Lamp Bulb Idea Electronic Circuit wall art
Try printing at 80% of speed and very hot bed (75° ?) Best R
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
- Downloads
- 7,797
- Likes
- 2,741
- Rating
- 4.88
5,831 models
Try printing at 80% of speed and very hot bed (75° ?) Best R
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
This is a fun model to print because it's quick (49 min), and multi-color makes it look 10 times more awesome! Change your filament color/ material at layers 26 and 30 to achieve this look. Make sure you turn supports ON, or else your…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
For the easier application of static grass on the model of railway, I created a model of grass applicator. For more details, check the article: https://blog.prusaprinters.org/3d-printed-railways-size-h0-187/ Print instructions Everything…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Print approx. €8.09–€9.88 excl. taxPreliminary estimate for one variant
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
Electrical Grid Series - Sub Station Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Substation. Guaranteed to process and stepup/stepdown all of the electrical…
Print approx. €10.00–€12.22 excl. taxPreliminary estimate for one variant
This is a model inspired by the Electric Furnace from the automation game Factorio. I am in no way affiliated with Wube Software, this is a project under fair use. Using version 1.1 is recommended, but both models can be printed without…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
A classic aircraft that was famously piloted by Amelia Earhart on her final flight, modeled using Blender. Slicing done on a Prusa Mini+ with custom supports
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit three toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Keychain Electric scooter
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
This model is a quick adaptation of the original model to fit two instead of four brush heads to fit my needs. The model printed well without supports on my Prusa Mini with PLA filament.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
UPDATE updated 2024-May-09 with ‘Extras’ which includes ‘a title peice’ tiles for ‘period’ and ‘group’ 'key' for explaining the different aspects of each element ‘corner guide’ for the packing board, ‘hangers’ for hanging the finished…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Handle on my parents' refridgerator broke off and I found a great replacement for 3d printing by @HolesAreRound, but the handle itself was too long for the specific model my parents have - I had to shorten it so that the inner distance…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
Before printing check the shape of the inner part of the lock. This key works with the triangle shaped element mechanism. Measurements of the key blade: length: 14mm diameter: 16mm triangle_depth: 6mm triangle_side: 10mm My tests with PLA…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Traveling case with aeration holes and a sliding lid for Oral-B electric toothbrush with 2 heads
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant
stampato in PETG, ma va bene qualsiasi materiale. semplice, da stampare con i supporti
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
making felt cushion felt washer punch jig chromatic button midi keyboard https://shop.yushakobo.jp/products/consign_giabalanai
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Print MK3.5 0.2mm Strukural Prusament PLA Supportn:None Infill_0% Seam position: Random First layer: 225/60°C Other layers: 220/60°C
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
To mount the cool 3D4U by Miele Borehole Cleaning Aid to an Electrolux vacuum cleaner with a special non-round-shape tube, you need a 34mm tube adapter. There are some designs available, but not one fitted good enough for me. So I created…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
The Eve Outdoor Cam Secure Floodlight does not fit a standard 4 in. round electrical box common in North America. This is an adaptor plate. Print in PETG to be waterproof and UV outdoor safe. Designed to fit #6-32 nuts and machine screws…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
Tesnenie na vylagrovany klb riadiacej tyce.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
English: This model features a 0.74mm wall thickness version, equivalent to two layers without gap fill, available in two variants: shorter and taller. Specifically designed for refilling salt in the Electrolux dishwasher model:…
Print approx. €16.05–€19.61 excl. taxPreliminary estimate for one variant
Compact Electrical Junction Box for WAGO 221 (or similar) Connectors This is a 3D printable model of a compact junction box designed for the neat and safe enclosure of wire connections using lever connectors, such as the popular WAGO 221…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I build a fan controller using a Seeeduino Xiao microcontroller soldered to an ElectroCookie Mini PCB Prototype Board . I wanted a small case for this and similar projects such as those using an ESP32 D1 Mini or ESP8266 D1 Mini. There is…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
The provided knee supports for the HBCE 990 cello don't make it feel like a real cello. I was unable to keep a good posture while making this cello rest on my knees, maybe due to my legs which are smaller than average. This replacement,…
Print approx. €9.37–€11.45 excl. taxPreliminary estimate for one variant
I don't like cable-ties. This mods uses the 4 existing holes on top of the Tarmo5 main-frame to fix this cable-management adapter. You click the Electronic Speed Controller and it snaps, hold it tight. Same for switch (a bit harder to…
Print approx. €4.52–€5.53 excl. taxPreliminary estimate for PETGSource material: PET
72mm electrical (in-wall) box cower with DIN rail.
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
EEW Nano bobbins can be used on the EEW 6.0 flyer, but they leave a sizeable gap on the flyer rod. the bobbin can slide to the left at higher speed and drag the break band with it, which will eventually catch on the flyer arm and stop the…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
I am a fan of the Aptera Autocycle, and the company's goals. So since I am still in college and unable to buy one. I decided to print one out to demonstrate why I like this car. I freshly started into the hobby of 3d printing during this…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for PETGSource material: PET
Upgrade from your traditional electric doorbell button to a modern Reolink video doorbell without any drilling or modification to your wall. Features: - Designed to fit standard (Schneider) Electric doorbell mounting boxes - Direct…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a riser frame for Schneider Electric Exxact 4-way socket-outlet. Part: WDE002488 Frame is 12mm thick, hole is 10mm. Print instructions I printed this in white PETG. Unfortunately the white shade was not correct.
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
High voltage label, it needs double tape 3M to mount in the door
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Print MK3.5 0.15mm Strukural Prusament Petg Supportn:None Infill_0% Seam position: Random Horihontal shells TOP: 6 , Bottom 6 First layer: 240/85°C Other layers: 245/90°C
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a spring loaded self-closing version of my previous design. In about 45 minutes you can create this life saving outlet cover, designed for young children to prevent electrocution. After printing, assemble the two parts by just…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Introducing the Game Changer in Winter Car Maintenance! Say Goodbye to Manual Scraping with our Electric Ice Scraper. Are you tired of waking up early to battle the frosty windshields? Have you struggled with traditional ice scrapers that…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
There is a hole to the left of the trailer hitch on the Jeep Cherokee Trailhawk meant for electronic things. If you don't have those things, you can use this to cover that up (could also hide something in it turning it into a “secret…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
Part is not possible to buy separately and the complete part is out of stock. Second hand really hard to find.
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
I needed a good solid hook to hang my lawn trimmer and other small electric gardening equipment on. I designed this hook in such a way that it facilitates equipment with power cords attached at various positions in the hand grip. The…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Headlight replacement for "Invacare Kite" wheelchair. Right and left sides
Print approx. €6.88–€8.41 excl. taxPreliminary estimate for PETGSource material: PET
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 20 - 30 minutes Slicer settings: 0.3mm layer height, 3 perimeters, supports everywhere Post processing instructions: Remove the supports gently and…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Holder for 4 electric toothbrushs Oral-B and 2 toothpastes. Support pour 4 brosses à dents électriques de marque Oral-B et 2 dentifrices
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
Holder for 2 electric toothbrushs Oral-B and a toothpaste Support pour 2 brosses à dents électriques de marque Oral-B et une case pour un dentifrice.
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Krytka na kartáček ,aby hrotem něco nepoškodil při uložení např. v batohu.
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This here are replacement internals for the side stand sensors of a UNU electric scooter. These are two pieces that need to be glued together inside the sensor with either fast curing epoxy or super glue. I recommend PETG and printing…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Model is a high powered rocket electronics bay sled to hold a Eggfinder MiniTX GPS Tracking unit in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. #4 fasteners are required to attached MiniTX…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Use PLA. 3pcs horisontal walls.
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
Electronically Assisted Astronomy (EAA) is a corner of the amateur astronomy hobby that uses cameras and electronic viewing devices to enhance the viewing experience of dim fuzzy astronomical objects. The Celestron Origin smart telescope…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for PETGSource material: PET
Introducing, the electron bucket. A toolbox with a carry handle, designed for din rail mounting two power supplies and the terminals to keep them organized. Individually switched outputs and all. Cornboy, as always, for scale (Look up The…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
A imprimer de préférence en PETG, des support sont prévu pour la partie ronde. 2 périmètres, 15% remplissage.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
I’m excited to share that I’ve built an animatronic endo base! This is perfect for anyone wanting to display an animatronic suit or start a new project. I’ve included both the STL and G-code files, so feel free to make any changes to the…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
Personal Electronic Thingy : Starship Titanic : Douglas Adams. Handheld device used onboard the Titanic by its crew.
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for one variant
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Miniature template for drawing electrical schematics. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/792825-french-rulers Template For Logic Diagrams…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
Improved version - combination of 2 models Better locking mechanism to secure the wires larger adhesive area for double sided tape combination of following models:…
Improved version Better locking mechanism to secure the wires Want to have a commercial licence on this model? → Join the CLUB :)
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Here's a B.C. Rich Warlock style guitar body I made. This is a fully functioning guitar body, just add a neck and electronics! I started making this in July 2022 right around the time Stranger Things 4 ended since I wanted the guitar from…
Parts print flat and snap together. Print shorter legs for electric guitar and longer legs for acoustic guitar. The connector and right and left back are the same for both versions.
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
…If you don't feel like springing for a coffee, please at least be sure to hit like & post a make, I'd love to see your prints! A super quick design to turn your Spiral Vase Rose into a glowing electronic tea light with a natural rosebud…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
4 in 1 Schlüssel für Schaltschränke und Industrieanlagen. 2x 4 Kant Schlüssel, 1x Dreieck und Schaltschrank Schlüssel. am besten mit 60% oder mehr Füllung drucken für Stabilität. 4 in 1 key for control cabinets and industrial plants. 2x…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
This 4-Way Utility Key is designed for opening a wide range of electrical, utility, and service cabinets. The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians,…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
To make the ski lift you first need to print all the parts. Print 8pcs of; “wheel-connect2”, wheel-connect1, wheel-connect3 Print 16pcs of “small-wheel” You can add som grease to make the small wheels spin better. You also need to use…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
A stylish key cover that turns any fey into an electric guitar. Look at the second photo for assembly. If you have any questions or concerns feel free to comment.
Electric mining drill from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The drill can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included…
The 10mm diameter, 3mm height magnets to hold the two halves of the UFO together are optional, as a display piece gravity alone should be sufficient. Use a piece of wire to hold the UFO over the base at a height and an angle you like.…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
electric cabinet key (triangle)
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Introducing a new and improved template for drawing electrical schematics. With the help of the template, you will be able to draw cross-sectional electrical diagrams. It is suitable for beginners and students. The template is designed so…