4,511 models
Here is a nice quick print based on a request from @aRoguegumsheild for his #BigBenchyBlowout a small fun stand to display a Benchy. I hope you enjoy. Thanks Bugman If you like what I am doing please consider buying me a coffee or…
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
I designed this mount so there is no risk of the dock and the switch to fall to the floor by a light tug on a cable. The hinge on the back of the Nintendo switch dock lock into place with the slots in the printed wall mount. To mount the…
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
A modern take on iconic Plague Doctor mask. Print instructions Fits snuggly into 250x210x210 build volume of Original Prusa i3 MK3 in one piece. Alternatively, you can print three separate pieces and glue them together. Single piece needs…
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
Simple to build PS5 controller charging dock that only needs 2 USB C cables and 4 M4 screws, built in fusion 360, easy print that doesn't need support material and simple to follow instructions, compact and elegant design that will look…
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Nothing/CMF watch 2 Pro charging dock/stand
- The perfect magsafe charging dock for your iPhone - simple design, two Parts, four options for angle and tilt. - Easy to print (no supports) and easy to assemble. Just click in your magsafe charging port. Print Settings · model in…
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
After downloading and printing an airpods/watch dock from thingiverse, I recognized that the hole for the watch charger was to big. so i decide to designed one from scratch and decided to share the fusion 360 file so everybody can…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
The model is made up of two peices. You will need to put the original 8bitdo cable in to the “Back”-part and obtionally, you can slide in two AA-batteries to add weight to the dock. Afterwards, you can slide on the “Front”-part to…
A caricature of a Cyberman from Doctor Who Update: I have added a multicolor version for AMS, however this is untested as I don't have an AMS to test it out. If you do try printing this model let me know how it went.. Thank you.
A caricature of a scary Weeping Angel from Doctor Who
If you have a Dell laptop with a USB-C Dock connector you need this! These connectors are flimsy - putting things around or near the cable that rest on them and put any downward pressure will bend it down and eventually destroy the USB-C…
This is wall mount for the HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink. See link for more details on the dock. https://www8.hp.com/h20195/v2/GetPDF.aspx/4AA7-5549ENW.pdf Printed in PETG, no supports required.
Why it's so awesome? It weighs >400g after being filled with some cement! One hand operations unlocked! A bonus groove for slotting in some flexible fillament to make the base extra grippy ! Print settings (Stand.stl) Settings Value Layer…
A document holder, curved tabs for holding loose paper without it falling over. Declutter your workspace without the size or desktop footprint of the usual staples offerings.
Doctor Who in a box - tenth doctor This is one of my ‘in a box’ series. Perfect as a gift for enthusiasts. The pieces inside the box can be clicked together to create an ornament. Printed support-free Print the logo at a small layer…
When charging my Apple Watch in the office, the watch unfortunately always hung down, which is not great for the charging cable in the long run. I have therefore constructed this Apple Watch stand for the Apple Charger in 10 minutes, so…
The ASUS ROG Ally is a bit too thick to fit securely in a Steam Deck Docking Station. This adapter fits around dock, so that it has a larger front edge to comfortably hold on to the ROG Ally. A Steam Deck will still fit into the dock as…
A caricature of Peter Capaldi as the 12th Doctor Update: Added a multi color version for those with a Bambu AMS or two. This is an untested version as I don't currently have an AMS system. Bambu-A1-Multi-Color-12th-Doctor.3mf is the file…
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
I love the Analogue Pocket and its dock. However, the dock has an annoying design flaw. The dock's USB-C plug is slightly taller than the recess it sticks out of. These guide rails (ugly, but functional) make it much easier to line up the…
A caricature of an Ice Warrior from Doctor Who Update: Added multicolor version for AMS/MMS. Untested!
There are TWO versions of this one in the model section: Wired version, slide in and connect to a general usb c plug. I made this for a generic usb c plug, but they are different thickness so you might need to adjust the height of the USB…
I made this model to keep my CalDigit TS3 Plus and a G-Drive SSD tidily on my desk. Prior to this they were leaning on each other and liable to be pulled over etc. Simple print, no supports required, prints in 2 hours, looks great in…
A caricature of Elisabeth Sladen as Sarah Jayne Smith from Doctor Who (the 3rd doctor)
The car have been designed by Captain JimiPie. Please refer to this Thingiverse site https://www.thingiverse.com/thing:5547978/files. Thanks Captain JimiPIe for this very nice model. I only designed carpets and motor ventilation slots to…
Description Steam Deck dock for Alza Power 5 in 1 USB C Hub. Dock + Lids in separate files. USB Hub parameters: 105mm x 34mm x 11.5mm (LxWxH) https://www.alza.cz/alzapower-usb-c-dock-station-5v1-cerny-d6592232.htm Print settings: Printed…
This is a variation of the Mobius Kaleidocycle. The changes are as follows メビウスカレイドサイクルのバリエーションです。変更点は以下のとおりです。 The distance between the hinges has been reduced to 22 mm by improving the shape. The length of the hinge is 50 mm, whereas…
The Amazfit Bip 6 uses a small magnetic USB-C charging adapter that clips onto the back of the watch. Unfortunately the magnet is fairly weak, so the charger can easily shift if the watch moves or if the cable pulls slightly on the…
EN: This is a dock I have designed for our ABC Design Stroller “Salsa 4” or better said for the carrycot that is part of the set. I wanted to build a table for the living room with the docks attached on the top to easily use the carrycot…
A simple dock to charge your Arizer Solo II in. The Solo II can be slid into the dock from the front onto the charging plug.
This is another version of the already available: PRUSA Filament Guide for mk4 and mk3.9 with dock for Plier's Why another one? First and foremost, I would like to thank Ian McCallister for suggesting the concept. Thank you, Ian! Despite…
I needed a laptop stand with three slots: one for a Dell power brick, a Dell WD22TB4 docking station, and the last slot for a Dell laptop. Printed several of these for my “workstation image bench” to tidy things up and allow for more…
Under table cradle for Dell WD15 docking station - we needed a way to mount it near the cable opening in the meeting room so that the cable is maximally long. This screws in right beside it with easy access to the plugs for cables. Use…
Portafilter Skadis Dock Before getting started, I’d like to thank @ThatCoffeeNerd for their help and the picture. The Portafilter Skadis Holder is a mount designed to easily attach a portafilter (58mm) to an IKEA Skadis pegboard. Ideal…
First time modelling anything. Might as well do a remix/remake charging dock for the Uwell Caliburn. Still a work in progress, as currently the only way to keep it upright on a desk is with blue-tack. Future ideas include a slight space…
Got a Roomba s9+ with the tab that moves the bag tube broken. You can not purchase this part and finding a used replacement is VERY hard, SO I designed this two piece fix for the tube tab. printed in PETG with 100% infill 4 perimeters and…
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
LensDock 3 is a modular three-lens stand designed around one simple idea: one universal base, interchangeable inserts for different lens mounts. Instead of making a separate stand for every camera system, the stand uses three identical…
A decorative organiser that can be attached directly to the robot hoover's docking station. As you might have guessed: our robot is called Rocki ;) The organiser was printed in one colour and then painted. Model vacuum robot: Roborock…
Hi all, Thanks for downloading this bathroom organizer. The model is simple printing-wise, just one part so no assembly is required. The printer settings are still a work in progress I'll update them in the future. Best orientation for…
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional Fits FCC ID SHKASCEHB9
Elegant charging stand with a sleek design. The power cable can be easily clipped into place for a clean and practical setup.
Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry). Tolerances were made for printing at 0.3mm layer height. IMPORTANT! Print the top…
I really liked this model and there was a suggestion to create a 45 version of it so I made this. Print with the 45 degree side down. It requires no supports. Happy Printing! Edit 10.6.24: Added an M5 nut for the back of the Dock plate…
USB gadget für den Schreibtisch
Este es un "remix" del diseño de Doremus, lo que he hecho ha sido adaptarlo para poder ponerle un ventilador en la parte de atrás del dock de Nintendo Switch sin tener que romper el original. Esta diseñado para un ventilador de 80mm que…
While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…
This adapter keeps the USB type A Dongle from LedLenser standing steady on the table, turning it into a convenient charging dock. Confirmed working with the P5R Core and P7R Core , but should work with diameters up to 30mm. Let me know if…
Replacement push button for the Icy Dock MB982SP-1S 2.5" to 3.5" hard disk adapter cage. The original part is made of fairly brittle plastic, and due to the heavy swinging door often hitting it with force in a particularly nasty way, the…
Designed to fit Plexgear Multiadapter USB-C with 9 connections.
Overview This custom-designed charging dock combines function and minimalist aesthetics, tailored specifically for Apple MagSafe-compatible iPhones and the Garmin Fenix 7/8 smartwatch. The dock consists of two interlocking base…
I deliver print with PETG at 240 degrees, without supports, on a 90 degree grain plate and with a print fan.
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional After printing, the charger cable presses into this part. It takes some force, but this…
Čtečka čipů pro docházku žáků a následné automatické zapsání nepřítomnosti do systému Bakaláři
I leave this dock on my desk most of the time but I don't have the Pocket in it. I created this adapter so I can use it for my phone, small tablet or alternative handheld gaming devices. I printed using PLA at .20mm layer height. I know…
Porta Sapone, Spugna, Shampoo, qualsiasi cosa per tenere in ordine la propria vasca da bagno o doccia. Enjoy !
100x160mm sign, reading “Doctor of Hard Knocks”, with art of a mortarboard hat and rolled scroll diploma Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox…
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
Original piece of plastic keep broking and you can only buy new full shower kit. So I made this little plastic spare part! :-)
I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…
A stand with a cutout for the charging puck(?) that comes with the Carbinox X-Ranger Watch (https://shopcarbinox.com/products/carbinox-x-ranger), designed to be printed with minimal supports while still allowing for the watch strap to sit…
Passgenaues, akustisch optimiertes Schutzgitter im Waben-Design (Honeycomb) für quadratische Lautsprecher-Chassis mit 66 mm Kantenmaß. Ursprünglich für die Treiber aus dem Dockin D Mate konstruiert, eignet sich die Blende für alle…
Cerniera di ricambio per box doccia compatibile con sistema Novellini R04PET. Questo componente è progettato per il ripristino o la sostituzione delle cerniere originali nei box doccia e sopravasca delle serie Aurora e Peter. Il modello…
This is still work in progress. I make this for my Prusa XL as a dock for my DryBoxes supporting the RFID reader from the Project SpoolSense.org This enclosure is part of the SpoolSense ecosystem – an open-source project for tracking…
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…
Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL PREMIUM STL File for 3D Printing Follow me>>>: All My Designs: https://linktr.ee/3dprintmodelstore You can support my design work by joining my patreon at here:…
Added a free-stand base and side frames to four of those modules. Makes a nice display for available filaments and colors. The whole construction came out very stable, but to stay on the safe side I added a bunch of M6 nuts in the base to…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Crystal Switch Dock Platform
A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…
Looking for the perfect gift for a doctor, nurse, or medical student? This pen holder, shaped like a doctor's bust complete with a lab coat and stethoscope, is the ideal desk accessory to add a touch of professionalism and charm to any…
Subscribe Now! Very good model from basti_vapes. Remix to no support free and printed. Time-lapse print video : https://youtu.be/MKl_LkOERvs Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
This 3D-printed pen holder is designed as a stylized doctor’s lab coat , featuring clean folds, front pockets, and medical details like the stethoscope and name badge . A minimal yet characterful desk organizer, perfect for doctors,…
This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…
The Steam Controller needs a dock, this our my take on it. It is extremely close to the version we will release in June, except for three things: It lacks the weight to properly stay in place while removing the controller from the magnet…
Update V1.01 : - Very tiny cosmetic adjustment, Removed the small rounded side edges on the front face as they didn't quite look right to me. It has not effect on the controler or puck fit and is purely to just make it look that tiny bit…
This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
Introduction This is an under-desk laptop dock with an integrated ejection mechanism. Slide your laptop on the rails and plug it automatically to a Thunderbolt cable for power delivery and screen and peripheral connections. And when you…
This design is based on konseben's original design, that was working fine, but i wanted to fine tune it a bit. Print it with at least petg, as pla will melt there under load. here are the changes that i made: made it 0.18mm longer(35.62mm…
If you print at 0.2 layer height, you'll get the same pattern as in the pictures. Below 0.2, the pattern changes, and at
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
My take at a dock/display stand for the Steam Deck. The back logo is intended for adhesive rubber cut in shaped of the logo for added grip but that has proved unnecessary with testing. I have included the logo to be printed as an insert…
My sister and I came up with this design to hold her documents and papers vertically, in order to save some space on her desk and keep it tidy. The holder has four slots, each one being 10 mm wide. We also added a small tray on one side…
This is a remix of Scott Yu-Jan's iPhone Dock, adjusted for iPhone 12 Mini. For original design: https://makerworld.com/en/models/615378#profileId-538769 Special thanks to @jlf_cleaner_1966931 for the cover photo!
This is a Remix of the iPhone Standby Mode Dock by Scott Yu-Jan . I have changed the dimensions so that an iPhone 13 with a case fits (152x78mm). At the top, there’s a slot for an Apple Watch charger, allowing you to charge your AirPods.…
Update: 26.07.2024 Added “cmf watch pro 2 stand 0,2mm” with a slightly larger opening for the connector. A charging Dock/Stand for the cmf watch pro 2 Printed at 0.2mm layer height in PLA. Tree supports used for overhangs. Not sure, if…
