Search results: elt

Sort order

Counting matching models…

P
PrintablesPrusament

Tension Meter for the GT2 belts of i3 MK3S+ or Prusa MINI+

The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…

Downloads
37,072
Likes
5,941
Rating
4.89
P
PrintablesJanHajn

Belt tension tester

Description: The method of measurement with my tester is similar - it also compares the tension of the belt Gates 2MGT-6 (used in 3D printers such as Prusa MK3 and Prusa MINI or similar) with the tension values recommended by the belt…

Downloads
6,178
Likes
2,059
Rating
4.91

Belt Tension Gauge

Filament type and print density will create variations to this tension gauge. PETG is recommended. It is only a indicator of relative tension. The Fusion 360 files will give you the ability to adjust for belt widths or other belt lengths…

Downloads
5,034
Likes
462
Rating
4.87
P
PrintablesBoogie

X-Axis revision with belt tensioner

I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…

Downloads
4,665
Likes
976
Rating
4.85
P
PrintablesSaveYourBacon

Prusa Core One (+ Gen 1 / + Gen 2 / L) Belt Tension Gauge (New V2 Design)

Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…

Downloads
3,373
Likes
768
Rating
4.92
P

Factorio Transport Belts

These models are modular in design and made to connect to each other.

Downloads
2,577
Likes
1,300
Rating
4.9
P
PrintablesVerender

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Downloads
1,566
Likes
581
Rating
4.88
P
PrintablesGFS

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Downloads
1,463
Likes
121
Rating
4.83
P
PrintablesTrocheHole

GT2 Belt Fastener

A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.

Downloads
1,030
Likes
208
Rating
4.92

Prusa MK3.5/MK3.9/MK4 centre tray/cable tidy (now works with Y belt tensioners and Prusa enclosure)

To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…

Downloads
941
Likes
310
Rating
4.81
P
PrintablesTB

Prusa MK3s y-axis belt holder - GT2

I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…

Downloads
894
Likes
135
Rating
4.76
P
PrintablesMW

X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+

If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…

Downloads
794
Likes
247
Rating
5
P
Printablesflok

Better Ender 3 X Belt Tensioner

The frame of the tensioner ist bolted to the x-gantry. That makes it stiffer and it fits better to the aluminium bar. It also doesn't twist while the printer is moving along the x-axis. New parts required: 1x DIN M8 Screw 30mm or longer…

Downloads
770
Likes
112
Rating
4.75
P
PrintablesHenlor

Dual Z Belt Tensioner - Ender CR Neptune Kobra Aquila Gemini XY

This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…

Downloads
741
Likes
119
Rating
5
P
PrintableseSeL

Railway trackside shelter 1:87 H0

Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…

Downloads
738
Likes
84
Rating
4.75
P
PrintablesAllpa

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

Downloads
599
Likes
135
Rating
5
P
PrintablesgEEk

Rotating Hanger for Ties, Belts, Necklaces, etc

Needed a space-efficient way to organize my ties and belts, so I designed this after seeing something similar being marketed in an online search. The hanger has a carousel that can be rotated to make it easy to consider what kind of…

Downloads
573
Likes
158
Rating
4.69
P
PrintablesGrillparty

Grinding block - Sandpaper Belt (303 mm x 40 mm)

Very practical sandpaper holder. If the sandpaper is used up, the sanding belt can simply be moved a few centimeters. The sandpaper belt holder consists of 3 printed components: Block Tensioner Eccentric Other accessories: Cylindrical pin…

Downloads
461
Likes
107
Rating
5
P
PrintablesSvw

Melting Dali Clock

This is a working melting clock from the famous painting The Persistence of Memory by Salvador Dali. The 3 clock hands orbit in the horizontal plane for the “regular” part of the clock that lies on the green block and switch to a vertical…

Downloads
395
Likes
221
Rating
0
P
Printableszuberio

Heltec V3 Case with 18650 cell and TP4056 charge controller

My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…

Downloads
348
Likes
72
Rating
5
P
PrintablesShoshke

Delta Cooler - Ender 3 V2 dual 4010 blower cooler with ABL support

Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…

Downloads
344
Likes
72
Rating
5
P
PrintablesMrViddy

Seatbelt Warning Light KeyChain

keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 37mm x 29mm 6mm Keyring hole

Downloads
314
Likes
107
Rating
4.75
P
PrintablesOzzy The Artist

UPDATED: OLIGHT Belt Holster

This is a flashlight holder to go onto most normal belts. it is designed to accommodate OLIGHT Warrior 3S type flashlights with metal clips attached.* There is a feature that works with this type of flashlight - put the light into the…

Downloads
298
Likes
40
Rating
5
P
PrintablesLanzDesign

Snooker Chalk Magnetic Pocket Clip (or Pool/Billiards, also clips to belt)

This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…

Downloads
278
Likes
52
Rating
0
P
PrintablesNem

PretzelTrap v1.0 (mouse trap)

Introducing the PretzelTrap mouse trap. As the weather turns cold and the holidays come upon us, mice and other rodents make their way indoors in search of shelter and food. Keep these often disease carrying unwanted pests from making…

Downloads
275
Likes
49
Rating
4.67
P
Printablestom

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…

Downloads
216
Likes
25
Rating
5
P
PrintablesEva Máčová

Celtic Tablet Weaving

Tablet weaving (youtube.com) TABLET WEAVING (weaversguildnorthshore.org) Jak tkát na karetkách? (youtube.com)

Downloads
211
Likes
63
Rating
4.67
P
PrintablesCharleszard

Heltec WIFI_KIT-32 Snap-Close Enclosure

This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…

Downloads
196
Likes
17
Rating
5
P
Printables3D Sets

BeltDrive 4x4 - 3536 size brushless motor

To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).

Downloads
191
Likes
35
Rating
5
P
Printablesbeale_uk

Snooker, Pool, Billiards's chalk holder belt clip

This build is for a chalk holder for snooker/pool. I've looked at a few online but couldn't find one that suited my needs so, in fusion I designed this simple clip with a removable chalk holder. the clip and the chalk holder will take a…

Downloads
190
Likes
10
Rating
0
P
PrintablesTakehiko

Delta Band Saw Insert

This is a zero clearance insert for a Delta Rockwell 14" band saw. It was modelled on a 1950 model, but should fit a wide range of vintages. Fusion 360 model file is included if you need to tweak it.

Downloads
183
Likes
25
Rating
4.75
P
PrintablesTeo_211

Lamborghini Revuelto Wall Art

Wall Art silhouette model of the Lamborghini Revuelto.Adjustable size. I accept model suggestions you might want or like

Downloads
174
Likes
46
Rating
5
P
PrintablesEBMX220

Security belt car for dog-cat BEEFY

It's a bit bigger for faster crashes. I don't like 60mph poodle missiles.

Downloads
154
Likes
26
Rating
5
P
Printablesfonzy

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Downloads
151
Likes
49
Rating
3
P
Printablesfifindr

Celtic Knot Coaster - Triquetra

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a touch of timeless elegance with the Celtic Knot Coaster! With a diameter of 100 mm and a thickness of 4 mm, this intricately designed coaster…

Downloads
147
Likes
32
Rating
5
P
PrintablesMoNkEy

MK4 Y-Axis belt tensioner MK3/S/S+

Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…

Downloads
146
Likes
35
Rating
4.8
P
Printableso.bostik

Jack 3.5 belt clip - Wired IEM

Simple belt clip for jack 3.5mm cable intended for stage use for wired in ear monitoring. The inspiration for this print was this belt clip from thingiverse .

Downloads
141
Likes
17
Rating
5
P
Printablesschneems

DustyBoi: Under Table Vacuum adapter for Delta 52-963 Bandsaw

Here's a video in action: https://www.reddit.com/r/functionalprint/comments/myy667/i_used_to_have_a_dusty_bandsaw_now_i_have_dustyboi/ This attachment removes the dust from the bandsaw blade. The vac attachment is sized for a Festool D36…

Downloads
135
Likes
32
Rating
0
P
Printablessourdoge

Wall Mounted Belt Hook

I wanted a belt hook to hold my Arcade belts, as they aren't easily hung from a typical hook. I mounted this using two 3M Command Strips. It even holds regular belts! (Though not as smoothly) No supports needed, print face down.

Downloads
130
Likes
26
Rating
4
P
PrintablesDom

Peanuts - Linus van Pelt

This is Linus van Pelt ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…

Downloads
126
Likes
25
Rating
5
P
PrintablesJJ XX

Boston Celtics Logo Xmas Ornaments (Clover Logo + Single Color Lucky Leprechaun)

Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).

Downloads
120
Likes
5
Rating
0
P
PrintablesDom

Peanuts - Lucy van Pelt

This is Lucy van Pelt ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…

Downloads
114
Likes
19
Rating
5
P
PrintablesDave D

Keltec P32 Magazine Speedloader (and P3AT)

Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…

Downloads
113
Likes
8
Rating
5
P
PrintablesPupy88

Celtic Weaving – Set of Cards for Belts and Bracelets

This set of cards for Celtic weaving is designed for creating decorative belts, straps, bands, or bracelets. The cards can be used with finer materials such as wool, cotton, or yarn, as well as thicker cords and strings. The result is…

Downloads
112
Likes
134
Rating
0
P
PrintablesTruchsess

Schutzkappe für Zeltheringe und Erdnägel/Cover for Tentstake

Wer hat sich beim Zelten noch nie an einem Zelthering oder Erdnagel gestoßen? Meist tut es unangenehm weh! Die oft gesehene Lösung mit aufgeschnittenen PET-Flaschen finde ich nicht sehr schön; und außerdem: wozu hat man einen 3D-Drucker?…

Downloads
106
Likes
16
Rating
0
P
Printablesmscalora

Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…

Downloads
103
Likes
18
Rating
5
P
PrintablesRick269

Delta-P X2 duct and fan mount for Phaetus Rapido hotend

Modified so the part cooling duct and extruder cover/fan mount is 8.3mm lower to suit the standard Phaetus Rapido and volcano hotends. Only the version without LED mount provisions is provided. EDIT: By request, have uploaded a 3mm version.

Downloads
99
Likes
11
Rating
5
P
Printablesmscalora

Super Deluxe Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…

Downloads
95
Likes
30
Rating
5
P
PrintablesPeter Farell

Celtic festival of Samhain

Celtic festival of Samhain Wall Mount Art. Samhain: A Glimpse into the Celtic Precursor of Halloween The Celtic festival of Samhain, pronounced "sow-in," stands as a significant and ancient observance that marked the end of the harvest…

Downloads
91
Likes
31
Rating
0
P
PrintablesDave D

Keltec PF9 Magazine Speedloader

Speedloader for the 9mm magazine for the Keltec PF9. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print it upright with a 10mm…

Downloads
86
Likes
4
Rating
0
P
PrintablesCAD-Guy

Heltech Wireless Paper Desk Stand

Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.

Downloads
83
Likes
17
Rating
0
P
PrintablesRobin Frisk

MK2s Y-belt holder

This is a remix of OCDs belt holder, that did not fit my version of the Prusa MK2s which is the later revision. It is basically his idea of the belt going straight trough the carriage holder applied on the original belt holder part from…

Downloads
80
Likes
3
Rating
0
P
PrintablesJellyTitan

ZippyPaws dog treat bag replacement belt clip

Replaces the stock belt clip for the Zippypaws treat pouch. Mine was just gone - not sure if it broke or fell off. This replacement version has a width of 16mm. The stitching on the clip slot was inconsistent. I included the f3d file with…

Downloads
77
Likes
11
Rating
5
P

Theodore Roosevelt Bust and "Man in the Arena" Base

More photos to come once I have printed and assembled the model.

Downloads
75
Likes
5
Rating
5
P
PrintablesNiko_Ju

Ford Galaxy Seatbelt retention clip

I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…

Downloads
74
Likes
4
Rating
0

Belt Clip, UMS V1

Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…

Downloads
71
Likes
5
Rating
0
P
PrintablesoXiVanisher

Karate belt hanger

This belt hanger is designed for Shotokan Karate Kyu belts. Please be aware that different organisations or even dojos have different belt colors for different kyus.

Downloads
71
Likes
14
Rating
0
P
Printablesbart

Scuba weight belt slide stopper

Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…

Downloads
70
Likes
5
Rating
0
P
PrintablesCelare

Rumi Belt Design or Hanging Jewelry Charm

Another necessary costume element for Rumi's Golden Outfit- its the thing that hangs on her belt, whatever it should be called. I saw people use beads and jewelry tools, but this was quick and lightweight. Sized for an adult costume, and…

Downloads
69
Likes
7
Rating
0
P
PrintablesBooks

Mustache Coin (Novelty, US Quarter, and Euro Sizes Included)

Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .

Downloads
67
Likes
8
Rating
0
P
PrintablesAnfra3d

Melting Snowman Coaster 4 Color REMIX

Fixed the bottom gap, re-meshed using Windows algorithm and added a water layer as a 4th color. Also scaled up by 50%

Downloads
62
Likes
10
Rating
5
P
Printablesjensileinchen

Montagehilfe für 40x40 Peltier-Element

Eine flexible Montagehilfe zur Bestückung eine Aluminium-Kühlkörpers mit 12 Stück 40x40 Peltier Elementen. Die Montagehilfe wurde entwickelt um das Verrutschen der Peltier-Elemente nach dem Auftragen der Wärmeleitpaste zu verhindern,…

Downloads
60
Likes
12
Rating
0

Felt Edge Squeegee for Vinyl

Felt Edge Squeegee for Vinyl Print in the desired size and glue the felt over the edge.

Downloads
60
Likes
4
Rating
5
P
Printableshangbar3d

Clicksheet Belt

Clicksheet belt is a printable belt. Clicksheet can be attached to any click sheet so you could click and attach. it is 0.4mm wide meaning it was designed for a one pass print. no support is needed

Downloads
59
Likes
7
Rating
0
P
PrintablesEva Máčová

Celtic tablet weaving

60x60x1,5mm print it with pla by two colors - you do not need MMU for this model, you just change filament between layers make sure that printing plate is clean beginner friendly

Downloads
58
Likes
37
Rating
0
P
PrintablesBooks

Celtic Knot Coin

Coin with a celtic knot engraved in it. Uses art from PublicDomainVectors.org .

Downloads
58
Likes
17
Rating
0
P
PrintablesLudo B

Bushokje, tramhalte uit beton modelbouw 1/87. Bus shelter, tram stop made of concrete model construction 1/87.

Met mijn zoektocht naar printbare schaalmodellen op 1/87ste kwam ik deze bushalte tegen. In my search for printable 1/87th scale models I came across this bus stop. regards Ludo

Downloads
58
Likes
3
Rating
0
P
Printableshazeleyes

LiPo Battery Carrier for Belt Clip

Parts Required to Complete: SmallRig Mini V Mount Battery Plate with Belt Clip 2990 V Mount Accessory Plate ( 3D printed or from SmallRig MD2801 ) M3 x 6 Flat Head Screws (3) Battery Strap Velcro, Servo Tape, or Non-Slip Pad Why I Made…

Downloads
50
Likes
4
Rating
0
P
PrintablesRick269

Delta-P Fan Duct remix for Phaetus Rapido hotend

11 Aug 22 - I've since made a better version, based on the remixed Delta P X2. It uses a modified extruder cover/fan mount and part cooler but keeps the original internal design intact.…

Downloads
50
Likes
6
Rating
5
P
PrintablesMykashy

Rear Seat Belt Bracket for Ford S-MAX / Galaxy

Tento 3D tisknutelný držák zadního bezpečnostního pásu je navržen pro vozy Ford S-MAX a Ford Galaxy . Ideální pro kutily, kteří chtějí nahradit nebo vylepšit stávající držák. Vlastnosti: Kompatibilní se zadními sedadly Ford S-MAX / Galaxy…

Downloads
49
Likes
5
Rating
0
P
PrintablesLinus Buda

Weltkarte Geldgeschenk

Dies ist ein kreatives Geschenk, wenn Sie Geld verschenken möchten. Einfach beide Teile ausdrucken, den gewünscheten Betrag in die Hülle legen und das Weltkartenteil daraufdrücken. Dieses klemmt dann perfekt darauf.

Downloads
42
Likes
5
Rating
0
P
PrintablesRPK

Birdbath, Vogeltraenke

EN: In the position specified in the .gcode file, the bowl just fits into the build volume of an MKS3+. Requires printing with supports. Quality with 0.3mm sufficient for the purpose. I designed the size for the existing stone shell,…

Downloads
40
Likes
2
Rating
0
P
PrintablesRikkers

Motor Cover for Delta Power Compound Miter Saw Model 36-075

This model provides a replacement for a broken or missing motor cover on a Delta Compound Miter Saw. It works on model 36-075 and possibly others with similar shaped motor. I own this miter saw, and many years ago I broke off the plastic…

Downloads
37
Likes
10
Rating
0
P
Printablesmach

Power button Adapter for Heltec Lora 32 case for meshtastic

I had to buy different power button for the case. Drilled a hole and glued it in place. This button is the adapter to make it work. On/off switches: https://www.amazon.se/dp/B0CB8D2HW3 Original model:…

Downloads
36
Likes
6
Rating
0
P
Printables3dprinterrrrr

Makita 9403 4" x 24" Belt Sander - replacement dust nozzle (416497-7) and vacuum attachment

Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…

Downloads
34
Likes
5
Rating
0
P
PrintablesK.Hanuszkiewicz
Downloads
33
Likes
5
Rating
0

Torch-taser belt holster

Multipart belt holster I modeled for a friend. It have space for torch-taser combo(Police 80000W), DEWALT folding pocket knife (DWHT10313) and carabine utility blade knife . Belt parts are held together by 4x M3x20 screws, you also may be…

Downloads
31
Likes
2
Rating
0
P
Printablesfifindr

Melted Catchall Bowl

A simple architectural catchall bowl with a surreal, melted appearance. The soft, flowing deformation contrasts with a clean geometric base, creating a sculptural object that feels both solid and fluid at the same time. Designed for keys,…

Downloads
25
Likes
6
Rating
0
P
PrintablesChristian

MX24 Rennzelt Halteclip fuer Feder, Mittelstange

Da mir die Schraube, welche die Feder in der Mittelstange hält, nicht gefiel und im laufe der Jahre stark rostete, habe ich mir einen Clip modelliert. Er kann mit ein wenig Druck, inkl. der Feder, in die Stange eingesetzt werden und…

Downloads
21
Likes
0
Rating
0
P
PrintablesJer

Jet 14-DXPRO Bandsaw Belt Tension Reminder

The Jet 14-DXPRO bandsaw has a tensioner handle behind the top wheel and nearly out of sight. I'm not used to tensioning the blade before use and de-tensioning when done yet, so I made this cover for the power switch that should prompt…

Downloads
20
Likes
1
Rating
0
P
Printableseof

Celtic Shopping Cart Token

Designed for 0.15 mm layer height with 15 layers. The bgcode-file and the 3mf-file have included filament change stops at layers 3, 8, and 14. Thus you can use 4 different colours.

Downloads
19
Likes
8
Rating
0
P
PrintablesFlo

gates belt cdx front sprocket guard

I fixed the part with small wood screws.

Downloads
19
Likes
2
Rating
0
P
PrintablesJAnthony

Display riser on aluminum extrusion for INFI-20 Belt Printer

I developed a riser that connects to the aluminum extrusions that will allow for the housing of the display and control board to properly cool. The design from Sainsmart does not allow for proper cooling as the fan sits on top of the…

Downloads
18
Likes
0
Rating
0
P
PrintablesPeter_Sörgel

Öffner für Frischhaltedosen (Hebeltool)

Wenn die motorischen Fähigkeiten nachlassen erbeben sich immer wieder neue Probleme, die eine Lösung brauchen. Jüngstes Beispiel sind die Frischhaltedosen (Bild 2), mit denen ich meiner Mutter Essen vorbei bringe. Es müssen solche Dosen…

Downloads
18
Likes
1
Rating
0
P
PrintablesMatthias

Vacuumcleaner adaptor for black & decker beltsander KA83

To connect your black&decker KA83 to a kärcher vacuum hose (you need my hose adaptor)

Downloads
17
Likes
1
Rating
0
P
PrintablesSEDAudio

Beta Designes Clip Stick V1 Replacement Belt Clip

A replacement belt clip for the original Beta Designs V1 clip stick. Printed in PLA with 100% infill, can print without supports if you are willing to sand. Should slot onto your harness or gear loops without a problem, but can be a bit…

Downloads
16
Likes
3
Rating
0
P
PrintablesLudo B

Pin with stick for scarf or belt. Speld met stokje voor sjaal of riem.

Bij de kroningsfeesten in Tongeren droegen veel mensen deze speld om hun kledij op te binden. ook deden ze het rond hun sjaal. Ik dacht dat kan ik ook wel printen. Je kan ook andere vormen en kleuren naar gelang de sjaal toepassen. At the…

Downloads
16
Likes
2
Rating
0
P
PrintablesBonzen

Retekess TT105 Belt Case (Sleeve with clip).

Retekess Horse Riding Wireless communication system After receiving the Retekess Horse Riding set (which comes with a neck-rope), I had the idea of trying to design a case and belt clip for it, to make the use of the TT105 more…

Downloads
15
Likes
0
Rating
0
P
Printables3D Druck Profi

Zelthaken/Zelthering

Der Zelthaken hält besser als herkömmliche, da er zwei "Schaufeln" besitzt.

Downloads
14
Likes
1
Rating
0
P
PrintablesMAHWE

Busch & Müller BRIXXI und Reflektor Halter für Ortlieb Arschraketen Satteltaschen mit Daisy Chain

Busch & Müller Brixxi und Reflektor Halter für Ortlieb Satteltaschen Arschraketen Satteltaschen mit Daisy Chain oder Taschen mit ähnlichen Montagepunkten. Ortlieb Satteltasche…

Downloads
14
Likes
2
Rating
0
P
PrintablesMatthias

Rollenhalter für Winkelträger-Regal

Der Regalhalter ist für ein Rohr (Installationsrohr) mit Außendurchmesser von 25mm konstruiert. Die Länge des Rohres bitte an dein Regal anpassen. Bitte kontrolliere vor dem Druck, ob die Position der Bohrung für deinen Regalhalter passt!

Downloads
14
Likes
5
Rating
0
P
PrintablesRonnynnoRMan

Felt Foot Rectangular Socket

A rectangular socket for felt. Size of the foot: 20 x 15. Size of the felt strip: 20 x 13.

Downloads
8
Likes
0
Rating
0
P
PrintablesJosef C.

YAMAHA Synthesizer CS 01 Belt Holder

Kleiner Gurthalter für den Yamaha Synthesizer CS 01. Davon werden je Instrument 2x gebraucht. Eines links, das anderes rechts angeschraubt. Mit PLA+ oder PETG oder ABS ausgedruckt, hält es fest wie das original (das aus Metall ist). -Man…

Downloads
6
Likes
0
Rating
0
P
PrintablesKilotick

BabyBeltPro - Toolboard Caps and Covers

Update 20261008- Added two new Cover Cap variants Six caps and covers for your BabyBeltPro LDO Toolboard, in flat and angled versions. Flat Cap (easiest to print and install) Flat Cover Flat Cover Cap Angled Cap Angled Cover Angled Cover…

Downloads
1
Likes
1
Rating
5
P
PrintablesRepkord

MR PLOW aka Delta-Plow V2-R2 For Auto Bed Clearing Automation

AUTOMATERS… ROLL OUT! Add this beefy blade to your automated bed clearing workflow and get the best of breed cooling on your parts while you're at it with the highly aclaimed DeltaP duct r2v2 aka “Slutty Duct.” This creates a rigid…

Likes
22
Rating
0
P
PrintablesRaduSorin1

Creality K1 belt tension meter

Description Creality K1 and other printers. Belt tension meter to adjust belts at same and correct tension. If you print it right, when the needle is in the middle, the belts tension should be at 110hz. Settings: Nozzle: 0.4 Line height:…

Downloads
24,655
Likes
1,687
Rating
5
P
Printablesmuzi.works

H1 - Case for Heltec V3 running Meshtastic

[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…

Downloads
20,898
Likes
2,529
Rating
4.83
P
PrintablesTonyG

Heltec v3 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
17,148
Likes
1,678
Rating
4.86