Search results: exx

Sort order

125 models

P
PrintablesMisha.in

Photo frame Hexxas 15

CZ verze 13 × 18 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 10 × 15 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…

Downloads
462
Likes
136
Rating
0
P
PrintablesMisha.in

Photo frame Hexxas 18 (remix)

CZ verze 10 × 15 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 13 × 18 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…

Downloads
400
Likes
146
Rating
5
P
PrintablesMisha.in

Photo frame Hexxas 21 (remix)

CZ verze 10 × 15 cm , verze 13 × 18 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 21 × 15 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…

Downloads
384
Likes
138
Rating
0
P
PrintablesDavie.BIN

Hexx Case Tool Box

This works with my previous Hexx Case Tool Roll. The additional Grip Lid also does a lot to make recombining containers to be more useful. Features Many of the features are very similar. The most nifty probably being the way it folds open…

Downloads
313
Likes
93
Rating
0
P
PrintablesAngelo

X axis Motor Cover [Bear EXXA]

Bear EXXA motor cover This is a motor cover for the X axis of the Bear EXXA upgrade. The 'PRUSA' logo can be highlighted by printing the insert part with a different color. !! PRINT IN PETG. The heat generated from the X axis motor will…

Downloads
160
Likes
22
Rating
5
P
PrintablesOurAngryBadger

Nozzle Cam for Prusa MK3s / Bear Exxa

I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…

Downloads
86
Likes
50
Rating
0
P
PrintablesThunderArtist

DeepCool Matrexx 50 Mesh Honeycomb Front Panel

Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…

Downloads
83
Likes
2
Rating
0

Thule Yepp Nexxt maxi wall bracket

It should also work for Thule RideAlong, but I have not tested it. Center distance between metal bars is 89 mm. I made two versions, a screw and a bolted version. Screw version: Made for a Ø4 mm countersunk screw with a head diameter of…

Downloads
32
Likes
4
Rating
5
P
PrintablesCwesystems

Schneider Electric Exxact 4-way socket-outlet riser-frame

This is a riser frame for Schneider Electric Exxact 4-way socket-outlet. Part: WDE002488 Frame is 12mm thick, hole is 10mm. Print instructions I printed this in white PETG. Unfortunately the white shade was not correct.

Downloads
32
Likes
9
Rating
0
P
PrintablesTaneli R

Philips Hue Dimmer Switch adapter to Schneider Exxact light switch

Pictures tell the story - use this to nicely integrate Philips Hue Dimmer Switch to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original Schneider Exxact components: Button, part that…

Downloads
22
Likes
2
Rating
0
P
PrintablesTaneli R

Philips Hue Smart Button adapter to Schneider Exxact light switch

Pictures tell the story - use this to nicely integrate Philips Hue Smart button to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original button from the light switch by pulling. Use…

Downloads
20
Likes
1
Rating
0
P
PrintablesDavie.BIN

Hexx Case Tool Roll

After seeing many other container projects, and old products like the Dutch Roly Kit, I thought I'd try my hand at designing my own. I spent weeks worth of manhours working on prototypes and iterations, so please, if you really like it,…

Downloads
3,718
Likes
3,386
Rating
4.18
P
PrintablesShaun Doe

Bear - BearExxa 10mm Z-axis

Instead of using a 8mm rod & bearings in the X-ends, the X-ends have been changed to make use of a single LMUW10 (and thus 10mm rods). No loss of print volume, no custom firmware, it's all fully compatible parts. Oh. And it's usually…

Downloads
442
Likes
77
Rating
5
P
PrintablesAlex

Sherpa Mini for BearEXXA

I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Mini extruder (link to github below). Prints have been…

Downloads
247
Likes
47
Rating
5
P
Printablescjlapao

Hexxagonal Deburring tool holder

Could not find a holder for my tool to keep my shop organized so decided to design one. t does not need any support

Downloads
242
Likes
55
Rating
5
P
Printableshgross

Noctua NF-A12x25 Cover for single 120 mm fan and 360 mm Alphacool NexXxoS ST 30 radiator

These covers can be used to make the beige Noctua-AF12x25 fans blend better into a custom pc build. There are versions for a single fan a full cover for radiators using 120 mm fans - the design is modular a front cover for radiators using…

Downloads
237
Likes
35
Rating
4
P
PrintablesDavie.BIN

Hexx Case Grip Lid

This works with my previous Hexx Case Tool Roll. And with the Hexx Cass Tool Box Features Adds a bit more functionality to the system, mainly that you can connect several of the tool rolls together and carry them as a single container.…

Downloads
220
Likes
72
Rating
0
P
Printablestubeless2276

Prusa MK3/S/+ Bear Exxa Pi Camera Mount

I had a friend that wanted a Bear version of this camera mount, so I got to work editing for the new geometry. This doesn't move the camera too much from it's original position, so it shouldn't throw anything off. This also fixes the…

Downloads
207
Likes
37
Rating
5
P
PrintablesAlex

BearEXXA Delta P V2-R2 for Dragon Hotend

Remix of two wonderful designs to allow for you to fully rigid mount a TriangleLab or Phaetus Dragon SF/HF and also use the Delta P V2-R2 fan duct on the BearEXXA. Any and all feedback is welcome! NOTE: You will need 4 M2.5x5 or 6mm SHCS…

Downloads
194
Likes
33
Rating
5
P
PrintablesRed5

Deepcool Matrexx 70 front panel high Airflow

This honeycomb front panel gives your PC-case higher airflow than the standard glass-panel.

Downloads
176
Likes
11
Rating
5
P
PrintablesShaun Doe

BearExxa MK3(S) LM8LUU Z-axis

Disclaimer: it's a really minor modification, but this is untested . I haven't put this to use myself (I went straight to a 10mm Z-axis in my upgrade/mod-endeavors). Instead of using two LM8UU bearings in the X-ends, the X-ends have been…

Downloads
137
Likes
16
Rating
0

Domino Stand - hexxed out with 7 slots

Domino holder with hex pattern. Fits 7 standing up.

Downloads
130
Likes
15
Rating
5
P
Printablesmarkfrancisonly

Thule Yepp Nexxt Chest Buckle

Chest buckle designed for Thule Yepp Nexxt child bike seat

Downloads
130
Likes
13
Rating
4
P
Printablesunpaved studio

Nexx X.R3R GoPro Mount

Precision-fit GoPro mount designed specifically for the Nexx X.R3R helmet. The mount is attached using 3M VHB high-performance adhesive tape, providing a secure hold even at higher speeds. Printing in TPU is recommended to ensure optimal…

Downloads
122
Likes
3
Rating
5
P
PrintablesRow

Nexx xcom 2 to V6 intercom adapter

I also added blank "slot cover" for helmet and standalone holder for V6 intercom for possible easy remixes for another helmet or intercom (or anything else :). Designed by hand measuring as precise as possible and tested on Nexx Vilitur…

Downloads
121
Likes
6
Rating
0
P
PrintablesMandicReally

Alphacool NexXxos ST30 360 Radiator Mount for v.PC Voron inspired PC

This is an add-on part for my Voron-inspired PC case project: Corvus PC - Voron Inspired PC Case It is designed only for the Alphacool NexXxos ST30 360mm radiator and I cannot guarantee compatibility with other radiator models or…

Downloads
107
Likes
33
Rating
5
P
PrintablesTobias Noremalm

Schneider Exxact Dimmer Knob

Schneider Exxact Dimmer Knob

Downloads
106
Likes
6
Rating
0
P
PrintablesMox Fulder

Lexx Moth shuttle

Model of the Moth shuttle from the Lexx TV series, scale approximately 1:35, for assembly you will need glue and a small adjustment of the parts is also required, the wings and cockpit canopy can be printed from transparent plastic, but I…

Downloads
103
Likes
19
Rating
4
P
PrintablesAlex

Sherpa Micro for BearEXXA

I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Micro extruder (link to github/BOM below). The stock Bear…

Downloads
96
Likes
30
Rating
5
P
PrintablesZakm0n

Hexx Case Tool Roll - TRUE Flat Bottom

For some reason, I had issues getting the "Flat Bottom" print files to work, so I took the STLs in cad and patched up the panels that are dished for the texture. My Voron simply refused to play well with the overhangs. I've only uploaded…

Downloads
95
Likes
10
Rating
0
P
PrintablesH20Slicer

BearExxa Mosquito

I was not content with other extruder designs for Slice Engineering Mosquito hotend so I designed my own. Introducing the BearExxa Mosquito based off of the Bear Extruder created by Grégoire Saunier . Big thanks to both Grégoire Saunier…

Downloads
95
Likes
10
Rating
5
P
PrintablesShaun Doe

BearExxa X-idler (5mm 20T-idler)

This has been made for use with common 20T 5mm-bore idlers with the following dimensions: 5mm bore 18mm flange 9mm width (6mm belt) Changes made to the original the parts: Upsized the bore to 5.04mm, same as the E3D-idler design (from…

Downloads
89
Likes
12
Rating
4
P
Printablesjabbanman

MK3S BearExxa - Stock Firmware

This remix of Gregsaun's BearExxa (Bear extruder and X axis) repositions the extruder to match the vertical position of the stock MK3S extruder. This allows for stock firmware to be used without flashing any calibration firmware. The…

Downloads
88
Likes
24
Rating
4.5
P
PrintablesMarkus

Hook for Bosch Flexxo Vacuum Cleaner

Its a basic hook for a Bosch Flexxo Vacuum cleaner. There was non in the package so i designed myself on. Maybe someone else has the same problem. Feel free and print. I used Prusament PLA but PETG will also work great. I also designed a…

Downloads
84
Likes
6
Rating
0
P
PrintablesAnton Kapibarov

DeepCool Matrexx 50 GPU Holder

GPU Holder for DeepCool Matrexx 50 PC case. Rafts: No Supports: No Resolution: 0.2 Infill: 20% Parts: 2x M3 bolts

Downloads
82
Likes
7
Rating
5
P
PrintablesHijinx

Bear Exxa Phaetus or Triangle Labs Dragon Hotend Rigid no-turn Cover

This is a remix of the Bear Exxa extruder cover that adds a small peg that prevents the Dragon hotend from turning. This is achieved by a the addition of a small peg that locks down into the structure of the dragon hotend and holds it…

Downloads
76
Likes
14
Rating
5
P
PrintablesChriky

NEXX X.Wed3 XCom Adapter to Sena 20s Evo

Adapter for Nexx X-Com 2 Intercom Slot (Helmet) to Standard SENA Intercom This adapter allows you to mount a standard SENA intercom to the dedicated Nexx X-Com 2 slot on your helmet. Designed for a secure fit using 2x M3 screws and 2x…

Downloads
72
Likes
0
Rating
0
P
PrintablesKevin

Flir Exx 25mm Lens Adapter

25mm diameter lens adapter for FLIR Exx (E30-E60) IR cameras. Results in a 2x magnification with a 125mm focal length lens. ZnSe/GaAs lenses can usually be obtained from Ebay for $30-60. Recommended print settings: Perimeter lines: 3…

Downloads
69
Likes
2
Rating
5
P
PrintablesKongolasse

Schneider Exxact with Aqara Wireless Mini Switch

Here are two parts that you can print, I only use the "front" part because the 3 button frame I use is attached to the switches. If you choose to only have the Aqara mini switch with Exxact 1 ram, also print out the "back" part which you…

Downloads
66
Likes
7
Rating
0
P
PrintablesJesterhead

Bear - BearExxa 10mm Z-axis Remix

- Added some space for cheap couplers (Motor Mounts) - Added some Bearing to Top mount - Reduced Guiding in Slot Added remixes guide for Rod from https://www.thingiverse.com/thing:3282965

Downloads
65
Likes
5
Rating
0
P
PrintablesSwesen

IKEA trådfri dimmer exxact

Snaps into the empty frame of an Schneider exxact. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 mm Infill: any Category: Household Supplies

Downloads
63
Likes
8
Rating
0
P
PrintablesdePrintinator

BearExxa Reverse Bowden

Oops Well, I was browsing the repo after I published this and saw there was already an official reverse bowden setup up there. https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/optional_parts/reverse_bowden I'm leaving mine…

Downloads
63
Likes
4
Rating
5
P
PrintablesGMagician

BearExxa 1.0.0 + Revo Six ptfe tube cutter tool

Revo Six needs ptfe tube trimming. This tools is used to trip it. Print parameters are the ones used for original tool

Downloads
62
Likes
8
Rating
0
P
PrintablesMrNeedlemouse

Schneider Exxact sliding cover (for Hue dimmer)

Slide this cover over the Schneider Exxact housing (with the button removed). This enables easy access to toggling power if needed. Printed without supports.

Downloads
62
Likes
11
Rating
5
P
PrintablesCatman

Asus TUF Logo Light Box for Deepcool Matrexx 50

I built a PC using the Deepcool Matrexx 50 case with RGB fans ( https://www.canadacomputers.com/product_info.php?cPath=6_1937&item_id=139452 ) , and noticed there was a large open space on the top of the fan bank on the front. Did not…

Downloads
62
Likes
7
Rating
0
P
Printablesxarbit

Bear (BearExxa) Extruder Cover with FESTO /Tappex Microbarb M5 Fitting

Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…

Downloads
61
Likes
8
Rating
0
P
PrintablesMarkus

Charging cable protection Bosch Flexxo

This is a protection for the charging cable of the Bosch Flexxo vaccum cleaner. It also allows you to charge the vacuum cleaner automatically when hang on my designed hook. I mounted it with a double sided tape. I printed it in Prusament…

Downloads
59
Likes
6
Rating
0
P
PrintablesSchlossbauer

Trinexx

Trinexx. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games

Downloads
54
Likes
11
Rating
0
P
PrintablesPaw85

FLIR Exx Exxbx Tripod Mount

This is a Tripod Mount for the Flir Exx(bx) camera series. There have been complaints that the original tripod adapter accessory was both very expensive ($50) and yet not very stable. Therefore created a cheap and stable version that…

Downloads
51
Likes
3
Rating
0
P
PrintablesMurdockMake

Nexx X.WED3 camera mount replacement

I wanted a lower mount for action cams on the the Nexx X.Wed3 I measured it out so it should fit the bolt and the mounting poinis of the mount included with the helmet. Included is a separated version, so you can better orient prints to…

Downloads
49
Likes
2
Rating
0
P
PrintablesCadel

Rexxar Beastmaster

Lovec Divočiny je detailní fan‑art miniatura inspirovaná legendárním půl‑orkím bojovníkem a pánem bestií. Postava stojí v pevné, bojové póze, oděná v těžké zbroji a vybavená masivními zbraněmi. Drsný vzhled, výrazné textury a robustní…

Downloads
49
Likes
8
Rating
0
P
PrintablesOndrej

Photo frame Hexxas 15 light bottom

Bottom needs 40% less filament.

Downloads
45
Likes
6
Rating
5
P
PrintablesDid Lieb ick

Hexxen 1733 Dice

A Dice for the Hexxen 1733 Pen and Paper.

Downloads
43
Likes
2
Rating
0
P
Printables720 Vending

MMU3 Filament Sensor Chimney Stack for MK3 Bear ExXa Extruder MOD

I printed the model in PETG with 20% grid infil

Downloads
41
Likes
8
Rating
0
P
Printablesn8many

BearEXXA Delta P V2-R2 for Dragon Hotend with Collet

This re-adds the collet from the Dragon hot end back to the mounting hardware. This should help keep the PTFE tube nice and flush against the top the hot end and prevent it from pulling out when removing filament. The collet isn't too…

Downloads
38
Likes
5
Rating
5
P
PrintablesMrNeedlemouse

Schneider Exxact + Philips Hue Dimmer Switch (V2) (no drilling/taping!)

A wall mount for the Philips Hue Dimmer Switch (v2) to use with Schneider Electric “Exxact” light switches. This mount requieres no drilling, taping or any modification to the wall. I created this since I was not sure if I will like the…

Downloads
38
Likes
5
Rating
0
P
PrintablesRagnar

Thule Yepp Nexxt 2 Mini Scott Genius 930 mount

Made this for a coworker so he could mount his Thule Yepp Nexxt 2 Mini seat on his Scott Genius Eride 930. The bike have a wider handle bar which made the original mount too small. Printed in ASA for durability. On my bambu there was no…

Downloads
38
Likes
3
Rating
0
P
PrintablesMinims

BearExxa for TR8 with Anti Backlash

Bear Extruder Motor and Idler part for Chinese TR8 Anti Backlash. Model is for MK3s 1st Version to test. Category: 3D Printer Parts

Downloads
38
Likes
6
Rating
0
P
PrintablesNoah's Prints

Alphacool NeXxos ST30 240mm Rad

1:1 Ratio of the Alphacool NeXxos ST30 240mm Radiator.

Downloads
37
Likes
2
Rating
0
P
PrintablesRow

Nexx xcom 2 to Q8 intercom adapter

I made two variants because I didn't like how the straight variant looks on helmet so I made also an angled variant. With small nipple as a counterpart on intercom for satisfying click and retention. There is also a pocket for USB cable…

Downloads
36
Likes
1
Rating
0
P
PrintablesSwesen

IKEA trådfri round exxact

Snaps into the empty frame of an Schneider exxact. Category: Household Supplies

Downloads
36
Likes
6
Rating
0
P
PrintablesMaksym

USB-C / PD Battery Charger for Flir EXX (E30, E40, E50, E60) thermal camera

This is a USB-C / Power Delivery charger for the Flir EXX E-Series thermal cameras (E30, E30bx, E40, E40bx, E50, E50bx) and maybe E33/E63 meant to replace a missing T910814 charger. Should work with T198487, T199363, T199363ACC 3.6V 5.2Ah…

Downloads
34
Likes
3
Rating
0
P
PrintablesSquibsCorp

Exxon Sign / Plaque

Wanted an Exxon sign for the garage and couldn't find one already made. Printed at 0.2mm layer height, color swap from white to red at layer 6 / 1.20mm, then color swap to blue at layer 9 / 1.80mm.

Downloads
34
Likes
6
Rating
0
P
Printables7VeoG33k

F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro

As the F-Exx 8.0C car fire extinguisher does not come with a mount or fixture i decided to design one to fix the extinguisher somewhere in the car. This is done via a velcro, which is super glued to the bottom of the holder. In addition,…

Downloads
33
Likes
7
Rating
0
P
PrintablesModel Magic

Kid's Art - Lexxy Lion Wants to Play

Kid's Art - Lexxy Lion Wants to Play 3D printable model.

Downloads
33
Likes
5
Rating
0
P

oprava nádobky vysavač bosch flexxo

na nádobce se mi ulomil zobáček který drží zacvaknutou nádobku na odpad, sundal jsem originalni stitek bosch a nahradil ho stítkem který má na sobě zobáček takže nádoba nyní opět drží nádobka na prach se dá koupit celá pod číslem bosch…

Downloads
32
Likes
3
Rating
5
P
PrintablesColbyS

Bear Exxa IR filament sensor bowden M6

This is model is from two different remixes from different versions of Bear X-Axis and Bear Exxa assemblies. I took parts of two remixes and combined them to make it work for the Bear Exxa 1.0.0. Works great! Feel free to remix this to…

Downloads
31
Likes
3
Rating
0
P
Printablesdaggr

Tradfri adapter for Schneider Exxact

For mounting IKEA TRÅDFRI On/Off button in Schneider Exxact frame on top of a existing lamp button. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.3 Infill: 25% Filament: Clas Ohlson PLA White…

Downloads
31
Likes
2
Rating
0
P
PrintablesQuickset45

DeepCool Matrexx 50 GPU support Bracket

Specifically for use in the DeepCool Matrexx 50. Use two case screws to attach the bracket through the SSD drive holes location as shown in the pictures. Its a good case for the money, but the screw holes strip out easily, and the back…

Downloads
29
Likes
4
Rating
0
P
PrintablesJ0K3R

Nexx XCOM Mount for LEXIN LX-B4FM

This mount is designed to securely attach a Lexin Intercom B4FM to a Nexx Y.100R or compatible Nexx helmet. It combines two existing designs into one refined solution, offering a snug and stable fit — no more unreliable clips or adhesive…

Downloads
27
Likes
1
Rating
0
P
PrintablesFabian Wandtke

Thule Yepp Nexxt Mini Halterung Slimfit Adapter Bracket

I lost the plastic brackets of one of the SlimFit Adapters to fit on thinner frames. So i remolded it. Enjoy! You have to use supports. Tree supports worked quite good.

Downloads
26
Likes
1
Rating
5

Flir Ex E4, E5, E6, E8 and Exx Series E53, E75, E85, E95 Tripod Mount Adapter

This is Tripod Mount Adapter for the Flir Ex and Exx series. It straps to the handle with a piece of double sided velcro. This fits: E4 / E5 / E6 / E8 E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.

Downloads
24
Likes
0
Rating
0
P
PrintablesVertigoMakes

Bearexxa V1 REVO Cover for Revo 6

This Extruder Cover uses the cavity at the base of the Revo 6 to prevent the hotend from spinning, and also prevents heat from the heater core from escaping into the cooling area. For bearexxa V1, and also a version for the delta p bear…

Downloads
23
Likes
5
Rating
5
P

Mini TorchBlueXXL Base

Just a simple base for a mini TorchBlueXXL to keep it upright and findable on my messy light table. Print Settings Printer Brand: Creality Printer: Ender 5 Supports: No Resolution: .2 Filament: Any PLA Category: Tool Holders & Boxes

Downloads
22
Likes
3
Rating
0
P
PrintablesbOesu

BearExxa Mosquito (BEM) body modified for PTFE tube

While using the original model for a few hours of printing, I noticed that the PTFE tube slowly moves upwards because of the retractions and inevitably gets caught by the extruder wheels. The tube is afterwards damaged in such a way that…

Downloads
21
Likes
1
Rating
0
P

závěs tyčový vysavač Bosch flexxo

věšáček do technické místnosti na vysavač bosch flexxo. nejdříve namontujete závěs a po zavěšení vysavače si najdete vhodné místo pro montáž držáčku kabelu takže už nebudete muset ručně připojovat kabel, jen zavěsíte vysavač a kabel se…

Downloads
20
Likes
0
Rating
0
P
PrintablesJustic3D (j3D)

Fortnite Inspired Rexxer Dino Plushie

Have you also fallen in love with the plushies in Fortnite Chapter 7 Season 1. I am infatuated with these guys right now and had to recreate them! Here the Dino inspired plushie ◡ Supports are recommended! None of my files are ready for…

Downloads
19
Likes
7
Rating
5
P
PrintablesTechButterfly

8mm Endoscope Rear Mount for Bear Exxa Mosquito Carriage

Update May 3, 2022: I recently tried printing an object that completely filled the print bed of my bear Prusa and discovered that this endo mount hits the power supply at the extreme X axis position. It's fine for prints that don't go…

Downloads
19
Likes
2
Rating
3
P
Printables3DFoundry

Bosch Flexxo Gen 2 Series 4 Replacement Clip

Replacement part for Bosch Flexxo Gen 2 Series 4 – fixing one of the most common weak points that tends to break. 🔧 Designed for a tight fit and improved durability, so you don’t need to replace the whole unit. ♻ Quick and easy to print,…

Downloads
19
Likes
3
Rating
0
P
PrintablesBlazinfatherted

Exxon logo for office \ workshop

Exxon logo for office \ workshop

Downloads
17
Likes
3
Rating
0
P
PrintablesMrMaKr

Bear X-End Motor with bearing holder (BearExxa 1.0.0)

You will need an additional 625RS or 625ZZ bearing. It is not possible at the moment to add mor things to the remix sources, so i have to link them here manually. This thing is a remix or inspired by the following things:…

Downloads
17
Likes
3
Rating
0
P
Printables139robo

Drziak bosch flexxo serie 4

Drziak vysavača bosch flexxo serie 4. Keďže vysávač neustále padal, tak som vyrobil tento jednoduchý držiak.

Downloads
16
Likes
2
Rating
0
P
Printableslingeswaran

Filament Spool for FLEXX3D Printing – 3D Printable Spool (Plan Version)

This 3D printable filament spool (plan version) is specially designed for use with FLEXX3D filament refills. It allows users to print their own durable and reusable spool, making it easy to use refill packs and reduce overall filament…

Downloads
16
Likes
0
Rating
0
P
PrintablesMishuuu

MGN12H Bear Exxa Titan adapter

an upload of my Thingiverse upload thing:5920110 this is a combination of Bear Titan Extruder MK2.5S by TimeWalker75a ( https://www.thingiverse.com/thing:4533682 ) and Full Bear MK3 X/Z Lineal Rails MGN12 by DanielSan_84 (…

Downloads
16
Likes
1
Rating
0
P
PrintablesHW

Adapter plate for Bowers & Wilkins 705 S2 on Atacama Nexxus Essential 600

This adapter plate allows fixing the Bowers & Wilkins 705 S2 to the Atacama Nexxus Essential 600 by using 4 pcs M6 x 25 screws. Printed on Prusa Mk4, 0.2mm structural, Prusament PETG, 20% Gyroid infill

Downloads
15
Likes
0
Rating
0
P
PrintablesSergey

BearEXXA-compatible MK3S carriage

This version of the X carriage changes belt alignment to make it compatible with BearEXXA. It allows to use the original MK3S toolhead on a printer with BearEXXA X axis mounts

Downloads
15
Likes
2
Rating
0
P
PrintablesBentiGorlich

HeXXen 1733: Idee token

A 10x10x3 mm idee token for the ttrpg HeXXen 1733

Downloads
14
Likes
0
Rating
0
P
PrintablesRene

BearExxa Filament Sensor Cover with LED

Changed the filament sensor cover so that an LED behind it shows the status of the sensor. The side walls of the recess are slightly bent to avoid pushing through. There are two versions of the window insert available. The smaller one fit…

Downloads
14
Likes
2
Rating
0

Bear EXXA idler for long rods

Didn't want to cut the rods I was using so edited the Bear exxa STL

Downloads
13
Likes
1
Rating
0
P
PrintablesJohanÄ

Exxact_tradfri_onoff

Remix for new on-off or up-down tradfri switch

Downloads
12
Likes
1
Rating
0
P
PrintablesBentiGorlich

HeXXen 1733: Coup token

A 10x10x3 mm coup token for the ttrpg HeXXen 1733

Downloads
12
Likes
0
Rating
0
P
PrintablesBentiGorlich

HeXXen 1733: Rage token

A 10x10x3 mm rage token for the ttrpg HeXXen 1733

Downloads
12
Likes
0
Rating
0
P
PrintablesGregregorovich

Gasket for 2x 92mm Noctua NF-A9 NexXxoS Alphacool Radiator

Ensures no air is pulled (or pushed away; pull has almost negligible additional performance, apparently) from the ~1mm gap between the radiator and the fans when using Noctua's anti-vibration mounts. Also includes a further 4mm gap for…

Downloads
12
Likes
2
Rating
0
P
PrintablesDaTePrisa

BearEXXA extruder body - Dragon screw holes & PTFE

I wanted to be able to use my cheapo v6 hotend for one hand nozzle swap, but the screw heads were colliding and the PTFE was not secured. Currently testing, use at your own discretion I bear no responsibility! Credits to Greg Saunier for…

Downloads
12
Likes
2
Rating
0

Alphacool NexXxos Hepta fan shroud for large format printers

This is a WIP, but a multi piece print to make a 90 degree air duct for a water cooling radiator solution for hot-environment printers. 350mm bed size minimum for printing. You probably shouldn't make this, because right now my response…

Downloads
12
Likes
2
Rating
0
P
PrintablesLuis Diaz

PC4-M10 ptfe bear extruder bearexxa adapter

A mashup model to add a PC4-M10 ptfe to the bearexxa extruder

Downloads
11
Likes
0
Rating
0

Flir Exx Series E53, E75, E85, E95 Thermal Camera Lens Cap

This is a lens cap for the Flir Exx series handheld thermal imaging camera This cap should fit: E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.

Downloads
11
Likes
1
Rating
0
P
PrintablesAsad Sledka

Anbernic RGCubeXX ScreenSaver Cover Shield Stand

Use a higher Infill percentage for a sturdier print. I printed at 100% infill (I would recommend at least 50% Infill) with Supports everywhere and it printed great. Printed in PLA, 100% Infill, Support Everywhere. Perfect Fit version has…

Downloads
11
Likes
2
Rating
0
P
PrintablesNitchy Itchy

Sexxi Batman. AMS required

Printed on A1 mini with 0.2 nozzle, arachne wall generator. You can try to print it with 0.4 but it needs scaling.

Downloads
10
Likes
3
Rating
0
P
PrintablesMarco Adami

Nexx x.wrl helmet sunlight peak extensor screw holder

This is a remake of the peak extewnsor screw holder. I lost mine so I remade it. Print at 100% infill and put an m3x5.7x5.0 brass insert. The screw is am m3, 8mm long. Print it like the fusion 360 preview image. I printed at 0.2 in black…

Downloads
10
Likes
0
Rating
5