The source marked this model as adult content.
- Downloads
- 631
- Likes
- 56
- Rating
- 0
1,229 models
Simple lateral flashlight holder for picatinny rail. This mount allows the user to turn on/off the light using the index finger without need of a special torch switch. In the picture was mounted a 25 mm diameter torch on an airsoft…
English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…
A Picatinny Mount for a tiny flashlight. (13mm diameter) I also included a version for 14.5mm diameter, to hold on to the wider front part of the flashlight. It was made for the MecArmy X2S flashlight. Additional hardware: 2x M3 nut 1x M3…
I thought it would be a fun project to make, so I created a flashlight holder, but for the internal part of it, so that it can dry easily after cleaning. There are two parts that can be printed separately or together: clamp and ring. They…
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional This model is a simplistic flashlight that can be added to a keychain. A CR2032…
I was attempting to design a simple flashlight using conductive filament with the goal of being entirely printed (just add batteries and bulb) with a single extruder 3d printer. After several iterations with limited success ( see here ) I…
Update: Success! Feel free to continue below for perspective on this project, but there is now a working model on Printables here . I was attempting to design a simple flashlight using conductive filament with the goal of being entirely…
These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…
Holds up to three flashlights: Fenix PD35, Olight H2R Nova, and Olight Arkfeld Pro. Also fits a chapstick or other AAA flashlight. Bin was generated using the Gridfinity Generator at https://gridfinity.bouwens.co/
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
I designed an undermount flashlight for the popular Glock Fidget Keychain – 3D-Printed Mini Slide-Action Toy by Rectangle It simply slides in from the front and is friction fit. The lens must be superglued in place if you choose to use…
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
Small LED torch to always have on hand or on your keychain to always have a light just in case. VERY SIMPLE TO PRINT AND ASSEMBLE PRINTING INSTRUCTIONS: MATERIAL : PLA/PET-G NOZZLE SIZE : 0.4 mm LAYER HEIGHT: 0.10 / 0.15 mm VERTICAL…
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
Pro-flashlight from the Lethal Company. It's really just a regular flashlight with the lethal company skin over it. Functions as an ok actual flashlight, would not recommend going to Titan with this. The backyard is fine. Assembly…
A compact underbarrel flashlight add-on for the G26 Fidget Keychain, designed to give your slide-action toy a more tactical look. Simple to print, easy to assemble, and fully compatible with the original model. No glue required…
This is a single pice flashlight mount for picatinny. it is compatible with 21mm wide flashlights but was designed for the single mode WAYLLSHINE flashlights. The mount can be locked in place on the rail using 1 or 2 3/8" 4-40 screws but…
Simple mount that clips onto top prop guards. Designed for Rovyvon A1 flashlight (same lights used by OriginalDobo mount for Avata 2--an excellent design, BTW). Weight less than 2g, with light less than 19g.
Mount for a Nitecore EC20 flashlight (21mm diameter). You will also need: 2x M3x30mm bolt, 2x M3x12mm bolt, 4x M3 nut
This is a flashlight mount for the Steambow AR6 Stinger II crossbow. It fits the Steambow 19mm flashlight and laser to the lower picatinny rail in front of the vertical front grip. This position allows you to access the power buttons…
This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…
It is a mount for a 24mm diameter flashlight and a 32mm diameter handlebar. Additionally required: 2x M5 15mm screws 3x M5 hex nuts 1x M5 12mm screw with a round head
d6 Turnkey size, mm 10
I needed a holder for my Duracell flashlight (42mm diameter) and my UV flashlight (56mm diameter) for the honeycomb storage wall I printed. I have included the stl files for the 42mm and 56mm flashlight holders I needed as well as an scad…
This mount attaches to the rails on a Nerf gun and can hold a flashlight. In the Picture, you see a Thrunite T10 mounted to a Nerf Elite 2 Commander RD-6. You can easily customize the mount with a set of parameters that are included in…
This is a quick remix using Rod's Skadis base (thanks!). I found that none of the models out there were a great fit for my flashlight, either being too large or too small. The inner diameter of this compartment is 30mm, and compartment…
I used the “Staff” model from the accessories to make it, a pretty simple flashlight to illuminate the Dummy 13 halls.
You can buy these diffusers from me here! If you like our models, consider giving us a 1 time donation! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize…
A handy little clip/holder that is small enough to leave on a compact EDC flashlight, but is there for when you need hands-free light. The design is fully parametric so you can customise to fit your combination of spectacle frame and…
Attacchi torcia vari per avere sempre una torcia sulla slitta picatinny Si monta con SINGOLA VITE M4x30
Helmet Flashlight mount for Airsoft diameter of the light aperture 28,5mm material PTG
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5 Few things that you need to know befor start printing: there are 2 types of diameter of…
Double Flashlight Holder for the Wrist (Star Trek: Voyager) Do you remember the "cool" double beam flashlights from the TV series Star Trek: Voyager , which are attached to the wrist? Well, why wait until the 24th century? This 3D model…
I wasn't satisfied with the other available Maglite holders I found on Thingiverse, so I decided to design my own. It's a quick design made in Tinkercad, and with the settings I used it's a quick print as well. I was happy enough with the…
Styled after the Thyrm Switchback line of flashlight accessories, this 3-piece print goes together to give your Convoy S6 a functional pocket clip as well as a finger ring for a secure hold in tactical (or tacticool) situations! Assembly…
An M-Lok attachment for a flashlight or any round accessory for your rifle. This works for a flashlight which is about 25mm in diameter (close to 1"), but can probably be modified to fit other sizes. Required hardware: standard M-Lok…
A clip for your hardhat to hold a flashlight. It has a 3/4" clip and angled at 15* for better vision.
21mm Picatinny Laser/Flashlight mount was has a Ø19mm pipe (Ø19,2-Ø18,80) What you need: -2pcs M3x10 screw and 2Pcs M3 nut -1pcs M4x30 screw and 1pcs M4 nut Print from PETG, 4wall, 5-5top button, 20-40% infill
M-Lok Flashlight holder. This is designed for the $13 flashlight (588 Lumen) that they sell at Harbor Freight. https://www.harborfreight.com/588-lumen-tactical-flashlight-63934.html You'll need to get M-Lok screws (Amazon has them) and…
A quick holder for a common flashlight or anything with a 28mm diameter. Designed to be a quick print. NOT Vase mode compatible.
Olight Baton 3 pro dual Flashlight holder (front indicator)..just that
Olight Baton 3 pro single Flashlight holder (front indicator)
A rechargeable flashlight cap, to be used with 3dprintingworld's Collapsing Lightsaber (Removable Blade) . The light automatically switches on when drawing the blade. Also needed: – Subminiature Microswitch (TS0101F020P) – YAGE Mini LED…
LED flashlight holder for RIS rail with screws. Perfectly fits HDR50 (Umarex) on the top rail. Fits flashlights with a diameter of approx. 24.5 mm. In addition, 2 cylinder head screws M3x30 (preferably black because of the optic) are…
This is a Nerf rail modified with a saddle to hold a cheap standard 1" (25mm) LED flashlight/torch. Appreciate that there are a few cable tied rails already designed, but wanted something a bit different. The saddle is less universal fit…
this is a simple flashlight mount for an mlok rail. it fits a 21mm flashlight and mounts with normal sized zip ties. printed %100 with petg no supports
I couldn't find a good mount that fit on my Sig Sauer P250 which was almost a standard NATO rail but a little different. I also wanted to make something that allowed me to print a couple for different light sizes, and be able to easily…
AK74 Flashlight mount for Airsoft diameter of the light aperture 28,5mm material PTG
Introduction. This has been initialy developped in order to have Gridfinity boxes for a few of my flashlights, (CONVOY, OLIGHT, …) but in the end it's of course working for any kind of rounded item ( glue sticks , flasks , bottles , any…
This is a quick and easy solution to have a light source on your key chain. You will need a CR2032 cell and a 3mm or 5mm white LED Slightly widen the gap between anode and cathode of the LED so it is bigger than thickness of the CR2032…
This is a remix of my Milwaukee M12 system flashlight adjusted to Bosch 12V system battery. It has a head with an adjustable angle, made from MR16 led bulb. BOM To assembly it, you will need: 3d printed lamp head. 3d printed upper piece…
Flashlight mount for airsoft, nerf, or even real steel firearms if you're willing. Uses two releasable zip-ties and one 21mm flashlight ( on Amazon here ). This would be very easy to model to fit a different size flashlight with your…
Tactical mount for 20mm diameter flashlight. 0.2 layer height Print in ASA or ABS.
Remade the FlashlightBottomCap since the file is not there for this. I am making this for Christmas, so I needed it :)
This basic, simple double clamp is designed to mount an AMAsky flashlight to a Mossberg Maverick Model 88 12 gauge shotgun. The flashlight diameter is 21mm and the barrel of the shotgun is 22.5mm. Any shotgun or flashlight with those…
HINT Print this vertically like the orientation in my wall-mounted photos. This will ensure optimum strength. If you print it with the flat side down - it will be much more prone to breaking. A holder for Maglite D-Cells that is strong…
Molle Mount for a 30mm Flashlight (Nextorch TA-30) and a glo-toob (marker-light) Both fits on the Molle Webbing Plate. No Supports needed. When printed the gloo-toob holder cut the 1 perimeter thick layer between the clamping. Other…
Flashlight holder for molle sling. Allows you to use the lantern as a beacon. It is applicable for two types of lanterns, see the screenshots.
This accessory slides onto the end of the Wuben G5 flashlight and serves in place of the keyring or lanyard hole, allowing use of the magnet feature without obstruction. Just slide this onto the magnet end of the Wuben G5 and attach to…
I wanted a flashlight holder for my NERF gun, but the one I tried printing just didn't work for me. So I remixed it. I have made this so that it does not require any supports to make printing easier. Printing Settings: Resolution : 0.2…
See it in action - https://www.youtube.com/watch?v=6uOr2lsWAE8 Current sizes: 14mm - Lots of AAA sized lights 24mm - Wurkkos FC11, S2+ 25.5 - FW3A 26.6 - S21A 28mm - Emisar D4V2 28.5mm - Noctigon KR4 (even though the bezel is 29mm, this…
Pocket LED Flashlights These are great little flashlights for short little tasks where you only need a little bit of light for a few seconds. The banana in the first image is there for scale. Keen observers will notice that it's not a…
This is a flashlight for Milwaukee M12 battery. It has a head with an adjustable angle, made from MR16 led bulb. BOM To assembly it, you will need: 3d printed lamp head. 3d printed upper piece of the body. 3d printed lower piece of the…
Fits my Slyde flashlight, but will fit any flashlight ~29-32mm at narrowest point.
For best result PETG or better, 6 layers top and bottom, 6 walls, infill 35%+ cubic. No support needed. orientation as in the photo with these parameters, it will withstand a direct hit from a ball, 1.7 J. I haven't tested higher. You…
Taschenlampenhalterung Rundhalterunf für Gopro Mount. Ich habe die STL in verschiedenen Durchmessern erstellt. Sie benotigen noch eine Mutter M5 und eine Passende Schraube oder eine Gopromountschraube Flashlight holder Rundhalterunf for…
I remixed this part to fit my Winchester SXP Defender Shotgun magazine tube. Might fit others as well. Still uses the same M3 hardware as the original design. Here is a link to the hardware and flashlight I used: Metric Screws:…
Picatinny flashlight mount. uses medium zip ties. no supports 100 percent infill abs or petg is best.
Print in PETG without support.
This is a custom design flashlight mount for my bike with 31.8mm handle bar. You can use it as a GoPro or similar action camera mount as well. You need: Handlebar Bottom Bracket (1x) Handlebar Upper Bracket (1x) Flashlight Bracket (2x)…
Zip tie this to your bike to allow you to quickly mount a flashlight. Just use a little piece of rubber they usually include in these types of things to keep it from rotating/sliding. I've uploaded a larger version so you can cut away…
120x120 mm softbox for a Godox v860II flashlight. The design comes in three parts: the box, the frame and the diffuser. You can use a tissue (Kleenex), a white nylon fabric, one or two layers of tracing paper, white baking paper works…
Flashlight holder with gopro mount. Made it for holding my OLD Ultrafire C2 LED flashlight on the top of my mountain bike helmet where I have a gopro mount. The holder if made for a flashlight with a 24mm diameter body.
[UPDATE V2]: V2 is now out of testing and available to print. It is much sleeker and quicker to deploy thanks to spring loaded legs. The hanging lantern mode is still preserved via three separate cords attached to each leg and tucked away…
I wanted to make a cool larp ingame light based on a flashlight that looks awesome on an alchemist table, altar, ritual ground etc. For this purpose I used those standard ali express led flashlights you can get in many colours and which…
Please, share your feedback if you like this model! Made for standard 31.8mm (1.25") diameter MTB handlebars, 22mm adapter is included to mount it near the grips. Allows to angle the flashlight both up-down and left-right. Suitable for…
Rail mount for 27mm flashlight in two heights Category: Sport & Outdoors
Made a flashlight holder to mount my DULEX 395-410 nm UV Led to Skadis.
This is a clip that allows you to attach a Boruit V3 flashlight to an article of clothing such as a baseball hat for handsfree operation. When attached in reverse, it acts as a button lock. https://www.buymeacoffee.com/CaptainMisclick
**edit: take a look at the improved remix by firebirdrx here: https://www.printables.com/model/1250183-dji-neo-flashlight-mount-taschenlampenhalterung This is a quick, no support print that latches on to the USB port and inside the gimbal…
Flashlight Mount for Picatinny Rail system. Created specifically for Hatsan Flash QE PCP Air Rifle, but may work with others. The specific flashlight is LED, rechargeable, and can be purchased on Amazon for about $13 at this link .…
Diffusers for common enthusiast flashlights. The diffusers can be flat top or Printing Some of the lights can generate a lot of heat, as such you should print the diffusers in a hight temp plastic like PETG. For Flat Top diffusers print…
Since I couldn't find a mount that fit my flashlight and molle system, I designed one myself. One part is placed on the flashlight while the other is placed in the Molle. The two parts can be connected to each other with a twist. The 4…
An M-LOK flashlight mount for sizes of around 25mm. You need two zipties.
You can buy this diffuser from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the light…
I recently got myself an IR flashlight to use with my DIY NVGs but I had no way of attaching it to my helmet, and there seemed to be a lack of them out in the 3D Printing world, so instead of paying €15, I modelled my own one. It holds a…
The cap on the flashlight cuts off the light so you won’t dazzle with strong light. It does not reduce the flashlight’s range, but only cuts off the upper half of the light beam. On the attached photos, you can see how it works. The first…
A bracket for the Parkside HG06412 LED flashlight with hooks for use in wall-mounted sales in LIDL supermarkets. Perhaps it can be used in products from other manufacturers such as Ikea, but I do not know. The separation between hooks is…
A rechargeable flashlight cap, to be used with 3dprintingworld's Collapsing Sith Lightsaber (Removable Blade) . The light automatically switches on when drawing the blade. To bring balance to the force I made this version for the Sith…
I designed this thing so I could use 18650 Li-ion batteries in one of my small flashlights. The flashlight is the kind that takes 3x AAA batteries in a removable holder, with a tube/cap that have ~M24x1.25 threads. This particular…
it is a flashlight holder for a tactical rail
Was / What Dies ist eine Gürtelhalterung für die sehr verbreiteten Paralux Taschenlampe im THW Stil. Die Taschenlampe klickt in die Halterung und sitzt dort perfekt bis du sie brauchst - dann ist sie schnell zur Hand. Passend für Paralux…
Molle Flashlight mount for Streamlight ProTac-HL-X. Printed in MatterHackers Ryno Pro. Sliced with Cura at .2 layer height, 100% infill, 5 walls, and used Fuzzy skin on outside only. I printed it vertically as shown in the picture with no…
Here is a simple belt holster for a Maglite flashlight. It is for one of the larger sized one with the 1 ½ inch (38.5mm) diameter handle. The Fusion 360 file is included if you want to try and edit the diameter for a different sized hole.…
Combination Pistol Grip and Flashlight holder on one rail positioned for easily turning flashlight on and off with your thumb Flashlight mount holds ~14mm diameter flashlight Print Settings Printer: Prusa i3 Rafts: Doesn't Matter…
This customizable handlebar flashlight holder can be attached to your bike handlebars and flashlight using a couple of zip ties. The customizer settings allow for setting the diameter of your handlebars and handlebars, as well as the…
I love my FW3A and I often use it to light whatever I'm working on, but that requires me to give up one hand for the flashlight. Well, I designed this to hold the flashlight for me in any position that I want. The design doesn't use any…
This is a slip in flashlight holder for the Honeycomb Storage Wall. There are two files: one that slips right into the honeycomb itself (which is shown in the pic) called “flashlight_holder_slip-in_big_insert.stl” and another that will…