Search results: dragonfly

Sort order

228 models

P
PrintablesNina Máčová

Stencil: Dragonfly

Stencil: Dragonfly

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
22
Rating
0
P
PrintablesDan Rogers

Raymarine Dragonfly 4 Transducer - Scotty Mount for small boat

This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…

Print approx. €6.93–€8.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
6
Rating
0
P
PrintablesColin

Dragonfly / Skipper Hydrofoil

For Joysways Dragonfly /HK Skipper. This is glued into the bottom of the hull with the back aligned with the step. The actual foil can be clipped in and out, and is held in with two 4M dome head cap screws. There is a hole in from the…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
5
Rating
0
P
Printablessoozafone

Voronoi Dragonfly

The Voronoi patterns flash contest immediately made me think of insect wings, and so this dragonfly was born. This snap-fit model features posable ball-jointed wings and an elegant display stand. Print Settings Print files are divided…

Downloads
4,856
Likes
1,384
Rating
4.86
P
PrintablesProgrammaDan

Dragonfly FPV Drone

ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…

Downloads
4,464
Likes
1,002
Rating
5
P
PrintablesCram6

Dummy 13 Dragonfly Wings

this pack add dragon fly wings on your dummy 13 figurine

Downloads
2,788
Likes
680
Rating
5
P
PrintablesMikek

Dragonfly Pendant

This is a dragonfly pendant that I designed. It was done with a Celtic style weave in the wings and tail. I printed with a couple of filament swaps to make the weave detail more prominent, and used silk PLA to catch some extra light. Enjoy.

Downloads
2,771
Likes
444
Rating
4.92
P
Printablescrashdebug

Floppy Dragonfly

I wanted to create a dragonfly model since my daughter and I found a dead dragonfly this summer. The overall proportions are based on the one we found. I tried to create a pattern for the wings which is similar to the real thing but with…

Downloads
2,104
Likes
213
Rating
4.94
P
Printables3Demon

Dragonfly Kit Card

This is a digital 3D printable kit card of Dragonfly! Kit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combines the concept of a postcard with the joy of 3D printing.…

Downloads
2,087
Likes
514
Rating
5
P
PrintablesSpike Mix

Dragonfly kit card 3D puzzle

Once you print the sheet you have to break the thin tabs that hold them together and then you can assemble them as a puzzle. If you need a cheat to figure out how to put the pieces together correctly you can watch the assembly animation.…

Downloads
1,683
Likes
311
Rating
4.55
P
PrintablesKiTsuki_791

Dummy 13 Dragonfly

As I created the Lucky 13 version I was asked if I could add a version for the Dummy 13 so here it is! No supports required.

Downloads
1,390
Likes
318
Rating
5
P
PrintablesRESTLESS DESIGN

Dragonfly Gift Card Toy

Designed for injection molding, but you can 3D print it too :) Use 0.15mm or 0.10mm layer height, since the model is 1.5mm tall/thick. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress…

Downloads
1,191
Likes
244
Rating
4.88
P
PrintablesGigiGipo

Dragonfly Earrings

Dragonfly Earrings 0.10mm DETAIL Change color to 1.7mm

Downloads
1,008
Likes
234
Rating
5
P
PrintablesMI175

Dragonfly (Vážka)

PLA Print instructions PLA 0,2mm

Downloads
978
Likes
149
Rating
4.82
P
Printablessylviatrilling

Steampunk Dragonfly

Best at this size, going too small loses detail. Created in ZBrush.

Downloads
963
Likes
209
Rating
4.9
P
PrintablesMW-Mechanical

Dragonfly Mechanical Sculpture (Fully 3DP)

See the following link for video demo. See assembly instructions in photos. Adjust the offset angle between the cams to change the configuration in which the wings flap. Design intended for .4mm nozzle and <.3mm layer height. Use organic…

Downloads
805
Likes
472
Rating
4.93

Dragonfly Wall Art

This is a dragonfly I created in Fusion 360 for a decoration on our fence. I am currently printing them out now, 1st one came out great, on to the second. The print time is around 24 hours when increasing the size by 216.5% on a Creality…

Downloads
782
Likes
174
Rating
5
P
PrintablesHi_Im_Dave

Dragonfly Wall Art

Scale to your liking. Pretty Delicate piece so be careful handling.

Downloads
701
Likes
133
Rating
4.33
P
PrintablesRoland Brandt

Steampunk Dragonfly Figurine

Steampunk Dragonfly Figurine

Downloads
558
Likes
123
Rating
1
P
PrintablesGym Nut Design

Self-defense Keychain – Dragonfly

Can I fly with you on your trips outside of the garden??? Made with love, for everyone who would like to feel a bit safer out there. Printed in golden e-Sun PLA on the Anycubic Kobra 2. I advise setting the infill at 70-100% to give it…

Downloads
557
Likes
136
Rating
5
P
PrintablesBPCS

Cyber Dragonfly (Assembly Required)

New design, assemble your cyber dragonfly, and we recommend using color printing! We have separated the wings, so if you have a multi-color 3D printing system, you can try combining the model for printing. We recommend using a body with a…

Downloads
517
Likes
84
Rating
4.75
P
PrintablesPeter Farell

Dragonfly

Dragonfly with 2 versions if you use the g-code please note that it is using a .2 nozzle. In general, this model works better with a .2 nozzle. Please check your slices before printing with a .4 or above.

Downloads
516
Likes
103
Rating
4.67
P
Printablesprouting

Dragonfly Articulated

Model with or without additional articulated tail Update: Added redesign model and stand version2 To print in place without supports Ball joints: head, wings and tail Include stand Tip: Once printed, to loosen each joint first moves…

Downloads
513
Likes
95
Rating
4.67
P
Printables3DPrintBunny

Dragonfly Artwork

This Dragonfly artwork prints without supports. I would advise printing at 0.3mm layer height. You should be able to see the strings in the slicer preview (in Bambu Studio set wall generator to Arachne). You can achieve the change in…

Downloads
508
Likes
143
Rating
5
P
PrintablesPeter Farell

Dragonfly Bookmark

Dragonfly Bookmark

Downloads
482
Likes
101
Rating
0
P
PrintablesPixups

Coraline Dragonfly Hair Clip

Coraline Dragonfly hair clip base for a Halloween costume a friend was creating for her little sister.

Downloads
479
Likes
47
Rating
0
P
PrintablesTygriCzech

"Dragonfly" 3D Puzzle

3D Puzzle model of “Dragonfly”. Model is made of 28pieces. Original size has each piece width of 2mm. Printing information: PLA or PETG 15% Infill is enough printing time is ~ 9 hours in case of origin size

Downloads
460
Likes
120
Rating
5
P
PrintablesSuturedUser

Realistic dragonfly wings (read description before printing)

This STL works better the larger you print it when slicing. After several tests with my .4mm nozzle the details weren't all visible until 180%. I like to keep X & Y at 180% and leave Z lower ~115% to keep them nice and thin (use .gcode or…

Downloads
433
Likes
70
Rating
0
P
PrintablesPeter Farell

Dragonfly Tamer

Statue Dragonfly tamer by Artec 3D Selective offset (thicken) of wings legs and straps. Removed uneven base and replaced it. Decimated by 90% and minimal surface smoothing.

Downloads
419
Likes
69
Rating
0
P
PrintablesTMShader

Dragonfly Inn - Sign (Gilmore Girls)

Printed with no top and bottom layers and 15% gyroid infill.

Downloads
399
Likes
49
Rating
5
P
PrintablesRott3D

Fishing lure / bait mold dragonfly

Easy printable dragonfly form / mold for fishing Enjoy

Downloads
399
Likes
62
Rating
0
P
Printablesphildesign3d

CR-6 SE/Max 6burner version 5.x (dragonfly)

The 6burner V5 has been developed after several demands for a slimmer case with aligned fans. It can be used only in bowden mode with different hotend installed (stock, microswiss, mellow, primacreator, …) and other like dragonfly. The…

Downloads
398
Likes
54
Rating
5
P
PrintablesPeter Farell

Globe Skimmer Dragonfly

Pantala flavescens, the globe skimmer, globe wanderer or wandering glider, is a wide-ranging dragonfly of the family Libellulidae. This species and Pantala hymenaea, the "spot-winged glider", are the only members of the genus Pantala. It…

Downloads
385
Likes
71
Rating
5
P
Printablesthemacboy

Phaetus DragonFly BMS for EVA v.3 carriage

This is a DragonFly BMS mount (from Phaetus hotend) for EVA v.3, include nuts and inserts versions. NOW for the 6 and 7 fins version, from Phaetus DragonFly BMS. UPDATES: · 2023/05/25 The 7 fins version is about 2mm longer, so I made that…

Downloads
378
Likes
27
Rating
5
P
PrintablesBads

Flying Dragonfly!

Shoutout to Puhsketti for inspiring the flight mechanics! I traced a dragonfly's wings to make this version. I felt like a dragonfly is the perfect addition to the butterflies! Use a lighter to twist the top wings only into a propeller…

Downloads
370
Likes
40
Rating
4.5
P
Printableselite_medo

dragonfly 2D

home decor for stand on your office or wall mount for more models you san visit me on cults https://cults3d.com/en/users/Elite_Medo/3d-models follow me on my ig account https://www.instagram.com/3d.abd.m/ or on my youtube channel for new…

Downloads
365
Likes
33
Rating
5
P
Printablesprouting

Butterfly and Dragonfly silhouette

Butterfly and Dragonfly silhouette Aprox. 100x70mm dragonfly and 75x65mm Butterfly (1mm height). Scale it to your preference. Print setting: 0.2 Layer 20% Infill Not Supports PLA

Downloads
357
Likes
41
Rating
5
P
PrintablesKiTsuki_791

Lucky 13 Dragonfly

I wanted to be able to attach the amazing dragonfly wings created by soozafone and be able to create an insect flyer Lucky 13 a.k.a. Dragonfly 13. So I modified the existing part and added 4 slots to attach the wings. No supports required.

Downloads
346
Likes
141
Rating
5
P
PrintablesEva Máčová

Remix - Dragonfly Bookmark

Original of this model is made by Dariam and it is decoration which you can put in the flower pot.

Downloads
316
Likes
74
Rating
4.33
P
Printablestecnoculebras

Dragonfly on Lotus light box

COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…

Downloads
307
Likes
133
Rating
5
P
PrintablesTommy Zero

OniyanmaKun オニヤンマ君 Dragonfly

Paint the body with oil-based magic marker to make it pretty. You can make the wings with transparent filament such as TPU or PET. You can have fun making it freely with your kids! Mosquitoes consider dragonflies to be their natural…

Downloads
281
Likes
37
Rating
5
P
Printablesiapetus3D

Hair (pin) Ornament dragonfly

Hair Ornament dragonfly remix from Art Nouveau Hair Ornaments Print Settings Printer brand : Creality Printer : CR-10 Mini Rafts : No Support: Yes Resolution : 0.2 Infill : 15-25 Software: Cura 5.2.1 Nozzle: 0.6 Filament brand :…

Downloads
278
Likes
80
Rating
5
P
Printableshumebeam

Icarus - QIDI X-Plus / I-Mate (S) Carriage for Orbiter 1.5 & Dragon / Mosquito / Zodiac x Phaetus & Dragonfly BMS

Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…

Downloads
273
Likes
32
Rating
5
P
PrintablesJoshuanate

Wireless ZA13-c mod with Dragonfly F1 internals using original top shell

ZA13-c wireless mod with Dragonfly F1 internals using original top shell. You only really need two screws and a 3D printer complete this mod. You might have to trim down the battery JST connector a little bit to get the Side button holder…

Downloads
271
Likes
13
Rating
0
P
PrintablesG3D

Balancing dragonfly

Cool balancing dragonfly toy to give as a gift to others… I printed it in: Creality dual colour silk green and yellow pla; Amolen dual colour silk red and blue pla; and Amolen tri coloured silk red, yellow and blue pla. I am also selling…

Downloads
271
Likes
20
Rating
3.5
P
Printablesdymek

Support for plants. Plant Trellis. Dragonfly.

Support for plants. Plant Trellis. Total length 25 cm.

Downloads
261
Likes
58
Rating
0
P
PrintablesChen Heidy

Balance Dragonfly

This dragonfly is a traditional toy, typically made from wood or bamboo. It can balance on your fingertip (or any other

Downloads
260
Likes
28
Rating
5

Dragonfly / Vážka wall decoration

A beautiful minimalist painting of a Dragonfly on the wall. Size 200 x 200 mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15 % Filament: PLA Notes: Top/botton pattern -…

Downloads
260
Likes
42
Rating
5
P
PrintablesGuybrush

Modified dragonfly backpack for Dummy 13 V1.0

Modified the awesome dragonfly wings using the backpack accessory from the Dummy13 V1.0 https://www.printables.com/model/794637-dummy-13-dragonfly @KiTsuki If you want to update your version with this one (or your own take) I'll happily…

Downloads
242
Likes
54
Rating
0
P
Printablesdokurobey

Fan Duct / Ender 3 Pro / Dragonfly Hotend BMS

Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…

Downloads
241
Likes
25
Rating
5
P
Printableshumebeam

Icarus - QIDI X-Max Carriage for Orbiter 1.5 & Dragon / Mosquito / Zodiac x Phaetus & Dragonfly BMS

Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…

Downloads
224
Likes
33
Rating
5
P
PrintablesSpiderpiggie

Winged Horrors – Dragonfly & Skull-Back Dragonfly

This set includes a sleek dragonfly and its twisted counterpart bearing a skull-carapace. Perfect for dark fantasy worlds, creature collections, or tabletop games. These are intended for resin printing, and are not pre-supported. I've…

Downloads
222
Likes
24
Rating
4
P
PrintablesAndy Compton

Phaetus Dragonfly BMO Filametrix Printhead for Voron Stealthburner

Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.

Downloads
211
Likes
29
Rating
5
P
PrintablesMorty_Fire

Bionic Dragonfly Wings - Voronoi with Main Venation for MAVs

A simple test for ultra lightweight and robust bionic wing design for Micro/Unmanned Aerial Vehicles and drones. It's directly printed onto a 0.1mm thick plastic sheet for a wing membrane. This specific venation pattern is that of a…

Downloads
208
Likes
69
Rating
0
P
PrintablesZoroSeerus

VXE VGN Dragonfly R1 Mouse Components + Baseplate for Modding (NOT SE, Pro, Pro Max)

This is a component set for the VXE VGN Dragonfly R1 ( NOT SE, Pro, Pro Max). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is reasonably-well…

Downloads
205
Likes
12
Rating
0
P
Printableshumebeam

Icarus - QIDI X-Max Carriage for Orbiter 2.0 & Dragon / Mosquito / Zodiac x Phaetus & Dragonfly BMS

Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…

Downloads
205
Likes
26
Rating
5
P
PrintablesTanyaAkinora

Rotadraw Dragonfly

Rotadraw is a retro drawing toy, where the children as young as 4 years old can participate. Attach a disc to a piece of paper using the push pin. Mark the dot on the paper next to the Start sign. Locate the hole on the disk near the…

Downloads
197
Likes
38
Rating
5
P
PrintablesGigabeast

Legs for Voronoi Dragonfly

The legs are rather delicate so they're in proportion with the dragonfly. I printed mine at 10mm/s for the 1st layer to really get it nailed down, then 60mm/s is fine for the rest of the layers. I used “initial layer line width” of 100%…

Downloads
193
Likes
29
Rating
5
P
Printablesvidision

Thin Wings for Voronoi Dragonfly

Depending on your filament, settings, and plate type you will get a very different transparent effect. The wings are ambidextrous - either set can go on either side - so you may find you prefer one or the other in order to have the right…

Downloads
190
Likes
31
Rating
5
P
PrintablesPeter Farell

ClubTail Dragonfly

Club Tail Dragonfly

Downloads
190
Likes
20
Rating
5
P

Satsana Ender 3 + Dragonfly BMS + 5015 fan

A Satsana variant that works with Dragonfly BMS and a 5015 fan with the ABL mount removed as i couldnt find any without the ABL so i removed the one from this and thought others might need one aswell. I reccomend printing this with the…

Downloads
179
Likes
11
Rating
0
P
PrintablesDirtClodimus

Phaetus Dragonfly BMS Spacer for Ender 3

I needed to space out the Phaetus BMS hotend a bit on the Ender 3, so the silicon sock would be able to fit onto heatblock while still clearing the bottom wheel mount on the X gantry carriage. This part slips over the hotend standoff…

Downloads
175
Likes
18
Rating
0
P
PrintablesToolmoon

dragonfly lamp

id : sa40011a7 name : dragonfly lamp size : 190 x 155 x 275 mm files : 7 pieces : 7 maximum size of the component : 273 x 85 x 27 mm total print time : 11h:24m raft : yes support : no Applicable Bulb type : tBulb S Instructions :…

Downloads
173
Likes
89
Rating
0
P
Printableshumebeam

Icarus - QIDI X-Plus / I-Mate (S) Carriage for Orbiter 2.0 & Dragon / Mosquito / Zodiac x Phaetus & Dragonfly BMS

Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…

Downloads
168
Likes
19
Rating
0
P
PrintablesCreatedBySynn

Dragonfly Keychain

This is just a simple circular keychain with a cutout of a dragonfly for those who like dragonflies.

Downloads
161
Likes
19
Rating
0
P
PrintablesFevon

EXTRIMO HOTEND Ender 3 v2 phaetus dragonfly bms 2x5015 fans bl touch hotend sherpa mini / bmg

I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…

Downloads
157
Likes
30
Rating
5
P
PrintablesFifthOrb

Zodiac Phaetus BMO Dragonfly Hotend Extruder Parts for Prusa MK3S+

These files will help when converting from the standard E3D Hotend to the Zodiac Phaetus BMO Dragonfly hot end on a Prusa MK3S+. Note this is not for a regular Phaetus BMO Dragonfly due to the addition of an anti-rotation feature near the…

Downloads
152
Likes
18
Rating
4.5
P
PrintablesPolymaker

NT Dragonfly

NT Dragonfly

Downloads
150
Likes
26
Rating
5
P
Printablesvidision

Flexible Tail / Abdomen for Voronoi Dragonfly

UPDATED 26-JAN-2024 The only change was to scale the STL file from CM to MM.

Downloads
148
Likes
43
Rating
4
P
Printablescore3d studio

Voron v0.1 Orbiter 2.0 toolhead integrated klicky mount for Phaetus Dragon / Dragonfly Hotend

It is remixed from Github Klicky-Probe/Printers/Voron/v0/v0_STL at main · jlas1/Klicky-Probe repository and credits goes to them. Any additional guide for installation please refer to the github.

Downloads
139
Likes
20
Rating
0
P
PrintablesNina Máčová

Dragonfly

two colours - wallart, coaster, pendant

Downloads
137
Likes
31
Rating
0
P
PrintablesPeter

Dragonfly BMO hotend without adapter

Dragonfly BMO hotend without collar adapter. The original model didn't have a separate version that didn't have the collar and I couldn't find a model for it, so I modified the step file from Phaetus' website . Included step file and stl.

Downloads
134
Likes
6
Rating
0

Dragonfly charm or keychain

Dragonfly with loop to be used as a charm (necklace, bracelet or earrings) or a keychain

Downloads
131
Likes
23
Rating
5
P
Printablesdragonfly

PETG wingroots and PLA body for voroni dragonfly

I cut the dragonfly body in two parts. Now I printed the wing roots in clear PETG like the wings, and the body in 3 colored PLA. I geot the looks of the PLA and the funktion of the PETG for the wings. printed with 0,15 mm layer and 0,4 mm…

Downloads
130
Likes
14
Rating
5
P
PrintablesMatten79

Raymarine Dragonfly 5 sonar chartplotter mount for Seadoo Spark

Print both parts. Print in PLA or PETG. PETG is the better option. If you print in PLA use high printing temperature for better layer adhesion. Lower part needs supports. You can also paint the parts for better UV protection.

Downloads
121
Likes
3
Rating
0
P
Printablesgleb_sexy

Proportional Wing Scale for Voronoi Dragonfly

Print two pairs, one mirrored along X. You can mirror right in the slicer.

Downloads
117
Likes
13
Rating
5
P
PrintablesCntStrahd

DragonFly

DragonFly - split the wings from the body so they can be printed separately.

Downloads
116
Likes
14
Rating
0
P
Printablesdewcod

Satsana Dragonfly BMS 5015 CrTouch

Remix of satsana to fit dragonfly bms hotend with 5015 cooling fan Fitted for ender 3 pro only as thats what i have….will fit any printer that uses the same x carriage as ender 3 pro probe offsets are: x-53 y-15

Downloads
115
Likes
7
Rating
5
P
Printableshumebeam

Icarus - QIDI X-Max Carriage for Sherpa Mini R1 & Dragon / Mosquito / Zodiac x Phaetus & Dragonfly BMS

Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…

Downloads
113
Likes
20
Rating
0
P
PrintablesZachary3Dprints

Anet ET4 Stock Duct Phaetus Dragonfly

If you want to install the Phaetus Dragonfly hotend, you need a bit different fan duct. For that reason, I have created this one Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution:…

Downloads
112
Likes
2
Rating
0
P
PrintablesWill M

Prusa Mini+ Dragonfly BMO Hotend Mount

I wanted to replace the hotend on my Prusa Mini+, but only had a Dragonfly BMO handy. I can not take credit for creating this remix, as i had Jakub ( https://www.fiverr.com/jakub_junek ) create it for me! and he did a great job.

Downloads
110
Likes
9
Rating
1
P
Printableshumebeam

Icarus - QIDI X-Plus / I-Mate (S) Carriage for Sherpa Mini R1 & Dragon / Mosquito / Zodiac x Phaetus & Dragonfly BMS

Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…

Downloads
109
Likes
17
Rating
0

Ender 3 V2 + Dragonfly BMS + Orbiter V2 + 5015 Radial fans

A printing head for Ender 3/Ender 3 V2 with very good cooling performance. Printing accessories: Dragonfly BMS hotend Orbiter V2 Extruder 5015 24V X2 (part cooling) 4010 12V (hotend) Hardware: M4x20 @4 (5015 fan mounting) M4x10@2 (blower…

Downloads
103
Likes
27
Rating
0
P
PrintablesLowPolyFigures

Low poly dragonfly

Dragonfly with elongated polygonal body and sharp faceted wings.

Downloads
102
Likes
13
Rating
0
P
PrintablesNina Máčová

Wall art: Dragonfly (three colours)

Wall art: Dragonfly (three colours)

Downloads
102
Likes
32
Rating
0
P
Printablesc3rs

Ender 3 Dual 5015 dragonfly or mk8

Liked the look of dadul96'sduct but wanted to run dual fans so cut it in half and mirrored it, also plugged some unused holes, changed the shape to fit around a dragonfly and changed the hole sizes to suit m3 screws too. Works well…

Downloads
99
Likes
14
Rating
4
P
PrintablesMicah

Low Poly Dragonfly

Have fun with this low poly dragonfly! Check out my profile for more low poly animals.

Downloads
98
Likes
10
Rating
5
P
PrintablesGeorgK

Prusa i3mk3s+ dragonfly hotend part cooling fan

Took the original Prusa i3mk3s+ part cooling fan mount and made a better one for Phaetus Dragonfly hotend, now the air will not blow on the silicone sock, but will actually cool the part. It's just a little bit higher.

Downloads
94
Likes
10
Rating
0
P
PrintablesSwede

Creality Cr-6 Dragonfly hotend adaptor

This is an adaptor that lets you use a Pheatus Dragonfly BMS all metal hotend with your Creality Cr-6 printer while keeping the ABL sensor function This is still a work in progress, there are a few things to improve on but I haven't had…

Downloads
94
Likes
17
Rating
4.67

Dragonfly Mosquito Repellent - Hat Clip

Mod of KTX992's MakerWorld model using 1.75mm filament stems; length tunes flexibility for different uses.

Downloads
93
Likes
13
Rating
4

Big Block V8 Blower (Ender 3 V2 + Dragonfly + Orbiter v2)

This is my first blower design for the Ender 3V2. This design is using the Dragonfly BMS hot end, orbiter V2 extruder, and 2x 4010 or 4020 fans on the sides and one 3010 fan on the front. There are now many variations of this, so please…

Downloads
93
Likes
19
Rating
0
P
Printablesb1tshifter

Ender 3 Pro Satsana Dragonfly with stock (4010) blower Remix

A remix of the excellent Satsana fan duct that has been widened a little to allow a Phaetus Dragonfly BMS to fit. There is already Dragonfly version(s) of the Satsana, but they use a 5015 blower, and I wanted to use the much, much quieter…

Downloads
93
Likes
10
Rating
0
P
PrintablesJarrett V

DragonBurner Dragonfly BMS 7 Fin Mount

This mount requires 2 heatset inserts. A huge bonus with using the Dragonfly BMS is you can use 2 M3 SHCS instead of the tiny M2 or M2.5 required by the Dragonfly BMO. I find the BMS side mount with 2 screws is superior to the BMO top…

Downloads
92
Likes
8
Rating
2
P
PrintablesDzyn3D

Phaetus DragonFly 7 fin BMS for EVA v.3 ... #72mod (heat insert version only!)

!!! PLEASE NOTE - THIS MOD IS ONLY FOR THE 7-FIN, HEAT INSERT MODEL !!! Great mod by @themacboy - appreciated and thx for sharing, and ofc not possible without the whole EVA thing going on before that. After the initial install (of std…

Downloads
91
Likes
10
Rating
5
P
PrintablesAndrew Cote

Ender 5 s1 Dragonfly BMS mount

designed for heatset inserts, nozzle should be pretty much in stock location.' Update: If you have issues with prints after using this bracket for a while, check the tightness on the screws used to mount the hotend to this bracket, and…

Downloads
87
Likes
15
Rating
5
P
PrintablesMastaOfPasta

Bugaboo Dragonfly bottle/cup holder

cup/bottle holder for the bugaboo dragonfly stroller. would probably work with any stroller with that round knob on it

Downloads
85
Likes
7
Rating
5
P
PrintablesJake90

RatRig V-Minion reverse Bowden w/PC04-M8 by Phaetus dragonfly BMO

If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO

Downloads
82
Likes
12
Rating
5
P
PrintablesBrynD

Dragonfly HIC Toolhead, Ender 7

No re-wiring required. Ender 7 replacement toolhead with, bowden, or direct drive extruder and Pheatus Dragonfly HIC hotend. Giving a clear view of the nozzle from above, perfect for watching the first print layer going down. Cooling of…

Downloads
82
Likes
15
Rating
0
P
PrintablesMastaOfPasta
Downloads
80
Likes
3
Rating
0
P
PrintablesEllzray

Seneca Dragonfly MK2 .22 Replacement Single Shot Tray, Diana Stormrider

Single shot tray for the Seneca Dragonfly MK2 .22 cal. No magnet, just friction fit. Should fit the Diana Stormrider since they take the same mags, but I don't have one personally to confirm.

Downloads
79
Likes
7
Rating
5