Lenovo Legion Go JoyStick Protector
An aternative to the existing Lenovo Legion Go Joystick Protectors
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
- Downloads
- 403
- Likes
- 39
- Rating
- 4.5
1,047 models
An aternative to the existing Lenovo Legion Go Joystick Protectors
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
The model has been modified to fit the Lenovo IdeaPad 5 16ACH6. Printed on Ender 3-V2 Slicer settings Cura Ultimaker: Nozzle diameter: 0.4 mm Layer height: 0.2 mm Infill: 15% cubic Does not need supports
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
I became aware of the lack of ergonomics when I started studying from home due to the covid 19 pandemic. This is one step to improve my poor neck and head posture.
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
This is a 2.5" HDD or SSD mount for Lenovo All-in-One Desktop Computers. This should fit the following Lenovo All-in-One models: C340 C440 C355 C455 The screws used for attaching are M3 x 4mm.
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Created for LENOVO IdeaPad Duet 3 and stylus 9,5mm Holder was printed with tree suppots. No support for cap. I used Prusament PLA For holder fix on tablet body I use doubleside adhesive tape.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Adapter for lenovo legion go connect
I have designed this for the lenovo M93P tiny but may fit other devices also. To print it either print it flat as on model or place it on the front
Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…
I've been wanting to set up a Tiny cluster using my M720q model computers for a while, and with that have them use 10G networking. It seems that many people do use 10G network cards in these machines with varying success, the only issue…
A stand for the Lenovo Legion 5 laptop that allows you to close the lid
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…
If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…
This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…
I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
Built for my Lenovo Flex 5 14". One of the keys' scissor mechanism broke. I got the measurements off it and modeled this. You can either print everything in place, or split the two bodies and print separately although it is tricky to mesh…
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…
Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
Enhance your Lenovo M90q with this custom-designed 3D case tailored for the RTX A2000. This 3D model file is designed to optimize airflow, maintain compact size, and enhance the overall aesthetics of your setup. The model ensures…
No supports needed, 3 wall lines recommended (although I was successful in printing it with 2 wall lines). Please print the STL as shown (on its side) for the smoothest result.
The model allows you to quickly and easily pack the M720q mini computer into an enclosure to install it on a 10u rack.
A 10 inch rackmount for m910q mini computers. Particularly stable Flat base on the front of the housing Integrated space for housing feet Precise fitting of the housing Clips to prevent it from being pushed out Printing possible without…
Remix of Legion Go Controller adapter and 3d scanned right controller. Now you have both options with one stand you can take anywhere. Add 3 M4 screw to combine and 1 10x2mm magnet for properly FPS-mode work Also you can buy mouse glides
This is a library of baffles that can be used with the different generation of Lenovo Tinys with PCIe slots. These are all designs that I have created to fit a bunch of different cards people use with my Fan Shroud and I include for free…
Made to print quickly and easily with no support. Print Solid, PLA is fine. Only needs 7-8g of filament (2-3m). 6x 5mmx2mm magnets needed (what I already had on hand) 3 on each side. Please remix for other common magnet sizes and if you…
Sound directing adapter For Lenovo Legion Go
Elevate your Lenovo M90q or P340 setup with this expertly designed custom 3D-printed bracket tailored for the XFX RX6400 GPU. This bracket ensures a perfect fit and robust durability, allowing for seamless installation of your GPU without…
Laptop raiser (stand) for lenovo legion 7 and 5 pro, improves ergonomics and reduces temperatures (up to 10 degrees in some cases!) Fits perfectly to legion's rubber feet Recommended print settings Perimeter generator: classic (not…
A replacement keycap designed for Lenovo Legion Y530 to fix broken clip issues. This keycap should fit securely onto the keyboard without any need for adhesive if printed correctly. Printing Tips Fit and Clips : Make sure the clips on the…
This mount was designed for M720q/M920q mini PCs, but should work for any Thinkcentre Tiny with the same form factor. The mount has a seat for the Thinkcentre's rubber feet that keep the computer in place. I have a true 1U rear support…
I printed the baffle using Jessie Premium PLA 1.75mm X Brad's Orange Glitter at 15% infill on my MK3s.
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
Summary Hide your Lenovo dock under your desk or mount it on a wall with these universal Lenovo Dock holders. Compatibility - Does it fit my Dock? Sure, please choose the correct height: 30mm height ThinkPad Hybrid USB-C with USB-A Dock…
About 2 years ago I bought a Lenovo laptop that came with a standard pen and a holder that goes into the USB port. It worked great for storing but the upper hole was too small to fit the pen and hold it upwards when actually using it.…
Wanted a sleek wall mounting option for my Tablet with controls for controlling my smart home automation (Home assistant). This mount allows direct attachment to the wall, as a ultra slim frame for a Lenovo M10 tablet (model TB-X606F).…
This modification allows you to use the Gamesir G8 with a Lenovo Y700 tablet. If you are confident in your first layer adhesion and ability to print 45° overhangs, print with smallest section facting the bed as seen in the image. A brim…
The rack mount can be printed standing on its front side without supports. There are holes on the rear side where threaded M3 inserts can be installed, enabling mounting of the retention clips with M3 screws. For more details, please…
Lenovo Thinkcentre M710t has M.2 NVME port which is on edge of motherboard so if you want to add SSD to it, you have to buy mounting kit which is piece of plastics which snaps to case and provides single screwhole for your SSD. I didn't…
I was inspired by https://www.printables.com/de/model/68785-dock-holder-lenovo-thinkpad I needed a holder for my Lenovo TB docking station. My desk thickness is 25mm. That is to big for the design I found. This is the equipment of my…
The model is symmetrical, so you don't need to flip it, just print 2. While support removal is harder, I've personally found the strength of the joy con side to be much stronger if printed in the orientation shown in the picture. You will…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
If you don't want your Lenovo Gen 2 USB-C dock lying around on your desk, you can use this holder to mount it on the underside. These brackets allow you to slide the dock in and out, holding it securely to the table while still being…
This is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in…
I was never able to find the stylus holder for the Chromebook Duet 5. I made one that will fit the slot in the back cover for the Duet 5. It fits very tightly, so there is very little chance of it falling off. The diameter fits the Lenvo…
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
Made to fit the Thinkpad P16s Gen 2 and the lenovo thunderbolt 4 dock. Should fit the previous dock and also the very common Thinkpad P14S Gen 1,2,3,4. Print instructions: 15% infill No supports needed Can be printed in pretty much any…
A small Stand for the Lenovo ThinkCentre Tiny Series. Nothing more nothing less. _(ツ)_/ Print Settings Printer: Prusa Mini+ Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 Infill: 15% Filament: Prusament PLA Gentlemans…
Changes to the original The original did not fit the 3rd gen tablet. So I made the following changes to make it fit :-) The 3rd gen Tab is slightly thicker The bezels are much thinner The front camera is moved The buttons and charging…
I wanted to get my laptops out of the way (usually piling up on a table somewhere) and so created some fall mount brackets. I needed them to be sturdy, low profile, but also to allow charging when ‘docked’. Print settings: PETG 0.4mm…
Made a simple case that can be printed on the i3. It's not a perfect result, but good enough to protect the tablets. There is significant bridging for the speaker slot and that will result in an area that needs to be cleaned up after to…
This design is for PCs that are in a cabinet out of sight. It uses four #8 Lath Screws with the exact ones being Everbilt SKU 540509. All you have to do is mirror (X-axis) the main piece in the slicer for the other half. Then print two of…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
This laptop stand was designed for my Lenovo Thinkpad (16"), but it will fit for many other laptops as well for sure. Just check the dimensions. The Dockingstation fits perfectly under the laptop, wich makes your desk look cleaner and…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
This is a 3D printable version of the 44T2216 hard drive caddy for IBM/Lenovo xSeries servers. It can hold a 2.5-inch SAS/SATA/SSD drive and fit into the server’s hot swap bay. It has four screw holes for securing the drive and a handle…
I'm going through and CADing up all of the buttons from my Legion Go and decided to make some mods first. I’ve made the D-pad “Stock” in 1 and 2mm taller versions. Along with the D-pad “Pro” in 1 and 2mm taller versions as well. The Pro…
Made a mount specific to the M900 version of the Lenovo Thinkcentre's. For some reason, this version of the mini pc had its feet rotated 90° so while existing models would have physically fit the chassis, the feet would have been in the…
Design is inspired by the one created by Robs (@Minecraft), but this one was made completely from the ground up. Link to that print: https://www.printables.com/model/123191-lenovo-legion-5-gen-6-laptop-stand-support-mount I liked the…
The tablet slides into the holder. Prints in 2 parts, top and bottom, fits on Prusa MK3 exactly, the top part have built in supports as generating supports for it would go outside build plate, just pull them off. Bottom parts prints with…
This is a 10" Rack mount for a Lenovo Thinkcentre M625q Tiny with the measurements 180x183x35mm. Should fit other PCs from Lenove as well. I used print on supports. I set the brush type to trianlge an painted on the overhangs as seen in…
I searched high and wide for a replacement stick for my Lenovo Legion Go that was both easy to print with minimal Supports and comfortable to use. While there are some decent options already out there, they weren't really what I was…
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
This is custom, modular design that allows you to stack Lenovo M920 machines
Lenovo Legion Go monitor stand holds the Legion Go in the back and a portable monitor in the front. An optional OneX eGPU base can be printed instead of the standard foot for a more compact setup with the OneX eGPU. I've tested up to a…
Probably compatible with other Thinkpads
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
I love my Legion Go, but as you may know, one of its biggest points of failure are the locking clips. I searched high and low, and could not find replacements available for sale - 1st or 3rd party, EXCEPT one guy selling a SINGLE PAIR for…
This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…
I wanted to create a print-in-place protector similar to what I've seen out there for the Steam Deck. This has very tight tolerances. Print topside down with supports for the center bit. Once completed, remove the supports then with a…
Inspired by great video from the guy with Swiss accent I've bought Lenovo ThinkCenter in USFF case to be my home server. I've already have my “internet devices” mounted on a wall in my closed so I quickly designed this holder to mount the…
This is the 3.0mm variant of the Lenovo Thinkpad Trackpoint cap. I printed it in TPU. It's a bit messy (being small format TPU) and probably would have printer cleaner on a 0.20mm nozzle, but the end result works GREAT on my Lenovo P1 Gen…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
Created this for the P360 Lenovo Thinkcentre desktop. Needed a mount for an addition M.2 SSD but didnt have a local seller for the Lenovo official kit. The model is designed for printing by SLA, though it can be printed via FDM. Just add…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
This is a remix of this great mount, Remixed to fit 19" Rack, adapted mounts from @Mauker that way you can use his blanks/modular if you only need one mount. There are 2 models 1 with the original back stop 2 without Back stop that can be…
Wall frame for Lenovo Idea Tab 11" (TB336FU) In case you need that both parts are fitting precisely, there are 4 holes for 1mm pin to align it together.
Support pour le PC portable Lenovo 15.6" avec emplacement pour le dock de charge. 15.6" Lenovo laptop Stand with Lenovo dock location. Paramètres d'impression / Print Settings Marque / Printer Brand : Artillery Imprimante / Printer :…
This model is a DIY dock for the Lenovo Smart Clock 2. It allows access to the USB interface on the bottom of the dock for connecting to a computer to access and program the smart clock, e.g. accessing it as a MTP device or to connect via…
ENG: mount a LENOVO M710q or M910q under a table, cupboard or wherever it fits. the nodges fit the rubberfeet, so the PC can't slide out. print the adapter four times. made with Tinkercad. GER: mit vier von diesen adaptern lässt sich ein…
Baffle/PCIe cover for an I350-T2 dual NIC card for a Lenovo Tiny PC. Made specifically for a Lenovo M720Q, but I think it will fit most of the Tiny series. Prints facing down, no supports needed
This file contains the 3D model of a bracket designed to mount a Dell AMD Radeon RX6500 graphics card in Lenovo Tiny 5 models, including M720q, M920q, M920x, and P330 Tiny. The custom bracket ensures secure installation and optimal…
*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…
The Power Button of my wife's Lenovo Thinkpad T570 was broken and get's stuck in the case. So i decided to make a replacement. I printed the button from Nylon. To Repair the Button you have to do following steps. Remove the battery…
English: Lenovo ThinkCentre M710q Expansion Kit" is a multifunctional expansion solution specifically designed for Lenovo ThinkCentre M710q Tiny-PCs. This kit includes a compact housing for the Tiny-PC and a PCI-E expansion card that…
Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…