Search results: dupont

Sort order

234 models

P
PrintablesRong

Dupont connector bridge

Combine and rearrange single- or multiple-contact Dupont connectors into a same-pitch bridge. Now with multiple row support! The assemblies can be a bit tight, but still much easier to modify than re-populating a dedicated housing. If…

Downloads
3,584
Likes
2,421
Rating
4.97
P
PrintablesGrunt

ESP32-WROOM-32D Dupont Case

This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…

Downloads
2,383
Likes
208
Rating
4.67
P
PrintablesJonas Pedrotti

Dupont Cable Organizer 10 & 20mm with optional Skadis hooks

I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…

Downloads
2,320
Likes
437
Rating
4.77
P

2,3,4,5,6,7,8 Pin Dupont Cover With Improved Hinge

NOTE: Do not print with supports. The model is designed to print without the need for supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 % Thank you @SpiderGod_2164882 & @Chris_Walnut_3378485 for the…

Downloads
2,122
Likes
987
Rating
5
P

Improved 4-Pin Dupont Hinged Cover

NOTE: Do not print with supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 %

Downloads
1,532
Likes
1,342
Rating
5
P
PrintablesMarek123

dupont connector lock

This is dupont connector lock for 1-6 pins . There are variants for 12 and 14mm dupont connector. Initially I used PLA, but the connector is fragile and propably wont withstand reusing. PETG is more suitable , because it is more flexible…

Downloads
1,311
Likes
289
Rating
4.71
P
PrintablesNamida Verasche

Printable XhuPont / XH2.54 / DuPont connectors (V2)

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…

Downloads
1,259
Likes
978
Rating
5
P
PrintablesViosDesigns

Gridfinity Dupont Wire Organizer System

The Dupont Wire Organizer System was created to assist fellow Arduino, raspberry pie, robotics and rc enthusiasts stay better organized. My cables were always tossed into bins and they were a pain to take out, so i created these bins so…

Downloads
1,225
Likes
185
Rating
4.71
P
Printablesgreenribbit

DuPont Wire Organizer - minimalist + small footprint

I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own! This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long…

Downloads
1,069
Likes
354
Rating
4.96
P
PrintablesNERDCORNER

CONNECTORS Edition 3-8 PIn Dupont Jumper-Cable

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
982
Likes
223
Rating
5
P
PrintablesNERDCORNER

CONNECTORS Edition 2-6 Pin Dupont / Jumper-Cable

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
890
Likes
201
Rating
5
P
Printablessobieh

RaspberryPi RPI dupont connector

Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…

Downloads
860
Likes
167
Rating
4.86
P
Printablesjohn3volts3

USB to Dupont adapter for power supply 5V Arduino Raspberry Pi (Remix)

A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…

Downloads
833
Likes
273
Rating
4.71
P
PrintablesMCOOPE18

Dupont Cable Management (Organizer)

Dupont Cable Management. The fins need to be separated after printing. If you optimize this design please tag me. I would love to see improvements.

Downloads
714
Likes
320
Rating
5
P
PrintablesTamiyaGuy

Dupont / Jumper Cable - Male/Female

A simple remix of NERDCORNER 's Dupont cable connector, this now has a male and a female end, allowing you to use two Dupont connectors similar to a micro JST connector or other small electrical connector. The tab and recess arrangement…

Downloads
612
Likes
229
Rating
5
P
PrintablesZeva

AA Battery Holder for DuPont jumper

I was needing a battery holder, and due to my lack of patience to wait 2 days for the order to arrive, it occurred to me to make a very simple model of battery holder that can be used directly with DuPont cables. The model has two small…

Downloads
606
Likes
93
Rating
5
P
PrintablesPeterthinks

Mini Dupont crimper

This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…

Downloads
601
Likes
79
Rating
4.25
P
PrintablesArsence

Gridfinity DuPont Jumper Wire Holder

2025 - Use improvded remix https://www.printables.com/model/1185210-gridfinity-dupont-jumper-wire-holder Gridfinity - 6 Length, 1 Width, 3u High. For 200mm DuPoint wires. Requires four 6x2mm to hold the bridges in place.

Downloads
513
Likes
72
Rating
4.33
P
PrintablesShellytheTurtIe

Stackable dupont/jumper wire holders

All sizes of wire holders are compatible with each other Print instructions - wire holder Choose between 100, 150, and 200 mm long Supports everywhere 0.4 nozzle 0.2 layer height 10% infill, any infill pattern is fine Print instructions -…

Downloads
456
Likes
246
Rating
5
P
PrintablesNERDCORNER

Connector 2PIN LED strip 12mm Dupont

3d printed Connector for jumper wire (Dupont 12mm) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…

Downloads
454
Likes
173
Rating
5
P
PrintablesNERDCORNER

CONNECTORS Edition 2-10 Pin Dupont / Jumper-Cable

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
421
Likes
87
Rating
5
P
Printablesjohn3volts3

USB to Dupont adapter for 5V FEMAL

USB adapter to Dupont "female" version. Be careful to insert the Dupont plugs in the right direction as shown on the pictures. This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Printing is…

Downloads
398
Likes
86
Rating
4.4
P
Printablescaburum

PWM/Dupont Cable Clip

I printed with the open side up. This is a simplified version based on the REV part .

Downloads
378
Likes
21
Rating
5
P
PrintablesMartin_au

Dupont connector clamp/holder

When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and pieces. I made these to hold 4 to 7 dupont connectors together in a little bundle. You'll need a well dialled in printer to…

Downloads
372
Likes
59
Rating
4.5
P
PrintablesNERDCORNER

Connector 4PIN Dupont / Jumperwire

14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
367
Likes
208
Rating
0
P
Printablesjeroenrnl

Gridfinity Dupont Cable Organiser

Fully customisable Gridfinity trays to store your (Dupont) cables. I have been using urish 's Dupont Cable Organizer Customizable for many years now and they are an excellent way to store my breadboard cables. Now, I am switching to…

Downloads
328
Likes
52
Rating
5
P
PrintablesPeterthinks

Dupont Crimper Guillotine

Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…

Downloads
315
Likes
44
Rating
2
P
PrintablesTomVG

Dupont cable organizer

I needed a solution to store my dupont wires, so I quickly modeled these as a solution to my problem. They have served me well! Each holder requires 2 combs to be printed, which are connected with M5 threaded rods cut to length. The…

Downloads
312
Likes
74
Rating
4.75
P
PrintablesNT

Connector housing Dupont/Jumper 4Pin

Realy usefull connector to have a clean way to connect 4 pin dupont/jumper cables. created by Nerd Corner

Downloads
305
Likes
94
Rating
5
P
PrintablesFreestyle_Tech

Parametric Dupont Cable Comb

Parametric Dupont Cable Comb This comb holds Dupont wires in neat, parallel lines so your cable runs look clean and are easier to trace and debug. Designed in Autodesk Fusion and fully parametric. There is one single row version and one…

Downloads
286
Likes
169
Rating
5
P
PrintablesCem0s

Dupont Connector - 4 Stack

Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.

Downloads
280
Likes
88
Rating
0
P
Printablescaltoyuno

Dupont/Jumper Cable/Wire Organizer with optionnal Universal Skadis Hook

Some update from the original. You have 2 versions : one with print all in one but the combs/brush is quite weak one in few part with a combs/brush to mount with strong. (You can reduce the size to 99% to be easier to mount on the base)…

Downloads
271
Likes
44
Rating
4.78
P
PrintablesJonweb

Dupont Connector Holder 4 Pins

Hello, just a remix of Connector housing Dupont 4Pin made by NerdCorner user (thanks for the great job) https://www.thingiverse.com/thing:5233256 ; i remix it in order to my needs, means in my opinion a little bit strong and easy to…

Downloads
237
Likes
45
Rating
0
P
PrintablesSnares

JST to Dupont Adapter for BLTouch (Easy)

I tried several JST adapter models for connecting BLTouch sensor to an Ender 3v2 board. This model prints easy and works great. I believe you could terminate this “properly” but I simply used super glue: >Remove plastic ends from dupont…

Downloads
236
Likes
62
Rating
5
P
PrintablesDaniel

USB to Dupont Adapter

Simple USB to Dupont adapter with positive indicator.

Downloads
233
Likes
43
Rating
5
P
PrintablesCem0s

Dupont Connector - 10 Stack

Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.

Downloads
232
Likes
56
Rating
5
P
PrintablesCem0s

Dupont Connector - 6 Stack

Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.

Downloads
226
Likes
56
Rating
0
P
Printablesorangejarritos

2x AA Battery Holder (DuPont)

Remixed - The model has two small notches on each side, large enough for the DuPont connector to be firmly inserted between each battery pole and the model. The cable may be a little tight and require a little force to insert, but this…

Downloads
222
Likes
27
Rating
5
P
PrintablesNERDCORNER

CONNECTORS Edition 2-8 Pin Dupont / Jumper-Cable

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
221
Likes
64
Rating
5
P
PrintablesJavier Lloret

Dupont RGB Led Connector (PLUG&PLAY)

Connector for dupont cables to rgb led strip (plug&play style) for all those who do not want to solder or do not know :), super easy to print, only use 1g

Downloads
220
Likes
52
Rating
0
P
PrintablesCem0s

Dupont Connector - 8 Stack

Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.

Downloads
218
Likes
49
Rating
0
P
PrintablesGlen Hay

DuPont Jumper Storage

Easy to print, no support required. A quick rub between the fingers with some folded 120 grit sandpaper is all that is required. you can choose from plain ends or those with mounting holes preformed. The stand requires a length of 10 mm…

Downloads
218
Likes
63
Rating
5
P
PrintablesHiro

Hinged Cover for Dupont Connector

This is a hinged cover for interconnecting Dupont connectors (4-pin). It helps prevent the connector from coming off. You can open and close this cover by the hinge, and locking the cover in the opposite part. Note You can print this…

Downloads
215
Likes
51
Rating
4
P
PrintablesMr-J

Dupont 2 Row Male Housing

This is a housing for male inline 2-row Dupont connectors (aka 0.1" / 2.54mm pin headers). It is intended to hold and protect the male side and provide keying to avoid connection in the flipped orientation. There are 2 parts; the housing…

Downloads
203
Likes
56
Rating
5

8 pin dupont connector

this fits an 8 pin dupont connector. was going to be used for a connection on my printer but ended up not working.

Downloads
200
Likes
55
Rating
5
P
Printablesmika.dwsk

Elegoo Dupont jumper cable organizer

Resized to fit Elegoo Dupont cables.

Downloads
196
Likes
18
Rating
5
P
PrintablesOxmstr

Dupont connector 2.54mm pin holder with generator

A simple holder for 2.54mm dupont style connectors. Connector dimensions 2.54×2.54×12mm. If it's too tight, and you are using Cura, try setting horizontal expansion to -0.05mm. The walls thickness (0.8mm) is optimized for 0.4 nozzle.…

Downloads
194
Likes
30
Rating
5
P
PrintablesPiet Wauters

Dupont to JST XH 2.54mm

Easy way to transform your Dupont cables for JST XH 2.54mm sockets. Print in PLA or PETG. No support needed. Freecad file is included.

Downloads
193
Likes
26
Rating
5
P
PrintablesTechnik Gegg

Dupont Key for 5x2 connector

This little gadget is small, simple but powerful. I made this one because I needed customized display cables for my projects, which I usually make myself using Dupont connectors. Those connectors come with the benefit that they're pretty…

Downloads
191
Likes
43
Rating
5
P
Printablesyury.dz

Dupont connector safety lock

Simple safety lock for 2.54mm Dupont connectors, typically found in servos or FRC CAN bus. Included STL for 1x3 and 1x4 connectors, and SCAD file for customization. The model is designed with 0.4mm nozzle and 0.2mm layer in mind. It can…

Downloads
187
Likes
26
Rating
0
P
PrintablesKladrie

DuPont : a cromulent connector cover - simpler, smaller, better, faster, in all sizes.

To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…

Downloads
186
Likes
35
Rating
5
P
PrintablesNERDCORNER

Connector 3PIN Ws2812b SK6812 12mm Dupont

3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…

Downloads
180
Likes
41
Rating
5

Variable Length Dupont Jumper Wire Holder

Resizeable Jumper Wire Holder, flat heavy base for work benches. ( Not 100% sure the modifier will work outside of bambu/orca slicer )

Downloads
167
Likes
13
Rating
5
P
PrintablesGunbleR

Crimp tool dupont contact holder

dupont contact holder for generic crimp tool. I printed with 0.4nozzle, 0.2 layer h. the screw will need to come from the other side, but it still works and makes crimping quick and easy Ideally the pin slot should be pretty tight. if…

Downloads
166
Likes
40
Rating
5
P
PrintablesJesús Conde

4 pin Dupont connector

I needed a 4 pin connector to make a WLED strip connection and designed one from scratch using Dupont terminals.

Downloads
165
Likes
29
Rating
0
P
Printableshotpretzel

Group Connector for Dupont Wires

DuPont wires commonly used in Arduino\Raspberry Pis now have a group connector. This is a 24 pin wire block that can be plugged in or out, retaining the order of the wires. Wires can be reclaimed and used for other projects simply by…

Downloads
157
Likes
37
Rating
0
P
Printablesmaker_714

remix from Thingiverse: USB to Dupont adapter

This is a remix of https://www.thingiverse.com/make:998505

Downloads
153
Likes
18
Rating
5
P
PrintablesNERDCORNER

Connector housing Dupont 3Pin

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
149
Likes
26
Rating
0
P
PrintablesNERDCORNER

Connector housing Dupont 2Pin

Connector housing, Dupont 2Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
147
Likes
30
Rating
0
P
PrintablesShabubu

Dupont and JST Crimper Multiboard Holder

Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…

Downloads
144
Likes
20
Rating
5
P
PrintablesNERDCORNER

CONNECTORS Edition 2-6 Pin Dupont / Jumper-Cable 12mm

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/

Downloads
141
Likes
49
Rating
4
P
PrintablesNERDCORNER

Connector housing Dupont 8Pin

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
137
Likes
28
Rating
0
P
PrintablesXVIIarcano

Pi Pico case with room for headers and dupont connectors - blank or voron logo

Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…

Downloads
133
Likes
12
Rating
5
P
PrintablesKristen Smith

Gridfinity DuPont Jumper Wire Holder

I like the changes Funkenjaeger made to the gridfinity DuPont jumper wire holder, but I also like the Gridfinity Ultra Light Bins by HuMa. This combines both.

Downloads
131
Likes
20
Rating
5
P
PrintablesNERDCORNER

Connector housing Dupont 4Pin

Connector housing Dupont 4Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
130
Likes
20
Rating
5
P
Printablesidenny1

Gridfinity Dupont wire holder 1x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.

Downloads
125
Likes
24
Rating
5
P
PrintablesDeadius

Hernández y Fernández - Dupont et Dupont - Thomson and Thompson- Schulze und Schultze - Tintín

Descripción Diseño de Hernández y Fernández de Tintín a 4 colores impreso con AMS “boca abajo” con lámina PEI texturizada. -------------- Otros diseños: Tintín y Milú: https://www.printables.com/es/model/647590-tintin-y-milu Capitán…

Downloads
125
Likes
11
Rating
0
P
PrintablesNERDCORNER

Connector housing Dupont 6Pin

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
118
Likes
34
Rating
5
P
PrintablesSixpack99

Dupont 4 pin connector housing

I needed a way to take 4 individual Dupont connectors and consolidate them into a single 4-pin connector. This little piece does the trick. Hope it helps you as well! I included two sizes so use whichever one best meets your needs. STEP…

Downloads
118
Likes
30
Rating
0
P
PrintablesFunkenjaeger

Gridfinity DuPont Jumper Wire Holder

Modifications for usability, see differences listed below

Downloads
117
Likes
23
Rating
0
P
PrintablesNERDCORNER

connector 4PIN RGB strip for 12mm Dupont

3d printed Connector for jumper wire (12mm Dupont) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…

Downloads
115
Likes
29
Rating
0
P
PrintablesDang Le

Nozzle for Dupont Molykote compound tube

Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…

Downloads
113
Likes
11
Rating
5

Dupont Jumper Wire Bundlers for Multi-Pin Connectors (TPU)

Update Feb 17 2025 Moved the original files with a 0.1mm tolerance to their own folder Uploaded new files with a 0.2mm tolerance Dupont connectors are 2.54mm Openings are 2.74mm Added Configurations 1x3 with filled-in center pin (useful…

Downloads
112
Likes
24
Rating
5
P
Printablesbitsplusatoms

Female Dupont Header Cutting Jig

Background : I needed to cut down some female Dupont headers and found the jig by Nikki81 . It worked well, but I wanted to make some minor tweaks so I created a parametric design in Fusion 360 that allows you to adjust things like the…

Downloads
107
Likes
17
Rating
0
P
PrintablesClement Roblot

Dupont cables transportable box

This is a double compartment cylinder box that snaps together shut to allow transportation of dupont cables. I had the specific need so I build the box, the two half snap together snug. Maybe a bit too snug as you will certainly need a…

Downloads
107
Likes
18
Rating
0
P
Printablesqwertymodo

IWISS SN-025 Dupont Locator

One of the biggest differences between proper OEM crimp tools and the cheap ones is the presence or lack of a locator that holds the crimp terminal in place at the proper depth, and allowing the wire to be inserted with the jaws wide…

Downloads
104
Likes
18
Rating
0
P
PrintablesDavid H. Brown

DuPont Polarizing Pin Plug

These tiny items fit into Dupont(R)-style pin header housings to prevent plugging it in unless a pin has been omitted in that location. This allows reasonable polarization protection while using common 0.1" (2.54mm) pin headers that…

Downloads
102
Likes
23
Rating
5
P
PrintablesJürgen Weigert

Male IDC connector for ribbon cable and dupont jumpers

A typical 2-row 2.54mm ribbon-cable connector is female. That is, the part on the cable has holes, the part on the PCB has pins. I needed a special application where where the part on the cable has the pins. Those are rare to get. However…

Downloads
100
Likes
30
Rating
0
P
PrintablesTri_Engineer

Dupont Connector Mount

Mount multiple Dupont 4- or 2-pin Connectors

Downloads
98
Likes
31
Rating
0
P
Printableswipeer

DuPont to 4-Pin Fan Adapter

This is a hybrid connector that allows you to plug standard 4-pin PWM fans into four DuPont pin headers . It is a perfect solution for connecting PC fans to ESP32s, Arduinos, Raspberry, or breadboards without cutting wires. This model…

Downloads
97
Likes
13
Rating
0
P
Printablesadrilou

Organisateur cable dupont

Remplissage : 5% Imprimé sans support. Epaisseur de couche 0.2mm

Downloads
97
Likes
16
Rating
0
P
PrintablesOskari Nykänen

Dupont wire organizer with Skadis mount

I needed a dupont wire organizer with proper wall mounts. I also need the wires easily taken off the wall and sometimes I need to take them with me. None of the models I found met the requirements so I designed my own. This design has the…

Downloads
97
Likes
18
Rating
4.5
P
PrintablesNERDCORNER

CONNECTOR housing 10Pin Dupont / Jumper-Cable

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
96
Likes
30
Rating
0
P
Printablessaamirt

Dupont Cable Organizer for Skadis without Embossed Text

I didn't like or see the use of the specific text for M-M, M-F., and F-F for the cable organizers so I removed the text.

Downloads
94
Likes
8
Rating
0
P
PrintablesNERDCORNER

Connector case 3PIN Dupont / Jumperwire V1.1

14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
93
Likes
14
Rating
5
P
PrintablesNERDCORNER

CONNECTORS Edition 3-8 Pin Dupont / Jumper-Cable 12mm

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/

Downloads
93
Likes
13
Rating
0
P
Printablesmatthew s

DHT11 holder (with hole for DuPont)

Simple remix to allow 1x3 DuPont connectors through the hole. The top available in the original model.

Downloads
93
Likes
3
Rating
5
P
PrintablesJeřabina

Přípravek na ukládání dupont propojovacích kablíků

Vytiskněte si jeden spodek a dva boky a potom je sešroubujte samořeznými šroubky. Díra pro šroubek je schválně malá, aby jste si ji převrtali dle potřeby.

Downloads
91
Likes
17
Rating
4
P
Printablesmathiasl

Dupont Cable Lock

Liked the original but it was a little bit too long, so I shortened it a bit and made the snapping mechanism better.

Downloads
90
Likes
13
Rating
0
P
PrintablesBen Tomsen

1x4 Gridfinity dupont cable storage 75-120-160mm

1x4 Gridfinity dupont cable storage 75-120-160mm

Downloads
87
Likes
13
Rating
5
P
PrintablesEricGS

Dupont to JST 2.54

this is one of those things that should not exist, don't print this! it doesn't matter that does not require supports or that is made for 0.4mm nozzle at, its wrong and you know it

Downloads
86
Likes
22
Rating
4.5
P
PrintablesArneB

Gridfinity Dupont cable box

Gridfinity Dupont Cable Box with Locking Mechanism This custom-designed Gridfinity box is ideal for organizing Dupont cables. Available in two sizes (3x1x5 and 3x1x6), it fits seamlessly into the Gridfinity system. Features: Rotating Lock…

Downloads
84
Likes
16
Rating
0
P
PrintablesNERDCORNER

Connector housing Dupont 5Pin

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
84
Likes
14
Rating
4
P
Printablescapyplivl

Dupont cable organizer

Dupont cable organizer short and long without label, can be good for other types of cables or combinations.

Downloads
83
Likes
12
Rating
5
P
PrintablesJori

DuPont connector cable lock

Made this to make my 18650 and the connected modules “pocket proof”. (https://www.printables.com/model/383680-modular-18650-battery-holder-cap) You can put a double DuPont connector pair in it, slide the cover on top. Locks into place…

Downloads
81
Likes
21
Rating
0
P
Printablesneondino

BDM Frame w/ Probe Pens for Dupont Cables

This is a work in progress! BDM board/frame & probe pens I designed the probe pens to fit standard dupont cables/connectors. The heads of the connectors are 3mm wide, so the square opening to fit them in is slightly wider to accommodate…

Downloads
77
Likes
4
Rating
0
P
PrintablesNERDCORNER

Connector housing Dupont 3Pin 12mm

12mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
76
Likes
15
Rating
0
P
PrintablesMoxL

ST Dupont Lighter stand holder display

ST Dupont lighter stand or display purposes. Can be nice to have the collection presented on the same displays. The lighter displayed is a Ligne1 Full size, so should fit most models. (There is one without branding for when you got other…

Downloads
74
Likes
5
Rating
0
P
Printablesreadybrek

RaspberryPi RPI dupont connector - 26 way

Basically just needed a shorter version of this. Having used the original 40 way design a couple of times (it works fantastically), I needed to hook up a waveshare 35a display. Turns out the plug body is perfectly fine for holding pins as…

Downloads
73
Likes
14
Rating
0
P
PrintablesNERDCORNER

CONNECTOR housing 9Pin Dupont / Jumper-Cable

Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Downloads
71
Likes
19
Rating
0