Search results: emp

Sort order

7,263 models

P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant

Downloads
34,739
Likes
2,168
Rating
4.9
P
PrintablesGSX07

Temperature tower

This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…

Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant

Downloads
16,134
Likes
352
Rating
4.8
P
PrintablesSpinname

Temp Tower + Explanations

Here's how you have to set in Prusaslicer to test the temperatures. https://www.youtube.com/watch?v=uVaJpcBTCgQ&t=4s The tower is divided into distinct blocks or levels, each marked with the corresponding temperature. Allows observation…

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15,063
Likes
406
Rating
4.92
P
PrintablesdePrintinator

Contemporary Dice Tower/Storage v2

Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…

Print approx. €10.35–€12.65 excl. taxPreliminary estimate for one variant

Downloads
11,297
Likes
3,671
Rating
4.91
P
PrintablesCelta

Temp Tower (Fast)

I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
10,452
Likes
606
Rating
4.9
P
PrintablesDJGummikuh

Stringing Test / Temp Tower

Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
10,016
Likes
182
Rating
5
P
Printablessteveleader

Prusa Mini Temptower for PLA, PETG and ABS

This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…

Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant

Downloads
8,068
Likes
340
Rating
4.87
P
PrintablesSylveonika

Bullet Journal Template

Bullet journal template Bullet journaling is a customisable organisation system that combines a planner, diary, and to-do list in a single notebook to enhance productivity and track personal goals. I've created this template to speed up…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
7,305
Likes
3,167
Rating
4.74
P
PrintablesMiroslav Faist

Empire State Building (SKYSCRAPER) - detailed model

Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.

Print approx. €11.27–€13.77 excl. taxPreliminary estimate for one variant

Downloads
5,811
Likes
342
Rating
4.89
P
PrintablesMolodos

Spirograph drawing template

Disclaimer: This design is inspired by the Spirograph drawing toy. 'Spirograph' is a trademark of Hasbro, Inc. This product is not affiliated with or endorsed by Hasbro, Inc. A simple Spirograph drawing template gear kit that leads to…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
5,732
Likes
1,982
Rating
4.81
P
Printablesgeektoybox

Temp Tower PLA/PETG/ABS/ASA for MK4

Please don't forget to like the model if you find it useful. Thanks!

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
4,898
Likes
293
Rating
4.83
P
PrintablesJürgen Rotner

Temperature Tower

Desiged this tower in freecad after the model of already existing examples

Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant

Downloads
3,871
Likes
96
Rating
4.76
P
PrintablesFilip Honzárek

Corner Radius Router Template (5-80mm)

Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
3,245
Likes
730
Rating
4.97
P
Printablesashurexm

PLA Short Smart Compact Temperature Calibration Tower

Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
2,746
Likes
71
Rating
4.86
P
PrintablesKilinar

Temperature towers for PLA and PETG. GCODE for ELEGOO Neptune 3 Pro included

Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro

Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,200
Likes
67
Rating
5
P
Printablesbkerler

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
1,961
Likes
222
Rating
4.92
P
PrintablesTheSith

Temperature tower 195-230

EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…

Print approx. €2.21–€2.71 excl. taxPreliminary estimate for one variant

Downloads
1,831
Likes
57
Rating
5
P
Printablesmade3d

"temple of venus" desktop and pendant lamp

Desktop and pendant lamp with cableholder function. Lamp shade inspired by the surface structure of the temple of venus and roma in italy. https://www.instagram.com/made3d.de/

Print approx. €8.64–€10.56 excl. taxPreliminary estimate for one variant

Downloads
1,793
Likes
621
Rating
4.86
P
PrintablesRingarn67

Updated 220811 Ultimate All-in-One Temperature and bridging Tower (Auto Temp Setting)

Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…

Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,701
Likes
132
Rating
4.67
P
Printableskunaa

Temperature tower with bridging test | PLA GCode included

Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…

Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant

Downloads
1,649
Likes
46
Rating
4.5
P
Printablesbkerler

MK4S w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,521
Likes
214
Rating
5
P
PrintablesᗯIᒪᗪᗩ

Template Ruler with Electrical Diagrams

Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,372
Likes
531
Rating
4.93
P
PrintablesPresswerk65

Stencil template Dinosaurs

Stencil for drawing with dinausaurs

Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant

Downloads
1,065
Likes
202
Rating
5
P
PrintablesMiguel M.

Circle Template

Description Circle template, from 1/4 inch to 2 inches, in 1/8 increments. Corners are radius gauges, 1/4, 1/2, 3/4 and 1 inch. Printing Make sure your bed adhesion and first layer is spot on, details in the numbers are the most…

Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant

Downloads
874
Likes
165
Rating
5
P
PrintablesDanB

Ruger 10/22 Magazine Block Empty Chamber Indicator

This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
811
Likes
114
Rating
5
P
PrintablesAndro

Notes To-Do template and box

Useful combination of a box and templates for your notes. The templates come in three versions: To-Do list, with a tick off field lines, for longer sentences blank, for you to add your logo The box keeps your desk clean and organized.…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
809
Likes
516
Rating
4.67
P
PrintablesAnand Jasani

Contemporary Napkin Holder

I designed a napkin holder for the modern home. The part requires very little infill for the first 5mm. Slots were added to the bottom to decrease the amount of plastic needed to print.

Print approx. €5.88–€7.19 excl. taxPreliminary estimate for one variant

Downloads
727
Likes
93
Rating
5
P
Printableswedgeworks

PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping

Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
725
Likes
39
Rating
5

Parametric glasses templates / glasses arms

After printing, heat the arms with a heat gun or a hair dryer and bend them to fit your head. Two Part Version The initial design (the one part one) did hold up for a month or two, but it did brake after some time at the mounting point to…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
723
Likes
62
Rating
5
P
PrintablesIsaac Howard

Bullet Journal Monthly Template

Bullet Journal Monthly Template with OpenSCAD file

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
698
Likes
246
Rating
5
P
PrintablesRichard

Contemporary Trophy

Design: This contemporary design trophy is designed in Fusion360. Print: Print is quite simple, you can either print base and top separately with different color or you can directly slice it as multi-color print. The one from photos is…

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
669
Likes
108
Rating
5
P
PrintablesTimothy_Ecc

Graded Temperature tower for PLA, PLA PLUS, and PETG on the Prusa XL with input shaper

This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant

Downloads
667
Likes
25
Rating
0
P
Printablesfixumdude

Star Wars Rebel and Empire Symbol Bookmarks

These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
550
Likes
171
Rating
5
P
Printablespierro3D85

moai en asa, 0% de remplissage, deux parois

n'oubliez pas de likez, commenter et poster une photo de votre réalisation. don't forget to like, comment and post a photo of your creation.

Print approx. €5.57–€6.80 excl. taxPreliminary estimate for one variant

Downloads
491
Likes
62
Rating
5
P
PrintablesdePrintinator

Contemporary Dice Tower & Compact Storage Solution

I've designed a dice tower that also doubles as storage for your dice and a single mini, perfect for Dungeons and Dragons and other tabletop RPGs. I've built in a knurled ring around the bottom to easily rotate the inner tower to expose…

Print approx. €21.50–€26.27 excl. taxPreliminary estimate for one variant

Downloads
468
Likes
145
Rating
5
P
PrintablesDahan Meir

Tefillin House - New Temple Model - בית תפילין - מודל בית המקדש החדש

Tefillin House - New Temple Model I uploaded different variations of a new model with minor improvements (such as 2 axes). I uploaded files with "Shel Yad" and "Shel Rosh" embossed or highlighted. The inscription "If I Forget You" is…

Print approx. €13.08–€15.99 excl. taxPreliminary estimate for one variant

Downloads
459
Likes
27
Rating
5
P
PrintablesSpeedy

GoPro Mount Template (Editable)

GoPro mount to attach the action camera to all possible surfaces with the help of double-sided adhesive tape. In my case to a fullface helmet. There is a hole where the hexagon screw can be easily attached. I would be very happy about any…

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
427
Likes
31
Rating
5
P
Printableskjrps

Cat stencil ruler, template / Schablone für Katzen-Silhouetten

Das Originalmodell war für den FFF-Drucker zu filigran und zu schwierig zu drucken. Ich schnitt viel unwichtige Bereiche weg und skalierte es auf 140%. Drucken Sie bitte unbedingt mit +0.5mm x-y-Compensation. Jetzt hat es die nötige…

Print approx. €0.36–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
390
Likes
65
Rating
4.8
P
PrintablesMarin

Temperature & Humidity Meter Stand

I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant

Downloads
381
Likes
79
Rating
4.92
P
Printablesvaldman

TempTower ASA Prusa mini 230-270 i PETG 215-250

Wieża temperatur dla ASA 230-270 i PETG 215-250

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
376
Likes
13
Rating
5
P
Printablessh

👓 Enhanced glasses temple tips (bent more for better hook behind ears)

Info: glasses temples bent more behind ear than https://www.printables.com/model/205857-fun-nerd-glasses-with-interchangable-lenses-choose so glasses are more safely positioned for usage with :…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
351
Likes
36
Rating
0
P
PrintablesPetra Ollender

6 animals footprint paws template stencil keychain

It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
349
Likes
92
Rating
5
P
PrintablesHammerTech3D

PLA Temp Tower - Prusa Core One / Core One + | Balanced / Speed / Structural (195°C - 235°C)

PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
346
Likes
14
Rating
5
P
PrintablesGralastair Bean

PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
36
Rating
5
P
PrintablesMiniWorld3D

Temple of the Inscriptions - Palenque, Chiapas, Mexico

Welcome to Palenque! 🇲🇽 The Ancient Ruins Collection - Mesoamerica is a dedicated subcollection to the legacy of past civilizations in parts of what is present-day Mexico and Central America. This model was originally made by Leonardo…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
71
Rating
0
P
PrintablesPeter Farell

Jain Temple Column Cup

Cup/Vase made from the details of a Jain Temple Column.

Print approx. €25.91–€31.67 excl. taxPreliminary estimate for one variant

Downloads
298
Likes
73
Rating
0
P
Printablesneale

Small Parametric Temperature Tower

A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…

Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
18
Rating
5
P
PrintablesJellyTitan

Xiaomi Aqara square Temperature and humidity Sensor Bracket for screw or zip-tie

Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
279
Likes
59
Rating
5
P
PrintablesMartin v R

Ikea Utrusta (and Blum Inserta) hinge template

This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
275
Likes
19
Rating
5
P
Printablesacademo

MK4, PETG, 0.4 nozzle, Input Shaper Temperature tower

This is the gcode for a PETG temperature tower for the Prusa MK4 with Input Shaper firmware Profile: 0.2mm SPEED (no changes) Nozzle: 0.4mm Filament: Generic PETG (no changes) The temperatures goes from 215 to 250

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
274
Likes
22
Rating
5
P
PrintablesFranky 71

Drapeau de Sécurité pour Chambre Vide - Safety Flag for Empty Room

Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
268
Likes
11
Rating
5
P
PrintablesDanB

Ruger 10/22 or Precision Magazine Block Empty Chamber Indicator Version 2

This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
267
Likes
17
Rating
0
P
PrintablesZdeněk

SOSS Hidden Hinge Mortise Router Template – All sizes!

Introduction This is a set of jigs that you can use to route the stepped mortices to install your SOSS invisible hinges. There are model files for every standard type of the SOSS hinge. They come in two flavours, depending on the…

Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant

Downloads
251
Likes
25
Rating
0
P
Printablesideat0m

Lionel Messi - Template Stencil for drawing and painting

Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Lionel Messi Template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size of…

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
237
Likes
16
Rating
5
P
PrintablesPeter Farell

Japanese Temple Guardian

Japanese Temple Guardian

Print approx. €11.12–€13.59 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
62
Rating
5
P
PrintablesPatrice_C

Rempart tour château - castle walls - Kapla compatible

Salut, Voici une impression pour agrémenter une tour en Kapla pour la réalisation d'un château. J'ai utilisé le nouveau paramètre dans Prusaslicer “surface irrégulière” (épaisseur 0,1 - distance 0,3). Calibré pour les Kaplas originales…

Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
31
Rating
5
P
PrintablesMaxime

IKEA PRESSA CLOTHESPIN REMPLACEMENT

To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
35
Rating
5
P
PrintablesHeiko

Systemprofil-Eckverbinder 20x20

Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…

Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
209
Likes
38
Rating
5
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant

Downloads
202
Likes
120
Rating
0
P
PrintablesYevgen Negvey

TempTower 220-265 / 180-225 with .3mf Easy to edit

M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo

Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
196
Likes
2
Rating
5
P
PrintablesMiniWorld3D

Temple of the Tooth - Kandy, Sri Lanka

🇱🇰 ශර ලකවට සදරයන පළගනම! Welcome to Sri Lanka! Sri Dalada Maligawa (Sinhala: ශර දළද මළගව), commonly known in English as the Temple of the Sacred Tooth Relic , is a Buddhist temple in Kandy, Sri Lanka, in the central highlands of the island…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
31
Rating
0
P
Printablesrazandersen

Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
20
Rating
0
P
Printablesu01pei

Cut template for Prusa Covid19 shield

two templates to mark the cut lines for the lower and upper side of the Prusa shield. Two separate files, because the whole shield size (240x240) does not fit on the build plate. Especially the curves are difficult to make perfect without…

Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
164
Likes
4
Rating
5
P
PrintablesNickbaxter

Hole Punch Template for Prusa RC3 Face Shield 4 Hole

Includes two separate sets of templates for cutting out face shields for the Prusa RC3 Face Shield. One template is for a standard single hole punch and one for a square single hole punch. I recommend the square type, otherwise you'll…

Print approx. €6.50–€7.95 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
1
Rating
0
P
PrintablesFrankTheTank908

Hatchbox ABS Temp Tower MK3/s Gcode

Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
3
Rating
0
P
PrintablesJaMi

TEMPLATE FOR CUTTING INSULATION

ŠABLONA PRO ŘEZÁNÍ IZOLACE https://www.youtube.com/watch?v=nSeCnuHCYws

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
150
Likes
6
Rating
0
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
49
Rating
0
P
Printablescrashkg

Bandsaw Template Guide

I wanted a guide to help me use the bandsaw to cut out curves more accurately. Instead of following a line drawn on the wood I place a template on the surface, the guide follows that template exactly. This uses 1 Magswitch GripRight 90…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
147
Likes
57
Rating
5
P
PrintablesNem

Template for Yubikey Neo / Yubikey 4

Yubikey USB key template. I've tried to model this to very exacting specifications. I would GREATLY appreciate any feedback that anybody has where this doesn't match a Yubikey Neo (I know I need to round off some edges by the USB pins).

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
11
Rating
5
P
PrintablesMarin

Square Temperature & Humidity Meter Stand

Updated to ver. 1.1 (recess on the rear side for the instrument is removed). For those who need a stand for squared shaped temperature and humidity meter. As I already designed a stand for a round meter I need one for a square-shaped too.…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
20
Rating
5
P
PrintablesReneA86

Kit de remplacement fermeture volet battant

Les pièces d'origine s'effritent ou se cassent avec le temps. Ce kit est un complément à “ Verrou volet battant” qui est présenté à part du fait des ses spécificités pour l'impression. La particularité de ces pièce est liée à l'exposition…

Print approx. €10.10–€12.34 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
5
Rating
5
P
Printableslukash

ChipSHOUTER and PicoEMP CNC Bracket

This is made for a CNC 3018 with ~42.5mm diameter spindle. If you have a different diameter please let me know I will happily adjust the model and add it. Allows for a very flexible Z-axis rough adjustment: You can insert the bracket into…

Print approx. €2.86–€3.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
4
Rating
5
P
PrintablesMichael Browne

Bracket for mounting Nest Temperature Sensor with 3M Command Strips

This bracket is designed to allow a nest temperature sensor to be seamlessly mounted to a wall with a “Mini” 3M Command Strip, while still being easy to remove the sensor for battery changes. Very useful for when you can't, or don't want…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
126
Likes
20
Rating
5
P
PrintablesVenture_3D

1.5 inch Schedule 10 Cutout Template For 3-1 Merge

Print in PETG or PLA Different sizes included for different Schedule 10 manufacturer OD's Works well for fabrication of Manifolds or other 3 to 1 intersecting schedule 10 components Use 3D printed template to slide on pipe, and mark for…

Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
9
Rating
0
P
Printableskiam02

Hemp leaf

Hemp leaf After I designed the ivy leaf, a request came for a hemp leaf. The roundings at the hemp leaf are difficult. That's why it will probably take some time until I have designed a seven leaf hemp. I have added a version as a…

Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
12
Rating
5
P
PrintablesStayPuft11

Miniature Park Bench - Modern/Contemporary

I like to design and print miniature benches and this is the first one I want to put out into the world! I think this is a bit of a more modern style of a bench with a modern/contemporary take on the "concrete" sides that hold the bottom…

Print approx. €6.78–€8.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
121
Likes
21
Rating
5

TempTower for MK4 InputShaper GenericPLA 0.2mmSpeed

Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !

Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
4
Rating
0
P
PrintablesLudo B

Sjabloon met gaatjes, template circles in 2 colors.

Voor mensen die veel tekenen is dit wel een hulpmiddel. Rondjes tekenen zonder passer. Voor mensen die aan meetkunde doen. In 2 kleurern afgedrukt. This is a tool for people who draw a lot. Draw circles without a compass. For people who…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
17
Rating
0
P
PrintablesMrViddy

Employees Only Sigh

148mm x 53mm 1.8mm thick no infill flexible in/out option

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
23
Rating
5
P
PrintablesLudo B

sterren sjabloon, star template

Kan je gebruiken om cirkels enzo te teken om wenskaarten, Can you use to draw circles etc on greeting cards

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
10
Rating
5
P
PrintablesPrintHermit

13 Minute Down and Dirty Wham-bam Thank You Ma'am Temperature Tower

The models for temperature towers all seem to be large and long prints. This is something that will likely just be thrown away, and no one (I don't, I assume everyone is just like me) wants to wait hours for a tower to print to find the…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
4
Rating
5
P
PrintablesRuda

Contemporary Colosseum-Style Stadium: A 3D Printed Prototype

This 3D model, designed with the visual assistance of DALL-E, is a colosseum-style football stadium that showcases contemporary architecture while attempting to simulate an architectural studio's prototyping workflow. The primary goal of…

Print approx. €32.85–€40.14 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
10
Rating
0
P
PrintablesOuwekaas

Aqara Humidity Temperature Pressure T1 senor weather cover

Aqara T1 sensor in a nice housing, protection against almost all weather types. Easy maintenance by unscrewing the T1 holder to replace a battery for example. Printing, I used organic supports, overhang threshold at 30 degrees. Used…

Print approx. €5.46–€6.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
17
Rating
0
P
PrintablesMichael S

Template Covid19 Shield Foil

When producing several of the covid19 shields without having a laser cutter this template is usefull. You can mark the holes and the upper and lower edge with a pen. The template is not as long as the foil so you have to place the…

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
82
Likes
2
Rating
0
P
PrintablesSEDAudio

Quad Cortex Tap Tempo LED Cover

A cover for the tap tempo LED on the neural DSP quad cortex

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
7
Rating
5
P
PrintablesGeorge75

Template for planting seeds / Šablona pro sadbovač (výsev semen)

Template for planting tray. A simple tool for creating holes in the dirt in a planter for planting seeds of all kinds. Thanks to the regular spacing of the holes, seed germination can be monitored. You will immediately see which seeds…

Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
33
Rating
0
P
PrintablesMartin

Temperature & Humidity Meter Stand or holder for Prusa i3 MK3 360 degrees

Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
12
Rating
5
P
Printablestom

Sammelbox für leere Batterien/ Collection box for empty batteries

Eine einfache Box mit Deckel zum Sammeln von leeren Batterien, die später fachgerecht entsorgt werden. Abmessungen: 100x100x75 mm Translation: DeepL A simple box with a lid for collecting empty batteries, which are later disposed of…

Print approx. €6.73–€8.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
8
Rating
5
P
PrintablesJT3D

Emporte pièce pour gateaux

dimensions : hauteur 10 mm hauteur des nervures 6 mm diametre : 10 cm

Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
4
Rating
0
P
PrintablesdePrintinator

Contemporary Magnetic Door Stop

This is a simple magnetic doorstop activates when you position the door over it, but otherwise allows the door to function normally. When inactive, it has a low profile, easily allowing a vacuum cleaner or mop over top of it. Bill of…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
25
Rating
5
P
Printablesmish.re

Yzma & Kronk (Emperor's New Groove)

Have fun with painting :)

Print approx. €12.97–€15.85 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
24
Rating
0
P
PrintablesKlimaP

Holder for round temperature/humidity sensor for Alu extrusion 3030 (Prusa Mini)

Holder for round temperature/humidity sensor, suitable for mounting in AL profile 3030 (Prusa Mini). The holder has prepared guide rails for the grooves of the AL profile 3030, the hole in the holders is prepared for an M5 screw (it is…

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
6
Rating
5
P
PrintablesKatona Dávid

DM WC GEL STEMPEL plunger V2 (andV3)

This is model for the "DM WC GEL STEMPEL" gel cartridge. The plunger part of it anyways. I bought the thing by accident, i usualy buy the DUCK branded one, saw the refill cartridges, and just bought them, not realising that they are not…

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
3
Rating
5
P
PrintablesDZ

Frosthaven Character AoE (Area of Effect) Templates (All Character Remix)

This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
6
Rating
0
P
Printablessgermini

Oakley Hyperlink temple

This is a simple replacement for Oakley Hyperlink eyeglasses temple. Organic support is required for lock pin only (see .3mf file).

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
63
Likes
3
Rating
0
P
PrintablesOpari3D

Piano Keyboard Template

Simple plantilla para piano o teclado para poder apuntar melodias cuando lo necesites , se a impreso en PLA Winkle negro , disfrute imprimiendolo y modificandolo a su gusto . Simple template for piano or keyboard to be able to write down…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
24
Rating
5
P
PrintablesLaLeahTortilla

Spell Template - Cleric Twilight Sanctuary 5e

This is a remix from: https://www.thingiverse.com/thing:2808346 where I personalized the 30 foot radius circle for the specific spell - Twilight Sanctuary for the Twilight Domain Cleric. In the original file, the model was too tall and…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
4
Rating
0
P
Printables3D Brothers

Šablona na ořezávání izolace / Insulation trimming template

Šablony na ořezávání izolace na potrubí. Velikosti : 15/10 - 18/10 - 22/10 - 28/10 ( Vhodné i pro izolace s 6mm stěnou ). 15/15 - 18/15 - 22/15 - 28-15 ( Vhodné i pro izolace s 10mm stěnou ). Pravý úhle, úhly na t-kus . Templates for…

Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
5
Rating
0
P
PrintablesPeter Farell

Mynocks : Empire Strikes Back : Star Wars

Mynocks : Empire Strikes Back : Star Wars Stick a few of these on your windows or models.

Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
17
Rating
0
P
PrintablesStrankler

Hygromter/Temperature/Voltage Display Case

When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…

Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
5
Rating
5