6,407 models
I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for PETGSource material: PET
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Holder for screwdriver (set bought at Gamma)
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.
Print approx. €12.57–€15.37 excl. taxPreliminary estimate for PETGSource material: PET
Organise your pockets with a minimalist EDC bit driver/screwdriver Bit driver with internal storage for 6 standard 1/4" bits. Knurling for grip Option to add 5x2mm magnet to retain the driver bit in use UPDATED 9/2/21: Fixed thread…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
Hi! Let me introduce the whole grid of 2023 Formula 1 World Championship! Now you can show the world who your favourite driver is 🏎 In the files section you will find: stl files with each driver keychain from the list: Red Bull: Max…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
This is a new approach (for me at least) to pegboard holders : pegboard screws. They are intended to be used with a “rail” for use on pegboard with hole spacing of either 25mm or 1 inch. These particular holders replace the screwdriver…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
A holder for 2, 10, 90 screwdriver bits for easy organization and retrieval at a glance; screwdriver bits stay in place without the need for magnets
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Rack to hang Wiha Soft Finish screwdrivers - I have a set of 12: 3 flat - 3.5, 4 & 6.5 2 Pozi - PZ1, PZ2 3 Philips - PH1, PH2, PH3 4 Torx - T15, T20, T25, T30 Sized for these, in that order. The rack is in two parts to accommodate it on…
Print approx. €10.38–€12.69 excl. taxPreliminary estimate for PETGSource material: PET
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for one variant
Simple rack for your screwdrivers. There are two countersunk holes for mounting using small screws (max 7.5mm head, 3.5mm threads). The top hole for each driver is slotted, so you don't have to lift the driver all the way out to remove.…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for PETGSource material: PET
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
Quick and easy mount to hold (and display) your LTT screwdriver. Should provide a snug enough fit so it doesn't fall out but is easy to grab and go. Step file is included if need to make adjustments or use with other wall organizers.
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
Simple holder for Wera electronic screwdrivers.
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for PETGSource material: PET
Hi, This print is comptible with the Küpper workbench and can hold up to 6 screw drivers. It is personalized to my need, but should remain fairly standard for normal other set of screw drivers. You can leave a comments, I am always open…
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET
Remix of original model: https://grabcad.com/library/the-male-figure-carl Changes on model fits to seat of 3Dsets Model 8 Buggster his right leg is shorter, fits to pedals right hand on other position brand new ears less belly fat more…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
Set of 5 commonly used hand use sockets with a box to keep them together in a gig bag for common sizes on guitars, pedals, or amps. Especially for guitar finishes, using these will be better than metal sockets that can scratch the…
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for PETGSource material: PET
The LTT Store screwdriver is fantastic. However, the extra bit storage is not. This modular bit holder is the perfect companion to your LTT screwdriver! This design features several valuable features: Its modular/stackable design allows…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
I wanted a clean, easy-to-use Skadis holder made specifically for the LTT screwdriver — and after trying a bunch of designs online, none quite worked due to the screwdriver’s unique shape. So I made this! The goal: ✅ Minimal enough to…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
This OpenSCAD model is customizable for the number of holes desired on the rack in small, medium, and large. The STL file has 5 holes, and fits diagonally on an Ender-3 S1 bed. I set this as a remix because I took the original as heavy…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to place my Ifixit Mako driver kit to my honeycomb storage wall so I designed this holder.
Print approx. €4.26–€5.20 excl. taxPreliminary estimate for one variant
Remix of KVEL's WERA Screwdriver Holder with improved Bott Perfo Brackets. Print instructions Additional parts required: - 6 x M3 Brass Heat Set Inserts (for Bott Brackets) 1 x M3x8 Socket Cap Hex Machine Screw 2 x M3x10 Socket Cap Hex…
Print approx. €4.33–€5.30 excl. taxPreliminary estimate for PETGSource material: PET
EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Pill Capsule - Keychain EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
NOTE: These pegboard organizers are for US type pegboard: 1 inch spacing between holes 3/16" holes thickness 1/8" to 3/16" (A separate Metric pegboard version is also available.) These are for 7-piece sets of nut drive holders. "Nut drive…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Wall mount for the 20V DCF840 DeWalt Impact Driver. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. See the following link for a similar mount…
Print approx. €6.85–€8.37 excl. taxPreliminary estimate for one variant
Inspired by https://www.printables.com/model/394330-hex-bit-holder-removable
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET
Just another case for the LTT screwdriver. I sliced the model with PrusaSlicer 2.5.0 without adjusting any setting and printed it with the inside of the case facing down. Added a version 2: added 2 pairs of magnets at the latch deepened…
Print approx. €7.12–€8.70 excl. taxPreliminary estimate for one variant
Alsado keychain screwdriver for 1/4 inch bits "Colibri" A keychain screwdriver for 1/4 inch bits, including a bit friction fit and a bit compartment. Key Features bit friction fit prevents 1/4 inch bits falling out big keychain hole that…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Adapted Eltord's LTT Screwdriver Hanger to work with Sy's Peglock. Requires "Board Attachment (Universal)" from “Sy's Peglock - Locking Pegboard System.”
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
A tool rack to hold the Wiha 26491 5-Piece Ball Metric End Hex Driver Set. Meant to be affixed to the front of a 19mm or 3/4" shelf with 2 drywall screws. Print instructions .2mm layer height, 20% infill, PETG or whatever should be fine.…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
I made this oldschool ratchet as a design study to realize a big vintage slot-screwdriver from steel. - I wanted to see what it needs to work properly. To publish a complete design I added a knob (just glue to the mechanism) and a hex…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for PETGSource material: PET
UPGRADED in strength and wall holding power. Original design was too flimsy. Printed in PLA but PETG fine, 0.6 nozzle, 0.3 layer height, no supports needed. Assumes M4 Inserts but M3 Inserts will work also.
Print approx. €6.17–€7.54 excl. taxPreliminary estimate for one variant
A wall mount for the ltt screwdriver so you can show it off while not using it. Best printed on with SLA printer but FDM works fine. Screws used 8.8mm x 2mm head, 4mm thread diameter.
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Hello, Here's a remix from the Wiha small screwdriver holder from Colorfabb on Thingiverse (https://www.thingiverse.com/thing:1487220). The holder is made to hold 6 PicoFinish HEX screwdrivers from Wiha. The original design had two holes…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
A quick remix a this amazing parametrix box, for screwdriver bits storage. You ca add a 10x5x2 magnet to lock the bit holder in place.
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
This part is designed to to hold a piece of foam or other material over the driver to tweak the sound signature. Installation: Press the part carefully on the driver assembly, (glue is not necessary). Printed with Creality Ender 3, using…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
My dad asked me to buy a small screwdriver that could take a standard 6.3mm hexagonal bit, so instead i made one with his request , large base but low height . I'm sharing it since a lot of people where he works wanted one too , hope you…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
This is a horizontal (box) or vertical (wall) mount for a milwaukee drill driver type 2407-20. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
Este soporte para destornilladores Wera, impreso en 3D, ofrece una solución práctica y organizada para almacenar tus herramientas. Diseñado para maximizar el orden y la accesibilidad en tu taller, este estante está hecho con material PLA…
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
EasyBox for 6 EasyDriver 4.4 steppermotor drivers and a Teensy 3.5. Connected to an optical encoder and a hall positioner. Connected to 6 steppenmotors. Used for the electric auto rewind spool system for the MMU2S Print instructions I…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for PETGSource material: PET
Having to act on the potentiometers of my stepper motor drivers, I needed a non-conductive ceramic or plastic screwdriver, so I thought of printing a 4mm bit with a PLA slotted tip. For component strength, print the bit horizontally, with…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Remixed models of Screwdriver Handle to fit my old set of small screwdrivers (good for small terminals etc.) with broken handles. I found original handle model as nice and remixable for my use case. Here are 2 new remixes containing holes…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
A precision watchmaking screwdriver stand designed to organize and store Bergeon® and other similarly styled screwdrivers, ensuring easy access and a tidy workspace. The stand consists of a base, a top face, and two types of screwdriver…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Just for fun, but also functional. Keep your Arrowmax Pencil Screwdriver Kit organized and all together. Add 4 foam pads to the bottom location markers to prevent it from sliding around if desired. That’s it. Use PLA with a .4 nozzle…
Print approx. €5.06–€6.19 excl. taxPreliminary estimate for one variant
Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
To be used with Snap Tool Rack wallmount blocks (STR-001 and STR-001B). Step file also available for easier modification
Print approx. €17.89–€21.87 excl. taxPreliminary estimate for one variant
Case for a set of 7 Hexdrivers. There seem zo be quite a lot of very similar versions of these hexdrivers out there. Case has a snug fit lid and drivers can be easily removed by pushing the tips down into the case.
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey
Print approx. €14.45–€17.66 excl. taxPreliminary estimate for one variant
Wera nutdriver set caddy
Print approx. €11.96–€14.62 excl. taxPreliminary estimate for one variant
distance between pins is 37,2mm Printed in Prusament Galaxy Black PLA you need Supports use 4 Perimeters for strength Pegboard:…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
This is a model to hang 7 screwdrivers. It's a remix of https://www.printables.com/model/57007-elfa-utility-board-wera-micro-drivers-hanger which I found to be an excellent model. My OCD compelled me to do this since all of my mini…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Holds the Racingirl NIDICI Titanium Hexagon Screwdriver Wrench Tool Set or similar. Solidworks and STEP files are included for remixing. The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123 ) and 4 3/8" adhesive…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Bitsholder with a strong clamp that is designed to easily slide onto a belt or pocket edge. The bits holder has room for 10 bits and a slot in the end that can be used as a screw driver. The holder has 3 slots for 9.5x9.5x3 square magnets…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Printed in Prusament PETG Prusa Orange 15% infill .15mm layer height and 6 perimeters with support turned on. Screwdriver bits fit snug, may want to scale up slightly for easier bit swapping. Included bgcode file for Prusa Mini+
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
Attachment for the PAX grid line
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for one variant
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
This is a dr-55 Ratchet Screwdriver for the Ikea skadis pegboard.
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Simple hexbit screwdriver with storage box for 4 hexbits. It is really small but still useful tool. There are 2 versions, normal and less tight. Thight version catch bits strong and no magnet is needed. Less thight version need magnet. I…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I ditched the box my Jakemy screwdriver came in since it's going into my toolbox, but I didn't want the button getting pressed while rolling around, so I printed up this quick little cover to keep the battery from draining. Printed with…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I had a random hex driver and its 32 hex bits laying around so I decided to make a holder for them to make it a bit more tidy. The tolerances are bit wrong so the fit is really really snug for the bits, I have to use pliers to get them…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
These were made to fit both metric and standard versions of the power torque nut drivers. This is my first time designing something so they aren't perfect but they do work. Bin Size 5x1x3 Link for 6X2 magnets:…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Skadis holder for the screwdriver that comes with the Sparx skate sharpener Uses the T-clip system by Line Arc Line
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Logitech Z3 Audiophile Upfire Speaker Upgrade Hauche deinen alten Logitech Z3 Satelliten-Treibern neues Leben ein! Dieses massive, 3D-gedruckte Gehäuse verwandelt die ursprünglichen Plastik-Boxen in hochwertige Upfire-Lautsprecher mit…
Print approx. €12.22–€14.93 excl. taxPreliminary estimate for one variant
Just a quick mini stubby for when you need to get at a screw and have VERY little space to do so. I made this set from a cheap $5 set of 10 1/4" bits from the hardware store. Prints just as it is, and I'd recommend fitting the bits in…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
I scaled the size up to 105%, opened up the USB-C plug channel, and added another inner ring of holes for bits.
Print approx. €8.14–€9.95 excl. taxPreliminary estimate for one variant
Remix for a Bosch Ratcheting Screwdriver (Bit-Ratschenschraubendreher) with 12 bits that attaches to the IKEA Skadis. The through-hole is 10mm in diameter and the body of the mount was stretched in order to accommodate the 40mm diameter…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
A variant of my other screwdriver stand M8 nuts can be inserted as weights Can not find the Fusion360 anymore :-( cheers
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
A driver that fits on the cap of a Fashy warm water bag. To help people with limited grip strength.
Print approx. €3.12–€3.82 excl. taxPreliminary estimate for one variant
This is on demand simple model to replace that horrible alu Wowstick stand. I have used my Wiha, but it seems other brands magnetizers are simple clones so probably compatible with others too. its removable so you could use magnetizer to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
If you’ve ever tried to screw in an L-shaped hook by hand, you know the struggle: slippery grip, sore fingers, and hooks that never sit quite straight. This handy driver fixes that. Just slide the hook into the front slot with the screw…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
A sunvisor clip for the Ooono Co‑Driver No2. Since devices like this are not allowed in some countries, I wanted to make the gadget a bit more discreet. By adding a clear PETG window between the cap and the Co‑Driver, it’s no longer…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
I made Screwdriver Holder bar to hold all of my loose drivers. Purchased from Aldi, they have no way to store or sort. Made from PLA+. 2-3 perimeters and 5% infill should do. Maybe a remix with a hook or mount to keep it on a shelf would…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Compact EDC Screwdriver with Storage A pocket-sized EDC bit driver built for daily convenience. It holds 2 extra bits internally, locks shut with a snappy friction fit, and includes a built-in lanyard hole to easily hook onto your keys,…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…
