70 models
Das Model testet den Einsatz von Input Shaping Damit ich eine schwarze Magnet-Werkzeugleiste in der Küche verwenden kann, habe ich eine foliendünne weisse Hülle gedruckt, mit der ich die Leiste verkleidet habe. Sie dient jetzt als Messer-…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
First layer calibration GCODE for Prusa printers, as implemented in Prusa MK3/MK3S firmware ( https://github.com/prusa3d/Prusa-Firmware ), originally created by Marek Bel. Enclosed GCODE files are generated directly by the firmware source…
hi! I've build one because, it's impossible to find one who works correctly. The firmware is in french, V2 probe and for A4988 or TMC2208 steppers drivers. Just invert the steppers rotation for A4988 drivers. the z probe offset is easier…
Don't forget to hit the like button if this helps you :) Improved calibration prints with minor modification to connect all the printed squares for easy removal from the bed. (uses a 0.4mm line width) These prints work seamlessly with the…
Kp3s is a lovely printer but it is alarming how bad the firmwares found on the internet are - even the one from official website.. So I have decided to upload this marlin config for kp3s v3.. Because every config found on the internet is…
***Custom Firmware for SUNLU T3 based on Marlin 2.1.2 bugfix January 2023*** *** Added the Source Code from SUNLU to “other Files”*** No USB functionality! Since I don't use USB I didn't test this, but was told it doesn't work. Will check…
Labists ET4 firmware!! Was a pain to find, had to go to Facebook and message a support guy. So here it is!! https://drive.google.com/file/d/1wXhCY1h7tXundF53bnfL9ESNWKrbd4Bc/view?usp=sharing Category: 3D Printer Accessories
Want to get even more accurate? Or see how accurate your 3x3 mesh is when printed in a 5x5 mesh? This is a 5x5 mesh you can use following the original instructions from the original model at the link below and its optimized to work with…
Copy of Marlin firmwares for Anycubic Mega Zero V1 that I usually publish at GitHub For flashing instructions and details, please check Wiki Print instructions Category: 3D Printer Parts Summary Copy of Marlin firmwares for Anycubic Mega…
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
I've shortened the model a bit (so that the build plate can be placed on the edge of the vat, instead of putting it inside), and enlarged its height by around 4mm so that users with new FW won't have to do anything apart from installing…
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
Links to the Required hardware: Mks nano v1.2 Board + tft 35: https://a.aliexpress.com/_EQSJ0yN A4988 drivers: https://a.aliexpress.com/_EwGs2gV Z axis splitter: https://a.aliexpress.com/_EvYdWGd
Want to torture yourself further? Want a beyond great first layer in every part of the bed you can get? Or maybe your build plate surface is more like a gravel road? Well then this is the print for you :) This print matches a 9x9 mesh…
⚠ Disclaimer This firmware is provided "as is" without warranties. The user assumes all responsibility for installation, operation, and consequences. It is not a commercial product and has not been tested for all scenarios. Use at your…
(Proximamente - en Prueba) Version 3 Cancelación de objetos( funcion necesaria y requerida para quienes hacen llaveros y muchas piezas en cantidad). Firmware Magna SE Pro - Version 2. En esta versión se corregio el Z Probe Wizard (Traming…
This Hemera mount is compatible with the Prusa MK3s X-Carriage. A lot of mods require a "downgrade" to MK3. You will need to reverse two of the screws that connect the X-carriage and the Hemera mount. Use the modded fan shroud and PINDA…
This Gcode is the original G Code but in this one it scans for the bed QR Code Then it does a Home Check so that if it doesn't see the QR Code it PAUSES asking for BED or Continue, IF you add the plate IT NOW SCANS that Plate and then…
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…
A very basic Direct drive mod. Just take off the hotend fan, hotend, and pom wheels, attach it, and cut down the bowden tube. At most youll need a extension cable for the extruder motor, Im getting three for $9 (which is why all those…
Longer Lk1 / Alfawise U20 Firmware Marlin 2.0.8 Firmware que criei para a minha Longer Lk1 com o ultimo marlin e algumas modificações. Firmware that I created for my Longer Lk1 with the last marlin and some modifications. Print Settings…
This remix of Gregsaun's BearExxa (Bear extruder and X axis) repositions the extruder to match the vertical position of the stock MK3S extruder. This allows for stock firmware to be used without flashing any calibration firmware. The…
I Reupload the Marlin Firmware for Ortur Obsidian Firmware from FiveNights. Seprat Dowload Link (mega) : https://mega.nz/file/OBt2DRDQ#C3d0SHPsjsh9Uca4wbUyofAKsv48Xuf8ZZ_ATNihnnY i use the frmware to day and its work and fixet my problems…
I've printed one in PETG and it's working fine.
Eine angepasste firmware für den Anycubic chiron
Loved this model so much I wanted more…… ( Thank you Jéjé l'ingé @Jejelinge_724355 ) So I added: Sound Module to play the famous movie clip audio Barrel plug for power on the back side rather that side These are the items I used to make…
Update: 2024.03.31 Upload Extruder Motor Plate print part.(missed on first laungh) First Laungh Introducing our clone upgrade kit for Original MK3/MK3S/MK3S+ or other MK3 serial clones. Inspired by MINI firmware 5.1,renowned for its…
If you have a problem while testing the Y axis through the Prusa checkup, try using this part Recommend to put it on the front Hope to help you all
Download the firmware The firmware is available in our GitHub repository If you want to support us just download the attached STL and press the like button. What is included on this release? Firmware base is the 3.10.1 version from…
I have developed a motor controller for the IKEA Fridans Blind. But you can also control any other stepper motor with it. I found the motor bracket on Thingiverse (https://www.thingiverse.com/thing:4889111). I designed a case that…
This added file is a mix of the Marlin Firmware for the Anycubic Kossel Plus, and added modifications from the firmware of FLSUN kossel. Anycubic not update the editable firmware, and in need levelling the printer correctly. The more…
Upgrading Anycubic i3 Mega/Mega S with Marlin 2.1.x The Anycubic i3 Mega offers great print quality out of the box, but there’s always room for improvement! I recently upgraded its display and controller and installed the Marlin 2.1…
Firmware files and printing files I used to get my Ender EZ Belt up and running in 2025. See the main page as the linked remix. There are no model files, but Printables does not allow just firmware file uploads, so the firmware, IdeaMaker…
Hi, im sharing with you Printer.cfg for my Anycubic Mega Zero 1.0 (it should work with 2.0 also) Please like and write comment or even create make to support me! The Printer.cfg file is in Other Files section It is configurated to work…
What this is for This project fixes XY skew in prints caused by small mechanical misalignment in Cartesian and CoreXY printers that don't support Marlin's M852 skew compensation (such as Prusa Printers). Even well-built calibrated…
The Z-Tops are 2mm higher than the originals. This is enough to pass the Prusa Z-Calibration test. I have 322mm long Z-Rods installed, these fit exactly between these Z-Tops and the motor mounts. If you only have 320mm long rods I would…
Für meine Schul AG habe ich aufwändig komplette Orca Slicer Profile erzeugt, welche theoretisch ohne Limit auf allen Druckern nutzbar sein sollten. Es macht allerdings keinen Sinn sie unverändert auf anderen Druckern zu nutzen, es ist nur…
Links to materials: Pogo Pins - http://ali.pub/41pr3b Spring Contacts - http://ali.pub/41m8l8 Nuts m2 - http://ali.pub/41mat5 Bolts m2-8mm - http://ali.pub/41mdqc Bolts m3-10mm - http://ali.pub/41q9jj Prototype PCB - http://ali.pub/41mfax…
This is a case for a MAX7219 LED matrix display, the one I used: Amazon US: AMZ3D Black PLA:…
When you update the firmware, you have to pull everything apart. I made this little snap in place holder that allows you to access the port through a cooling vent on the right-front. Allows you to use a common microSD to SD card adapter…
More about the project you can find here: Technoethical Firmware Flashing Starter Kit - Technoethical
Enhance your Modix V3 or V4 with our custom adapter plate, designed for seamless integration of the MantaM8P board with a CB1/CM4 module. To ensure optimal compatibility and performance, replace the existing 25mm standoffs with 4-7…
Use case Who needs a thermometer that is accurate to +-0.1°C and a hygrometer that is accurate to +-0.5% on relative humidity? I cannot answer that question, but I know that some years ago such a devices would have been insanely expensive…
Here's an upload of my Ender-2 Firmware Files for use with a BLTouch. I've also included the .STL for the BLTouch mount . Git Repo Code base at sourcehut Category: 3D Printing
This DualDrive Extruder is mounted as direct drive with V6 hotend. The Tronxy X5S' original metal X carriage is kept to ensure the ridged hotend installation. Though, need to drill 6mm hole for the stepper axle if direct drive…
Core One Custom Firmware Over the last few weeks I've been working on a few features that I personally missed on the Core One. This firmware is the result of that work. What's Included Themes & UI Custom themes with your own color choices…
A great amount of effort and time went into the design, testing and troubleshooting of this thing! Please be so kind and consider leaving a tip if you decide to print and install this and share a make of your results. Advantages of this…
For the upgrade of the Artillery Sidewinder X1, you'll need: 1.) Bondtech Extruder BMG right 2.) E3D V6 Hotend 3.) 3x M3x35mm screws or (alternatively) 3x M3x40mm with washers 4.) Radial fan 50x50x15 24V [Recommended]: titan heatbreak,…
This is a multi modification for Eryone ER-20 printer consists of: Z axis syncronisation with closed loop belt LED lightning to the printer Updated Firmware with improvements Eryone is using double Z stepper motors but only one stepper…
This is an adapter for cutting the connection between TFT display and mainboard allowing to flash the firmware without issues and without having to unplug the cable each time on the Artillery Sidewinder X1. The DIP switch can be reached…
I have a couple of Original Prusas so I'm very used to do first layer calibration with pattern available on the firmware, so when I built a MK2 using Marlin on RAMPS I wanted to use the same tool for calibration, so thanks @jonnieZG for…
!!! I have purchased 2x more Up Plus machines and one of them has slightly different (wider) hotend mounting point, if you have one of these please bare with me while I'm amending mounts to fit this variant. If you have 3rd variant or so…
So I had the problem, that my Prusa i3s sled was slightly bend and the original z probe holder was too far away from my nozzle. So the nozzle crashed into the bed continuously. I designed this thing to get the z probe holder closer to the…
I'm looking at putting ReprapFirmware on my Hypercube 300. The necessary adapter to connect its Raspberry Pi Zero 2 W to its SKR Pro 1.2 is out-of-stock on Tindie. This is a smaller adapter that does the same thing, only it plugs into the…
This is a zipped folder with marlin firmware for a Maker Select V2 (also known as Wanhao Duplicator i3) with a ramps gen 1.4 board. Here is the kit I used:…
Skirt and TFT50 screen frame with an optional SD card remote reader for updating Firmware. These parts are designed to fit and blend with the original Voron 2.4 skirts. Parts Used: BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display Micro…
Prusa XL – Nozzle Wipe Upgrade with Replaceable Wipers Automatic nozzle cleaning before every print – without modifying the start G-code! Since firmware version 7.0.0, the Prusa XL has natively supported the Nozzle Wipe function. This…
Remix with rounded corners and German Text Category: 3D Printer Accessories
Based on the work from https://www.thingiverse.com/thing:5437453 Added a bracket for 2x 5mm LED bulbs in-between the minute and hour. Bulbs wire to the ESP chip. Here are the features I've added to the ESP firmware. -Using an ESP-12F…
This is a 3D-printed docking station I designed to help flash and recover the Samsung Gear S2 SM-R720 by providing stable access to the watch's internal connection points. I originally created it to recover my own Gear S2, which needed to…
A ring of small pillars where every gap gets its own retraction length, in one 16-minute print. Look at the ring one gap at a time: the first clean gap is your retraction length. Works on every firmware, with no profile changes and no…
Hi, im sharing with you Printer.cfg for my Anycubic Mega Zero 1.0 (it should work with 2.0 also) Please like and write comment or even create make to support me! The Printer.cfg file is in Other Files section It is configurated to work…
Based on the work from https://www.thingiverse.com/thing:5437453 Added a bracket for 2x 5mm LED bulbs in-between the minute and hour. Bulbs wire to the ESP chip. Here are the features I've added to the ESP firmware. -Using an ESP-12F…
What this is for This project fixes XY skew in prints caused by small mechanical misalignment in Cartesian and CoreXY printers that don't support Marlin's M852 skew compensation (such as Prusa Printers). Even well-built calibrated…
Loved this model so much I wanted more…… ( Thank you Jéjé l'ingé @Jejelinge_724355 ) So I added: Sound Module to play the famous movie clip audio Barrel plug for power on the back side rather that side These are the items I used to make…
I wanted to incorporate the original Prusa enclosure electronics into my $129 enclosure design. This way, you will have the best of both worlds! The first step is integrating the original alveo3d filtration system into the enXLosure. It…
![Elegoo Neptune 4/Pro OrcaSlicer V2.0.0 config [New Firmware]](https://media.printables.com/media/prints/609896/images/6512090_0000f0c6-71c5-412c-915d-776f786325d3_f907e120-f93d-475e-8798-5d4567f5e812/banner-orca-slicer.webp)
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware]](https://media.printables.com/media/prints/104767/images/1049067_18c18458-fa9e-4654-902c-b1e97a049d27/4c891d12cf05afc76616116d7b423361_display_large_10.jpg)
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware] for *Non Prusa Firmware*](https://media.printables.com/media/prints/575264/images/4597975_7ff1d44e-c928-48df-8894-60c77bd012c9/whatsapp-image-2023-09-06-at-144700.jpeg)
