1,780 models
A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This model can be used as an inexpensive and configurable breadboard alternative, with the advantage that the components can be soldered in-place. Print instructions Important Notes You need a 0.25 mm nozzle to print this The electronic…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
New base with electronics housing + post for 200mm PC Fan Desktop Fan by Hijinx. The base allows to add a DC jack and a power switch to make this cool fan even better to use. Notes: You will need some tools and parts to connect the…
Print approx. €3.86–€4.71 excl. taxPreliminary estimate for one variant
I don't like cable-ties. This mods uses the 4 existing holes on top of the Tarmo5 main-frame to fix this cable-management adapter. You click the Electronic Speed Controller and it snaps, hold it tight. Same for switch (a bit harder to…
Print approx. €4.52–€5.53 excl. taxPreliminary estimate for PETGSource material: PET
[ENG] VOLTa221 is an innovative open-source kit that combines accessibility, flexibility, and hands-on learning. Each module can be 3D printed and equipped with WAGO 221 connectors, enabling quick and reliable wiring without soldering.…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for PETGSource material: PET
Tactile images of electronic symbols. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To break…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Use PLA. 3pcs horisontal walls.
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for PETGSource material: PET
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Try printing at 80% of speed and very hot bed (75° ?) Best R
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…
This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…
I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…
This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…
This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…
I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…
INTRODUCTION This is version 2 of the design backporting all the learnings from the release of EMS 300/350. The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another printed mount for each of the…
I have been looking for a electronics box that has the lid on the underside of the printer but I have not found one so I made one myself. I have include the cad files so you can make it your own if you want. Whats in the box? 1 Raspberry…
Electronic box/enclosure fully customizable Updated V1.01 : Add vents Updated - V1.02 : Add invert option Footbox length update Vents update (logo) Use screw_holes.scad librarie https://www.thingiverse.com/thing:1731893 Updated - V1.03 :…
Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…
The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
After trying various electronics enclosures for my Ender 3 Pro, I was not happy with many of them due to various issues with each Fit was tight and not very forgiving for running cables Airflow/cable management were usually afterthoughts…
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…
a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.
Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front control panel, Raspberry PI 4 and a buck converter to power Raspberry PI. Included in the files is…
Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.
This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…
Updated design! Made for my specific needs, but you can enjoy it as well. Click here for the previous version. NEW: Place for the BTT 24v UPS Detachable back door for the wireing Exhaust fan 2 on/off switches Holes for cable management…
An OpenSCAD electronics enclosure designed to hold one rectangular PCB. The default settings are for the following: -PCB w/ 100mm x 40mm mounting hole spacing -SPAX #8 1 in. pan head screws for cover -M3-0.5 threaded heat set inserts for…
V2 (updated design) is available - https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system INTRODUCTION The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another…
Basic parametric snap fit electronics enclosure / box. Printable without supports. You can size as you like using user parameters in Fusion 360. F3D file supplied. When exporting STL / STEP, it will already be orientated ready for…
Simple holder for Wera electronic screwdrivers.
This is a full model build of a Tron legacy disc desktop display including circuit python code to light it up. The Base was created to be printed on an MMU and I'll add a tutorial on how to create the whole piece shortly. I printed the…
I divided the Brain Electronic circuit wall art into 4 pieces so I could print it BIG in my 3d printer. I joined it and glued the “CPU” part on top of it to hide the joints.
⚡ Introducing the Millennium Machines Universal CNC Electronics Box The Universal CNC Electronics Box is designed to simplify, standardize, and streamline your CNC’s electronics setup—no matter which machine you’re running. Whether you’re…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:
With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
rack suitable for network switches up to 8 ports
Albi Magic reading Electronic pencil. This is a binder for different sizes of books and old and new pencils.
Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…
I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors. Print instructions Category: Organization Summary This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to…
Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…
A base for the Infinity Cube Lamp (i used the Snap-fit Infinity Cube Light (No Glue) von DieselRabbit) and WEMOS D1 mini. I implemented a 5V connector because my lamp has 156 LED, which needs approx. 50W for full brightness . Which equals…
Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted. Here is an example how to use it: You just…
This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…
I really liked the stackable electronics mini - rack but it wasn't tall enough to fit the mini PCs I needed to put on it. This is a remix that is 25mm taller. It is the same length and width so you can stack the originals and this taller…
i did insert magnets in the cpu block and the holes around to hold objects on the wall (experimental feature ;-) inserting was done via negative modifier in the size of the magnet(s) plus 5% a colour change pause was inserted on layer 9…
Majority of my designs in FreeCAD is some sort of an enclosure. So I decided to make this generic box with all dimensions defined in a spreadsheet. The dimensions can be adjusted for a specific project and the resulting box can be used as…
NOTE Updated V2 of the frame for the Voron 2.4 has been released. Please use that as it has a number of improvements. https://www.printables.com/model/816080-ft-ems-v24-350-v2 The cable ducts that were designed for EMS 300 have now been…
This is a simple holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series. Print upright (with the cable cutout on the build plate) and supports on the build plate only. 15% infill works fine.
Materials 4x M3x3 heat set inserts (short) 4x M3x10 socket head screws Print the LED light guide with transparent PETG. You can find a nice guide here: https://www.printables.com/model/15310-how-to-print-glass Preparation Put M3 heat set…
INTRODUCTION This frame was designed to help manage the electronic components required for a switchwire conversion (SKR Mini E3, Creality boardes, Raspberry Pi, U2C boards etc,..). Typical conversions have you squish all these components…
Two mounts for the MDT LRA SEND iT - MV3 level. both are vertical mounts for the SPUHR mono block scope rings. The 45 degree mount is to have the SEND iT on the RIGHT side of the gun. This is the best location for lefties and/or left eye…
I needed a box for a three AAA batteries for my electronics project. Couldn't find it so I made it myself. Enjoy.
This was the first project I created using OpenSCAD. The goal was to create a minimalistic design that would look good and be able to contain all my electronic components for hobby projects. Configuration : Printer: Ender 3 v3 SE 3…
A replacement for a lost or broken plastic Roland-compatible drum module mount, modeled to replicate the original MDP-7U. Fits: Roland-compatible modules that use the MDP-7U mount, including TD-3, TD-6V, TD-8, TD-10, TD-12, TD-20, TD-30,…
I've insulated my printer and found that the electronics area compromised the heated chamber. This divider will help to separate the electronics from the chamber air. Will not make it air-tight, but add a blockage to the convection path.
This was a HUGE project that took me a LONG time to design. I wanted the cleanest Anet AM8 conversion out there. No wires showing, all the electronics hidden, a rock solid frame, silent printing, and the cleanest looks you could imagine!…
This piece is to support the wire channels when doing inverted electronics mod on a Voron Trident. I wanted to keep everything neat and allow an easily removable bottom panel if necessary. ABS or PETG recommended. Check sizing against…
The Zaribo ZLC kit comes with a BTT Octopus Pro, but I wanted to run Klipper and have things as tidy as possible. A BTT Manta M8P does the job but is slightly larger and has different mounting holes. I remixed the Zaribo case to suit the…
