5,653 models
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
The clearances are designed for printing with a 0.4 mm nozzle and a 0.2 mm layer height. Print with 3 perimeters for proper strength in the joints.
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
[Update] ---2025/10/07--- Reduced the memory size of the body model. ------------------------------------------------------------------- This is a Flexi Tiger Shark. It can be assembled simply by inserting the head part into the main…
If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky Flexi fish mini - cca 6cm long Mini flexi rybka - cca 6cm dlouhá jde tisknout z PLA i PETG / can be printed from PLA/PETG
This is a remix of the sensation that is the Flexi-Rex to represent the Pachycephalosaurus (headbutt dino). It also looks like a Stygimoloch, if that's your preference. Prints just as easily as the Flexi-Rex.
This is a variant on the classic Flexi Rex , with some extra play in the shackles. This gives it extra flexibility, particularly in the sideways direction. The larger slots in the shackles could result in prints of this model being less…
This tool accomplishes a goal that few other tools can: copy bigger complex contours. Place the Duplicator against any curvy contour with the arrows visible and pointing to the contour. Carefully transfer it to the medium (or even a…
Use arachne wall generator + smooth vase mode! A flexible squishy fidget loop designed to be squeezed, stretched, shaken, bent, and manipulated by hand. The model prints in vase mode with a single-wall structure, making it lightweight,…
Print Settings: Printer:Any Rafts:No Supports:No Filament brand:Any (my Aurapol) Filament color:Any Grey and Brown Filament material:PLA Notes: 0,24 / 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters…
Just a stress test made with Flex Rex published here: https://www.thingiverse.com/make:675136 Printed with MK3S / MMU2S Print instructions Don't use MMU2S stock buffer, nothing between printer and MMU is just fine
In the enthousiasm of the flexi models and with my love for cows i've designed this version. I've added two versions, one with only the contours of the cow with the flexi-hinges and one with the famous cow flecks where you have to change…
Great for birthdays, Christmas, and more! happy printing!
Bendy train track for non-standard curves
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Flexi Dino Triceratops Dimension de l'objet 154x72 mm Ep 12 mm
Eine unendlich erweiterbare Schlange.
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Flexi Chat Amélioration des articulations pour un model beaucoup plus souple Dimension 130x98 mm Ep 12 mm
Slim cans or "sleek" cans do not fit well in all cup holders. This adapter has a flexible design to work well in a wide range of vehicles. I have tested in multiple vehicles without any issues. Print using a material that won't melt in a…
The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…
Join here to get access: https://www.patreon.com/kogi3d Material: PLA (recommended) Layer Height: 0.2 mm or finer Infill: 15% or higher Supports: Not required. If you experience any adhesion issues, especially with the head piece,…
This is a small remix of Flexi Rex , adding a loop and the Clip on Holiday Hat . 2-3mm satin ribbon (available at craft/hobby shops) is best for the making loops to attach these to a tree. Wire ties (the type that bind new cables) is OK,…
Flexi Parasaurolophus Dimension de l'objet 128x64 mm épaisseur 12 mm Le Parasaurolophus était un des dinosaures ornithischiens au sous ordre des ornithopodes . Il était bipède et herbivore et vivait dans ce qui allait devenir le Midwest…
Description Show off your Pokémon fandom with these Pokéball-inspired coasters! Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee…
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Use normal supports for overhangs - not for spring. A flexible banana toy with a spring-like body section designed for bending, twisting, stretching, and shaking. The segmented center behaves like a spring, allowing the banana to flex and…
The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…
This remix is based on frez_knee/bandslinger's dog bag container with the Flexi hook moved to a position that allows access to the bags from the side of the leash (rather than underneath) “Left” and “Right” versions are based on which…
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
Life-sized Flexible Forearm 3D Model for Educational Purposes This stunning model of a flexible forearm is not only a technical achievement but also an outstanding educational tool for medical students, physicians, and 3D printing…
Easily printable wrist. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelné zápěstí. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament PLA…
Printable flexible band used instead of rubber / elastic band for Prusa Protective Face Shield. 2 versions of the strap: straight angled Fast printing (about 20 minutes) - PETG Use spatula to remove the prints while heatbed is cold. Print…
VIEL SPASS BEIM DRUCKEN! Um optimale Ergebnisse zu erzielen, stellen Sie sicher, dass der Drucker kalibriert, horizontal und gefaltet bleibt. Und bitte teilen Sie, was Sie gemacht haben! Druckeinstellungen Drucker: PRUSA Mini Füllung: 5%…
This articulating flexi fidget tap dancing drama robot (named after Fred Astaire) is best printed at 140% scale for optimal bed adhesion. Fred will still articulate at 100% scale, but I found bed adhesion to be a problem without brims.…
Cut the thumb grip in half to shorten print time and clean up the look a bit. Printed in Overture Matte Black PLA with no supports on my mini.
Flexi-sentinel inspired by the Matrix movies. The 15 tentacles are fully poseable and the head can rotate freely vs the tentacles. Print-in-place without brim or supports. I did end up using a glue stick to ensure adhesion. I was able to…
This is a remix of IXPatch's excellent remix of Crafty Sven's excellent articulated guardian, with detachable arms.
Kleiner Wackelzahn. Beispiele wurden aus PLA gedruckt. Viel Spaß damit, ünber ein Like würde ich mich freuen.
Flexi Dauphin pour compléter votre collection… Taille par défaut 128x69 Ep 12 mm
Print your Zoo of the flexi rex, each is 25% bigger than the previous! The larger ones have a relatively smaller gap between the links so that the head sags less. (The disadvantage of this is that the dino can no longer stand on the…
Since I had the challenge to somehow organize all the stuff that came together over the time by building and tweaking 3D printers, I was looking for the perfect storage system. But actually most of the systems were either too big or by…
This is a print in place flexible whale that is fun to play with. I designed this from a picture that I found online. This is one of the first flexible print in place models that I have made. I printed the gray one first then I liked it…
Same as the original with hidden screws but cut down to four sheets and scaled up so you can put your sheets in landscape orientation. Print instructions Rotate the object by [0, 0, 33°] and print the infill with an angle of 78° .
This cute Dolphin in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
This cute Bat in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy, decoration…
Turtle Pope v2 With movable feet and head. Print in place. Some supports might be needed. Gcode included for 0.4 nozzle with var layers and supports. Non standard startt sequence and first layer speed. Makes Turtle Pope v1 obsolete.
The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while…
The SUNLU changeable filament spools (~63mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…
This reusable zip tie set is designed for PLA and can be opened and reused multiple times without breaking ♻ ⚡ Each zip tie uses only ~0,7g of material and takes about 4 minutes to print, making it fast and efficient to produce. 🔧 Perfect…
This cute Chameleon in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
As in the topic at the top. Key ring for keys or anything else. Key ring can be printed PLA, PET-G for sure as you can see in the pictures. The maximum reduction is 45 mm in height. The ones visible in the photos are 55 mm high. They are…
Connector between flexible ventilation duct and 80mm fan
Dimension du model 127x57.5 mm Epaisseur 12 mm.
After switching up desks, we wanted clips like we used to have for our old desk to manage our pc cables. Taking inspiration of what worked we started from scratch. The big top hole is to place more permanent cables, like for you monitor.…
This cute Otter in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Easily printable Index finger. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelný ukazováček. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament…
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
This cute Ankylosaurus in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
This cute Turtle in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
This cute Seahorse in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
FEATURES Super satisfying sounds, flexible and fun to fidget! Contains cute craters! SEE & HEAR IT IN ACTION! https://youtube.com/shorts/-M0k1IFCxOE?feature=share CONNECT WITH ME ❤ LIKE & FOLLOW if you want to see more from me 📷 SHARE…
Ist aus dem spiel was sie auf Chrom offline spielen können.
Flexi Pieuvre Dimension de l'objet 228x198 mm Epaisseur 12 mm. Impression un peu longue c'est vrai, je recommande une remplissage supérieur a 20% et de qualité.
remix of a tie by @maker81, made from chainmail. updated in the slicer to fit.
This is the Flexi-Rexy from DrLex and I made it way bigger.
The cubes measure 4×4×4 cm. There are 2 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. Inside there are molds for different objects. The cube develops fine motor skills, vocabulary (create stories),…
This cute Lama in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
About the HIVE After many hours of modeling and especially printing. I finally present to you the HIVE system from KMS. Inspired by the bee itself, so bee flexible use the HIVE ! The system has two main components: The honeycomb (HC)…
This cute Mammoth in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
This cute Hippo in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
This is a flexible mounting system for pcbs/panels onto the LumenPnP pick&place machine. It's composed of a base mounting plate with fixed brackets for one pcb corner plus movable support sliders for the remaining pcb edges. A grid…
Just a little flexible hexagonal “JWST” ornament/patch/bauble/fidget/coaster piece I accidentally made while test printing swatches for another entry to the “Printed Fabric” contest: https://www.printables.com/model/1452441-flexihex-bowl…
The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while…
Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a Shamrock. In the pre-sliced models fuzzy-skin…
Tardigrades, also known as water bears or moss piglets, are one of the most extraordinary creatures on Earth, demonstrating a virtually unparalleled resilience. These microscopic animals, which measure between 0.3 to 0.5 mm on average,…
pokémon gigantamax mowth klíčenka
This cute Giraffe in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Remixed the original NinjaFlex design to work with hard plastics like PETG. Uses a twist and lock mechanism utilizing the two notches on the bare analog stick. Printed with no supports, .15mm layer height, and 15% infill with PETG. Takes…
easy print in place model
Flexi Rhino I created in PrusaSlicer using my flexi tool I printed in PLA with ironing turned on, any rigid material will work. Credits Silhouette SVG from: Vectors by Vecteezy - https://www.vecteezy.com/free-vector/animal-silhouette
Model is designed similarly to other flexi models and does not require any support. Works great when using the ironing setting to produce a smooth top surface. I made the shoe outline and logo to sit higher than the rest so you can add a…
Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a very large beverage. Impressively given the…
This cute Elephant in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Molecular surface representation of a mammalian alpha-amylase (PDB ID 1PPI) and its substrate amylopectin. The sugar component is printed in flexible TPU and can be inserted and removed from the amylase catalytic site. The model is great…
Use supports for the top lid. You need to open the access ports necessary for your setup with a N#11 Xacto knife, for example throttle, right aileron, Sbus an DSM Satellite, this way ports you do not use are covered. Close with 4 M2x10…
This cute Anteater in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Introduction Give your amigurumi characters expressive, securely mounted eyes! These 3D-printed half-ball eyes feature a ridged stem and a matching TPU (flex) cup that locks them in place from the inside of the head. The flexible cup not…
The SUNLU reusable filament spools (~58mm center hole, detachable parts to refill wound filament) have slightly different diameters on their left and right side. This makes adapters with fixed diameter to fit very tight (hard to remove…
The tie is fastened to the first button of the shirt. the knot has a joint to slide the button inside. how to print a christmas tie first print plate with inside (green) of the tie and knot connector second print plate with outside of the…
The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
