Search results: foam

Sort order

829 models

P
PrintablesPrint Keep

PK Squire - DIY Foam Dart Blaster

⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ Print Keep Squire is a beginner-friendly, front-loaded single-shot foam-dart blaster, designed for those eager to venture into the exciting world of 3D-printed blasters! Its my first…

Downloads
4,010
Likes
1,744
Rating
4.95
P
PrintablesCulinaryDiver

PET Bottle Foamer for Garden Hose and Modular nozzles - VENTURI INJECTION

This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…

Downloads
2,087
Likes
1,409
Rating
4.6
P
Printablesfluetke

Mounting bracket for acoustic foam (25mm & 50mm) v2

This improved version of the acoustic foam mounting bracket has been improved by adding in a structural beam to keep the mounting clamp from sagging under the heavier load of wider and denser acoustic foams. In combination with 3M Command…

Downloads
80
Likes
16
Rating
5
P
Printablesdereksrose

Foam Noodle Connectors

My wife recently started using foam (pool) noodles for quilt layering. But she found the noodles were usually too short to be up to the task. She asked me to whip something up to save a trip to the hardware store to get the PVC pipe…

Downloads
53
Likes
14
Rating
0
P
PrintablesMolot

Tube to foam clip

When you make expanding foam background, it is sometimes problematic to install drip tubes - they tend to slide and don't want to stay in place, hindering the curing of silicone. I needed the tube to stay where I wanted it. I have seen no…

Downloads
29
Likes
7
Rating
0
P
PrintablesSteveW91

Sound Booth Foam Insulation Corner Structures

Rather poorly implemented design by me but hopefully someone else can help make it better!

Downloads
28
Likes
12
Rating
0
P
PrintablesHarabi

Printed foam board holder (Simple and Final Fantasy)

I have a FFXIV map printed on foam board. The original holder is bad, it sticks out too much and over time the bottom has started to warp. So I designed a holder for the four corners instead. Mine is 5mm thick I don't know what thickness…

Downloads
21
Likes
3
Rating
0
P
Printableshazrpg

Foam Blaster / Nerf blaster-like fore-end replacement handle (makes it more like a shotgun)

This was a project I did for my neighbour's kid who had the handle (fore-end) of his nerf blaster-like toy. This fixed it and actually made it much better than the original was! I've included everything that I used including the .obj…

Downloads
10
Likes
1
Rating
0
P
PrintablesOxyfraggle71

Bracket for foam injector (compatible with pressure washer Kränzle K1050 TST)

For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…

Downloads
8
Likes
1
Rating
0
P
PrintablesFlygonial

The Gryphon (Foam Dart Blaster)

The Gryphon is a mostly 3D printable, hobby-grade, Nerf semi-automatic flywheel blaster. Its main design features are as follows: Uses 130 to 180 sized 20.4mm , brushed DC motors. Semi-auto by rack and pinion with 1:3 gear multiplication.…

Downloads
5,180
Likes
1,496
Rating
4.94
P
PrintablesBrooklyn Tony

SRP-2 Recoiling Foam Dart Blaster

UPDATE 8/17/2023: Updated Build Guide from v0.1 to v0.2. This includes more information and links in the electronics and internals section of the Parts List, more specifically adding the specific battery needed to fit inside of this…

Downloads
3,600
Likes
1,574
Rating
5
P
PrintablesWhity

Fluke - Rugged Case with foam insert

The case is based on my parameterizable " Rugged Box ". Inner dimensions: 130 x 185 x 65 mm (Bottom height: 50 mm) Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a…

Downloads
3,165
Likes
600
Rating
4.97
P
PrintablesBrooklyn Tony

SLARP Lever Action Foam Dart Blaster

I am going to preface this by saying that I am not putting together a full build guide, this is literally just all the parts I altered, this was literally a personal project that I decided to share because of the feedback I received. You…

Downloads
3,142
Likes
2,140
Rating
5
P
PrintablesBMPrintShop

Zc Aus - Ultra Compact Powerful Nerf Foam Dart Pistol - Up To 170FPS

Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! The Zc Aus is a pocket-sized, high-powered, mag fed (5-13 dart capacity) foam dart (Nerf) spring-powered…

Downloads
2,257
Likes
1,024
Rating
4.83
P

Parametric Styrofoam EPS XPS Foam Screw Anchor

This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…

Downloads
2,167
Likes
863
Rating
4.96

N-HK d.U.M.P. Full Auto Foam Dart Nerf Gun.

here are the beta files for the N-HK d.U.M.P. It is a full auto nerf blaster that uses angled talon mags. It uses the same basic hardware as my N-AR and others. You will need a m5x50mm to attach the stock and a big soft spring for in…

Downloads
2,104
Likes
912
Rating
0
P
PrintablesGP3D

Torrent RS2 - Foam Dart Blaster

Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…

Downloads
2,026
Likes
1,102
Rating
4.49
P
PrintablesBrooklyn Tony

NSK-X Foam Dart Blaster

UPDATE 12/6/24: HW kits and completed blasters now available through GTCCreation . UPDATE 2/25/24: Updated flywheel cage with tighter motor slots (thanks to Chance for the dimensions) to improve dart accuracy and reduce barrel strikes.…

Downloads
1,831
Likes
1,003
Rating
5
P
PrintablesLeedle Dynamics

Lanka Foam dart blaster

I took down lanka on etsy due to being just a bit too outdated and the new terms of service on etsy no longer allowing me to have more realistic shapes, so i decided to throw it on here.

Downloads
1,618
Likes
325
Rating
4.75

FLP-07 Goblin Silly Shell Single Shot Foam Blaster

This is the Goblin, a single shot break open Silly Shell fed foam blaster. It can fire any ammunition type that can fit in a Silly Shell; you'll get solid performance from multi-dart shells, up to over 200 fps out of a sniper shell. You…

Downloads
1,368
Likes
633
Rating
4.84
P
Printablesjbaekey

Foam (Nerf) Dart Replacement

These Elite compatible darts resist the deformation that occurs with foam providing better accuracy and less jams. These darts are best printed in the most flexible TPU possible to allow the best barrel seal and less pain for those acting…

Downloads
1,142
Likes
185
Rating
5
P
Printablesalexander

PET Bottle Foam Gun for Garden hose. Constant Soap dispenser.

You will need a type of valve on the hose, like i have in picture. Model need 1 o-ring on gardena plug and 1 big o-ring inside nozzle or else user WILL be wet. I use o-rings but designet a TPU seal too. I have testet TPU seal and it…

Downloads
1,020
Likes
423
Rating
4.6
P
PrintablesBrooklyn Tony

NSP-1k Foam Dart Blaster

UPDATE 2/1/2024: Uploaded and set better cover photo. UPDATE 8/16/2023: Edited Contact Me portion of description to specify how to DM me. I will generally not be accepting random friend requests, so please join the /r/Nerf Discord server…

Downloads
982
Likes
306
Rating
5
P
PrintablesDHP

Dowel for Styrofoam (Dübel Wärmedämmung)

This dowel is to fix things in very soft materials (styrofoam) with or without a cover layer. It is similar to the Fischer FID 50 K dowel. Print Settings Printer Brand: MK3 Printer: Prusa i3 Supports: Yes Resolution: 0.3mm Infill: 100%…

Downloads
959
Likes
119
Rating
4.92

Foam Core Spray Paint Booth

Save your lungs. Stop the overspray! Everyone wants a spray booth but rarely buys one. They are expensive and take up a lot of room. Here is a quick solution that takes very little time, money or effort. It takes minutes to put up and…

Downloads
924
Likes
178
Rating
5
P
PrintablesDepep1

NOFOAMS - RC AIRLESS TIRE INSERTS (PARAMETERIZED)

Why use NoFoams (or any other 3D-printed foam alternative)? They allow for more tire conformity while stopping the tire from rolling over too much when side-hilling or turning. Designed for use with scx24/ 1/24th scale rc cars however, I…

Downloads
880
Likes
183
Rating
5
P
PrintablesMalcolm

Kaizen Foam Cutter - Spinner Set

Cuts Kaizen foam for tool storage, clean up the base of pull apart foam. Use in drill. Not my design, remixed from FastCap design. The idea is to make smooth cuts into the Kaizen foam with the sharp end of this print. You might need to…

Downloads
778
Likes
71
Rating
5
P
PrintablesAcontraveta

Expansive Foam spray nozzle

Replacement nozzle for expanding foam spray. With universal thread for all brands I have tried. .No supports needed. .Quick printing. .Minimal material consumption. -One-piece print.

Downloads
774
Likes
56
Rating
4.67
P
PrintablesEgghebrecht

Solenoid Gryphon Foam Dart Blaster

Welcome to the Solenoid Gryphon Blaster Project This project is a remix of the original Gryphon made by Flygonial https://github.com/Flygonial/The-Gryphon-Foam-Dart-Blaster Project originally started by Taffy and Ciela in Fusion 360 and…

Downloads
748
Likes
138
Rating
5
P
PrintablesAce_Archer

$3 Airbrush/Spray Paint Booth - Only 2 Sheets of Foam Board and Hot Glue!

A whole airbrush/spray paint booth for $3?! Yep! (well, mostly 😉) (somewhat of a WIP, will update with more images once my own build is complete!) I wanted a spray booth for working on tabletop gaming miniatures, but didn't want to spend…

Downloads
742
Likes
245
Rating
5
P
PrintablesCorvus

Silly Shell --- 6x Short Darts --- Airtight Barrels (3x2 Short Darts / 18x Foam Balls)

Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…

Downloads
720
Likes
111
Rating
4.88
P
Printablessmysnk

Spray Foam Replacement Nozzles

Spray Foam replacement nozzles so that you can re-use partially spent cans. Category: Parts

Downloads
685
Likes
73
Rating
5
P
PrintablesNotForEveryone

Disney Foaming Soap Dispenser Mouse Ears

I had this model up on another site but I have now removed it in favor of this one. I am uploading multiple versions of this. One that inserts into the mouth of the bottle that I have found to work well and then others I was experimenting…

Downloads
668
Likes
144
Rating
3.25
P
PrintablesAlex

Gardena foam gun

You will need gardena O ring 5mm diameter drinking straw bottlecap with a 10mm hole and the bottle thread sealing tape superglue you can turn the nozzle to adjust the flow and to turn off the flow also. superglue the bottle cap connection…

Downloads
653
Likes
109
Rating
3
P
PrintablesCoolbruh

5mm Foam Core Corner Brackets for Photo Backdrop

A simple corner bracket for 5mm foam core board. I wanted something a little better for taking pictures but didn't want to spend a ton of money. I picked up the foam core boards from walmart for a couple of dollars each and it did the…

Downloads
646
Likes
275
Rating
5
P
PrintablesWhity

Revopoint Mini - Rugged Case with foam insert

The case is based on my parameterizable " Rugged Box ". Inner dimensions: 207 x 160 x 67 mm (Bottom height: 50 mm) Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a…

Downloads
646
Likes
140
Rating
4
P
PrintablesPrint Keep

PK Knight-L - DIY Foam Dart Blaster

⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ 🔷The Knight Platform The PK-Knight is a high-performance, open-source springer developed with competitive foam dart play in mind. It was designed and tested for more than a year —…

Downloads
628
Likes
177
Rating
5
P
PrintablesEchoDeltaMike

IK Foam Pro 2+ Battery Holder V2 for Mi Mijia 2

For photos of the original, dimensions and so on, please check V1. Top tip: Although the unit looks great in matte black PETG, you could get creative with color coding to easily know which product is inside ;-)

Downloads
624
Likes
43
Rating
5
P
PrintablesLeedle Dynamics

Hush Foam Dart blaster

The old hush, i thought id throw it here after my etsy got nuked and its quite old and outdated, but maybe youll get a kick out of it. takes anything between 4 and 6mm strings and uses worker talon mags, needs a tall buildplate and will…

Downloads
620
Likes
173
Rating
4

N-AK foam dart blaster

Here are the beta files for the N-AK. A reciprocating bolt ak style foam dart blaster that uses standard nerf magazines. It uses the standard tt gearbox common in the worker full auto kits. It uses mostly 8 to 12mm blaster screws/m3's but…

Downloads
600
Likes
151
Rating
3
P
PrintablesBeek

RC-Scaler Tire Foam 1.9

Dies ist eine Reifeneinlage für 1.9er Reifen von RC-Scalern. Sie sind ausgelegt für einen TRX4 mit ca 4,5 kg. Gedruckt habe ich das ganze auf einem Prusa Mini+ mit Saintsmart TPU 95A ohne Infill und ohne Stützen in 0,25mm Draft. Natürlich…

Downloads
588
Likes
67
Rating
0

N-AKM Foam Dart Nerf Gun Blaster

Same as the N-AK but with cosmetic changes to a few parts as to mimic an akm.

Downloads
582
Likes
211
Rating
0

EVA foam scale maile chainmail

Taking off from my last thing, chainmail from eva foam here: https://www.thingiverse.com/thing:3619166 I figured it would be good to have scalemail as well. https://youtu.be/-aKghdysy7Q Lasercut, cricut, cnc, or flexible filament 3d…

Downloads
577
Likes
108
Rating
0
P
PrintablesFaceHaver

Air Rifle Suppressor - for felt/foam

Air rifle moderator, for use with sound dampening felt or foam . 193mm overall length, the tube is 185mm long, 40mm outer diameter, 36mm inner diameter, each cap extends 4mm out of the tube. Inspired by the many aftermarket designs that…

Downloads
568
Likes
73
Rating
0

N-AR Foam Dart Blaster

These are the beta files for the N-AR full auto foam dart blaster. It fires short darts from talon mags. The faux bolt cycles with the pusher and with the charging handle. The build is based on the following screws and springs, Not sure…

Downloads
565
Likes
168
Rating
0
P
PrintablesJohannes

M6 screw anchor into foam insulation

print with petg and use a drop of adhesive of your choice to combine a pair.

Downloads
555
Likes
64
Rating
5
P
Printablesgrizzie17

RC Slow Flyer Plane Hybrid Foamboard

Foam Board hybrid RC plane designed to help teach my grandchildren how to fly (interpret that as strong but it won't bother me if I have to make multiple). It has an under-cambered wing, so it is a slow flyer (which is also good for…

Downloads
533
Likes
68
Rating
0
P
Printablesprintiq

Foam Cutter

Designed a tool to cut the foam at a 90° or 45° angle. As a blade, it uses some trapezoidal blades with a bigger center hole. To connect the parts together, 1 m3 and 1 m4 screws are needed. For easy switching between 90° and 45° and…

Downloads
531
Likes
74
Rating
4.67
P
PrintablesPrithiv Kumar

Cosplay Foam Cutter

A guide tool to use along side standard boxcutters or cutter blades to help cut perfect, consistent edges for foam, leather or anything else similar. I had been looking around a lot for something like this and altho there are many…

Downloads
527
Likes
32
Rating
5
P
PrintablesLinas 3D

PU Montage Foam applicator

Lost my applicator after getting back after shopping. 3D modelled an alternative. 30min print and you don't have to go back to the store. Print settings: Tolerances Modelled for 0.6mm nozzle while using PLA with Prusa MK3S+

Downloads
521
Likes
42
Rating
4.83
P
Printablesgifd

Phantasm - A brushless foam dart blaster

2026 Update: Phantasm is confirmed to be buildable with the Trifolium PCB and code. You can buy it here . With the lack of Flyshot ESCs this is now the recommended way to build one of these. The included build guide is meant for the DPI…

Downloads
517
Likes
231
Rating
5
P
PrintablesEchoDeltaMike

IK Foam Pro 2+ Battery Holder for Mi Mijia 2

The IK Foam Pro 2+ is a manual handpump that foams car cleaning products. The IK FP2+ comes with a compressed air connector in the box. Find the IK FP2+ here: https://www.cardetail.be/product/ik-foam-pro-2-plus/ or…

Downloads
517
Likes
21
Rating
5
P
PrintablesMike

Foam Board Bracket for Photo Backdrop

This bracket and a mirror image of the bracket are used to position two 3/16 inch thick (4.8mm) foam boards at different angles to create a photo backdrop

Downloads
493
Likes
72
Rating
5
P
PrintablesLeedle Dynamics

Scallop | Low Hardware Magfed Foam Blaster

Note: the mags in the glamour shots are not included, find the files for those here This is an earlier blaster of my string driven plunger designs so it has some weird attributes like an oversized plungertube and other frankly stupid…

Downloads
486
Likes
261
Rating
3.33
P
Printablesnick

foam runner

its the right shoe mirror for left

Downloads
468
Likes
16
Rating
5
P
PrintablesSASSy Design

Sea Foam Summer Pot and Planter - Vase mode

An easy and simple summer pot inspired by the structure of sea foam. Printing settings: Vase mode - 2 or 3 layers Filament - Fiberology Easy PLA Light gray

Downloads
462
Likes
185
Rating
5
P
PrintablesMilda2107

RC Foam Tyre Inserts

RC Foam Tyre Inserts - for Proline Hyrax 120mm. Rims with two rows of weights. Printed from Filament PM - TPE 88 RubberJet Flex Its for heavy cars. My car is about 7kg. I expect an improvement in the side tilt compared to the original…

Downloads
449
Likes
93
Rating
0
P
PrintablesMarmaduck

Airsoft Octagon Slim Suppressor Foam Ready (MTW)

I recently bought a Wolverine MTW and wanted to have an integrated/nested suppressor in the handguard, but the more I looked the more I had difficulty finding one that would fit AND that I liked. The internal diameter of the MTW's…

Downloads
438
Likes
60
Rating
5
P
Printablesmeub

SwarmTurret: WiFi Controlled Foam Dart Turret

I built a 3D printed foam dart turret with streaming video controlled from any web browser on the local WiFi network. It's powered by a raspberry pi 4 and three servos for the X axis, Y axis and firing control. You can see a video of it…

Downloads
416
Likes
83
Rating
0
P
PrintablesCranklotus

1.9 and 2.2 RC Wheel Insert to replace foam

Rough insert to be printed in TPU for RC tires.1.9 and 2.2 size, 2.2 is for narrow 4.70" tire. One design with thicker inner ribs works better for heavier rigs. Designed for crawling. Two sizes. Please remix and change it up and post.…

Downloads
405
Likes
46
Rating
0
P
PrintablesTofuKat762

SLARPbine Lever Action Foam Dart Blaster

If the SLARP doesn't have a build guide, this is ostensibly worse. All the parts from BOM are the same, but the lengths of the steel rods are entirely arbitrary, shortened to fit. Changes: I have remixed the SLARP to be more “performance…

Downloads
401
Likes
400
Rating
5

N-CZ "The Stinger" Foam Dart Blaster

Here are beta files for the N-CZ the stinger. It Is based on the same design and hardware as the N-AR and the N-TM1. It is 40mm daybreak/kepler. This is the first model that the pusher is not tied directly to the bolt, So you can simulate…

Downloads
382
Likes
149
Rating
0

RC Track Barrier compatible with Mini-Z foam border

This is a printable set of track barriers that can hook into the mini-Z foam borders if desired. Good got 1/16th and 18th scale RC tracks. The turn is a 24in radius. segments are about 200mm long each part can be screwed to the floor with…

Downloads
379
Likes
53
Rating
5
P
Printablesmads7922

MJJC V2 Foam Cannon Wall Mount

Basic wall mount for the MJJC V2 foam cannon. The design is very basic, so feel free to remix it however you want :)

Downloads
378
Likes
43
Rating
5
P
PrintablesBluest_G

Schmetterling - Foam Dart Flywheeler

Schmetterling is officially released! Schmetterling is a compact and modular flywheel blaster platform designed with modularity, ergonomics, cosmetics, and repair-ability in mind. Schmetterling 1.0 is designed from the ground-up as a…

Downloads
373
Likes
138
Rating
4.8
P
PrintablesMatro3D

Any Surface Desk / Car Cable Clip (Foam Tape)

Needed car clips for my dashcam. Requires foam tape (I used thin VHB foam tape) Print on its side. If youre using it in a car id reccomend using PETG instead of PLA.

Downloads
373
Likes
46
Rating
4.33
P
PrintablesOcho Camino

Catan Seafairers - pirate ship - no seafoam so sails can be player color

I wanted to make the sails the player color rather than the ship. The seafairers multimaterial ship has the foam under the ship shared with the sails so that'd make the foam look funny. I edited the Tinkercad source files to remove the…

Downloads
358
Likes
83
Rating
4.83
P
PrintablesKevin Levy

Foamboard Box Corners - custom board game box, lightbox, insulated enclosure

These corners are designed to allow you to make a hinged box up to any size foam core board that you have with no glue required! Scaled to use standard Dollar Store size foamboard, I believe it could also be scaled to work similarly with…

Downloads
344
Likes
71
Rating
4.5
P
PrintablesVoyMakesMinis

Foam Hot Wire Table

Here's a simple DIY, 90% printable foam hot wire cutting table for hobbists who want to make stuff out of foam. This low-power tool is simple to make, and allows you to cut foam of various thickness. Of course, the thicker the foam, the…

Downloads
343
Likes
180
Rating
5
P
Printables404

'Amoeba' Brushless Foam Dart Blaster

WARNING! THIS BLASTER UTILIZES COMPONENTS AND WIRING THAT IS MORE ADVANCED THAN A TYPICAL BRUSHED BLASTER BUILD. BY PROCEEDING WITH THIS BUILD, THE END USER ASSUMES ALL RESPONSIBILITY FOR ENSURING PROPER FUNCTION AND OPERATION OF THIS…

Downloads
339
Likes
106
Rating
5
P
Printables404

[DEPRECATED] 'Nucleus & Hydrus' Brushed Foam Dart Blasters

DEPRECATED, BUILD JPHAGE INSTEAD. V2 COMING SOON Introducing the Nucleus, my take on a pistol size format CQB competition blaster. This blaster shares the same cage and BCAR setup as the Voidrunner, but uses the aesthetics and 4:1 geared…

Downloads
338
Likes
107
Rating
5
P
PrintablesMidwest Designs

Cutlass Foam Dart Blaster 0.3.6

After over six months of work, I am proud to present the Cutlass. It's a talon-fed pump-action springer using Worker Seagull springs. It used a biased trigger to get a slopless crispy trigger pull. It's compact, has an adjustable stock,…

Downloads
337
Likes
183
Rating
5
P
PrintablesJack

Foam Nozzle

There are a lot of foam soap dispenser on the marked but they all get problems with dish detergent as the pumps get stuck without lubricant and they all stop working after some time as there is only a single very fine sieve which gets…

Downloads
332
Likes
111
Rating
5
P
PrintablesMisplacedMoose

Foamgasm/Chance 15 bearing and 9 bearing BCAR

This thing is a waste of bearings compared to current options. Use this instead Uses either 9 or 15 3x7x3 F683ZZ flanged bearings and 3mm x 14mm pins to assemble. I used Foamgasm's collet and lynx connection and Chance's inline bearing…

Downloads
326
Likes
38
Rating
5

EVA foam chainmail, or flexible filament chainmail

Cosplay Chainmail out of EVA foam. This is the simplest lightest and quickest chainmail for cosplay I have ever made. The bonus is that it looks authentic! Category: Costume

Downloads
317
Likes
74
Rating
0
P
PrintablesPrintVision

Futuristic Foam Prototype

Unleash the future on your printer bed! These ultra-futuristic, euphoria-inducing shoe designs feature a bold silhouette, floating sole chambers, and organic ventilation cutouts – perfect for fashion experiments or decor. 🛠 This is a test…

Downloads
312
Likes
55
Rating
0
P
PrintablesRomanscan

Foamy Labubu – The Joyful Guardian of the Dream Forest

The sweetest and most energetic creature of the Dream Forest is finally here! Foamy Labubu wakes the forest every morning with a cheerful smile. With its big sparkling eyes, adorable tail, and fluffy fur, this paintable figurine is ready…

Downloads
311
Likes
21
Rating
5
P
PrintablesFlygonial

Strix: Brushless Foam Dart Blaster

Bill of Materials (BOM) Build Guide Disclaimer: Open beta v0.1, technically not full release Strix is a brushless foam dart flywheel blaster expressly designed for use in competitive Nerf. Though spiritually related to the Gryphon , Strix…

Downloads
311
Likes
149
Rating
5
P
PrintablesADIcrafts

Nerf/Foam Dart Storage Box + UDL XM1014 Shell Storage BOX

Box for dart storage, best for half length dart. 5*8 storage. Box for UDL 12 CA shotgun shell storage. 4*5 storage. Category: Sport & Outdoors

Downloads
310
Likes
61
Rating
5
P
PrintablesDerrikk

Frontline Foam's Remix of the Party Popper by SillyButts

While we don't sell a full hardware kit, you can get other nerfy hardware available here: Frontline Foam Overview video here: Remix made and published with permission from SillyButts (original fileset from…

Downloads
308
Likes
191
Rating
5
P

6mm foam bevel cutter 45°

6mm foam bevel cutter 45°

Downloads
307
Likes
43
Rating
5

EVA foam chainmail (chainmaille) 2.0

This is a follow up on my chainmail pattern here: https://www.thingiverse.com/thing:3619166 You can watch me use it here in this video: https://youtu.be/1vqiYwD853Y And have Adam Savage show you how to paint it here:…

Downloads
305
Likes
42
Rating
0
P
PrintablesPhosphOr

Pokeball Foaming Soap Dispenser

Extra needed Foaming soap pump Tested pumps Balea Isana Palmolive Sagrotan Schmutzfink You can test your pump with the "Thread test.stl" before printing the complete soap container. Spacer If the pump is not centered, this can be…

Downloads
305
Likes
119
Rating
5
P
PrintablesBeaver

Rainbow - Foam Dart Blaster

It's been more than a decade since our release of the Rainbow , and it has proven to be an effective, durable, and influential design. The design of the catch was a reflection of the fabrication techniques that were common at the time:…

Downloads
300
Likes
134
Rating
4
P
Printables___Sam___

Foam Cutting Hole Saws

A printable HoleSaw drill bit. Suitable for soft materials like foam, if you need a certain size for limited use. This was originally to make circular foam blanks but i decided it might be useful to others as a hole saw, so ive produced…

Downloads
292
Likes
67
Rating
5
P
PrintablesWaikikiprod

Foaming Soap Dish

NEW ! You can Personnalize your Soap withe the Fusion 360 3D File An original soap dish to be printed in 2 parts without any support. The soap water will flow through the letters in the pink cover and it will be retained in the foam tray.…

Downloads
288
Likes
97
Rating
5
P
PrintablesPrint Keep

PK Knight-S - DIY Foam Dart Blaster

⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ 🔷The Knight Platform The PK-Knight is a high-performance, open-source springer developed with competitive foam dart play in mind. It was designed and tested for more than a year —…

Downloads
284
Likes
67
Rating
5
P
PrintablesJacob_Turetsky

Foam Core Rebate Cutter

This design is based on an (unfortunately) obsolete model-making tool known as a Rabbet Cutter. I found myself in need of several more of these tools for an Industrial Design course I was teaching. Here, the tool has been redesigned for…

Downloads
281
Likes
20
Rating
5
P
PrintablesTadeas Tehan

POLYLIGHT 1.0 – LW PLA foaming/expansion test by temperature

Foaming - Expansion test These cubes are for the determination of the flow rate of POLYLIGHT 1.0 - LW-PLA at different temperatures. Based on POLYLIGHT 1.0 Technical Data Sheet , these six cubes are printed from 200 ° C to 250 ° C (higher…

Downloads
279
Likes
8
Rating
5
P
PrintablesKaragula

Foam Cutter 90 or 45

I like printiq's foam cutter! To make it easier to print I split it in half and added pins to align. The original designs channel for the razor blade mount was too small for the 8x32 bolts I had laying around so after my first print I…

Downloads
274
Likes
50
Rating
5
P
PrintablesPrintVision

Ventilated Foam Shoe Prototype

This futuristic foam-style shoe combines ventilation, comfort, and bold aesthetics – perfect for summer lounging or as a visual concept. The design features full-perimeter perforations, a contoured heel, and a softly sculpted sole…

Downloads
273
Likes
25
Rating
0
P
PrintablesADIcrafts

UDL XM1014 Foam Dart/Nerf Blaster Shell Set

Custom shell for UDL XM1014 foam dart blaster. There print options: One-piece: print the whole shell in one piece Two-piece: print shell case and the head separately Three-piece: Shell case, shell head and the seal insert Print guide: For…

Downloads
265
Likes
45
Rating
5
P
PrintablesSoggy _Auggy

The Foam Comb - Universal and Omnidirectional Nerf Dart Picker-Upper

The Foam Comb (Fomb) is a simple printable tool for picking up nearly any dart type no matter their orientation! No need to aim, simply stab the ground with the Fomb to pick up darts and use the bucket fork to offload! The only…

Downloads
263
Likes
82
Rating
5
P
PrintablesVik

Foam Dart Pistol

A pistol that can shoot NERF(TM) foam darts (amongst other things). Needs nothing other than some filament, 3 printed bits, 2 rubber bands and a foam dart. Prints without support. It seems to generate more power than yer average foam dart…

Downloads
261
Likes
25
Rating
5
P
PrintablesJDO solutions

Foam Blaster Duotone Grips (NERF rail & Picatinny rail)

Fore grip with textured inset. Two versions, one for NERF rails and the other for picatinny rails. Still work in progress... Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…

Downloads
258
Likes
29
Rating
4

TARO Foam Dart Blaster

The TARO is a select-fire, Arduino controlled, solenoid-fed, flywheel-powered foam dart blaster. It was designed to provide full-size performance in the smallest package possible and unapologetically present as a flywheel blaster. Aside…

Downloads
257
Likes
106
Rating
5

N-TM1 The Chopper Foam Dart Blaster

Here we have the BETA files for the N-TM1. If You wonder about parts and hardware and such look at the N-AR. This uses mostly the same stuff Other than a 12v auto relay and a 5amp switch. I am only making 40mm daybreak cages from here on…

Downloads
239
Likes
92
Rating
0
P
Printableshehe

30-45-60-90 Degree Foam cutter

30-45-60-90 Degree Foam cutter is a compact 3D-printed tool designed to help you cut Foamboard and similar materials at precise angles: 30°, 45°, 60°, and 90° . Simply insert your blade into the pre-made slots to achieve clean, accurate…

Downloads
238
Likes
62
Rating
5

2022-23 VEX Spin UP Foam Disk

Print with a 0.4 nozzle 0.2 layer height 10% infill TPU 95a 2 walls 5 top and bottom layers

Downloads
238
Likes
0
Rating
0