Search results: ender

Sort order

20,914 models

P
PrintablesJRT3D

Recreator 3D MK5Kit Ender3 Pultrusion Unit

Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant

Downloads
23,494
Likes
2,360
Rating
4.77
P
PrintablesMoryuthers

Ender 3 S1 circular Fan Duct

This is fan duct upgrade for the stock Ender 3 S1/Pro fan or Sprite pro extruder. Changelog Update: Aug 2,2022 Updated the file with support for resin. Print with hightemp resistant filament or print it using resin printer for better air…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,232
Likes
533
Rating
4.33
P
PrintablesKYZ Design

X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)

Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
3,583
Likes
526
Rating
4.85
P
PrintablesLW design

Ender 3 S1/pro filament sensor bracket

Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
2,879
Likes
417
Rating
4.91
P
PrintablesFizzy Chickens

Pen Plotter for Sprite Extruder ~ Ender 3 S1

Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
2,830
Likes
756
Rating
4.78
P
Printableshypotesseract

Ender 3 S1 Spool Holder Mount

This model is based on the stock spool holder mount that snaps on the top bar of the Creality Ender 3 S1 (Pro). Use it as a drop-in replacement part or in addition to the original one. With a second mount you can fit a total of three 1kg…

Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant

Downloads
2,132
Likes
187
Rating
4.86

Ender 3 Feet

A remix of thing:3520264 that removes the silicone button slots (they were too small) and widens the two pieces. Print both part A and B for each corner of the printer (4 of each). Add 4 silicone feet for each of the 4 corners of the…

Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant

Downloads
1,933
Likes
337
Rating
4.79
P
PrintablesFAYRON

Ender 3 Large ToolBox

Introducing The Large ToolBox for the Creality Ender 3. Ever wanted to stuff all of your 3D Printer's Accessories in one safe and reachable place? Well now you can! Introducing the Large ToolBox for the Creality Ender 3! Since this…

Print approx. €19.30–€23.59 excl. taxPreliminary estimate for one variant

Downloads
1,768
Likes
96
Rating
0
P
PrintablesPeter Farell

Bender

Bender: Futurama: The Simpsons

Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant

Downloads
1,696
Likes
364
Rating
5
P
Printables1llia

Table mount - extender - clamp

Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…

Print approx. €6.61–€8.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,695
Likes
1,323
Rating
4.5
P
Printablesdanny520

Print-in-Place Land Rover Defender

Print took around 20hrs at .16 layer height with %15 infill. The print will get stringing around the top pillars that can be removed with snips or a blow dryer. I'm really happy with the tolerances of the wheels, It doesn't have as much…

Print approx. €14.65–€17.90 excl. taxPreliminary estimate for one variant

Downloads
1,367
Likes
140
Rating
4.67
P
PrintablesLucas Ribeiro

4010 fan adapter ender 3 v3 se

V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
1,308
Likes
167
Rating
5
P
Printablessascha

BIQU H2 Ender 3 V2 mounting plate with BLTouch

This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…

Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant

Downloads
1,174
Likes
67
Rating
4.5
P
PrintablesTmpx64

Simple Mudguard - Bike fender - Easy print - Road Cycling - Protective - Protection gear

Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
1,164
Likes
221
Rating
5
P
PrintablesStrachatella

Ender 3 Pro push sensor cover

Do the exposed PCB's of the Ender 3 Pro push sensors bug you? Me too. That's why I made these. Just pop them on and enjoy.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
956
Likes
158
Rating
4.9
P
PrintablesDanielAlex

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
935
Likes
150
Rating
5
P
Printablestuc0w

Ender 3/5 PLA Temp Tower (BLTouch + Brim)

Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant

Downloads
886
Likes
22
Rating
4.8
P
PrintablesmoWerk

Hose Coupler | Water Line Extender | Zip Tie Tubing Repair Connector

Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
836
Likes
339
Rating
5
P
PrintablesEmbrace Making

Creality Ender 7 Direct Drive LGX Lite and Mosquito Magnum

In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
737
Likes
50
Rating
5
P
Printablesrodoca

BIQU H2 Ender 3 Pro Carriage Mount for MAD system

Designed to be used with Predy's MAD - Modular Air Duct for BIQU H2 , mounts on original Ender 3 Pro carriage. BOM (Not including MAD assembly) 4x M3 - 8 mm screws (mounting carriage base and under extruder) 2x M3 - 25 mm screws (fan…

Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
735
Likes
71
Rating
4.57
P
PrintablesTripleU

Snapback Hat Extender

Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
659
Likes
52
Rating
5
P
PrintablesJan

Ender 3 v2 Neo Spool Holder Adapter for Direct Drive

I was looking for an adapter that rotates the spool holder 90 degrees for DD extruder but I could not find any. All others models were for Ender 3 V2 which has a V-slot in front of the top extrusion which Neo does not have. This one uses…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
628
Likes
95
Rating
5
P
PrintablesElectricalBoy

Ender 3 V3 SE Heat Bed Cable Chain Mount

After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…

Print approx. €0.58–€0.70 excl. taxPreliminary estimate for one variant

Downloads
611
Likes
136
Rating
4.88
P
PrintablesPineapple Dan

Boat fender floating keyring

Hollow fender that will float with one ordinary key attached. May need to be scaled up to hold multiple keys. Print upright if you want to use multiple colours and use a generous amount of supports and a nice base like in the photo or…

Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant

Downloads
606
Likes
102
Rating
5
P
PrintablesBonkymoon

Ender 5 S1 Enclosure-Compatible Bed Mount for Camera

I wanted to have a bed-mounted camera on my Ender 5 S1, but all of the premade ones I found didn't fit in one way or another. This should be compatible with any 2020 extrusion; I included holes in the side and bottom for locking it down…

Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant

Downloads
586
Likes
61
Rating
5
P
PrintablesDanielAlex

Star Wars New Republic Defender-class Cruiser

This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…

Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant

Downloads
581
Likes
51
Rating
0
P
PrintablesNicksk3

trx4 defender seat mount

seat mount for the traxxas trx4 designed for the defender. import 2x in to slicer and mirror 1 to get both sides

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
558
Likes
80
Rating
0
P
PrintablesJan Tomášek

Ender-3 V3 SE Fan Duct - 5015 Right Side

0% infill (max 10%) Inner wall extrusion width 0.6 mm. PLA good enough.

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
550
Likes
80
Rating
4.29
P
PrintablesAlex Lawson

Ender 3 S1 Wyze V2 Camera Mount

Camera mount to attach a Wyze camera to your Ender 3 S1. It's still a WIP as it'll require a dab of hot glue to actually hold on to the printer. Prints easily on my Ender 3 S1, just have to flip the model 180* so it'll sit flat. No…

Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant

Downloads
514
Likes
57
Rating
4.5
P
PrintablesPeter Farell

Print approx. €14.90–€18.22 excl. taxPreliminary estimate for one variant

Downloads
493
Likes
183
Rating
0
P
Printablesjoeworks

Handle for Ender-2 Pro with Filament Holder and Z-Axis stabiliser

I like to have a Z-Axis support for my Ender-2 Pro, keep the handle and move the filament holder from the side to the top to save some desk space. The Z-Axis stabiliser requires one 608 Bearing (22mm).

Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant

Downloads
459
Likes
53
Rating
5
P
PrintablesLaktatbolzen

Gehäuse für Hörmann HSE4 Handsender

Ein Gehäuse für den Hoermann HSE4 Handsender.

Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant

Downloads
399
Likes
13
Rating
2
P
PrintablesMatteo Cristini

Thumb rest for Fender/Squier Jazz Bass (No Drilling Required)

This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
365
Likes
45
Rating
5
P
PrintablesRatasich

Mini Fender for Onewheel XR

There are plenty of fenders out there for the Onewheel XR. Call them however you want – here is my version of a mini fender. Check out my Onewheel Collection – I have also designed a mini fender for the XR with WTF rails , a mini fender…

Print approx. €6.90–€8.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
357
Likes
31
Rating
5
P
PrintablesHondzik

SureFlap tunnel extender

The original tunnel extension is obscenely expensive, but what do we have 3D printers for?! :D

Print approx. €10.18–€12.45 excl. taxPreliminary estimate for one variant

Downloads
345
Likes
13
Rating
5
P
PrintablesSweden3dp

The best ender 3 v3 se Toolholder

This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant

Downloads
345
Likes
97
Rating
5
P
PrintablesTickTock

Onewheel Pint Touch Fender

This is a split fender design with the fenders made very short. I like to ride with my feet very close to the wheel so I designed these so I could easily find the edge of the platform nearest the wheel without having to look down or…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
344
Likes
66
Rating
5
P
PrintablesMichael

Ender 3 v3 KE / SE removable bin mount + spine cable chain base

Combination of Ender 3 v3 KE / SE removable bin & cable holder and lid and Ender 3 V3 SE Spine cable chain - Base

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
344
Likes
25
Rating
5
P
PrintablesNiklavs

Beauty blender case

A threaded beauty blender case

Print approx. €3.90–€4.76 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
47
Rating
5
P
Printablesdumbo78

Renfort Ender3 v3 KE/SE

Pieces réaliser pour corriger l'équerrage et solidifier la structure de la ender3 v3 ke ou se (tres souple). Imprimer en petg pour une meilleure résistance. Pour la réalisation il vous faudra une tige creuse en aluminium de 6mm extérieur.…

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
316
Likes
58
Rating
4
P
PrintablesKendall Unruh

Blink Mini Camera Mount for Ender 3 Max Neo

I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…

Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant

Downloads
298
Likes
58
Rating
5
P
Printablestille

fest sitzender Wassertrichter für Wohnmobil und Caravan - Version 2

Ein Trichter, der beim Berühren mit der Gießkanne nicht gleich runter fällt. Ich habe die Zapfen, die der Schlossdeckel besitzt hier her übertragen. Dadurch kann ich den Trichter durch Drehen fest mit dem Stutzen verbinden. Da man leicht…

Print approx. €5.81–€7.11 excl. taxPreliminary estimate for one variant

Downloads
293
Likes
25
Rating
5
P
PrintablesButtercup

Ender 3 S1 Pro Light Glare Shield - No Supports

I looked for this on here and a few other sites and couldn't find one, so I made it. It stops the glare from the S1 Pro's light from hitting your eyes, and the bed gets the same light as before. The part is too long for an Ender 3 bed, so…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant

Downloads
266
Likes
37
Rating
5
P
Printablesdokurobey

Fan Duct / Ender 3 Pro / Dragonfly Hotend BMS

Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
241
Likes
25
Rating
5
P
PrintablesElectricalBoy

Ender 3 V3 SE Bed Spine Chain Mount

Building on top of Yankeespitfire 's bed chain , this model directly replaces the black plastic cable holder for the bed with the chain end. Chain pieces can get directly attached to this piece. This model only includes the replacement…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
233
Likes
45
Rating
5
P
PrintablesTUS

Ender 3 pro Y / Z axis tensioner 4040 extrusion

Remixed the Y axis belt tensioner from the post below to use with the 4040 extrusion of the Ender 3 pro Remixed the Y axis puller for more belt adjustment Remixed low bearing height that caused the belt to rub on top of the 4040 Y axis…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
219
Likes
27
Rating
5
P
PrintablesRH3D

Semi-automatic bed levelling - Ender 3/Pro/v2 ...

This gcode will do a proper step by step bed calibration with you. You need a 0.2mm feeler gauge or something with the same thickness. The levelling process usually takes few minutes and it includes: Warming up bed to 60°C, homing all…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
212
Likes
26
Rating
5
P
PrintablesThe Alchemist

pencil extender (thread)

print 0.2 layer height of finer tightening the thread will hold the pencil in place assembly see image's, 2 or 3 parts depending on your preference. the end cap slides on the half length and chuck screws on to the threaded portion.

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
19
Rating
5
P
PrintablesPenguinNinja

Avatar: The Last Airbender 4 nations wall decoration

This entire project is 5 parts, a tile of each of the 4 nations and a frame to place the tiles in a grid. The tiles will fit into the grid and stay without help, but using something like super glue is recommended to make it more secure.…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
198
Likes
95
Rating
5
P
PrintablesFrankinator

Ender 3 Z-Axis Support

Just print it in the orientation it comes, unbolt the top rail press it onto the end (you may need to hammer it lightly), then lower it back on over the rod and put the bolts back in. There is also a skeletonised option just because why…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
19
Rating
5
P
PrintablesVedanshG

Wyze Cam V2 Ender 3 Pro Mount

Wyze Cam mount for Ender 3 Pro. I decided to remix "rdprosser's" design and made the pieces slightly easier to print by removing the cable clips. The pieces are calibrated to my Ender 3 Pro meaning that depending on the accuracy of your…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
43
Rating
0
P
PrintablesBlackFury

No Logo & Thicker Motorcycle Kickstand Extender

This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
16
Rating
0
P
PrintablesEnderPrints

Ender 3 V3 SE side mount filiment guide

Side mount for Ender 3 V3 SE Reduces shake due to spool placement

Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant

Downloads
176
Likes
17
Rating
0
P
PrintablesTooMuchCaffeine

Ender 3 Pro Speedy Benchy

My ender 3 Pro -Dual Z -Sprite Extruder -Cr Touch -Light Bar -Klipper on Rpi 4B -X Linear Rail -BTT SKR Mini E3 V3 -Input Shaping With The BTT ADXL345 V2

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
3
Rating
3
P
PrintablesBlechkamerad

Maskenverlängerung / ear savers / mask extender (FFP2 und andere)

Diese Maskenverlängerung erleichert das Tragen von Gesichtsmasken (Covid-19). Sie schont die Ohren und ist angenehm zu tragen. Eine Seite der Maske wird in die Verlängerung geklickt damit beim Abnehmen der Maske die Verlängerung an der…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
168
Likes
14
Rating
5
P

Wattestäbchen / Q-Tipps Spender

Praktischer Spender Für Wattestäbchen / Q-Tipps

Print approx. €5.96–€7.29 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
13
Rating
0
P
Printablesfonzy

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
49
Rating
3
P
PrintablesNoomis

Ender 2 pro spool holder

The standard stock spool holder use a very small diameter. This makes the filament spool move and shake too much. By having a larger diameter for the spool holder, the spool will rotate more evenly and reduce the risk of under extrusion.…

Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
14
Rating
5
P
PrintablesManuelM

Ender 3 PRO Spoolholer nut

This spare part is similar to the original part. Material: PETG Layer height: 0,1 mm - 0,15 mm (recommended). Infill: ≥ 80% Supports: Yes. I hope you find it useful.

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
136
Likes
24
Rating
0
P
PrintablesRealgeizt

MGN12C X-axis adapter for Ender 3 V3 se

For mounting the hotend on an MGN12C linear rail on the X-axis Creality Ender 3 V3 se Zur Montage des Hotends auf einer MGN12C Linearschiene auf der X-achse Creality Ender 3 V3 se

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
15
Rating
0
P
PrintablesNolan Henderson

Ender 3 Neo USB Holder

Ender 3 Neo USB Holder

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
20
Rating
4
P
PrintablesMarsman47

Ender-3 Perfect Bed Level

IMPORTANT: USE THE ZIP FILE ONLY! The print file doesn't work!!! Here are the steps: Home the z axis. Make sure the nozzle just barely touches the bed at every corner. Load up the filament. Start the file. Every time the print pauses,…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
5
Rating
0
P
PrintablesVeracon

CAA Micro Roni Gen4 Bump Stock Extender 50mm

🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…

Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
18
Rating
0
P
PrintablesDrakelees

(REMIX) Ender 3 V3 SE Custom Knob (Ironman Arc Reactor Inspired)

The original model was too small to fit over the printer's cap. I sized it up to 103%, and it's a perfect, snug fit!

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
16
Rating
5
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
21
Rating
5
P
PrintablesSkolno

Koralik Bender

Koralik na šnúrke

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
120
Likes
50
Rating
0
P
PrintablesD-Tecc

TRX-4 Flex Extender

You need one extra M3 Screw + Nut (15-20mm long), one on each side, to complete it. It only works with liftet rear end.

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
27
Rating
0
P
PrintablesFabianR

Edited Inner fender for RC4WD Gelände II D90

die hinteren Fender angepasst. the rear fenders adjusted.

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
112
Likes
3
Rating
0
P
PrintablesOptimusJoe

Radioactive Sign Extruder Spinner Indicator - Ender 3 V3 SE

I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
20
Rating
5
P
Printables5limpickle

Ender 5 Plus TFT35 V3.0.1 Screen Mount

I remixed @Si_Gowla design with tighter tolerances and more attractive aesthetics. It allows quick access to the back of the TFT35 main board. No case mods needed. Filament: PLA Layer height: 0.2mm (knob shroud 0.1mm) Infill: Grid 15%…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
104
Likes
6
Rating
0
P
PrintablesTARUN SURYA

pen ploter with ender v3 se/ke

This is a attachment that turns your ender 3 v3 se/ke into a pen plotter. It clips on to the side of the extruder and requires no disassembly of the printer toolhead. It's fairly rigid and can plot fine details (e.g. printed text) with a…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
5
Rating
0
P

Wattestäbchen / Q-Tipps- und Pad Spender

Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby

Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
7
Rating
0
P
Printablesjamesgt

Toy kitchen appliances #1 - Blender

I created a few kitchen appliances toys model, this is the first part. You can find the raw .stl and the sliced .3mf that helps multicolor prints with color change. If you like it, please buy me a coffee by pressing the “Support designer”…

Print approx. €8.75–€10.69 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
42
Rating
5
P
PrintablesDanny Dowding

storage bin right Ender 3 V3 SE

Decided i needed a storage bin for my printer, Clips onto the side rail of the printer and sits on the desk/table top so hopefully won't break under any weight. Will upload a better pic once i print it out.

Print approx. €50.49–€61.71 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
21
Rating
0
P
PrintablesMartin v R

Ender 3 V3 SE/KE Reverse Bowden + filament sensor mount

Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
16
Rating
5
P
PrintablesIndy

Creality Ender 3 S1 Pro 2-3kg Filament holder adapter (bearings or without bearings)

Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…

Print approx. €9.53–€11.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
88
Likes
16
Rating
0
P
Printablessternli27

Calendar Hook Wallhanger Kalenderbügel

See also my new version: https://www.printables.com/model/1140261-calendar-hook-wallhanger-kalenderbugel-2 Printed in PLA Part is slightly flexible and can be removed to flip the page. Designed in Onshape…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
9
Rating
5
P
PrintablesDarkBruce

Elgato Key Light Air extender

The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…

Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
9
Rating
0
P
Printablesfrodude247

Scion FR-S / Toyota 86 Fender Badge Keychain

A Scion FRS / GT86 / GR86 car badge keychain. Print with PLA or PETG for more durability. Color shift is included in the .gcode at 3mm. Ironing is also enabled to smooth out the top layer. .stl is included if you want to re-slice with…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
86
Likes
8
Rating
0
P
Printablestcarnathan

Ender 5 Plus BTT TFT35 V3 External screen mount

External Screen mount for the BTT TFT35 V3 which gives you access to the usb port and SD card on the screen. If this was mounted inside the control box where the original screen was. You would not have access to the usb port or sd card…

Print approx. €6.04–€7.38 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
5
Rating
0
P
PrintablesMi Ku

Ender 3 V3 SE Side Screen Mount NO SUPPORTS

NO SUPPORTS NEEDED A little screen mount for ender 3 v3 se, best if you have limited space (like me) or this would just seem more comfortable. Personally used it since I printed it, it wobbles slightly but doesn't bother me(if any one…

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
16
Rating
0
P
PrintablesStefan666

N-Scale Roco 25099 crane tender car mount and lift hook replacement

Second hand Roco N Scale crane came without a mount for the beam on the tender , and the hook was missing. Created a replacement , and fdm printable on slow speed. ( might need a few tries ) made to rotate ( use M2 or M3 boult and nut ) ,…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
20
Rating
0
P
Printableszuberio

Ender 3 Extruder Relocation

This print elegantly relocates the Ender 3 extruder from behind the x-axis gantry to the front. This makes the extruder easier to access as well as keeping the bowden tube fully in front of the z frame. This way, the bowden tube doesn't…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
20
Rating
0
P
PrintablesAlpino76

Ender 3 display cover

Printed on an Ender 3 with Cura 5.6.0 slicer.

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
4
Rating
0
P
PrintablesAsPiRe_ FiTe

Minecraft Enderman Wall art

it's an enderman from the minecraft game in 2d for wall decorations

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
15
Rating
5
P
PrintablesMaster Gadget

pre sliced for ender 3 v2 neo

unsliced file coming soon

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
4
Rating
0
P
Printablespaul020559

Plank Bender for Model Ships

Plank bender for wooden model ship builders which cost at least £20 online. The blade is a blunted rectangle of aluminium 25 x 7mm (0.96mm thick) from a piece I had lying around. For those who have never come across one of these it's used…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
15
Rating
0
P
PrintablesScootyBooty

Ender 3 Part Cooling Fan Mount Noctua A4x20

Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
10
Rating
0
P
PrintablesAinon3Dtisk

Footrests for RC car RMT T98 Land Rover Defender

Hello, I have for you Footprints for RC car RMT T98 Land Rover Defender 1:10, 1:12. Footprints have a place for one canister on each side. The canister is also included, which is in the picture. The footprints are slide-on to hold, no…

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
8
Rating
0
P
Printablessikcnt

Ikea MITTLED Ender 3 mount

I found a 300MM led bar and needed a mount for for my 3d printer. This attaches via M4 tee nuts and bolts

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
5
Rating
0
P
PrintablesJoe W

Ender 3 Tool Holder - Expanded for Sovol SV06+

My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
3
Rating
0
P
PrintablesXeRKuS

Ender 3 Pro Logitech C170 Mount

Español: Soporte de webcam Logitech C170 para la Ender 3 Pro. Este soporte está modificado para que no choque con la cama caliente. (Ver fotos) English: Logitech C170 webcam support for the Ender 3 Pro. This support is modified so that it…

Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
2
Rating
0
P
Printablesnoelito

Relocate Screen Mount for Ender 3 V2

I needed more shelf space to put three printers, but the screen made the printer take up too much space width wise. So, I designed this mount to move the screen on top of the printer and right next to the build plate. I made sure the hot…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
6
Rating
0
P
Printablesbeinaendi

VSETT 8 / VSETT8+ rear fender extension

Fender extension for VSETT 8 and VSETT 8+, because without it everything gets dirty, even if it it's not raining. It's a SCAD-model, so if you need a different length or whatever, just message me. I printed it in 0,20mm quality with 60%…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
5
Rating
0
P
PrintablesThe Conqueror

Ender 3v3 SE spool holder with filament stopper

(external) mount for the spool holder to mitigate the Z-Wobble uses the original top mount and its screws (M4x10) so that no additional purchase is required Support=No Infill=15% Tested with 1 KG spool

Print approx. €0.72–€0.87 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
9
Rating
0
P
Printablestarajdactyl

Ender 3 Pro/Neptune 2 Clip-On Webcam Mount

I remixed a webcam mount that was intended for tripod-mountable cameras and made it suitable for use with clip-on webcams. I basically just flipped the webcame platform vertical and removed the tripod hole, since it is now unnecessary.…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
3
Rating
0
P
PrintablesSuperman Bike

Ender 2 Pro Pen and Fan mount

Minimalistic pen and fan mount for the Ender 2 Pro printer. you can use 3dwriter.io to generate the .gcode and let the printer wirte something for you ;) "how long will it take till the kids will let robots do their homework" -my english…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
6
Rating
4
P
PrintablesRaoul

Ender-3 V3 SE Tool Holder for HexScraper

Ender-3 V3 SE Tool Holder for HexScraper

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
8
Rating
0
P
PrintablesIrgendeintyp

Emergency Stop for Ender 3 (Siemens Sirius ACT & Wago Winsta 890-702)

This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO…

Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
5
Rating
0
P
Printablesmanolis

Hole Inset Extenders for "whack a mole CATtoy"

These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in. The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
3
Rating
0