The source marked this model as adult content.
- Downloads
- 49,199
- Likes
- 12,528
- Rating
- 4.75
21,870 models
The source marked this model as adult content.
Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…
This is a fully functional 3D Printed RC Semitruck model. The main attraction includes an automatic hitching system plus power & command delivery to the trailer. Future trailers such as side dumps, lowboys, belly dumps and cargo trailers…
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Instructions by Printium 3D For Iron Man, you should be printing the outer armor in Iron Red and Gold filament. I choose to use PLA instead of the recommended PETG because I got more model detail from the PLA. I did use galaxy black PETG…
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
I love the original ButtPals design by dgoalva but I like to twist my bread clip to put it on and off and the original design was to thick to give me that freedom. So I printed them at 2 mm height and noticed a weak point breaking the…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Perfect gift for Mother's Day Presente perfeito para Dia da Mãe Regalo perfecto para el Día de la Madre If you like my work consider Buy me a coffee 😊
Remix for the infamous Cascade card wallet that holds up to six cards. Print as aligned. Thanks to Hugo for making the original design! UPDATE 09/12: Added version with the money clip Happy printing! NK
Remix of the Weekly Pill Case / Organizer with Personalized Monogram Screw by printfutura , whose design was inspired by the 7-Day Pill/Capsule/Tablet Dispenser by Jambeetle and the Parametric Pill Boxes by pmoews . I take lots of big…
I saw the super cool print in place box by DrJones and i wanted to try to make it so only I can open it. Print it with low filament flow so the parts dont get stuck together. (All redy set to low flow in the g.code) All box sizes are the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
English version follows. Stavebnice modulární pažby pro vzduchovky Artemis (SPA/SMK) CP-2 a CP-1 (též Diana Chaser, Bandit). Oproti originálu nabízí (subjektivně) lepší ergonomii, nastavitelnou a vyměnitelnou pistolovou rukojeť, lícnici a…
A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…
Round version of the eye is added Project file added G-code file added
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Remix BoxBot B-01 into keychain for everyone that want their keys guard by this cute robot. I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Update 12-06-2025: Added V2 of the controller holder. Removed tiny overhangs from the front pattern, that pushed through the bottom surface. Bottom surface should lay completely flat now! ---------- We bought our Nintendo Switch in the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
The original model by RealEmmettS came in three sizes “ S, M, L”. Even the large size was too small for current large smart phones so I created an XL size. Please read the included PDF for additional print info. Please hit the like ♥ and…
This model was recreated based upon user Laurens model “ cigarette container with lighter” - but I wanted one to hold a full sized lighter and 100 sized cigarettes. I also wasn't overly fond of the amount of threads on it. I went back to…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up…
You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
I wanted to speed up the print time and save some material so I made the hex holes bigger.
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
I printed this model but found the two bottom supports the phone actually rests on were too far apart for Android mobile devices. So, I slightly modified these supports to better hold iPhones. Please see additional print info. in the…
I found TomoDesign's Joy Fidget earlier today, printed one out and thought I'd try remixing it to fix a couple issues I had. First off, its a great model! Simple printing, easy assembly, novel design on the spiral spring and fun to play…
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No (v2) Supports: Yes (v1) Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
Improved version that prints in-place and the ring is attached later. I recommend to sand the surface that connects to the base. I have not changed the blade from the original model. The key is also offset for easier hold.
Big Lego lightsaber
For those of us who can't paint, I remixed the ornament to a multi-color version. The 3MF is scaled up to be about a 3.5" ornament. I wanted a decent sized print to be shown with pride on our tree. As an added bonus, it makes it a little…
This is a remix of the print sheet holder designed by Waldmops. This a stand alone version. I printed in PETG but it should work with PLA Infill: 15% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Added in recesses for M4 nuts for easier assembly. Also modified the trigger holes to take M4 instead of M5. Added a small chamfer on one of the overhangs to slightly reduce needed support. Refer to the original thing for more details.…
A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…
The handle is suitable for any weapon with this finish. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support,…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Everywhere If you like my work consider Buy me a coffee 😊
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Turtlue Kid) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.20) Flament : PLA 3n3.…
Remixed the original model in Fusion 360 so it could be repaired and remeshed as a single head. Created the .3MF with a hollow rod to unify the internals into a single body, but still look like 2 on the outside. This makes the body…
A stand for the Lego Millennium Falcon, remixed from https://www.thingiverse.com/thing:4790242 to fit on a Prusa i3 M3s+ buildplate. Basically I removed 1mm from both sides of the base, which doesn't really effect anything. If you are…
I printed in PLA Kodame: Infill: 15% Layer Height: 0.15mm Supports: Yes, organic Eyes and mouth: Infill: 15% Layer Height: 0.15mm Brim: Yes If you like my work consider Buy me a coffee 😊
The tolerances were a little tight so I changed them in this version. Also fixed the weird looking hole on the large flap. UPDATE: I messed up the orientation, new model has the helical gears in the right orientation so that they can be…
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Stylish gaming headset stand inspired by the Corsair Gaming ST100 design stand dimensions 120x120x250 The premium headphone stand can be printed on the Prusa MK3/S/S+ printer as a single part. It can also be printed on a PRUSA MINI/MINI+…
A remix of two lego benches https://www.printables.com/cs/model/636790-lego-compatible-benchy https://www.printables.com/cs/model/337421-lego-benchy
Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Video of the make The Supportless Cute Dancing Fox Figurine created by Macroglossum is now available for 3 color printing on bambustudio! Follow me on Instagram / TikTok / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy…
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers Revision 1 • Modified width to be compatible with…
The Articulated Sea Dragon! 🌊🐉✨ Thats a remix of original dragon: https://www.printables.com/model/907466-ice-dragon-articulated-figure-keychain Fixed Sea Dragon I have added bevels to make the print more flexible and less spiky Now it…
Printing & Assembly instructions Print the Ramp on its side, I also recommend printing with an Inner Brim 3mm if you are concerned about low bed adhesion. I printed at layer hight of .35 for speed and 10% Rectilinear infill two Perimeters…
I am doing a series of remixes of this model; this is my US flag version Please see additional print info. in the included PDF Please post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D Please hit…
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
20/10/2024 - Correct stl uploaded I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: No If you like my work consider Buy me a coffee 😊
This is a REMIX of the Articulating Raspberry Pi Camera Mount for the Prusa Mk3 Note that i did not modify or create new components, i assembled some components together to obtain a simple Raspberry Pi Camera Mount for the Prusa Mini Thx…
A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Remix of Prusa Lack enclosure to provide more height and allow for double doors. If you want doors, cut the glass/plexi to 220mm x 500mm. If you want a wall, use glass/plexi 440mm x 500mm. I used the original door holders, but provided…
MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…
Remix mit Noppen und Fuzzy-Skin für ein besseres Handling.
This is a remix of Mao Zedong's figure, I added platform to. Was made as a gift to my friend.
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
(Thicker) Mini Shoe Horn with HONEYCOMB Cut-Out | REMIX Made a HONEYCOMB Cut-Out remix from the great original model and added a hole/honeycomb version for the thicker version of the shoe horn as well, the original hole was a bit too…
I printed in Silk PLA Infill: 15% Layer Height: 0.20mm Supports: Yes If you like my work consider Buy me a coffee 😊
These are the nine ion dice (30mm cubes) that I've used for my "Ion Dice" game for learning inorganic nomenclature. The white-page activity can be found for FREE at my Teachers Pay Teacher's page linked below. The first six are for…
Replaces traditional vertical outlet. This is a slight derivative of the work by @Chriswak at https://www.printables.com/model/115385-duplex-outlet-shelf It has fewer holes and a flat top to accommodate larger items.
Made a remix of nt2021s shelf with stronger hooks an only 2 supports at the bottom for cleaner design. Update: Corrected the slight angle of the shelf by decreasing the tolerances. Print Settings Printer: Prusa mini+ Rafts: No Supports:…
The frog itself doesn't need supports, but the hook does.
Originally I was unable to align the front stop of the original grip with the end of my handguard due to the placement of the screw holes. I've added a section with a screw hole to the back so you can have more freedom aligning it on the…
I printed in PLA Infill: 15% Layer Height: 0.20mm Variable Height: Change height from 2 layer to the end to 0.1mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…
NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Set myself a half day challenge to half the print time of the RC2 face shield. Prototype revision for high-speed printing 1 hour 30 minutes for 1, could be faster. We are currently producing sets for food delivery volunteers for the…
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
-----Updated March 22nd, 2020 V1.4, new improved larger radial grips and more powerful spraying nozzle size----- This is a simple portable bidet that is to be attached to a standard plastic disposable bottle. Let’s give people in our…
A remix that removes most of the material. it is a remix of this design https://www.thingiverse.com/thing:4249113 Print instructions .3 mm. Print settings are for a I3 MK3S Slicer Version 2.1.1 ~14 minutes for the full cut ~16 minutes for…
CZ verze 10 × 15 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 13 × 18 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…
Watch out for your ice cream ****No Need Support****
Atremis or Diana Diana is a goddess in Roman and Hellenistic religion, primarily considered a patroness of the countryside and nature, hunters, wildlife, childbirth, crossroads, the night, and the Moon 1 . She is equated with the Greek…
print without support
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
Levi Sitts provided a great collection of gargoyles (see here : https://www.prusaprinters.org/prints/20577-gargoyle-fence-post-toppers ) I wanted to put a couple of them on top of two solar light posts, but my posts have pyramidal tops -…
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
https://www.buymeacoffee.com/maxt ---------------------- What? The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis…