Ptolemaic Period Jewelry: Euclid's Cypher Ring
Ptolemaic Period Jewelry : Euclid's Cypher Ring.
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
- Downloads
- 270
- Likes
- 101
- Rating
- 0
2,304 models
Ptolemaic Period Jewelry : Euclid's Cypher Ring.
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This decorative lowpoly cactus and pot box can be used as a jewellery display and storage. It prints in two parts with no supports needed. In Prusa slicer i added a filament color change between the soil and the cactus. Note that you may…
Print approx. €3.44–€4.21 excl. taxPreliminary estimate for one variant
My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…
Print approx. €7.96–€9.73 excl. taxPreliminary estimate for one variant
Combo box for earrings and rest of jewallery addons. Earrings wall as separate part for printing in horizontal orientation and passible to usable individually.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
uses 14 screws
Print approx. €10.29–€12.58 excl. taxPreliminary estimate for one variant
A rose by any other name. We designed these fun rose earrings so they could be printed on any printer in multicolor with filament swaps. Size up or down but watch the size of the post hole. We included the gcode of the set, as well as the…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
A compact, 3D-printable jewelry box designed to hold up to 18 items across two organized "floors." The upper and lower compartments provide separate storage for rings, earrings, or small accessories, keeping everything neatly arranged and…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
I use this for my dust collection system. I have used one for several month and found it works great. Four ¼ bolts needed, I used hot glue for lock tight on hinge bolt and to seal the pipes. Hot glue can be removed with alcohol. New slide…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
We wanted a gorgeous gory set for a favorite spooky time of year. Print either the necklace, or earrings or both. The filament shown in pics is “Blood of My Enemies” by protopasta, and it inspired the set. Size up or down but watch the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I made this quick model to support some small weaker plants. Push onto bamboo skewers to form the needed support. I use them in a triangular fashion as seen in the pictures. Intended for round skewers with about 3 mm diameter.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Another necessary costume element for Rumi's Golden Outfit- its the thing that hangs on her belt, whatever it should be called. I saw people use beads and jewelry tools, but this was quick and lightweight. Sized for an adult costume, and…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Heart shaped jewelry dish. Has a curved side to keep jewelry inside. The model prints well in PLA and PETG. It scales really well. Gcode files supplied for PLA scaled all the way up to 300%. At 300% it takes up almost a full Mk4 plate and…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
This is a collection of perles to make necklace and bracelet. => CAUTION : Do not let young kids play with this unattended or they may eat perles and get badly hurt. You will find ball, cylinder and cube perles to make necklaces. You will…
Print approx. €0.41–€0.51 excl. taxPreliminary estimate for one variant
Mit diesem Gehäuse, lässt sich unser Bewegungsmelder Modul 5V, leicht für viele Anwendungen montieren. Die versenkten Befestigungsbohrungen sind für unsere Modul-Befestigungsschrauben M3 geeignet und ermöglichen eine dezente Montage ohne…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Ive included the fusion file if you want to tweak it. G-Code is for a fast print with .6 line width and faster speeds, Concentric top infill and .3 layer height. Its what I used to print mine
Print approx. €5.40–€6.60 excl. taxPreliminary estimate for one variant
Note: I am new to publishing models. Let me know if there is a problem. Tiny bowl with square base for stability to lessen the chance that my cats lose my jewelry. If I am already in bed before I remember to take them off, I can still…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Hello, Today I have for you T oothpicks, canapés, party . Suitable for skewering canapés. Decorates any food. Good for celebrating the new year 2026!!! Good printing! I used PLA/PETG as the material. No need to use supports!!! If you are…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
The motion sensor on my garage unfortunately didn't last longer than 2 weeks until it got fried, eventhough it was IP44 rated and for outdoor usage. Reason was that during heavy rainfall, spalsh water was running down the rough plastering…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
A repair job to a hundred year old stereo viewer that had some missing parts. Here's a vid showing how the bracket is assembled: Except for the handle, all parts print without support. If you found this useful, it would bring me great joy…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
This is a knife block that holds kitchen knives. It allows you to position each knife in whatever orientation you would like and does not limit you to specific slots like the typical knife holders do. This model is pretty long to print…
Print approx. €17.19–€21.01 excl. taxPreliminary estimate for PETGSource material: PET
Shade Cover for Neewer Dimmable 5600K USB LED Video Light One of the lamps still outputs light even when powered down. Something has to be wrong with the switch. In the meantime, I created an insert that would act as a block for the lamp.…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
I'm finding more ways to practice my Fusion skills while getting organized at home. The basic idea here is to sketch a solid body representative of an item that you want to sort in Gridfinity. This model can then be used as a ‘negative…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
A cover I desigend for the generic Jewel 7 LEDs I purchased on Amazon. The holes are aligned for this model of Jewel 7 LEDs with 2 holes to match the PCB that are M2 screw holes. This version allows the wires to exit from the side.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Printed with PLA, on 0,2mm layer on MK4 + MMU3 (won't be needed, also uploaded code for regular MK4 with Input Shaper)
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
An organizer designed in two versions: a free-standing tree and one with a tray base. Recommended print settings: 0.40mm nozzle 0.20mm standard profile 10% gyroid infill Commercial License: You can subscribe for a commercial license…
Simply print the two parts and connect the tree to the base through the slot in the middle. Optionally you can add a bit of glue. Great way to display your chains, bracelets and rings. Depending on your needs you have 3 sizes to choose…
This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my patreon You can also check up upcoming models on my Instagram This is not a Christmas decoration ! more like a…
Super easy printing! The hand is placed on the tapered pin of the tray. You can glue them * if you prefer, but this is not necessary. The bowl is placed on the recess in the hand. Also with this one: If you prefer, you can glue them, but…
With this modern, minimalist organizer, you can neatly store earrings, necklaces, and rings all in one place ✨💍. The design offers plenty of room for your elegant collection. The model is printed in two parts (easy to assemble) and has…
Hello, I made this jewelry box for my girlfriend. So she can store rings, Earrings and other stuff like necklace. I made inputs for little magnets that the Drawers shut in a straight line. You need 16 of these. The original model is…
This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…
This is a stand for placing your glasses anywhere, such as on your desktop. It can also be used to display your favorite glasses. Print Settings Filament: Any Nozzle: 0.4mm Layer Height: 0.2mm or less Support: None…
The Dewdrop Jewelry Tray brings elegance and functionality together in a beautifully minimal design. Inspired by the organic shape of a dewdrop, this tray features two smooth, curved sections, making it perfect for organizing rings,…
A set of floral jewelry. Available with mounting hole at the top of the blossom or included in one of the petals. You can choose from 4 daisy sizes. Dimensions Thickness: petals are 1 mm and 1.5 mm thick the middle is 1.5 mm thick → The…
A simple and elegant jewelry box with lid, available with different compartments and stackable. All you need for the lid is an M3 screw with a length of 6-12mm. I've also uploaded a one-piece version of the lid. Here you can use a color…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
I wanted a little organizer for my hair ties and jewelry, so I made this little low poly tree. Prints with no supports and no extreme overhangs. The tree just slides in the base after printing. 0.2mm layer height PLA I've used these…
This project prints in 40! different pieces, all of which get super glued together. The project is delicate and requires patience and care. It however results in a very, very nice decoration piece.…
Inspired by the elegance of marine life, this Whale Tail Jewelry Holder is a functional yet artistic addition to any space. Designed to resemble the graceful motion of a whale’s tail emerging from the ocean, it provides a unique way to…
Requires "tree" supports, no pun intended. If you break off a limb taking them off then your tree gets even better. SMALL BASE version pictured: Tree supports recommended: Powered by Image-to-3D from MakerWorld…
Allows you to store your jewelry and other small items in style. Required material: printed parts x2. Using PLA as a printing material, the strength of the product is enough to fulfill its function.
As a gift for my gf's birthday I decided to make another jewelry holder. This one's supposed to look like a tree (the pineapple hangers are another gift which I'm going to upload in foreseeable future). I made the tree with blenders tree…
An elegant stand to help organize and hold jewelry of different shapes and sizes. Includes a recessed tray on the bottom for smaller items such as earrings, and the three arms can then easily accommodate bracelets, necklaces, anklets,…
A stand for four small ladies' watches with a bowl for small jewelry in the base. Note: I see that quite a few people use the stand for bigger watches – if that's your plan too, consider scaling the model up considerably. The original…
This is a multipurpose jewelry stand. It prints in six pieces. It is triangulated to be printed in two colors but can just be a single color as well. It optionally uses 2 2x50mm connector pins for increased structural integrity. It has…
This fit 220x220mm bed like ender 3 or bigger. Assembly is pretty straight forward, just remove the support on the tree and slide it into the base.
Printed in Polymaker PolyWood PLA with pastel Polymaker PLA
!WARNING! THE BASE HAS CLOSE TO 0 TOLERANZ! IF YOU WANT AN EASY FIT OR TAKE IT APART YOU EITHER NEED TO GRIND THE PIN (just a bit) OR SCALE IT DOWN TO ~98%!!!
Introduction When I was experimenting with a combination of TPU and PLA, I came up with the idea of printing a kind of fabric and making jewelry out of it. TPU is used here to ensure high flexibility. The PLA is supposed to add some…
Stitch Jewelry Stand modeled by Agouro I resized to 9cm height and rotated to print on the back to get less supports (everything included in the gcode). Post-processing : gesso, acrylic paint and satin varnish for acrylic.
Simple tree jewelry holder. Print instructions Version edited means that stl files have been changed for Prusa MK3/S/S+. All you have to do is download and slice them. Version 100 means the stl files are unedited but they are larger than…
Supports were added to provide stability while printing upright.
The FG 42 is arguably the coolest machine gun ever. This is a 1:1 prop model, with moving bolt handle and trigger. The magazine is detachable. Rubber bands or springs are required if you want operational bolt handle and trigger. All parts…
❗❗❗ PLEASE READ, IMPORTANT INFORMATION ON PRINTING AND ADVICE❗❗❗ A 3D printable jewel case for all your CDs or DVDs. I've had a lot of fun testing this model, and while it isn't flawless , it still works, and I am pretty proud of how it…
This is a .stl and .3mf model of a pickle i created. have fun!.
****FINALLY UPDATED to address lame design flaws**** Added threaded couplers to attach the post and post extension together and the post or extension to the top. If the coupler is too big on your print, scale it down a little in x and y.…
This elegant and functional jewelry stand is the perfect solution for storing and showcasing your favorite adornments. The model features a delicate hand that serves as a display for rings and bracelets, set on a bowl shaped like a lotus…
Introduction This jewelry box has room for 4 trays and is suitable for printing on a small printer such as a Prusa MINI. Instructions Print one of each item (or choose whatever trays you like), except the rails, which must be printed in…
Jewelry Display for chains and ear rings
This a T-bar style jewelry display stand for a single pair of earrings. It can be used at home or to display earrings that are for sale. The stand is four inches high and two inches wide. Printing Very simple to print. No supports, raft…
Ditch the overflowing jewelry boxes and tangled rings! This stunning 3D printed jewelry tree offers a stylish and functional way to organize your collection. Crafted using eco-friendly 3D printing technology, the design features a…
This is a small jewelry box which has the lid securely snap into place. It's quite small by default; I made a bunch at 1.5x scale. The original I derived it from has too round of a fillet at the bottom, so you may want to lower the model…
Liked the original but made it not require supports and the base not need weights by turning the tree's center of gravity no supports .2 layer height
A minimalistic stand for earrings with lots of storage for studs and hangers. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width. Feel free to modify those to…
The Whale Tail Jewelry Holder is an elegant and functional piece designed to bring the beauty of the ocean into your home. The gracefully curved whale tail rises from a smooth dish, creating the perfect place to hang rings, bracelets, and…
A small tray for earrings or rings. And a larger tray for glasses & contacts case.
This is one of my first tries at 3D models. The jewelry stand is somewhat minimalist and reminds me of a castle. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width.…
This geodesic dome was designed to be assembled as a cat/pet house. The dome accommodates a pet bed up to 400 mm (~15.75 inches) in diameter. It was remixed to be assembled using M3 screws & nyloc nuts. While you don't have to print or…
A decent and simple jewelry stand. After printing, only the T-piece must be plugged into the base. For my printer I had to downsize to 98%. The thin arms from the T are not incredibly stable. However, it is always enough for fine jewelry.…
No need for supports. I created a variety of different hangers for different types of jewelry from rings, classic earrings, cufflinks, big hook, Ear Tunnels/Plugs and some blank ones you can modify and remix. Assembly Clean up any…
This ribbed jewelry and bathroom organizer set is certainly versatile. It consists of a tray and a jar with a matching lid. The button is attached to the lid with a small screw. Thanks to the ribbed structure, this set makes a modern and…
Note: New dinosaur and larger versions HERE . Softly curved and glazed in a subtle emossed details, this elegant jewelry dish is the perfect way to store your most precious pieces. Its sleek, minimal lines will bring a touch of…
L'arbre fait environ 13 cm de haut et la coupelle 9.5 cm de diamètre. The tree is about 13 cm high and the cup is 9.5 cm in diameter. Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: impression à plat de l'arbre Les fichiers…
This stencil lets you determine your personal ring size and test if your 3D printer is calibrated correctly in terms of dimensions (X and Y). The sizes on the stencil are ISO (8653:2016) sizes and mean the inner circumference of the ring…
Jewellery Tree ,Hang jewellery from branches ,branches have holes for ear rings etc .Tray for smaller bits .Tree and cat glued to tray.Tray has recesses underneath to add weight ,stops unit falling over.I glued steel into recesses 55mm x…
Files are included for the crown, wand tip, pendant, and earrings. The crown includes hooks inside allowing you to strap it to a wig or headband. Prints without support, I recommend silk PLA. The gem files can be sanded/painted, printed…
Our 3D printable bracelet holder template offers you the opportunity to create your own stylish and functional jewelry organizer. This template allows you to elegantly display your bracelet jewelry while keeping your jewelry collection…
The White Tree of Gondor, with a small tray for you to organize your rings and jewelry.
CD Rack STEP files are for a 15-15-slot model, but the Fusion 360 file can be used to adjust the number of slots in the parameters dialog. This is an initial version and I intend to improve the design. The struts connect via an…
Design Concept The Knight Pen Holder is designed to evoke the strength and honor of ancient warriors, making it an inspiring addition to any desk or workspace. Usage This pen holder is perfect for organizing pens or small tools while…
11 mm stock. Fill with around 30 ml of water. No supports needed.
Display Stand for jewelry, necklaces, bracelets and so on. Print in the orientations used in the 3mf! Parts are pushed together after printing, requieres precise printing.
Can be printed at any scale you want. Base scale is 170x110x40 mm for the base and 170x110x20 mm for the lid.
Dieses Modell ist über Gelenke beweglich und in einem zu drucken. This model is movable via joints and print in palce. Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / Support No Kein zusätzliches Material erforderlich…
Glue the parts together and paint it as you please. Warning! Results with fitment of the pins and holes may vary with you're printer. If you want the best results you should cut the full size sword yourself. Category: Toys & Games
Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…
Print in whatever material and layer height you please. Should scale up well, just make sure scale is the same for each layer, as well as the lid.
Overview Jewelry holder with tray in shape of tree fairy. Print and connect. Printing Printed with Prusa mk2: 0.6 mm nozzle, 0.45 mm layer height, filament: Print-me Ecoline PLA Polar White, Plast-Spaw PLA Gold. Have fun :)
Greaseweazle v4 & F1 Plus Mini Case with space for 3.5" Floppy *added new version of the bottom part that fits a Greaseweazle v4.1 **added new version of the top part with a Greaseweazle logo (add both the logo and top at the same time to…
A nice little tray that can be printed in different sizes. Exclusive Models, Pictures and Commercial License https://www.patreon.com/deltaprints What material do I use for printing? https://amzn.to/46MY70E Watch this thing printing
Thanks to the internal bevel, you can press down on the top corner of any case to pivot it towards you, making it easy to pull it out. The cases, by default, are held at a 10 degree angle, though this can be changed in the STEP file,…
Update 8.3.24: 1. Ich habe die Torführungen überarbeitet. In den neuen Führungen laufen die Tore wesentlich besser. Die Dateien habe ich ausgetauscht (Torfuehrung_rechtsN, Torfuehrung_linksN). 2. Ich habe neue/andere Tore als zusätzliche…
Print the lids with the drawings facing down…
Printed Box, Lid, Tray, and Latches in PLA. Prusa slicer and MK4. Generic PLA. .20 Speed setting. Topfill and bottomfill pattern: Octogram Spiral (esthetics only) Everything else left at default. Printed the Seal in TPU Limited all speeds…
Do you keep forgetting where you've placed things? Is this driving you mad as a hatter? Try this magical cabinet solution today - or your insanity back guarantee! This design is generated from an array of squares whose vertices are…