeply recessed, narrow OBD2 ports can be an absolute nightmare for your fingertips. Say goodbye to…
I printed this with PLA, flat side of the bracket down on the printer plate. The locking mount feature of the RM4 pro already had a good fit from the original 3D file. Two screw holes provided.
I designed this custom drop-in holster to mount a Bose SoundLink Revolve speaker directly to my Super73 RX. If you want to listen to music while riding and need a mount that can handle high speeds, heavy bumps, and vibrations, this is it.…
![Ethernet Switch Wall Mount Bracket [DLink DES-105; 58mm Pitch, 3mm Studs]](https://media.printables.com/media/prints/965266/images/7368773_9f3a375d-0abe-483c-aee3-1007395699b5_1f7720b6-4ec1-4b0a-8be6-f8c71b1bc2df/des-105_wallmount_1.jpg)
